Database Users

Not so random reboot

My phone for reasons unknown reboots every time I uninstall or uninstall an app and sometimes when it get stuck and lags like no tomorrow...
Running on 4.3 indroid darkfroyo (this used to happen on kyrillos 5.7too)
Fugumod 2.43 beta standard
Class 2 2gb SD card
Partitioned SD card using cwm recovery
System = rfs
Cache = ext2
Data = ext4
Changed using indroid fact app
Anyone know anything about this?
Sent from my GT-I5800 using XDA App

Happens also to me on stock bojpc

What it should b..
/system ext4
/data ext4
/cache ext2
It s laggin due to rfs file system in /system..
____________________________
Tapatalked from my awesome Galaxy3 ..
Rom- Kyrillos Rom 5.7
Kernel- Fugumod Kernel 2.4 beta3 (800Mhz)
www.pocketdroid.net

ranadip.bswas said:
What it should b..
/system ext4
/data ext4
/cache ext2
It s laggin due to rfs file system in /system..
____________________________
Tapatalked from my awesome Galaxy3 ..
Rom- Kyrillos Rom 5.7
Kernel- Fugumod Kernel 2.4 beta3 (800Mhz)
www.pocketdroid.net
Click to expand...
Click to collapse
It used to be ext4
But I found my phone runs faster when system is rfs
And my main problem is the reboots..
Sent from my GT-I5800 using XDA App

JohnstonF said:
It used to be ext4
But I found my phone runs faster when system is rfs
And my main problem is the reboots..
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
anything in particular you do that causes this?
If i could re-produce this i could solve it..Else not.
For lags make sure to disable sensor aiding

rudolf895 said:
anything in particular you do that causes this?
If i could re-produce this i could solve it..Else not.
For lags make sure to disable sensor aiding
Click to expand...
Click to collapse
Installing and uninstalling apps causes my phone to reboot
I'm using the bundled SD card
Partitioned using cwm
Sent from my GT-I5800 using XDA App

JohnstonF said:
Installing and uninstalling apps causes my phone to reboot
I'm using the bundled SD card
Partitioned using cwm
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
you partitioned using CWM which creates ext3 partition not ext4..
So you need to re-part your partition using Minitool to ext4..
Then factory reset and select ext4 for data in Indroid FSC app

rudolf895 said:
you partitioned using CWM which creates ext3 partition not ext4..
So you need to re-part your partition using Minitool to ext4..
Then factory reset and select ext4 for data in Indroid FSC app
Click to expand...
Click to collapse
So what happens if i change data to ext3?
Sent from my GT-I5800 using XDA App

JohnstonF said:
So what happens if i change data to ext3?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
nothing bad happens..
Its just the difference of filesystem
IF you want to use ext3 as data then using Indroid FSC app select ext3 as data

Help with partitioning

Hi all.I managed to partition my sd card (4gb) via cwm recovery.After partitionating i wipe cache partitions and data.
After that my phone boot normaly and i create fs.data2sd in etc folder.
The question is why internal memory is already full with 10 apps:|.
How can i check what is working and what no...i want to install more apps in my phone
Need help fast...i need to go in a trip.

ghiurtuv said:
Hi all.I managed to partition my sd card (4gb) via cwm recovery.After partitionating i wipe cache partitions and data.
After that my phone boot normaly and i create fs.data2sd in etc folder.
The question is why internal memory is already full with 10 apps:|.
How can i check what is working and what no...i want to install more apps in my phone
Need help fast...i need to go in a trip.
Click to expand...
Click to collapse
fs.data2sd should be in /sdcard/Android/data/fugumod for fugumod kernel
or
fs.data2sd should be in /sdcard/Android/data/g3mod for g3mod kernel

I try this now i am on your ulti 1.4
Sent from my GT-I5800 using XDA App

I've done what you said but now my phone don't boot with sd inside...and after insert sd i have again low internal memory problem...pls help me
Sent from my GT-I5800 using XDA App

Can someone help me pls?i am disperated...
Edit:i downloaded from market link2sd but it tell me my partition is not mounted...anyone help me?please...
Sent from my GT-I5800 using XDA App

Nobody can help here?
Sent from my GT-I5800 using XDA App

ghiurtuv said:
Nobody can help here?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
hi
i recently got a 16GB partitioned the same using CWM 1GB ext4 swap0 and have been using various roms with apps2sd everything seems to work fine
so do this
1. Format ur SD Using ur phone (take a backup of ur sd before doing this)
2. use CWM and do the partition again then flash the rom again and it should work
im right now using kilros 7.0 and everything is fine & i have 150MB free on my SD all app are getting installed on the SD only so may be u can try this rom
after doing the Ext4
hope it helps

