as i was changng vit roms d data/apps of earlier roms in sdext r mixing up vit new roms apps in sdext.(i was thiking),cos wen im trying to instal an app it is asking "the old data vil b replacing" kinda msg wch mean dat d app was already instaled.but i cudnt see dat app anywhere.
dats y i thoght to format sdext n instal freshly al apps.
i want to format sdext using mobile only cos i dnt hav pc
help pls.
press thanx if i help u
You can do it easily if you install a kernel with included CWM (Savies Kernel Rev 73)
You can find an option Format ext or sd-ext or 2nd partition there, it only works with CWM included kernels, sd-ext doesnt seem to mount with madteam/skin (the one thats flashable CWM)
bro any link??? tutorial about creating EXT using phone only!!
leviz06 said:
bro any link??? tutorial about creating EXT using phone only!!
Click to expand...
Click to collapse
You got CWM for that, if you are asking about creating, you dont need an inbuilt one, just flash cwm by madteam(or skin) via stock recovery, go to advanced-> partition sd card-> Give sizes -> Wait till its complete -> Partition done
For formatting ONLY sd-ext or for formatting sd-ext without losing sd card contents you need an inbuilt CWM..it can be done also with terminal emulator, but Im not sure about that..
hitme987 said:
You got CWM for that, if you are asking about creating, you dont need an inbuilt one, just flash cwm by madteam(or skin) via stock recovery, go to advanced-> partition sd card-> Give sizes -> Wait till its complete -> Partition done
For formatting ONLY sd-ext or for formatting sd-ext without losing sd card contents you need an inbuilt CWM..it can be done also with terminal emulator, but Im not sure about that..
Click to expand...
Click to collapse
thnks for detail.n wat do u mean by inbuilt cwm?
u meann cwm dat cums directly wit d kernel.wel if so den only merruk kernel cums up vit cwm i think so.isnt it?
Sent from my GT-S5360 using xda premium
harigavara said:
thnks for detail.n wat do u mean by inbuilt cwm?
u meann cwm dat cums directly wit d kernel.wel if so den only merruk kernel cums up vit cwm i think so.isnt it?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Yes, Along with Merruk, Savies Kernel Rev 73 got that one, its the best imo in performance..
Related
Hi all.I managed to partition my sd card (4gb) via cwm recovery.After partitionating i wipe cache partitions and data.
After that my phone boot normaly and i create fs.data2sd in etc folder.
The question is why internal memory is already full with 10 apps:|.
How can i check what is working and what no...i want to install more apps in my phone
Need help fast...i need to go in a trip.
ghiurtuv said:
Hi all.I managed to partition my sd card (4gb) via cwm recovery.After partitionating i wipe cache partitions and data.
After that my phone boot normaly and i create fs.data2sd in etc folder.
The question is why internal memory is already full with 10 apps:|.
How can i check what is working and what no...i want to install more apps in my phone
Need help fast...i need to go in a trip.
Click to expand...
Click to collapse
fs.data2sd should be in /sdcard/Android/data/fugumod for fugumod kernel
or
fs.data2sd should be in /sdcard/Android/data/g3mod for g3mod kernel
I try this now i am on your ulti 1.4
Sent from my GT-I5800 using XDA App
I've done what you said but now my phone don't boot with sd inside...and after insert sd i have again low internal memory problem...pls help me
Sent from my GT-I5800 using XDA App
Can someone help me pls?i am disperated...
Edit:i downloaded from market link2sd but it tell me my partition is not mounted...anyone help me?please...
Sent from my GT-I5800 using XDA App
Nobody can help here?
Sent from my GT-I5800 using XDA App
ghiurtuv said:
Nobody can help here?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
hi
i recently got a 16GB partitioned the same using CWM 1GB ext4 swap0 and have been using various roms with apps2sd everything seems to work fine
so do this
1. Format ur SD Using ur phone (take a backup of ur sd before doing this)
2. use CWM and do the partition again then flash the rom again and it should work
im right now using kilros 7.0 and everything is fine & i have 150MB free on my SD all app are getting installed on the SD only so may be u can try this rom
after doing the Ext4
hope it helps
K i will try to reinstall rom after partitioning again...i will let you me response tomorow...
