Database Users

pola100 I flash spl 3.13.0000 and I cant anything flash,please I SOLVED IT :-) LOCK

Hi,
I have htc polaris (pola100)
but I unwillingly flash spl version 3.13.000 but now doesn't go anythink flash,
don't go flash anythink other spl version (1.25.0000, 1.28.0000)
Please anybody help me.

You had to flash the original ROM of your Polaris before flashing the Original SPL.
Can you get the tricolor screen?

I have original spl but after I flash hard-spl v2 and flash not original rom,but this rom was very bad.
So I would back my original wm6.1 rom htc, so i find original three original spl (1.25.0000 1.28.0000 3.13.0000) I flash spl 3.13.000 but now doesnt flash anythink anythink spl and anythink rom
please and now?
(ps: sorry my english is bad)

but yes a see my bootloader , i see red blue green and white color
on the left side is write:
POLA100
SPL-3.13.0000
CPLD-2
and the right side is write:
RUUNBH

okay, I understand.
Isn't there any ROM flashed?

i tried rom:
3LIT3_VI_Full
udK_Syrius_R7_WWE
c_shekhar_Pola_WM3.13.755CS_Build20755_Public_Final
and original rom htc wm6.1
But all roms frozen near 0% on htc display

I think you've bricket your phone

but on this list:
http://forum.xda-developers.com/showthread.php?t=351964&page=28
he have same problem as I.
mtelleria mtelleria is offline
Junior Member
Join Date: Jun 2008
Posts: 6
Default Problems installing HardSPL
Hi,
I have installed the last official version on WM6.1 on my htc, now i want to install one custom rom from this forum.
I tryed to istall first HardSPL, but i don't know why, the process get stuck at 0% of the istall and never continue.
In the 3 color screen appear:
POLA100
SPL-3.13.0000
CPLD-2
Someone can help me?
Thanks
____AND THIS ALSO BUT OTHER SPL:
he write:
"donchischotte" donchischotte is offline
Junior Member
On the screen I read:
-------------
RUUNBH
POLA100
SPL-1.28.0000
CPDL-2
--------------
Here is what I do and what happens when I try to use HARD-SPL V2:
1) I connect the USB cable and the writing on the device changes from "serial" to "USB"
2) I run romupdateutility
3) I check "I understand..." + next
4) I check "I completed..." + next
5) on the PC a message "verifying the information on your PDA phone, please wait" appears and after a while the device switches to a screen with a progress bar at 0%, while on the PC the following message appears:
--------------------------------------------------------------
Current information about your PDA phone:
Image version:
Select from below:
UPDATE Update the current ROM version
--------------------------------------------------------------
6) I click UPDATE and the following appears:
------------------------------------------------------------------
Verify that you want to update the ROM version:
From:
Image version:
To:
Image version: OliNex-2.20
------------------------------------------------------------------
7) I press "next" twice and I get the message "updating the ROM image on your PDA phone", but the progress bar is stuck at 0% and after a minute or so i get the ERROR[262] : UPDATE ERROR
I tried usinr both Vista and XP, with or without MicroSD and SIM card. It's always the same.
I tried flashing different SPLs (even the two original ones) with the same problem. If I try to flash a ROM I get the ERROR [294] : INVALID VENDER ID"
after 1% progress.
I HAVE SAME PROBLEM

I think you must wait Olipro or another chef here to say you how to refalsh SPL with 2.40 version in command line

You can try to flash you original ROM via SD-Card.

what is the solution ? I have the same problem with :
SPL-3.13.0000
I can't flash ...

Now its workhttp uff;-)
I flash my polaris 10* and all of a sudden work.

upgrade rom code error - please help

i want try ROM 1.72 WWE for my HD2. But when i install ROM from SD card show this error: Upgrade ROM code error. Please try again.When i can turn phone, on display is triangle with screamer. Please help.. Sorry for my english

hi try to flash with official rom (stock rom) from computer

I can't connect my HD2 with my PC. It's look like "PC cant see my mobile"

you will have to put youre phone in bootloader,
stock or custom rom you are trying to get on ??

stock rom ( from htc web page )

turn youre phone off, hold vol down while turning phone on till you get the coloured screen, if you have the rom on your sd card if will try and do it again,
you can get on to the bootloader screen right?

I did what you told me.. but it says: NOT ALLOW 00028002

sounds to me like you have an operator locked rom. Meaning 1.72 WWE doesn't work = rom code error
power off phone,
hold pressed 'vol down'
when in coloured screen, release vol down
connect usb, you will see word 'serial' become 'usb'
run HSPL2
choose 1.66.hspl
when phone restarts return into bootloader (vol down + power)
when 'serial' becomes 'usb' run the 1.72 WWE .exe NOT from sd card, do it over usb.

woow.. Now it´s working... Thanks so mutch...

...
udim said:
I did what you told me.. but it says: NOT ALLOW 00028002
Click to expand...
Click to collapse
charge your battery 100% if not you wil have this eror 00028002

Mod. edit: not dev related, moved to general

[Q] Have I bricked my HD2?

