Hello.
I installed on my hd2 nativesd and wonder how they'll be back onscreen 4ext recovery to restore my backup, I'm thinking: (.
thank you.
how to get back on the menu 4ext recovery?
If it's recovery you want to boot turn on the phone and press and hold the home button!
sent.
shanman-2 said:
If it's recovery you want to boot turn on the phone and press and hold the home button!
sent.
Click to expand...
Click to collapse
I called the phone 6x holding the home button and nothing going for 4ext recovery = /
what happens when you press the "power" button for 3 seconds?
mengfei said:
what happens when you press the "power" button for 3 seconds?
Click to expand...
Click to collapse
opens the screen eMAGLDR v1.13 okay, the problem is that I need to open the 4Ext recovery to restore the backup and do not know How do I open the screen.
going to pair an Option 8. AD Recovery = noot boot sourc
remembering that this is the rom nativesd 4Ext recovery was installed in a different way.
brianxxx said:
opens the screen eMAGLDR v1.13 okay, the problem is that I need to open the 4Ext recovery to restore the backup and do not know How do I open the screen.
going to pair an Option 8. AD Recovery = noot boot sourc
remembering that this is the rom nativesd 4Ext recovery was installed in a different way.
Click to expand...
Click to collapse
Hey,
the trick is to tell magldr to boot 4ext if I remember right.
I don't know if you are using nand 4ext?! I am using 4ext from my fat32 sd partition. Here is how I did it:
With computer: download 4ext recovery, copy the zip file to fat32 sd partition on sd card. Create a folder in the root of the sd card. Call it 4ext. Extract the zip into that folder.
With phone: Boot into magldr, move to "10. Services" -> "1. BootSettings" -> "AD SD Dir" -> "4ext"
Back in Main menu: "2. Boot AD SD"
BUT:
I don't think you can recover your NAND backup to NATIVESD so easy, just in case you wanted to try that.
Related
Dear everyone,
I have a problem with my HD2 and it is very strange. I am not sure this is because of the hardware or the program or HSPL or Radio.
I can flash HSPL 2.08 now and can flash any rom with enter bootloader successful.
But it was stuck on green HTC logo during boot very long minutes. I must to take off the battery and put in again to try power on. I do this 2 or 3 times and then the window screen come and setup as instruction. It will auto turn off and restart again the stuck green HTC logo.
I decide to flash the Android 2.3.4 (NexusHD2 v2.8 NAND) by install cLK CWM. I did it successfully but it was stuck 1 time during I press HOME button to enter fastboot. The Android run so good and it was stuck again only when I turn off the phone or change SIMCARD.
Anyways, when I flash the stock rom (download from HTC website) via SD it was restart 1 time during 5% (maybe) and try to flash itself until finish. but I cannot boot it after flash just only show green HTC logo.
If I flash with Custom_RUU, it work perfectly by enter bootloader mode. and I can boot it but try 2 or 3 times because of stuck the green HTC logo.
Any body comment. Please welcome!
Or my HD2 has any problem with hardware?
Thanks.
Start again doing a task 29, then flash radio, then magldr, then clockwork then install androidbuild.zip using clockwork method and report back
Sent from my HTC HD2
whynot66 said:
Start again doing a task 29, then flash radio, then magldr, then clockwork then install androidbuild.zip using clockwork method and report back
Sent from my HTC HD2
Click to expand...
Click to collapse
Dear Whynot66,
Thanks for your comment, I will try to do it.
I am not sure will it run with magldr or not because last time it did not boot to MAGLDR after flash it.
I will report soon.
Hi, the below is what i have done.
1. Flash MAGLDR
o Download MAGLDR 1.13 (606 KB)
o Enter SPL by holding VOL DOWN key while booting the phone. (Make sure you have HSPL.)
o Run ROMUpdateUtility.exe to flash MAGLDR 1.13 (magldr.nbh).
