[Q] install apps - HD2 Android Q&A, Help & Troubleshooting and Genera

how to install zip +file apps in hyperdroid htc hd2

^^ use CWM Recovery

For MAGDLR:
Reboot your phone.
Press and hold PowerButton
Now you see the MAGDLR menu, with the volume buttons go to option 8
Now select flash zip from SD card.
Choose the zip you want to flash.
Once the operation is finished, press back button and then go to Reboot and that's all

Related

Wildfire does not start with CyanogenMod 7.0.3

I have rooted my HTC wildfire with Froyo and now I finally against the following problem. I'm using ROM CyanogenMod Manager 7.0.3 and it put him to create a backup (you can check). Then he goes far from everything and start it again, then there is a blue figure on a skateboard and there is an arrow around it (loading) it keeps happening all the time go and nothing else.
How is this possible?
Did you do a data wipe?
No, how can i do it?
Reboot into ClockworkMod Recovery, Then select Wipe Data / Factory Reset. Then, in staying within Clockworkmod Recovery, select Install Zip from SDCard and select the CM 7.0.3 Zip file.
If I reboot then do it but still loading. (a hat with an orange circular arrow)
Navigate in the recovery with the trackpad not the power button.
Did you see the hboot menu? If not, use the vol down button with the power button.
Hi robinjuuh,
Follow these steps:
1. Switch off the phone.
2. Press Vol Down Key and Power Button
3. You see the HBoot menu and from there press Vol Up/down to navigate to Recovery and Press Power Button to select the option.
4. The Phone now reboots you to ClockworkMod Recovery. Vol Up/down keys to navigate and press trackball to select the option.
5. Select Wipe Data from the main menu.
6. Navigate to advanced -> Wipe Dalvik Cache
7. Go Back by clicking the power button.
8. Select Install zip from SD Card -> Navigate to the cyanogenmod 7 zip file..
9. Press Trackball again to execute it.
10. Wait for 10-15 mins..
You're done.. Don't touch your phone.
Hope this Helps!

[Q] 4Ext recovery backup - help please

Hello.
I installed on my hd2 nativesd and wonder how they'll be back onscreen 4ext recovery to restore my backup, I'm thinking: (.
thank you.
how to get back on the menu 4ext recovery?
If it's recovery you want to boot turn on the phone and press and hold the home button!
sent.
shanman-2 said:
If it's recovery you want to boot turn on the phone and press and hold the home button!
sent.
Click to expand...
Click to collapse
I called the phone 6x holding the home button and nothing going for 4ext recovery = /
what happens when you press the "power" button for 3 seconds?
mengfei said:
what happens when you press the "power" button for 3 seconds?
Click to expand...
Click to collapse
opens the screen eMAGLDR v1.13 okay, the problem is that I need to open the 4Ext recovery to restore the backup and do not know How do I open the screen.
going to pair an Option 8. AD Recovery = noot boot sourc
remembering that this is the rom nativesd 4Ext recovery was installed in a different way.
brianxxx said:
opens the screen eMAGLDR v1.13 okay, the problem is that I need to open the 4Ext recovery to restore the backup and do not know How do I open the screen.
going to pair an Option 8. AD Recovery = noot boot sourc
remembering that this is the rom nativesd 4Ext recovery was installed in a different way.
Click to expand...
Click to collapse
Hey,
the trick is to tell magldr to boot 4ext if I remember right.
I don't know if you are using nand 4ext?! I am using 4ext from my fat32 sd partition. Here is how I did it:
With computer: download 4ext recovery, copy the zip file to fat32 sd partition on sd card. Create a folder in the root of the sd card. Call it 4ext. Extract the zip into that folder.
With phone: Boot into magldr, move to "10. Services" -> "1. BootSettings" -> "AD SD Dir" -> "4ext"
Back in Main menu: "2. Boot AD SD"
BUT:
I don't think you can recover your NAND backup to NATIVESD so easy, just in case you wanted to try that.

