When trying to tether to my phone, Nexi won't find the network ID. I can connect my Nexi to my home network with no issues, and I can connect my PC to my phone's AP with no problems so I have to assume the issue is some kind of incompatibility between these two devices.
Are there any know incompatibility for the N7 wifi? It's listed as a b,g,n device, so I have no idea what would be preventing it from seeing my phone. Any thoughts?
Your phone might be broadcasting an "ad hoc" wifi connection.
Related
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
MoridinBG said:
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
Click to expand...
Click to collapse
I believe that it CAN detect ad-hoc networks.
I setup an ad-hoc connection from my pc, and it detected it, but there was no network activity. I probably did something wrong, but, I am not sure why it didn't work.
MoridinBG said:
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
Click to expand...
Click to collapse
I use USB Wi-fi adapter for wireless connection and I need to say that G1 don't allow to use adhoc connection, it need only wifi router.
Some month before I see the answer from T-Mobile support that G1 can't use adhoc connection.
It's sad, bcoz my last WM phone (Tytn) has no problems with adhoc connection...
Alas I feel your pain. I use adhoc for my iPhone frequently because at school I can only jack into an ethernet because the WiFi is protected. But my G1 can't so I am doomed to EDGE when i'm in my mom's classroom after school
MoridinBG said:
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
Click to expand...
Click to collapse
is this a software issue that can be fixed or is it a hardware issue?
Software. In fact the phone can MAKE ad-hoc networks that other devices and computers can see and join. That's how WiFi tethering works. You can start a wifi tethering app and use the ad hoc connection it creates, without using the cellular tethering at all, or you can examine the tethering scripts and extract just the part concerning the wifi.
I experimented a bit, and was able to change almost everything needed to share Internet from the PC to the phone, except default gateway on the phone...
Noone wants to help
I guess everyone who has an unlimited data plan thinks "Haha stupid stone age idiots want adhoc HAHAHA" . Damn it. I live in a stupid country and I don't have an unlimited data plan. I want to connect to my laptop's wi fi. Please anyone help!!!
Here's the solution
http://hydtech.wordpress.com/2009/09/14/how-to-connect-to-ad-hoc-networks-using-tmobile-g1-android/
The important part is to tweak the windows part - you need to tell the broadband/adsl internet connection to share itself to the Private wireless network (the network manging your Wireless adapter). If you are having trouble with the windows part (say you connect and have full bars on the phone but no access to web) google ICS (internet connection sharing) in windows and you should get it working.
Hello,
I am having the following issue while using Wi-Fi: in the list of available networks is a type of connection I have not seen before. It seems to be a modification of sorts of my own wi-fi connection, but if the device connects to it, I cannot connect to either websites or to the other PCs on the LAN.
This connection is represented by a different type of icon as you can see on the screenshots. I have not created it, but it may be a remnant from my previous connection - look at the names, one has a space in between, the other hasn't. I created the new one (without the space) after I changed my router to D-Link's DIR-600.
An interesting thing about this connection is that the device does connect to it even when not anywhere within range of the router (say 2-3 km.)
Any ideas?
This the symbol for an Ad-Hoc network (Computer to Computer). You can probably remove that connection and still be o.k.
Thanks!
I tried removing it, but it then creates it again.
Of course, I can always disconnect and connect to the other network.
I have never dealt with Ad-Hoc connections. Isn't this connection supposed to enable access to the other computer then? Like LAN? And why does the device connect to this network when far outside the router's broadcast signal?
Before and after the recent TMOUS ROM upgrade, I have always been unable to access the internet with the wifi hotspot created by my iPhone as the wifi router, while my laptop and ipod touch could. Are there any special settings I have to do on HD2? Any suggestions? Thanks.
Now I could not even access internet via my hone wifi router - it used to be able to right after the ROM upgrade last hight...
Have you checked your wifi settings, you may have to re-configure your HD2 to your network.
I have updated my ROM to 2.13 but didn't encounter this issue.
Yes I did check the wireless controls (comm manager) for connections many times and showed clearly it was connected to my home wifi router network; but it just could not access internet ("Error! Connection closed by remote server"). I must have missed something in configuring wifi settings properly... Would you be kind enough to show how/what to re-config the wifi settings to access internet? My other mobile devices could access internet via the same home wifi router without having to re-config anything...
I figured out the problem
I noticed that the wifi IP address for my HD2 was completely different from those of my other mobile devices on the same home wifi router, so it dawned to me that I might have inadvertently put it on a different wifi network. I decided to re-flash the new TMOUS ROM (2.13) upgrade, and go through the wifi setup again more carefully. It turned out that last time when the setup asked me if I would use "TLS" wireless network for authentication, I tapped the "wireless network" button - although I should have ignored it and tapped the "next" button instead, which I did this time. Now I could access internet via my home wifi router, as well as via the wifi hotspot created by my other mobile device. So the problem is considered SOLVED.