K i will try to reinstall rom after partitioning again...i will let you me response tomorow...
Nice from you to help a noob like me...appreciate
Edit:that's all? I dont need any fs.data2sd file or something like this?
Sent from my GT-I5800 using XDA App

i do like you but now when i installed kyrillos v7 my phone is freeze at boot logo with some sounds....idk why...i flashed 2 times right now and nothing...i need fast help my phone is dead
edit:i forgot ti wipe date/factory reset...now my phone booting...i wait to see if data2sd work

I DONE.omg i really done thanks for your help haree...the problem was i think in reinstalling rom after partitioning...Thanks alot finaly i managed a2sd to work .

just flashed kyrillos 7 2 days back and partitioned via cwm for the first time.. wiped data.. restored titanium location to internal.. but can get it whether all is doing ok or not..
this is what i am getting:
system rom 219mb .. 33.2 free
internal 201 mb .. 145mb free
sd card 3.31gb .. 2.4 gb
sd card (a2sd) 479mb .. 355 mb
is this fine ??? hv installed quite a few apps .. plz chk n tell whether i did ok or not???

Yes is good congratulation i think you put 512 ext

ghiurtuv said:
Yes is good congratulation i think you put 512 ext
Click to expand...
Click to collapse
yes 512mb it is .. and thankssss a lot for ur reply ..

Np i am glad to can help someone else !

[Help]how 2 format sd ext tru mobile

as i was changng vit roms d data/apps of earlier roms in sdext r mixing up vit new roms apps in sdext.(i was thiking),cos wen im trying to instal an app it is asking "the old data vil b replacing" kinda msg wch mean dat d app was already instaled.but i cudnt see dat app anywhere.
dats y i thoght to format sdext n instal freshly al apps.
i want to format sdext using mobile only cos i dnt hav pc
help pls.
press thanx if i help u

You can do it easily if you install a kernel with included CWM (Savies Kernel Rev 73)
You can find an option Format ext or sd-ext or 2nd partition there, it only works with CWM included kernels, sd-ext doesnt seem to mount with madteam/skin (the one thats flashable CWM)

bro any link??? tutorial about creating EXT using phone only!!

leviz06 said:
bro any link??? tutorial about creating EXT using phone only!!
Click to expand...
Click to collapse
You got CWM for that, if you are asking about creating, you dont need an inbuilt one, just flash cwm by madteam(or skin) via stock recovery, go to advanced-> partition sd card-> Give sizes -> Wait till its complete -> Partition done
For formatting ONLY sd-ext or for formatting sd-ext without losing sd card contents you need an inbuilt CWM..it can be done also with terminal emulator, but Im not sure about that..

hitme987 said:
You got CWM for that, if you are asking about creating, you dont need an inbuilt one, just flash cwm by madteam(or skin) via stock recovery, go to advanced-> partition sd card-> Give sizes -> Wait till its complete -> Partition done
For formatting ONLY sd-ext or for formatting sd-ext without losing sd card contents you need an inbuilt CWM..it can be done also with terminal emulator, but Im not sure about that..
Click to expand...
Click to collapse
thnks for detail.n wat do u mean by inbuilt cwm?
u meann cwm dat cums directly wit d kernel.wel if so den only merruk kernel cums up vit cwm i think so.isnt it?
Sent from my GT-S5360 using xda premium

harigavara said:
thnks for detail.n wat do u mean by inbuilt cwm?
u meann cwm dat cums directly wit d kernel.wel if so den only merruk kernel cums up vit cwm i think so.isnt it?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Yes, Along with Merruk, Savies Kernel Rev 73 got that one, its the best imo in performance..

[Q] Using Link2sd in jellyblast

hey someone please tell me how can i use link2sd in JELLBLAST V3.0.1
IT shows that the sd-ext can't be mounted.
Please solve this problem
I have attached the image.