2. Flash ClockworkMod Recovery
o Download MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M.zip (5.1 MB)
o Enter MAGLDR 1.13 by holding power key while booting the phone, and then select "USB Flasher" via "VolUp" and "VolDown". Confirm key is green "Call" button.
o Run DAF.exe to flash ClockworkMod Recovery 3.0.2.5 (MAGLDR_recovery_3.0.2.5.img).
3. Flash Android ROM
o Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
o Flash NexusHD2-Gingerbread_V2.7_NAND_(Android-2.3.4)_update.zip (84.51 MB)
I can do anything but stuck in ClockworkMod with the black screen and green HTC logo for long minute.
What can I do now? but it would be working with cLK flash.
This is becuase of hardware?
Thanks.
Oh I can flash now when select "AD Recovery".
Thanks.
Hi
I rooted my defy 2.2 using Superoneclick 2.1.1
than installed ROM manager for Nandroid backup.....
It is not booting in clockworkmod recovery..
the procedure i am following to get in recovery is :
1) Switch off
2) press and hold vol. down key
3) press power button
4) android symbol with a triangle appears and it's stuck there
5) now when I press both vol. down and up key, stock recovery appears
there is some messege there :
E:Can't open /cache/recovery/command
E:Can't open /cache/recovery/coller
how to boot in recovery
warewolf4586 said:
Hi
the procedure i am following to get in recovery is :
1) Switch off
2) press and hold vol. down key
3) press power button
4) android symbol with a triangle appears and it's stuck there
5) now when I press both vol. down and up key, stock recovery appears
how to boot in recovery
Click to expand...
Click to collapse
The method as you tryed is stock recovery, if you try to enter CWM recovery
after rooted, you must install Defy system recovery
- put system recovery.apk into SD card
- enable(Turn on) Unknown sources and USB debugging in Application settings
- install system recovery.apk from SD card (Use File manager or Root Explorer)
- Open System recovery App and Select Install Recovery system, it will show "Install success"
- Before reboot (Recovery reboot), you must Turn off "USB debugging"
Otherwise, defy will stuck in black screen
OK, If you want to reboot to CWM recovery mode, you can open System recovery App and Select Recovery boot
or Try that
http://forum.xda-developers.com/showthread.php?t=1032212
THBlurism said:
The method as you tryed is stock recovery, if you try to enter CWM recovery
after rooted, you must install Defy system recovery
- put system recovery.apk into SD card
- enable(Turn on) Unknown sources and USB debugging in Application settings
- install system recovery.apk from SD card (Use File manager or Root Explorer)
- Open System recovery App and Select Install Recovery system, it will show "Install success"
- Before reboot (Recovery reboot), you must Turn off "USB debugging"
Otherwise, defy will stuck in black screen
OK, If you want to reboot to CWM recovery mode, you can open System recovery App and Select Recovery boot
or Try that
http://forum.xda-developers.com/showthread.php?t=1032212
Click to expand...
Click to collapse
Worked perfectly.. Thanks!
Sir can you share the system recovery file download link...
So is there a way to boot into custom recovery with phone being off? What if a flash goes wrong and stuck with boot loop. How do you get into custom recovery to to restore backup?
mike102871 said:
So is there a way to boot into custom recovery with phone being off? What if a flash goes wrong and stuck with boot loop. How do you get into custom recovery to to restore backup?
Click to expand...
Click to collapse
What I always do when I flash something and it goes wrong is enter bootloader mode and flash a new sbf. I'm fairily sure to do that you hold power and volume up while booting.
Sent from my MB525 using XDA App
very usefull and easy to use
it was very easy, following the instructrions, just make sure to get the latest version of the software...
Zombiepiratez said:
What I always do when I flash something and it goes wrong is enter bootloader mode and flash a new sbf. I'm fairily sure to do that you hold power and volume up while booting.
Click to expand...