Nice from you to help a noob like me...appreciate
Edit:that's all? I dont need any fs.data2sd file or something like this?
Sent from my GT-I5800 using XDA App
i do like you but now when i installed kyrillos v7 my phone is freeze at boot logo with some sounds....idk why...i flashed 2 times right now and nothing...i need fast help my phone is dead
edit:i forgot ti wipe date/factory reset...now my phone booting...i wait to see if data2sd work
I DONE.omg i really done thanks for your help haree...the problem was i think in reinstalling rom after partitioning...Thanks alot finaly i managed a2sd to work .
just flashed kyrillos 7 2 days back and partitioned via cwm for the first time.. wiped data.. restored titanium location to internal.. but can get it whether all is doing ok or not..
this is what i am getting:
system rom 219mb .. 33.2 free
internal 201 mb .. 145mb free
sd card 3.31gb .. 2.4 gb
sd card (a2sd) 479mb .. 355 mb
is this fine ??? hv installed quite a few apps .. plz chk n tell whether i did ok or not???
Yes is good congratulation i think you put 512 ext
ghiurtuv said:
Yes is good congratulation i think you put 512 ext
Click to expand...
Click to collapse
yes 512mb it is .. and thankssss a lot for ur reply ..
Np i am glad to can help someone else !
hey someone please tell me how can i use link2sd in JELLBLAST V3.0.1
IT shows that the sd-ext can't be mounted.
Please solve this problem
I have attached the image.
1) Try setting the mount script partition to ext2/ext3/ext4 and see if anyone of them makes the mount successful (it doesnt matter with which partition it mounts with)
2) Did you partition your sd card correctly? Mention more about how you did it..
anmolsharma1293 said:
hey someone please tell me how can i use link2sd in JELLBLAST V3.0.1
IT shows that the sd-ext can't be mounted.
Please solve this problem
I have attached the image.
Click to expand...
Click to collapse
I used Minitool partition wizard home edition to partition my sd card. set the partition as fat32...didnt really like the idea and after trying a new rom, and going back to jellyblast v3.01, i removed several apps(link2sd included) by uninstalling them through titanium backup, and then used install manager v3.5.1 to move my apps to my unpartitioned sd card
I partioned my sd card using minitool...
Kuro kernel supports link2sd or i shud reformat my sd card....???
Sent from my GT-S5360 using xda app-developers app
I partioned it using minitool....
I made the sd-ext part in ext3 format....
Should i reformat the sdcard and than partion it again via cm...???
Sent from my GT-S5360 using xda app-developers app
kuro kernel supports link2sd,my expirience first partition as fat32,second as ext2-3 using minitool,no problem,no need for reformat or something in cwm.
Jelly blast has kuro kernel, it supports Link2sd, dont use mini tool, it complicates things, make it the easy way, go to CWM -> Advanced-> Partition SD card -> Give 2nd partition space-> swap as 0 and then wait till it get partitioned, now try mounting ext3 in link2sd, it must work
Thank u sir....i will try it
Sent from my GT-S5360 using xda app-developers app
Sir one more question.....
can i flash another kernel in jellyblast v3.0.1 and replace kurokernel...???
anmolsharma1293 said:
Sir one more question.....
can i flash another kernel in jellyblast v3.0.1 and replace kurokernel...???
Click to expand...
Click to collapse
Yes, my suggestion would be savies kernel rev 73, the best one out yet imo
anmolsharma1293 said:
Thank u sir....i will try it
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
bt bro before partitioning tru cwm mak backup of entire sdcard data cos partioning tru cwm formats entire sd.
Sent from my GT-S5360 using xda premium
hitme987 said:
Jelly blast has kuro kernel, it supports Link2sd, dont use mini tool, it complicates things, make it the easy way, go to CWM -> Advanced-> Partition SD card -> Give 2nd partition space-> swap as 0 and then wait till it get partitioned, now try mounting ext3 in link2sd, it must work
Click to expand...