Hope this post is helpful for those who might be experiencing similar problem as I have been.
or maybe your phone felt insulted you were trying to connect it to the internet via an inferior children's phone (iPh#$% - sorry no cursing allowed) and just said no. i bet if you tried using your PC (not M*C) as a hotspot, or a dlink (lol) you hd2 would connect perfectly.
ps: dlink is about the worst router out there
I have my Tattoo rooted with 1.6 (can't recall the ROM name) with build number 1.67.405.6. Almost everything works fine except the connection with my home WiFi network. It's a PPPoE connection through ADSL modem. Next in line is the Netgear WG602 v3 WiFi router. At the beginning I couldn't connect at all so I changed the router's ROM to DD-WRT. Now I can connect with the router but no connection to the internet whatsoever. I can ping my router through my Tattoo, I can even open the 192.168.1.1 and mess around with its software but no connection to the internet. It is only limited to my Tattoo as I can connect through my laptop, through my other mobile (HTC S710) and also I can connect my Tattoo with any other WiFi (Secured or Open) with no problems at all.
I tried with no Security, with WEP, with WPA-PSK to no avail. Any other clues?
try running htc mail while you are using your wifi throuf your tattoo it worked for me
What is supposed to happen if I do that? I'm trying it as soon as I get home btw.
Nothing happened
Hi all...sorry for my interference but this problem is similar to mine.
I'm going mad from many weeks trying connect my Huawei Ideos (U8150) to my home wlan through a netgear VG602v3 AP. No way to do this.
Wifi works from my laptop and from my girlfriend's laptop, but from ideos it doesn't.
I turned off all wireless device in my house, I tried with/without WPA, I tried open network from channel #1 to channel #13, tried changing ssid and I also tried praying .
There is a weak wifi near here: it is on channel #1 and its power is between -89 and -82db. My wifi power (data from kismet) is between -50 and -18 db and is configured on channel #11.
In any cases, even if I put my Ideos near to AP antenna the story is ever the same:
- Ideos indentify the wifi network
- Ideos acquire the IP
- I open the browser or the android market and...
- Ideos lose connection...and so on.
I downloaded from work wifi (crypted with WPA) a wifi scanner from app store: it shows me the neighbour's weak wifi and my wifi network which appear and disappear recurrently.
Please, someone helps me (without suggest to buy another AP!!), any suggestions are welcome!!
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
I checked every setting to no avail. I still think somehow that my problem is with my router or adsl modem which doesn't connect automatically with PPPoE and Android doesn't have any command or software to initiate a PPPoE connection.
Other than that... Can't find any solution. Until then, I use connectify on my Win7 laptop. The thing is that I have to keep my laptop switched on as long as I'm in the house.
alpick36 said:
Have you tried logging into the router and checking the privileges for devices. Some of them have a security element that restricts the use of the internet on newly connected devices until the setting is changed. I had a similar problem with a new laptop.
hope it helps.
Click to expand...
Click to collapse
thank you for suggestion. I looked in depth but I did not found the option of which you were talking about. The unique solution still remains change the AP!!!
WiFi and Netgear Router
I think I finally found the answer. It appears Netgear routers support something called WiFi Multimedia. Its a QOS methodology. I disabled WiFi MM or WIMM as its sometimes called, as well as Internet QOS and all my problems connecting to web pages, the market, etc. through WiFi disappeared.
Strange that older versions of the ROM supported WIMM (or ignored it) and newer ones don't. But that solved the problem for me with no real degradation of performance on any of my other computers.
Good luck.
I am traveling and am having trouble connecting to routers here in Botswana.
Most of the reading I have done regards people fixing their own router and broadcasting ssid.
I need to connect to public routers at hotels and restaurants. So far there are 2 places I can't connect to.
I am also with an iPhone and android tablet (2012 note) that connect no problem. This leads me to believe the problem is in the phone.
I have connected to 2 other places in Botswana successfully. So the antenna works.
I use wpa/wpa2 psk at home with no issues.
Airplane mode is on.
The router is visible. I put in the password. Connect lights up. Press connect.
The router says saved. Never connected.
Motorola xt907
Android 4.3.1
Cyanogenmod 10.2-20131104
Kernel 3.0.101-g02ddf4a
I don't have the option to re flash roms or anything as that would require a pc, I don't have access to.
I would like to use the phone make calls over Skype. For some reason others can't hear me well on the tablet and conversations are not discrete over the speaker.
Maybe there is a setting or some thing that can be changed in root explorer?
Hopefully others have dealt with this while traveling.
Thanks!!!