Hello,
I am having the following issue while using Wi-Fi: in the list of available networks is a type of connection I have not seen before. It seems to be a modification of sorts of my own wi-fi connection, but if the device connects to it, I cannot connect to either websites or to the other PCs on the LAN.
This connection is represented by a different type of icon as you can see on the screenshots. I have not created it, but it may be a remnant from my previous connection - look at the names, one has a space in between, the other hasn't. I created the new one (without the space) after I changed my router to D-Link's DIR-600.
An interesting thing about this connection is that the device does connect to it even when not anywhere within range of the router (say 2-3 km.)
Any ideas?
This the symbol for an Ad-Hoc network (Computer to Computer). You can probably remove that connection and still be o.k.
Thanks!
I tried removing it, but it then creates it again.
Of course, I can always disconnect and connect to the other network.
I have never dealt with Ad-Hoc connections. Isn't this connection supposed to enable access to the other computer then? Like LAN? And why does the device connect to this network when far outside the router's broadcast signal?
Related
I can connect to my wifi network just fine, however I am having problems connecting to the shared network (aka shared files and folders). Anyone have any ideas? I tried using GSFinder but kept having issues stating my connection was not correct.
I searched the forum and could not find anything.
Two things I can think of:
1) Your WiFi connection is configured for 'The internet' while in Settings->Connections->Connections->Advanced->Network Selection->Programs that connect to the network
you have something other than 'My ISP'. Those settings have to match.
2) Download PocketLAN. It will only run 10 days if you don't by it, but it's a great network utility for mobile devices. Shows you the network just like desktop windows and lets you run commands like ping etc.
Hi guys!
I'm trying to use (first time 4 me!) WiFi connection from my laptop and my Jamin in this way:
Start from scratch (without connections...) and turn on both wifi.
Create a new connection for only 2 devices from my Jamin without any security (4 the moment).
Now I can see the new wifi network on my laptop...
I chose connect from my laptop and the connections estabilish.
Handshake to retrieve the ip address is oaky and now I've got the connection from my 2 devices (Jamin and laptop).
On laptop I can ping the ip address of my Jamin but now I don't know what can I do with this connection.
Is it possible to share some folder on laptop and/or on Jamin to copy/remove/move some files?
Is it possible to use the std modem connection of my laptop for browsing the web from Jamin?
Is it possible to sync with Activesync my Jamin?
How can I do it, guys?
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
1) To browse, copy, move and delete files on you laptop just create standard windows shares. (right click folder or drive, select sharing)
To access the files from the Jamin select 'open path' in file explorer and type \\computer-name\\share-name. I recommend using the free Total Commander because built-in file explorer takes up to 3 times as long to transfer files (no idea why, it just hangs in the middle).
Unfortunately Windows Mobile does not support file sharing so this will not work viceversa (looking at Jamin files from laptop)
2) To serf the web through laptop internet connection you have to use 'internet connection sharing' (not a problem if you are using Win XP).
On the Jamin go to Settings->Connections->Network Card->Adapters
tap on your WiFi card in the list and enter your laptops IP as the gateway.
3) Sync is possible but tricky. I don't know the exact procedure but you need to set up a VPN (MS removed WiFi sync from AS 4+ for security reasons). The procedure is documented somewhere here, I just don't remember where exactly.
Great! Many thanks! ;-)
whoops...
Just another think....
What about hotspos?
I never search for a hotspot near me because I think I will not able to connect to a hotspot.
Can you exlain me the procedure to search and use hotspot? How can I see if the found hotspot is open or closed? Do you use some sw to connecti with WiFi?
I am not sure about your laptop, it depends on its WiFi card driver.
As for Jamin it is very simple: Turn on WiFi, it will automatically search for all available networks and display them stating if the network is open or secure. Then you just select a network you want and it will try to connect.
Also in settings->connections->Network cards you can see all the networks your device detected (even those that are not in the vicinity any more) when WiFi is on. Tap on a network to change its settings (like encryption type if any) or tap and hold for a menu.
If you don't mind wasting space on .NET CF 2 You can download a free app called Hitchhiker that helps auto-configure WiFi network connection.
Just remember: even if you found what looks like an open Hotspot it may be just an unsecured network that doesn't provide internet acces ot the network may block devices by MAC address, in this case it will show as open but you will not be able to connect.
Many thanks! ;-)
So, is it possible that I can connecto to a hotspot but I can't use it or if I see the hotspot connected that means that I can use it to surf the web?
After the connection is estabilished what I have to do or confiugre to surf the web using that connection?
Thanks a lot guy! You're helping me so mutch!
Whether you have internet access or not once you are connected depends on the network (what you think is a hotspot may be in fact someones home network that does not have internet access). If it is a public hotspot you don't have to do anything once you are connected except to open Internet Explorer.
Sorry 4 my stupid question but..
what is the difference between accesspoint and hotspot? :-(
I'm always thinking (WRONG) thet accesspoint is home LAN and hotspot is internet...