1) Try setting the mount script partition to ext2/ext3/ext4 and see if anyone of them makes the mount successful (it doesnt matter with which partition it mounts with)
2) Did you partition your sd card correctly? Mention more about how you did it..

anmolsharma1293 said:
hey someone please tell me how can i use link2sd in JELLBLAST V3.0.1
IT shows that the sd-ext can't be mounted.
Please solve this problem
I have attached the image.
Click to expand...
Click to collapse
I used Minitool partition wizard home edition to partition my sd card. set the partition as fat32...didnt really like the idea and after trying a new rom, and going back to jellyblast v3.01, i removed several apps(link2sd included) by uninstalling them through titanium backup, and then used install manager v3.5.1 to move my apps to my unpartitioned sd card

I partioned my sd card using minitool...
Kuro kernel supports link2sd or i shud reformat my sd card....???
Sent from my GT-S5360 using xda app-developers app

I partioned it using minitool....
I made the sd-ext part in ext3 format....
Should i reformat the sdcard and than partion it again via cm...???
Sent from my GT-S5360 using xda app-developers app

kuro kernel supports link2sd,my expirience first partition as fat32,second as ext2-3 using minitool,no problem,no need for reformat or something in cwm.

Jelly blast has kuro kernel, it supports Link2sd, dont use mini tool, it complicates things, make it the easy way, go to CWM -> Advanced-> Partition SD card -> Give 2nd partition space-> swap as 0 and then wait till it get partitioned, now try mounting ext3 in link2sd, it must work

Thank u sir....i will try it
Sent from my GT-S5360 using xda app-developers app

Sir one more question.....
can i flash another kernel in jellyblast v3.0.1 and replace kurokernel...???

anmolsharma1293 said:
Sir one more question.....
can i flash another kernel in jellyblast v3.0.1 and replace kurokernel...???
Click to expand...
Click to collapse
Yes, my suggestion would be savies kernel rev 73, the best one out yet imo

anmolsharma1293 said:
Thank u sir....i will try it
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
bt bro before partitioning tru cwm mak backup of entire sdcard data cos partioning tru cwm formats entire sd.
Sent from my GT-S5360 using xda premium

hitme987 said:
Jelly blast has kuro kernel, it supports Link2sd, dont use mini tool, it complicates things, make it the easy way, go to CWM -> Advanced-> Partition SD card -> Give 2nd partition space-> swap as 0 and then wait till it get partitioned, now try mounting ext3 in link2sd, it must work
Click to expand...
Click to collapse
this method wiped my sd card...make a backup before you partition it this way.

Thank everyone here.....i partioned my sd card successfully and now link2sd is working.....
Sent from my GT-S5360 using xda app-developers app

Sir i tried to install it....but it is so much confusing....the instrustions given on savie's thread are insufficient....
Please tell me how can i install savie rev 73 kernel...
Thaanxx in advance...
Sent from my GT-S5360 using xda app-developers app

It's actually easy to install.
First install the basic version. The (60 I think)
Then combine the last two kernel rar files.
Then flash.
Tapatalked using my galaxy y

anmolsharma1293 said:
Sir i tried to install it....but it is so much confusing....the instrustions given on savie's thread are insufficient....
Please tell me how can i install savie rev 73 kernel...
Thaanxx in advance...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
The post is actually not aligned properly which makes people confuse.
Just download savies kernel rev 73 modded by Ronnie (just look for the same title which is a download able link).
Copy it and Cwm by mad team or skin to sd card, go to recovery mode, first flash Cwm zip, and then flash the kernel zip, it shows a aroma installer, click default installation there, restart and done, check if you got 4 io s and 18 governors, if not flash again, this time choose custom installation and select all things, reboot and it will stick
kishorsidu said:
It's actually easy to install.
First install the basic version. The (60 I think)
Then combine the last two kernel rar files.
Then flash.
Tapatalked using my galaxy y
Click to expand...
Click to collapse
That's a completely incorrect method to install that kernel since it got an aroma installer
Sent from my GT-S5360 using xda premium

thank u sir....!!!
i will install savie kernel...

All the governers are not showing in savie's kernel:what:....i used custom installation also...
Sent from my GT-S5360 using xda app-developers app

anmolsharma1293 said:
All the governers are not showing in savie's kernel:what:....i used custom installation also...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Did you select all the governers in custom installation?
Wait, after flashing savies kernel, you get a permanent CWM, in which you need to click mount/system in mounts and storage option EVERYTIME you flash a zip, either it be a ROM/Kernel/Anything, ALWAYS mount/system when using savies kernel CWM

hitme987 said:
Did you select all the governers in custom installation?
Wait, after flashing savies kernel, you get a permanent CWM, in which you need to click mount/system in mounts and storage option EVERYTIME you flash a zip, either it be a ROM/Kernel/Anything, ALWAYS mount/system when using savies kernel CWM
Click to expand...
Click to collapse
sir after mounting system also it is not coming.....
i have installed it correctly......followed all the steps.....
also instaaled baecm tweaks.....
i think i have to revert back 2 stock kernel and then i have 2 again install the kernel...