[Q] Lenovo Ideapad K1 can not install Gapps

I have flash the CM10.1 rom ([ROM][JB 4.2.2][CM10.1] for Lenovo Ideapad K1 Wifi) for IdeaPad K1 by Nvflash and after reboot I have done as step below from step 5-8 and then go to recovery mode. And I have tried to do for step 9 by tried to select by move "Vol +/-" down to "Install Zip" and then tried select it by press "power" but can't. Because after press "power" the selector will go to first row"reboot system now". Look like I can't do anything because after press "power" it will back to first row "reboot system now" and can't selected.
5. Go to settings, Developer options and select Advanced reboot
7. connect your tablet to the pc and save gapps on your sd card. Or download gapps via liink.
8. Go in Recovery via long press of Power, and select "Reboot" then "Recovery"
9. Flash the gapps package that you downloaded in step 1.
Please help to advice, How I can select "install Zip" to install Gapps?
surasitkan said:
I have flash the CM10.1 rom ([ROM][JB 4.2.2][CM10.1] for Lenovo Ideapad K1 Wifi) for IdeaPad K1 by Nvflash and after reboot I have done as step below from step 5-8 and then go to recovery mode. And I have tried to do for step 9 by tried to select by move "Vol +/-" down to "Install Zip" and then tried select it by press "power" but can't. Because after press "power" the selector will go to first row"reboot system now". Look like I can't do anything because after press "power" it will back to first row "reboot system now" and can't selected.
5. Go to settings, Developer options and select Advanced reboot
7. connect your tablet to the pc and save gapps on your sd card. Or download gapps via liink.
8. Go in Recovery via long press of Power, and select "Reboot" then "Recovery"
9. Flash the gapps package that you downloaded in step 1.
Please help to advice, How I can select "install Zip" to install Gapps?
Click to expand...
Click to collapse
You need to install Gapps while in Recovery.
Go into recovery.
Install ROM
Install gapps
Then
reboot out of recovery.
Make sure you have the gapps for 10.1
Sent from my TouchPad using XDA Premium HD app

[Q] Not able to install miui 6 beta in Redmi note 3G

Follow all the steps like rename to update.zip place in sdcard update through updater -> phone reboot and msg show up installing update then after few minutes phone restart itself without any confirmation ( is this normal) and as a result nothing changed.. Anyone plz help
no need to rename any thing if you are coming from stock rom V5 38.0.
jst go to software update in settings/about phone...
press options....
boot into recovery.(stock recovery obviously/ no need for any other recovery)
you will then boot in recovery,...
use "power botton" to enter recovery..
"volume down" to scroll through the recovery options,,,
and "volume up" to select the options to update from sd card and select the file (ext sd card will do the work)
jst take care to use the right bottons as i mentioned

[ROM] MIUI v7 for Meizu MX4 PRO

1) Self-installing firmware Flyme 4.2.8.2 (A), get Root, put SuperSu
2) Download files yadi.sk/d/9J5jAFm6nMwu6
3) Run SuperSu, hide, but not close
4) sets MX4pro_RecoveryInstaller-v1.0 file and run it
5) You see 2 buttons, push the upper (provide Root)
6) There was a red button, push it and reboot your smartphone
7) When you turn on the smartphone "Black logo Meizu", requires a lot of time only press "volume up"
8) hits the recovery, select the language and then "Install zip" / "choose zip from / sdcard", select the firmware file and put.
9) After the phrase "Install from sdcard complete", restart your smartphone and enjoy firmware.
really works, no bugs?
really works, no bugs
After reboot miui lag and block... Impossible to use... I try to clear data and nothing continue lag
The phone sticks at the boot screen (Which is written "MI". Is there any suggestion?
How do you do with the back and menu button ?
good
thanks ! 太尿性了~
MIUI its useful
Just To Remind everybody before you go and brick you GOOD device, is that your B00tloader must be unlocked before doing this or else you really will be stuck at the logo boot screen forever. I personally have not tried this.

Categories

Resources