Click to collapse
I mistakenly rebooted after wiping cache,dalvik cache and sytem. Now I'm stuck at the moto logo. Is there any way to enter into custom recovery other than the flashing method you specified above?? I was using SlimBean(Slim-4.3.build.2-UNOFFICIAL-2013027-1124) with TWRP v2.6.3.0.
chandujram said:
I mistakenly rebooted after wiping cache,dalvik cache and sytem. Now I'm stuck at the moto logo. Is there any way to enter into custom recovery other than the flashing method you specified above?? I was using SlimBean(Slim-4.3.build.2-UNOFFICIAL-2013027-1124) with TWRP v2.6.3.0.
Click to expand...
Click to collapse
Same happened to me.
How can i get into CWM/TWRP to install a new rom?
Daimonion1980 said:
Same happened to me.
How can i get into CWM/TWRP to install a new rom?
Click to expand...
Click to collapse
Only way is to flash SBF.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
Only way is to flash SBF.
Click to expand...
Click to collapse
Yeah.. only that worked.. and I'm now on SlimKat!
Hello Everybody, I will be very grateful if someone help me deal with my problem.
I have been on Android rom with my hd2 phone since a year ago and decided to try the clockworkMod recovery about 3 days ago but it does not seem to work so i followed so many videos on utube as I was getting frustrated.
I have already installed magldr v1,13,
Hi guys, I am seriously in need of your help. On my HD2 phone, I think I have managed to install clockwork Mod recovery v 3.0.0.5 but can't install a ROM on the sd card. After flashing and trying to install a rom from the sd card, "message on my phone was", finding update package.....
Opening update package.....
E: can't open/sdcard/Typhoon cm7 v3.6.8 clk.zip is bad.( I am not sure if I installed the correct rom)
I have also tried following several video links but still no luck.
-I have tried to format my sd card several times
-wipe cache partition
-wipe data/factory reset
-wipe Dalvik cache
I am currently stuck and don't know what to do again.
I already have on my phone, HSPL: 2.08, Radio: 2.15.50.14 and Magldr: v1.13
After trying several tricks, I have realised that, I cannot boot into magldr any more.
Any help guys?
Folow steps:
- install HSPL: 2.08 and Radio: 2.15.50.14 (read all about installing hspl or your device will be bricked!!!)
- if you have activesync installed, right click on activesync/connection settings, untick "allow usb connection"!
- download mtty.exe to your computer
- switch your phone to spl screen (volume down + power)
- connect your phone to usb/computer
- run mtty.exe, chose "usb" (if you not see usb, something is not ok), if you see usb, press enter (if you see mtty> ...etc all is ok, if not -> repeat until you make mtty conection with your phone)
- in mtty window type: task 29 and press enter (it will format your romfs)
- in mtty window type: task 2a and press enter(it will format your romfs and relocate bad blocks)
- done, you formated your romfs -> exit mtty
- in activesync enable again "allow usb connection"
- go to folder MAGLDR113_DAF
- run ROMUpdateUtility.exe and wait until you have done installing magldr
- restart your phone and press power button until you see magldr menu
- sellect usb flasher in magldr menu
- go to folder clockwork and use proper cwm for your rom and run daf.exe
- done
Next step:
- download free version of the MiniTool Partition Wizard and install it in your computer
- format your sd card with MiniTool Partition Wizard (1x primary/fat32 , resize: do not forget to leave 1gb space for the an ext2 partition) (1x primary/ext2), apply changes ...done)
- so you have 2 primary partitions on your sd card (1x fat32 1x ext2)
- coppy rom.zip to your sd card and reboot to magldr (press power and wait magldr menu)
- select ad recovery, go to install rom from sd card, select "chose image from sd card", install, ...done, reboot
NOTE:
some roms not working if your sd card not have an ext2 partition of the 1gb!!
I am not 100% sure, but I am new to hd2 device, for magldr version you need magldr rom...
Hello, thanks for your quick reply. I will try all the steps and hope it helps me.
Sorry, I forgot to ask you where to download the mitty.exe file from and is there a particular version to download?
