Database Users

Wildfire does not start with CyanogenMod 7.0.3

I have rooted my HTC wildfire with Froyo and now I finally against the following problem. I'm using ROM CyanogenMod Manager 7.0.3 and it put him to create a backup (you can check). Then he goes far from everything and start it again, then there is a blue figure on a skateboard and there is an arrow around it (loading) it keeps happening all the time go and nothing else.
How is this possible?

Did you do a data wipe?

No, how can i do it?

Reboot into ClockworkMod Recovery, Then select Wipe Data / Factory Reset. Then, in staying within Clockworkmod Recovery, select Install Zip from SDCard and select the CM 7.0.3 Zip file.

If I reboot then do it but still loading. (a hat with an orange circular arrow)

Navigate in the recovery with the trackpad not the power button.

Did you see the hboot menu? If not, use the vol down button with the power button.

Hi robinjuuh,
Follow these steps:
1. Switch off the phone.
2. Press Vol Down Key and Power Button
3. You see the HBoot menu and from there press Vol Up/down to navigate to Recovery and Press Power Button to select the option.
4. The Phone now reboots you to ClockworkMod Recovery. Vol Up/down keys to navigate and press trackball to select the option.
5. Select Wipe Data from the main menu.
6. Navigate to advanced -> Wipe Dalvik Cache
7. Go Back by clicking the power button.
8. Select Install zip from SD Card -> Navigate to the cyanogenmod 7 zip file..
9. Press Trackball again to execute it.
10. Wait for 10-15 mins..
You're done.. Don't touch your phone.
Hope this Helps!

[Q] install apps

how to install zip +file apps in hyperdroid htc hd2

^^ use CWM Recovery

For MAGDLR:
Reboot your phone.
Press and hold PowerButton
Now you see the MAGDLR menu, with the volume buttons go to option 8
Now select flash zip from SD card.
Choose the zip you want to flash.
Once the operation is finished, press back button and then go to Reboot and that's all

[ROM] MIUI v7 for Meizu MX4 PRO

1) Self-installing firmware Flyme 4.2.8.2 (A), get Root, put SuperSu
2) Download files yadi.sk/d/9J5jAFm6nMwu6
3) Run SuperSu, hide, but not close
4) sets MX4pro_RecoveryInstaller-v1.0 file and run it
5) You see 2 buttons, push the upper (provide Root)
6) There was a red button, push it and reboot your smartphone
7) When you turn on the smartphone "Black logo Meizu", requires a lot of time only press "volume up"
8) hits the recovery, select the language and then "Install zip" / "choose zip from / sdcard", select the firmware file and put.
9) After the phrase "Install from sdcard complete", restart your smartphone and enjoy firmware.

really works, no bugs?

really works, no bugs

After reboot miui lag and block... Impossible to use... I try to clear data and nothing continue lag

The phone sticks at the boot screen (Which is written "MI". Is there any suggestion?

How do you do with the back and menu button ?

good
thanks ! 太尿性了~

MIUI its useful

Just To Remind everybody before you go and brick you GOOD device, is that your B00tloader must be unlocked before doing this or else you really will be stuck at the logo boot screen forever. I personally have not tried this.

How to enable Navigation Bar at the bottom of the display --- [ROOT] , [XPOSED]