The definition thing is kind of tricky. When you say access point some people might just think of a device with an antenna that plugs in to your network to extend coverage and others might say it is the same as hotspot.
Hotspot is generally defined as a public access WiFi network.
All of that is semantics though. When you turn on a WiFi capable Pocket PC or laptop it detects everything with WiFi around it.
It can determine if the source is another computer (Ad-hoc network) or if it is a router (real network), what standard it is (g/b) and whether it is secured (requires key) or not. Also if the network broadcasts SSID (disabling it is another security measure) you may learn its name, although it may be set to default, which is usually the router model.
As far as I know there are two ways to learn what you are connected to:
1) Ask who ever is in charge of it.
2) Poke around, and see what you get.
One more thing: There is an app (not free) called PocketLAN. It shows you the network (on your Jamin) just like you would see it in Network Neighborhood on the PC, plus lets you ping other computers and stuff. You may want to check it out.
Thanks man!
Well! Yesterday I was able to manage shared folder of my laptop from Jamin with WiFi connection.
Thanks a lot!
Now I have another problem.... I clear all my "wifi networks" (?) from the tab visible in the screenshto.
I also clear all my wifi networks from laptop.
Tha problem is that I'd like to configure somethink on my laptop in order to automatically connect from my Jamin on it.
I'd like to turn on the wifi on Jamin and receive the notification that a connection can be estabilish to my laptop...
I tryed a lot but I can't do it!
Is it possible? The tab in attachment what rappresent? I have to confiugure somethink there?
I'm always thinking that wifi connection are visible simply turning on the wifi of any device...
Is there some guide for dummys? I don't want to annoing so mutch... :-(
levenum said:
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
Click to expand...
Click to collapse
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
phreaker18 said:
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
Click to expand...
Click to collapse
What are you trying to do? What is the problem you are getting?
If you start from the beginning I might be able to help you better.
In any case once you open 'Network selection' you will see two combo boxes - "drop down" lists.
You need to select same thing in both - "My ISP" than make sure when you connect to a network you select "The internet".
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi. it shows the connections excellent on both devices with ip address 169.254.72.236 on ppc nd 169.254.130.63 on laptop. i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
For some reason I can connect to the internet very easily through GPRS (even when roaming), but at home with my own wirelss LAN, I can connect with no problem, but each time I try to access anything on the internet, I get a pop-up stating "Could not locate remote server". I don't have a router, I am using a desktop as the gateway, I am currently accessing the net with my laptop through the same means. All configurations for the LAN appear to be correct, but I must be missing something on the JAMin. In the WiFi settings, I see the LAN, almost full signal - Ad hoc Mode - status is connected - I'm assigned an IP ... seems like everything is in order.
Will one of you wizards point out what I've missed? I know it's probably simple, usually is.
If I'm having trouble connecting a device to a network that has previously been working ok, the first that I do is turn off all network security i.e WEP, MAC address filtering etc. Then reboot the wireless access point/router and your device. If you still can't connect, you can start to blame your device.
Don't think it's a network prob...
Thanks Matterhorn, but my laptop is still connected fine, no problems there... I get the feeling that the PPC's only recognising the GPRS as a valid network for internet access... it works okay when I login to a commercial WiFi network (when I'm in the States) but for some reason on my own network here at home, it logs in, just can't find a server for some reason. The first thing I thought of was the firewall, turned it off and still no luck.
Any other ideas? I thought maybe there was a setting for default AP or connection, but can't find it, nor can I find an appropriate reference in the manual. Ugh!
Resolved!
It would seem my JAMin was trying to access the internet not through the gateway, but through my laptop. As I don't have the laptop setup to share an internet connection, it would allow my JAMin to connect, but that was all. I went in the room where my desktop is, registered on the network there and bingo!
Too simple, should have tried that right away but it didn't occur to me at the time. Thanks for the help anyway Matterhorn!
Hello,
I have got two wireless routers at home and my XDA Exec is connected to wireless router A.
i am trying to change the settings on my xda so that it connects to wireless router B, but i cant find the place where i can change the settings,
can you guys help me.
hi
i have managed to find out how to delete items from the list, by pushing hard on the stylus, i get the option of removing from the list.
I can't connect to the network which i want to connect to, originally i had it connect to my network "BTHome-hub" with no problem, and i wanted it to connect to my netgear router which is an unencrypted network, not connected to the internet.
to force it to reject the BTHome_hub, i changed the WEP key(yes, i am a noobie), so that i could get the next network, and then i started getting this problem of the xda showing all the devices in the neigbourhood as available (and some old devices which is shows as unavailable), and it runs through each of those available devices, trying to connect to each of them, and it fails to do that.
i have gone through a number of the posts on the forums. and have tried the following.
1. change Power Mode to Best Performance !! in my Wifi Settings.