Thanks.
http://forum.xda-developers.com/showthread.php?t=371154
YawTakyi said:
I have already installed magldr v1,13,
.......
E: can't open/sdcard/Typhoon cm7 v3.6.8 clk.zip is bad.
Click to expand...
Click to collapse
more importantly, you have magldr but have downloaded teh cLK version of typhoon. no need to reflash anything. (cLK is an alternative to magldr, and requires a slightly different build rom, thats why there are two versions of most roms.)
Redownload teh correct version and it will flash, , probably no need for the 'ohyougottadoatask29standononelegreformateverythingreturntostockreapplyhsplflashanewradioreinstallwindowsgetanewpcandreflash' doomsayers though i suspect its too late and you already started. hehe.
You can´t Flash clk over magldr. Go to the site/post and Download the magldr version
And when you stil have problems and nothing works for you try a different Sd card.
Hi munjeni,
Thanks a lot, I have managed to boot into magldr and even tried to intstall clk typhoon cyanogen Mod 7 nightly v3.6.9 and tried both the MAGLDR and CLK but it failed. I had an error message after I have rebooted "nand kernel open failed"
I had earlier installed MAGLDR 150MB system/ 5MB cache clockworkMod Recovery V3.0.2.5 (Is this the right Recovery to install?)
I am just confused and don't know what to do again.
Now that I can boot into magldr how do I proceed from there?
Thanks for your advice;
YawTakyi said:
I have managed to boot into magldr and even tried to intstall clk typhoon cyanogen Mod 7 nightly v3.6.9
Click to expand...
Click to collapse
Again, try the Magldr version. Big ups. Let us know.
I am stuck after the error message "nand kernel open failed" I don't know where to start from...any ideas?
You should be more detailed. When does it say failed? When you try start cwm? Or after you flash the rom?
Get correct magldr rom
Enter magldr
Option 8-ad recovery.
If that's where it gives failed, go back into magldr, "USB flashing" and re apply cwm.
Once in cwm, choose wipe data/factory reset then "install zip from SD - choose zip" and select the typhoon zip.
Report back.
how to install zip +file apps in hyperdroid htc hd2
^^ use CWM Recovery
For MAGDLR:
Reboot your phone.
Press and hold PowerButton
Now you see the MAGDLR menu, with the volume buttons go to option 8
Now select flash zip from SD card.
Choose the zip you want to flash.
Once the operation is finished, press back button and then go to Reboot and that's all
Hello guys
I wanna share guides how to installing TWRP and Root your Galaxy A51 device.
Note: Your Phone must be Unlock Bootloader, and Enable (turn on) oem unlocking + enable (turn on) usb debugging in developer option.
Please make backup data first, because it will format data and erase file on your smartphone.
Tutorial how to Unlock Bootloader Samsung Galaxy A51 Click here
Link download >> Click here
Instaling TWRP and Root Samsung Galaxy A51
1. Turn off the phone
2. Pres and hold vol up + vol down, and connect usb cable to PC / laptop
3. Entering download mode
4. Open odin in your PC/ laptop, klik AP, choose file recovery disabler vb meta.tar, uncheck auto reboot in option.
5. Click start, untill get it pass text
6. Disconnect usb cable
7. Press and hold power + vol down, when screen off, press and hold power + vol up, when Samsung logo appeared, release power, keep hold vol up, entering twrp recovery
8. Wipe >> format data >> yes >> enter
9. Reboot recovery
10. Entering twrp, flash multidisabler >> transfer file from pc/ laptop or using USB OTG / SD Card
11. Wipe >> format data >> reboot recovery
12. Flash Magisk (optional for root) + flash DisableDM-Verity_ForceEncrypt >> transfer file from pc/ laptop or using USB OTG / SD Card
13. Reboot system
14. ± 5 minute booting
15. Entering welcome screen
16. Done
Credit to:
@ianmacd for TWRP
@erfanoabdi
@phhusson
@topjohnwu
@redymedan
Good Jobs Bro.. Liked!
redymedan said:
Good Jobs Bro.. Liked!