Click to collapse
this method wiped my sd card...make a backup before you partition it this way.
Thank everyone here.....i partioned my sd card successfully and now link2sd is working.....
Sent from my GT-S5360 using xda app-developers app
Sir i tried to install it....but it is so much confusing....the instrustions given on savie's thread are insufficient....
Please tell me how can i install savie rev 73 kernel...
Thaanxx in advance...
Sent from my GT-S5360 using xda app-developers app
It's actually easy to install.
First install the basic version. The (60 I think)
Then combine the last two kernel rar files.
Then flash.
Tapatalked using my galaxy y
anmolsharma1293 said:
Sir i tried to install it....but it is so much confusing....the instrustions given on savie's thread are insufficient....
Please tell me how can i install savie rev 73 kernel...
Thaanxx in advance...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
The post is actually not aligned properly which makes people confuse.
Just download savies kernel rev 73 modded by Ronnie (just look for the same title which is a download able link).
Copy it and Cwm by mad team or skin to sd card, go to recovery mode, first flash Cwm zip, and then flash the kernel zip, it shows a aroma installer, click default installation there, restart and done, check if you got 4 io s and 18 governors, if not flash again, this time choose custom installation and select all things, reboot and it will stick
kishorsidu said:
It's actually easy to install.
First install the basic version. The (60 I think)
Then combine the last two kernel rar files.
Then flash.
Tapatalked using my galaxy y
Click to expand...
Click to collapse
That's a completely incorrect method to install that kernel since it got an aroma installer
Sent from my GT-S5360 using xda premium
thank u sir....!!!
i will install savie kernel...
All the governers are not showing in savie's kernel:what:....i used custom installation also...
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
All the governers are not showing in savie's kernel:what:....i used custom installation also...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Did you select all the governers in custom installation?
Wait, after flashing savies kernel, you get a permanent CWM, in which you need to click mount/system in mounts and storage option EVERYTIME you flash a zip, either it be a ROM/Kernel/Anything, ALWAYS mount/system when using savies kernel CWM
hitme987 said:
Did you select all the governers in custom installation?
Wait, after flashing savies kernel, you get a permanent CWM, in which you need to click mount/system in mounts and storage option EVERYTIME you flash a zip, either it be a ROM/Kernel/Anything, ALWAYS mount/system when using savies kernel CWM
Click to expand...
Click to collapse
sir after mounting system also it is not coming.....
i have installed it correctly......followed all the steps.....
also instaaled baecm tweaks.....
i think i have to revert back 2 stock kernel and then i have 2 again install the kernel...
Hi im on cod rom usin merruk kernel and trying to partition my sd card using the built in cwm. Usually if i use the partition sd card on temporary cwm it takes a while to complete but in the built in cwm in merruk kernel it is fast and does not partition my sd card at all. Btw im using mt kernel dev edition 7
Sent from my gY CoD rom by D.J. and merruk dev edition 7+ext4
mount storage before partition.
there is a alternate using mini tool partition
shivang005 said:
there is a alternate using mini tool partition
Click to expand...
Click to collapse
landlord28 said:
Hi im on cod rom usin merruk kernel and trying to partition my sd card using the built in cwm. Usually if i use the partition sd card on temporary cwm it takes a while to complete but in the built in cwm in merruk kernel it is fast and does not partition my sd card at all. Btw im using mt kernel dev edition 7
Sent from my gY CoD rom by D.J. and merruk dev edition 7+ext4
Click to expand...
Click to collapse
MOUNT sdcard before partioning ur sdcard....
and prefer cwm over minitool to partion ur sd card.....
anmolsharma1293 said:
MOUNT sdcard before partioning ur sdcard....
and prefer cwm over minitool to partion ur sd card.....
Click to expand...
Click to collapse
minitool can partition without losing data. i used cwm to partition and my sd card was wiped clean
Thanks for reply guys it worxnow )
Sent from my GT-S5360 using xda premium
xfactor_ro said:
minitool can partition without losing data. i used cwm to partition and my sd card was wiped clean
Click to expand...