HOW TO ENABLE NAVIGATION BAR ON GALAXY S6?​
1. ROOTING YOUR PHONE​
!!!DISCLAIMER!!!
I'M NOT RESPONSIBLE FOR ANY BRICKED AND/OR BROKEN DEVICES!
DO THIS ON YOUR OWN!
YOUR WARANTY IS NOW VOID!
!!!DISCLAIMER!!!
1. Go to: https://autoroot.chainfire.eu and try to find, or search for thw word: 'zeroflte'
2. Download the file and move the zip on your desktop, extract it
3. Make sure it's extracted in a folder, so that you keep it organised
4. Power off your device and boot into Download Mode (Do it by holding POWER+HOME+VOLUME DOWN keys)
5. After you get to the aqua-marine screen, press the VOLUME UP key
6. Go to: http://developer.samsung.com/technical-doc/view.do?v=T000000117 and download the file
7. Extract the file on your Desktop and run the application
8. After it has finished installing, connect your device to your computer
9. Run Odin application and see if the program is somewhere saying ID:COM with a bluish background
10. If it does, click on AP button and select the CF-Auto Root file
11. Wait for the program to say 'Leave CS'
12. Then click START and wait for the program to finish
13. After it's done, unplug your device and wait for it to boot
14. If your device reboots several times, don't worry, it's normal
15. When it's finished booting, check in your app drawer for an app called SuperSU
16. If it's installed, then congrats, you've just rooted your device​
2. INSTALLING A CUSTOM RECOVERY​
1. Go to: https://dl.twrp.me/zeroflte/twrp-3.0.2-1-zeroflte.img.tar.html and click the big blue Download button
2. When it has finished downloading, run Odin
3. Boot your device in Download Mode again and plug it in your computer
4. Click on AP in Odin and navigate to the 'twrp-something' file
5. Click on START and wait for it to finish
6. When your device restarts, quickly press: POWER+HOME+VOLUME UP to boot into Recovery Mode
7. When you boot into Recovery Mode you can click on Reboot and then System
8. Congrats, you're finished with installing a Custom Recovery​
3. INSTALLING XPOSED FRAMEWORK​
1. Go to: https://www.androidfilehost.com/?w=files&flid=64200 and click on the arm64 version of the file
2. When it's finished downloading, boot into Recovery mode and click on Install
3. Navigate to your Download folder and select the Xposed.zip file
4. Slide the blue bar to begin the installation
5. When the installation is finished, click on Reboot System and wait for it to reboot
6. Don't worry if it takes six weeks to boot, it's just like that, no one can solve it
7. When it boots go to: http://forum.xda-developers.com/devdb/project/dl/?id=18297 and click the big green Direct Download button
8. Make sure you moved the apk to your phone
9. Install it and go trough the setup proccess
10. When you're finished head over to the Xposed tab and grant it Root permissions
11. Search for a module called 'GravityBox [MM]' (without quotation marks)
12. Install it, don't open it, click DONE when it's finished installing and return to the XDA Labs app
13. Click on ENABLE AND REBOOT​
4. ENABLING THE NAVIGATION BAR​
1. Open the GravityBox app and go to Navigation bar tweaks
2. Enable Master switch and Enable navigation bar
3. Reboot your phone and there you have it​
THANKS TO:
ChainFire for CF-Auto Root
TeamWin for TWRP
Wanam for Xposed​

J510FN Magisk not installed problem

Hello Everybody. I am trying to install magisk to my J5 (J510FN) for the past few days. I am writing down what i am doing. I did that procedure 5-10 times with no results. Please let me know
To start the phone was bricked and i downloaded a samsung firmware to install.
https://ava4.androidfilehost.com/dl/Sj1K2v_P2Tk05YLBFZTc9g/1634062127/1899786940962603729/J510FNXXS3BSH2_J510FNDBT3BSH2_DBT.zip?
Download ODIN
https://samsungodin.com/download/Odin3_v3.13.1.zip
I had the Samsung/framework drivers from previous phones.
Press Vol Down+ Home+ Power Buttons and i enter download mode. I select AP -> go to the official Samsung firmware on the PC and select it.
Connecting the USB and i see the added on odin. Press Start.
It taking a while and then See the green Pass. Disconnect the phone. The phone is booting. I follow the instruction. select Not send diagnostic data and no google account. The phone is on.
Then settings> About phone> Software information> Tap on build number until the developer modem is on.
Back to settings>developer options OEM UNLOCK on, Auto update system off, USB Debugging on and ok.
Turning off the phone.
https://eu.dl.twrp.me/j5xnlte/twrp-3.3.1-0-j5xnlte.img and downloading the twrp recovery
Press Vol Down+ Home+ Power Buttons to enter download mode. Select AP -> go to the twrp on the PC and select it.
Connecting the USB and i see the added on odin. Deselect Auto Reboot from the options menu on odin.
Press Start. Its taking a second. Unplugging the battery. Putting on the battery.
Press Volume UP Home+ Power Buttons enter recovery mode. I go to wipe and select only the cache. Go to reboot and select to system> Don't install twrp.
Phone is booting.
Downloading latest magisk from
Releases · topjohnwu/Magisk
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
https://ava2.androidfilehost.com/dl/UpyKzryZOrpj1yhppDX8kA/1634373961/8889791610682932422/RMM-State-Bypass-v3-corsicanu.zip?
extract the official firmware above and take the boot image.
Connecting the phone with usb. Drag and drop on the phone the 3 files above.
Install magisk (allow unknown sources). Open magisk. next to magisk select install, next, select and patch a file. In top right show internal storage. In the top left 3 lines then galaxy. select the boot.img. Patched succesfully. Turn off the phone.
Press Volume UP Home+ Power Buttons enter recovery mode. install > install image> select the magisk_patched-***_**. flashing succesfully
select
https://ava2.androidfilehost.com/dl/UpyKzryZOrpj1yhppDX8kA/1634373961/8889791610682932422/RMM-State-Bypass-v3-corsicanu.zip?
flashed succesfully. Reboot system.
Opening magisk installed N/A
Can anybody help?
edit: after downgrading the magisk it appears installed. When i upgrade to the latest version it shows again not installed. When i install a module from smalipatcher it stays in a bootloop.