I was trying to follow these instructions:
http://forum.xda-developers.com/showthread.php?t=893948
I got as far as installing MAGLDR. When the phone restarted itself, it will not go passed the O2 welcome screen.
A hard reset (VolUp + VolDown + power) doesn't work.
If I hold vol down while I power it up it goes to the Red,Green,Blue,White screen where it says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
Can someone please advise me what, if anything I can do to get my phone working again?
Thanks.

no u are not bricked just reflash magdlr when its in the tri color screen vol down + power next time post in questions forums

Turn off phone by taking out battery and put it in
Then hold down vol down and then press off/end call button
should take you to coloured screen then connect to computer and it should say usb at bottom
then download the htc hd2 software off the htc site then flash the original software and should be back to normal

every nand build i test i do the following...
1. task 29
1b. flash radio
2. magldr
3. nand build

Are you holding end button while booting? that'll take you to magldr menu.
if it doesn't, then don't fear yet, cuz it's not bricked. Bircked is when you can't even turn it on, or it doesn't boot, or something like that. You can't even enter the rainbow screen when it's bricked.

sj1992 said:
Turn off phone by taking out battery and put it in
Then hold down vol down and then press off/end call button
should take you to coloured screen then connect to computer and it should say usb at bottom
then download the htc hd2 software off the htc site then flash the original software and should be back to normal
Click to expand...
Click to collapse
It's cool that you're trying to help but this is how people brick their phones. It's obvious, from him posting on here, that he's panicking. He'll go to htc site and just download any official rom and if he has a tmousa hd2 he's bricked it now. Not saying he does but you have to be specific with people around here. You'd be surprise how many complete newbs are on here who Just refuse to bother searching and reading

Yellowbrother said:
every nand build i test i do the following...
1. task 29
1b. flash radio
2. magldr
3. nand build
Click to expand...
Click to collapse
I've sucessfully put a few different NAND flavors on my phone but I have one quick question. What is "task 29"

help
teedor said:
I was trying to follow these instructions:
http://forum.xda-developers.com/showthread.php?t=893948
I got as far as installing MAGLDR. When the phone restarted itself, it will not go passed the O2 welcome screen.
A hard reset (VolUp + VolDown + power) doesn't work.
If I hold vol down while I power it up it goes to the Red,Green,Blue,White screen where it says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
Can someone please advise me what, if anything I can do to get my phone working again?
Thanks.
Click to expand...
Click to collapse
listen just download a official rom from hd rom development
and then extract the file with 7z or winrar
you will see a nbh file
change it to as follows leoimg.nbh
place it on any empty micro sd card and insert it into the phone
and then restart with holding vol down
after the tricolor screen you will see a grey screen with options for updating your rom
just follow the instructions and you will install a new wm6 rom
after that follow the video and the instructions for the noobs on the hd2 nand rom development section ,download the video and follow it as it says you will be fine.
i have been through this and this is what i did and i am with gauners hd nand version on my hd2 running perfectly

broknindarkagain said:
I've sucessfully put a few different NAND flavors on my phone but I have one quick question. What is "task 29"
Click to expand...
Click to collapse
It's used to clean NAND of leftover from previous ROMs.
Sent from my HD2 Droid using XDA App

There are a few methods to fix your problem actually,
Restore back to Factory Default with Official HTC firmware
Download Official HTC HD2 O2 firmware
Extract RUU_signed.nbh from the EXE file using 7-zip
Rename RUU_signed.nbh to leoimg.nbh and copy to the root directory of SD Card that is formatted in FAT16 or FAT32 and insert it into device
Power off your device
Hold onto the Volume Down Button and Power up the device
The bootloader will auto detect the leoimg.nbh file, and will start restoring back to default. This will restore your SPL, RADIO and FIRMWARE.
RED/GREEN/BLUE method
Power down the device
Hold Volume Down button and Power up the device
You will then see the RED/GREEN/BLUE screen
Connect the device via USB to your Computer
Wait for RED/GREEN/BLUE screen to show USB on the bottom instead of SERIAL
Run RADIO Upgrade (MAKE SURE YOU HAVE 2.10.50 and ABOVE)
I am GUESSING, your RADIO version is incorrect, causing it to loop.
You must use HSPL 2.08
You must use RADIO version that supports 576mb of RAM
Radio Thread
Incidentally, you can also reflash the firmware to any WINMO custom or official firmware while in RED/GREEN/BLUE screen as long as the bottom says USB and the device is really connected to the computer via USB. It might overwrite MAGLDR, and it might boot back into the official or custom firmware.
xcesivemastub8ah, both method works, again, help is "FREELY" provided to people who are willing to take the advise. People need to understand, if they tinker with something, they can and will tinker it to death. If you don't want to brick it, don't mess with it, use it as intended by the manufacturers, stock original.