Click to collapse
Minitool creates problem sumtimes....thats why i prefer cwm.....
Sent from my GT-S5360 using xda app-developers app
landlord28 said:
Hi im on cod rom usin merruk kernel and trying to partition my sd card using the built in cwm. Usually if i use the partition sd card on temporary cwm it takes a while to complete but in the built in cwm in merruk kernel it is fast and does not partition my sd card at all. Btw im using mt kernel dev edition 7
Sent from my gY CoD rom by D.J. and merruk dev edition 7+ext4
Click to expand...
Click to collapse
I'm also facing same problem
=========================================
Galaxy Y users Click here for 1.2Ghz and 1Gb internel
Hi,
I am new to XDA and first time posting a question !!
My question is when i was trying to increase my phones internal memory via CWM and link2sd by following the instructions very carefully, I am getting an error which says "LINK2SD could not obtain root access" and some time it gets root access somehow it shows "mount script error" .
I want 512mb increased memory.
ALREADY TRIED:
1-Rebooting
2-Hot booting
3-Formatting SD card
4-using different CWM
5-Trying different EXT2,3,4 & Fat also
I am using Galaxy Y GT-s5360 with Nemesis One Phoenix ROM with Hells Fusion#50 kernel.
Link2sd Updated via google play
Superuser Pro (updated) !!
Aki_GT-S5360 said:
Hi,
I am new to XDA and first time posting a question !!
My question is when i was trying to increase my phones internal memory via CWM and link2sd by following the instructions very carefully, I am getting an error which says "LINK2SD could not obtain root access" and some time it gets root access somehow it shows "mount script error" .
I want 512mb increased memory.
ALREADY TRIED:
1-Rebooting
2-Hot booting
3-Formatting SD card
4-using different CWM
5-Trying different EXT2,3,4 & Fat also
I am using Galaxy Y GT-s5360 with Nemesis One Phoenix ROM with Hells Fusion#50 kernel.
Link2sd Updated via google play
Superuser Pro (updated) !!
Click to expand...
Click to collapse
Believe me tried a million times....the problem is your ROM(which is by the banned in xda)
The ROM is 100% the problem
All other roms support link2sd :laugh:
[R] Thanks for replying but link2sd works fine
Ze3rL said:
Believe me tried a million times....the problem is your ROM(which is by the banned in xda)
The ROM is 100% the problem
All other roms support link2sd :laugh:
Click to expand...
Click to collapse
Hey, thanks for replying but link2sd works fine on my ROM the only problem is the partitioning part of it !!
is there any other way to increase my internal memory or can you suggest me any other ROM which is very similar to Nemesis one !!
Thanks
Aki_GT-S5360 said:
Hey, thanks for replying but link2sd works fine on my ROM the only problem is the partitioning part of it !!
is there any other way to increase my internal memory or can you suggest me any other ROM which is very similar to Nemesis one !!
Thanks
Click to expand...
Click to collapse
try a2sd or data2sd
[Q] How to do it
Ze3rL said:
try a2sd or data2sd
Click to expand...
Click to collapse
can u please tell me how to do it with a2sd or data2sd !!
thanks
Aki_GT-S5360 said:
can u please tell me how to do it with a2sd or data2sd !!
thanks
Click to expand...
Click to collapse
A2SD: http://forum.xda-developers.com/showthread.php?t=1651393
Data2SD: http://forum.xda-developers.com/showthread.php?t=1766856
Dude just follw steps..
Go to cwm recovery..
Mount everything
Wipe everything except system(if u make some changes in system then wipe it also and again flash it)
Then go to advanced and then partition sd card..make swap size 0M
Then reboot and u will have no problem....
If their is no problem u can press thanks....
Sent from my GT-S5360
Aki_GT-S5360 said:
Hi,
I am new to XDA and first time posting a question !!
My question is when i was trying to increase my phones internal memory via CWM and link2sd by following the instructions very carefully, I am getting an error which says "LINK2SD could not obtain root access" and some time it gets root access somehow it shows "mount script error" .
I want 512mb increased memory.