[SOLVEDL]Y not booting with kuro kernel

Heyyyy buddies
I was using ussrv5+kuro kernel 1+ akurodata2sd
Today I thought of uninstalling games and apps cause of 12th board, cet, aieee...
After uninstalling 32 apps...
I open cf3d and uninstalled it my phone rebooted with lots of force closes then it stuck on splash screen
I restored my latest backup
Same fate
Went to internet cafe downloaded DDLF2 odin pack (thanks to sir docky73)
Flashed it and phone booted..
After that restored my backup and wow it booted...
Bt kernel was stock one
My all apps were gone...
So I flashed kuro kernel and again it stucked at splash screen
So I flashed stock kernel
Now all my apps are gone..
They were in 2nd partition
So which kernel should I flash????
And worst thing
I heard a conversation in my cell
Stock Kernel to battery: Babes I am gonna eat you
Battery:noooooooo!!!!! Somebody plzzz save me
Sent from my GT-S5360 using xda premium

Use savies rev 73, the easiest to install and user-friendly kernel yet with very good performance imo..I had problems booting with kuro kernel for some ROMs (having custom kernels), but with savies kernel never had a problem
Merruk Dev 7 would be the best performing kernel out there, but a bit tricky to get it installed..

thats's akuro failure. the phone didn't boot because the data inside ext partition is different with the one used by system. you must delete /data folder inside your sdcard partition to boot up. after that you can copy /data/data into /system/sd/data as usual. if you don't know how to delete /data folder inside your sdcard, the easiest way is reformat your partition.

kurotsugi said:
thats's akuro failure. the phone didn't boot because the data inside ext partition is different with the one used by system. you must delete /data folder inside your sdcard partition to boot up. after that you can copy /data/data into /system/sd/data as usual. if you don't know how to delete /data folder inside your sdcard, the easiest way is reformat your partition.
Click to expand...
Click to collapse
What if I delete akuro script from init.d and make a complete wipe of 2nd partition...
Or
Which partition I should delete???
/sdcard/data or /data/data
P.s. I never moved my /data/data to /system/sd/data
Sent from my GT-S5360 using xda premium

for safety reason you can delete (or copy into somwhere else) all files in your init.d folder and wipe 2nd partition. after that you can move your tweaks into init.d again. this step might a lil bit inconvenient but in this way we could boot up the system succesfully and easily diagnose the problem source.

kurotsugi said:
for safety reason you can delete (or copy into somwhere else) all files in your init.d folder and wipe 2nd partition. after that you can move your tweaks into init.d again. this step might a lil bit inconvenient but in this way we could boot up the system succesfully and easily diagnose the problem source.
Click to expand...
Click to collapse
Going to try it
Edit: it booted yeppie yesss..
Two things sir kuro
1 thanx a lot
2 plzzz give me your brain
Sent from my GT-S5360 using xda premium

Problem2: how to get apps back
Erasing /data/data will work
Sent from my GT-S5360 using xda premium

if you have TBU you can use it to recover your backuped apps

I want to use my second partition so I think I shuld delete useless data in /data/data/
Sent from my GT-S5360 using xda premium

umm...you better don't touch any of them. you can copy /data/data to /system/sd/ to activate dt2sd function and prevent system to write your original /data partition but you'd better don't delete/modify them

kurotsugi said:
umm...you better don't touch any of them. you can copy /data/data to /system/sd/ to activate dt2sd function and prevent system to write your original /data partition but you'd better don't delete/modify them
Click to expand...
Click to collapse
I will try titanium backup to recover apps....
Thanks
Sent from my GT-S5360 using xda premium

Terminal command to wipe 2nd partition plzzz
Sent from my GT-S5360 using xda premium

Code:
su
mount -t extX -o nosuid,nodev /dev/block/mmcblk0p2 /system/sd
note:
1. extX - replace X with your type partition
2. its mmcblk[zero]p[two]
after executing these command you can go to /system/sd then delete all files there. if you don't have any app backup you can move the /app content to your sdcard. in this way you can reinstall all your app later.