Click to expand...
Click to collapse
Thank you
Worked like a charm! Thank you so much!
Macke444 said:
Worked like a charm! Thank you so much!
Click to expand...
Click to collapse
Wow congratz brother
Glad to help you
Please share this tutorial
Men XDA forum is so cool
miraclegabriel said:
Men XDA forum is so cool
Click to expand...
Click to collapse
Absolutely yes!!!
Will that work for the SM-S515DL (Straight Talk/Tracfone) variant?
If I follow the steps and flash recovery 'disabler vb meta.tar' file I get an message:
'Only official release binaries are allowed to be flashed (RECOVERY)
Additionally I can not find the file twrp-a51-3.5.0_10-1_ianmacd.tar being refered to in the video
In the files provided there is a twrp-a51-3.5.0_10-4_ianmacd.img
Any clue please?
i accidentally checked auto-reboot and now my phone is stuck in a splash screen. Cant seem to boot into downloadmode or recovery, can anyone please help me?
/sdcard or /data/media/0/ for some reason doesn't seem to show the correct contents of the "Internal Storage" at TWRP, it instead shows folders with random names. Is this a bug with TWRP? Or is the /sdcard partition corrupted from the Format Data when installing Magisk?? I did manage to install Magisk and got my phone back to a working state with root, but TWRP not showing the correct contents of /sdcard can cause me confusion + will not let me do a backup anyways
RealEthanPlayzDev said:
/sdcard or /data/media/0/ for some reasons doesn't seem to show the correct contents of the "Internal Storage" at TWRP, it instead shows folders with random names. Is this a bug with TWRP? Or is the /sdcard partition corrupted from the Format Data when installing Magisk?? I did manage to install Magisk and got my phone back to a working state with root, but TWRP not showing the correct contents of /sdcard can cause me confusion + will not let me do a backup anywEncry
Click to expand...
Click to collapse
RealEthanPlayzDev said:
/sdcard or /data/media/0/ for some reasons doesn't seem to show the correct contents of the "Internal Storage" at TWRP, it instead shows folders with random names. Is this a bug with TWRP? Or is the /sdcard partition corrupted from the Format Data when installing Magisk?? I did manage to install Magisk and got my phone back to a working state with root, but TWRP not showing the correct contents of /sdcard can cause me confusion + will not let me do a backup anyways
Click to expand...
Click to collapse
Encrypted need to format data and reboot recovery twrp
azteria2000 said:
Encrypted need to format data and reboot recovery twrp
Click to expand...
Click to collapse
So my /sdcard is currently under encryption and to solve it I have to Format Data again?
Is this working with android 11 ui3.1?
Does the device still need to be booted with the button combo every time to enable root?
Hi, I think I messed up the key combo from step 7 and now my phone is stuck at Stuck on bootloop and can't be turned off. how should I proceed. ( I tried multiple key combos, the only response I get is when I hold down (the power key + vol down) then I am only restarting the phone to the same warning.
Chili Dog said:
Will that work for the SM-S515DL (Straight Talk/Tracfone) variant?
Click to expand...
Click to collapse
You can try
But you have to preparing original firmware if something goes wrong
Elo13 said:
Hi, I think I messed up the key combo from step 7 and now my phone is stuck at Stuck on bootloop and can't be turned off. how should I proceed. ( I tried multiple key combos, the only response I get is when I hold down (the power key + vol down) then I am only restarting the phone to the same warning.
Click to expand...
Click to collapse
When the phone start off (reboot) and Samsung logo appear, you can just hold the vol up and enter to twrp recovery
azteria2000 said:
When the phone start off (reboot) and Samsung logo appear, you can just hold the vol up and enter to twrp recovery
Click to expand...
Click to collapse
That doesn't work. anything else I can try?
Elo13 said:
That doesn't work. anything else I can try?
Click to expand...
Click to collapse
Please sent your video