No bootloader !!!!
LiFE1688 said:
There are a few methods to fix your problem actually,
Restore back to Factory Default with Official HTC firmware
Download Official HTC HD2 O2 firmware
Extract RUU_signed.nbh from the EXE file using 7-zip
Rename RUU_signed.nbh to leoimg.nbh and copy to the root directory of SD Card that is formatted in FAT16 or FAT32 and insert it into device
Power off your device
Hold onto the Volume Down Button and Power up the device
The bootloader will auto detect the leoimg.nbh file, and will start restoring back to default. This will restore your SPL, RADIO and FIRMWARE.
RED/GREEN/BLUE method
Power down the device
Hold Volume Down button and Power up the device
You will then see the RED/GREEN/BLUE screen
Connect the device via USB to your Computer
Wait for RED/GREEN/BLUE screen to show USB on the bottom instead of SERIAL
Run RADIO Upgrade (MAKE SURE YOU HAVE 2.10.50 and ABOVE)
I am GUESSING, your RADIO version is incorrect, causing it to loop.
You must use HSPL 2.08
You must use RADIO version that supports 576mb of RAM
Radio Thread
Incidentally, you can also reflash the firmware to any WINMO custom or official firmware while in RED/GREEN/BLUE screen as long as the bottom says USB and the device is really connected to the computer via USB. It might overwrite MAGLDR, and it might boot back into the official or custom firmware.
xcesivemastub8ah, both method works, again, help is "FREELY" provided to people who are willing to take the advise. People need to understand, if they tinker with something, they can and will tinker it to death. If you don't want to brick it, don't mess with it, use it as intended by the manufacturers, stock original.
Click to expand...
Click to collapse
I tried these two methods.
And what can i do if i can't enter in bootloader mode : it only reboot on bios (i think it is) and magldr.
I can't have a hard reset neither.
Radio : 2.15.5014
Hspl : 2.08

Fixed. Thanks for the help
Thank you all very much for the help and advice.
I did what was suggested and plugged it in while on tri colour screen, flashed the rom and phone is perfect again.
Your help is very much appreciated.
Next time I'll post in the questions section.

[Q] HD2 with broken USB port.. can i still play?

Got a HD2 with broken USB port, it already has android 2.3 but MAGDLDR 1.1. and no CLKMOD.
Anyway to update MAG to 1.3 and install CLKMOD?
thanks for any answer.
SD still works..

no magldr can only be flashed via usb

actualy you can flash magldr 1.13 by renaming the .nbh file like this " leoimg.nbh" then you put it on the sd card and start the phone in bootloader mode (the 3 color screen ) by pressing the vol down button and power simultaniously , then the phone will ask to update the image click send button , and voila you have mgldr 1.13 on hd2, BUT idk if you can flash cwm afterwards it can only be done via usb , on the bright side u can always use sd builds ....

Yes you can, to have android, follow this post by me : http://forum.xda-developers.com/showpost.php?p=20838125&postcount=11

I cant use my HTC Trophy. Please Help me out

Hello, I have HTC 7 Trophy. Here are some specs:
Bootloader
PC40100 SS-BC(4K)
SPL-5.10.2250.1(131801) MNG
MicroP (LED) 0x09
Touch A1(v10,20)
I cant use my HTC mobile. Please Help me out

What do you mean by you can't use it?
Can you load the OS? Are you stuck on the tri-color boot screen?
Have you attempted HSPL on it? (because the bootloader would need to be downgraded).

Heya
The phone is user locked.
I am not getting the proper wayout how to install new ROM update.
Which ROM is compatible with this Booltloger.
In the boot logger screen um am not getting Serial no also..
Please help me out with the proper process and how can do with the proper way..
Please help

You must of tried to install a custom rom without install DFT's HSPL. Or, you may have attempted to install another rom that wasn't fully compatibly with your phone?
Is your phone branded with your carrier, or does it simply say HTC? We need to find a stock rom that will work with your phone.

My HTC Trophy would not boot at all .. Please help
Followed update instructions, froze on step 8 of 9 of the WP7.5 update. Tried to cancel, phone totally dead and will not start at all.
Phone model: HTC 7 Trophy
Mobile Operator: Unlocked
IMEI : 351763042252302
S/N : HT13HR700038
P/N : 99 HKM004-00
Mobile OS version: cannot check, phone is dead
Firmware revision : cannot check, phone is dead
Hardware revision: cannot check, phone is dead
Radio software: cannot check, phone is dead
Radio hardware: cannot check, phone is dead
Bootloader : ?
Chip SOC: ?
All can be found on the phone under settings and about (I am aware that you are unable to restart your phone, so please provide what you can).
PC OS version: Windows 7
Zune version: 4.8.2345.0
Country: Ghana

Can you enter the bootloader by holding vol down+Power from power off?
You will probably have to flash a stock rom.

TheXev said:
Can you enter the bootloader by holding vol down+Power from power off?
You will probably have to flash a stock rom.
Click to expand...
Click to collapse
Hello.. The phone is totally dead .. not even charging .. Do you know where i can get the mother board .. or is there another solution for my situation
thx

Wow, no....
If possible, try to send the phone in for warranty work.. unless the phone wasn't unbranded when you bought it. I find it hard to believe that it won't start.
Try this first, put the battery pack in a different phone and charge it, then try to start the phone. I know for me, I have two different phones with the same battery pack.