ALREADY TRIED:
1-Rebooting
2-Hot booting
3-Formatting SD card
4-using different CWM
5-Trying different EXT2,3,4 & Fat also
I am using Galaxy Y GT-s5360 with Nemesis One Phoenix ROM with Hells Fusion#50 kernel.
Link2sd Updated via google play
Superuser Pro (updated) !!
Click to expand...
Click to collapse
Maybe it's a ROM problem. Try Creed v3.5 with ICS Theme. Much better than the ROM you are using
Press THANKS if I HELPED YOU
[R] Already done !
LetJect said:
Dude just follw steps..
Go to cwm recovery..
Mount everything
Wipe everything except system(if u make some changes in system then wipe it also and again flash it)
Then go to advanced and then partition sd card..make swap size 0M
Then reboot and u will have no problem....
If their is no problem u can press thanks....
Sent from my GT-S5360
Click to expand...
Click to collapse
I hav completed CWM steps already but when the link2sd part starts all the errors come back !!
"cannot find root" & "can't mount" !!
Aki_GT-S5360 said:
I hav completed CWM steps already but when the link2sd part starts all the errors come back !!
"cannot find root" & "can't mount" !!
Click to expand...
Click to collapse
Then update rom from nemesis one to nemesis two(titanium)....
Sent from my GT-S5360
Aki_GT-S5360 said:
Hi,
I am new to XDA and first time posting a question !!
My question is when i was trying to increase my phones internal memory via CWM and link2sd by following the instructions very carefully, I am getting an error which says "LINK2SD could not obtain root access" and some time it gets root access somehow it shows "mount script error" .
I want 512mb increased memory.
ALREADY TRIED:
1-Rebooting
2-Hot booting
3-Formatting SD card
4-using different CWM
5-Trying different EXT2,3,4 & Fat also
I am using Galaxy Y GT-s5360 with Nemesis One Phoenix ROM with Hells Fusion#50 kernel.
Link2sd Updated via google play
Superuser Pro (updated) !!
Click to expand...
Click to collapse
Ze3rL is right there is problem with ur rom
ok im here again. im totally confused on what to to do here.i successfully installed merruk 2.5 deluxe in jBv3 3.5 . on my past kernels without a permanent CWM , i already did partitioning an sd card. but now, i cant. u see i used skin-1980-GT-S5360+CMW in the past and i tried using this in merruk. but it will replace the stock CWM and i dont know if its good or bad but i aborted it by restarting it. please tell me what to do.. do i have to use only skin.zip or is there a skin.zip for permanent CWM like in merruk ? :fingers-crossed:
einstable said:
ok im here again. Im totally confused on what to to do here.i successfully installed merruk 2.5 deluxe in jbv3 3.5 . On my past kernels without a permanent cwm , i already did partitioning an sd card. But now, i cant. U see i used skin-1980-gt-s5360+cmw in the past and i tried using this in merruk. But it will replace the stock cwm and i dont know if its good or bad but i aborted it by restarting it. Please tell me what to do.. Do i have to use only skin.zip or is there a skin.zip for permanent cwm like in merruk ? :fingers-crossed:
Click to expand...
Click to collapse
according to me it will not replace stock recovery until u choose the option of applu update.zip which is found in temp cwm
abhishekr700 said:
according to me it will not replace stock recovery until u choose the option of applu update.zip which is found in temp cwm
Click to expand...
Click to collapse
Thanks for that sir but can u explain to me how to use the ext4 ? what it does and how it work? all i know is ext3 for partitioning. i just want to increase my internal memory its been days now since im trying to partition my card in this awsome kernel.
EinStable said:
Thanks for that sir but can u explain to me how to use the ext4 ? what it does and how it work? all i know is ext3 for partitioning. i just want to increase my internal memory its been days now since im trying to partition my card in this awsome kernel.
Click to expand...
Click to collapse
The main benefits that ext 4 has over
ext3 are :
* faster timestamping
* faster file system checking
* journaling checksums
* extents (basically automatic space
allocation to avoid fragmentation)
using ext4is same as ext3 in cwm select ext4 and select ext 4 in app 2sd