2. i had no mac filtering on any of my routers, and have turned on mac router on one of the routers and added the mac address of my xda
3. i tried the following start-settings-connections-network cards-my network card connects work and rest to internet, this time around i was prompted for a password, whereas neither does my router have a password and the authentications i open and data encryption is disabled
(does connects to (in configure wireless network) the internet/work make any difference?
if one of the routers has a strongers signal than the other, would the xda wireless get confused and try to connect to the router with the stronger signal?
i was thinking that channel 11(on which i am) is quite busy and hence i changed the channel to channel 1, do i need to make the channel modiiications on the xda as well
what does the soft reset rest?
a) soft reset is like turning your desktop/laptop computer off and then on again. hard reset is like reinstalling the operating system on your pc.
b) if one router has such a bad signal that the universal loses the connection, the uni will look for another router. it will ask you which new one to connect to unless it already has settings for a new one.
c) if you're getting interference problems, set the router to channel 13. it's europe-legal only so american routers don't usually use it. your clients (pc's and your universal) will scan for the right channel.
d) at the pc shop where i work, we get LOTS of problems with BT Home Hubs' wifi - so don't think it's your fault, it probably isn't.
Hello, been a long time reader from my G1 to my G2 and now my nexus 4.
I am unfortunately not able to use my device on certain wifi networks which is a real bummer.
Being that i have a background in diagnosing computer problems in my real world life, i thought i would post my findings as i found some interesting things!
First i will say that the network i will use as the demonstration is secured with WPA2 PSK AES security and encryption.
I can connect to it and often find i have problems on the first connect to the network. By this i mean if i have made my wifi settings 'forget the network' and then try to connect again.
On the first time it seems to indefinitely hang, showing the message 'authenticating' on screen next to the network and if i long press on the network name and press modify, the dialog shows that i have a link speed of 1mbps.
I can usually get past this by turning wifi off and on and then reconnecting, at which point it will connect straight away and have a normal link speed. (in this example 72mbps).
After i am connected, i find that the following does not load:
-browsing webpages through chrome does not load
-the wifi icon turns grey
-play store cannot load anything
I find that i get assigned an ip address by dhcp correctly too with the right gateway and dns.
I decided to download a network tool to have a better look. I use fing personally.
I found it very interesting what i found, which no other threads about wifi issues mention.
Network discovery found every device on the local wifi network.
I was able to scan the services of my computer which is also on the network and it found everything, including a http server which i run which i could browse to.
In fact i could do everything through wifi with this device and most others.
Again it got interesting when I then took a look at my gateway, the router.
I had discovered its mac address which i can verify through my computer is correct which to my understanding, being that i can communicate through the wifi, means that i have the information available to send information to that physical device?
When trying to scan services, i find nothing, which is not true, at the very least it exposes a http server on port 80 which my computer can access.
When trying to ping i have 100% packet loss.
So at this point it is only the gateway i cannot access.
So i figure i could setup another computer which is connected to the network with a wire to share its connection through wifi onto that network and then i have a standin gateway?
I connected this computer through wifi to the network and pinged it succesfully with my phone. I then turn ICS on my wired adaptor to share to my wifi adaptor. I ensure that the wifi maintains an ip address in the right range and subnet.
I then try to ping that ip with the phone and it then gets 100% packet loss.
Could this be that when a device is configured to act as a gateway something changes about how it handles any packets sent to it that the nexus 4 is currently in compatible with?
elltg said:
So at this point it is only the gateway i cannot access.
So i figure i could setup another computer which is connected to the network with a wire to share its connection through wifi onto that network and then i have a standin gateway?
I connected this computer through wifi to the network and pinged it succesfully with my phone. I then turn ICS on my wired adaptor to share to my wifi adaptor. I ensure that the wifi maintains an ip address in the right range and subnet.
I then try to ping that ip with the phone and it then gets 100% packet loss.
Could this be that when a device is configured to act as a gateway something changes about how it handles any packets sent to it that the nexus 4 is currently in compatible with?
Click to expand...
Click to collapse
I have found a bit of a workaround that i can use!
When i said i turned on the wifi and ICS i did the following:
-Turned on wifi.
-Connected to wifi network.
-Turned on ICS on my wired network to share to my wifi
-Observed that my ip changed from 192.168.10.x to 192.168.137.1 with no gateway or dns.
-I decided to change my ip on the wireless to 192.168.10.x and gateway to my router 192.168.10.10
-I then tested.
I ran through this again but slightly different:
-Turned on wifi.
-Connected to wifi network.
-Turned on ICS on my wired network to share to my wifi
-Observed that my ip changed from 192.168.10.x to 192.168.137.1 with no gateway or dns.
-I decided to change my ip on the phone to 192.168.137.5 with gateway and dns as 192.168.137.1
-I then tested. And it works!
I know this doesnt fix the wifi issue itself, but for me, this makes a big difference as i can now use wifi at work where we also have poor mobile network coverage.
Edit:
Additionally i previously tried to setup this same computer to host a wifi network to share the connection using 'netsh' and creating a 'hostednetwork' but i found i was in the same situation where i still couldnt get the internet.