hi i have flashed cm902 rom it booted up but it dont like me cause makes eroros so i wanted ro reflash with old stock 2,3,3 and with recovery bootstrap i thinked what i wild came into recovery but it just hanged and now no recovery only white triangle with yelow! and only logo m, so maybe someone hav this problem earlier and can help me?cause now im searching half day of work for searching for solution.
thanks fo anny help
Dont worry. Do this. First use the wall charger and charge your phone for at least 30mins. So if your phone is off then it will charge till 70-80%. Check if it is charging by looking at the micro-usb port lighting up.
Now go to the White triangle with ! mark. Then press @ button. You will get options. Select erase data by pressing volume button and then clicking enter button on your keypad.
After the wipe has been done pull out battery. Then start RSD Lite on your computer. Put the battery to your phone. Now press both volume up and volume down together and then power button for 2secs. Leave power button. You will see it in bootloader.
Now load sbf file on RSD software and wait for it to recognize your phone. Then click start. Thats it. Your phone should be ok.
hey,
i tried today to change my rom for defy from 2.2.2 to 2.1 (doesnt matter why..)
after let it go to 100% and then he sad please power off the phone manualy
i power off and it doest reply, i close the rsd and then just the moto logo apper .. i tried hard reset but it doesnt help to the sitiuation.. the room was 36mb but the nand have a 100+ mb and i didnt touch the nand or put it in the sd card - is that matter?
ty for helping, niv~!
you bricked your phone by trying to downgrade the bootloader version. flash back the 2.2.2 sbf and it should work again.
sent from my cm7 defy...
i dont think my phone apper in RSD LITE - SHOW DEVICE..
nivv said:
i dont think my phone apper in RSD LITE - SHOW DEVICE..
Click to expand...
Click to collapse
boot up to the bootloader (when turned off: vol up+power button long press), and after that connect to pc. maybe this way it will recognize your phone. does the white led light up when connected to pc?
sent from my cm7 defy...
zakoo2 said:
boot up to the bootloader (when turned off: vol up+power button long press), and after that connect to pc. maybe this way it will recognize your phone. does the white led light up when connected to pc?
sent from my cm7 defy...
Click to expand...
Click to collapse
i do that and it get me to the white triangle with exclmation point in it if that is the bootloader..
the white led is ON when it connected to PC
nivv said:
i do that and it get me to the white triangle with exclmation point in it if that is the bootloader..
the white led is ON when it connected to PC
Click to expand...
Click to collapse
volume UP not down the triangle with the exclamation mark is the stock recovery, you can access that by pressing vol up+down at the same time at the triangle. the bootloader is a terminal-like black screen. but be careful: without any working rom you cant charge your phone, and if the battery is low, you cannot flash anymore. good luck!
Question go in the Q&A section
After I tried to flash my phone, it wont start anymore.
If I push Volume Down + Power Button there is still no reaction.
Only the LED is blinkin Red, Green (3x), Red
What did they mean?
Maybe you cant tell me how i can wipe it or something.
I can't connect to PC by the way.
Sorry for my bad english.
Hi,
I have a nexus 4 that is stuck on opening animation and won't go to fastboot\recovery.
(a weight fell on it a long time ago. Worked for the next 3 days then died.)
Situation now is that it is stuck on the opening animation (lollipop) when turned on.
When trying to go to fastboot using volume up+down+power I get a blinking red light (volume up\down only with power button only resets the device or turns it off.)
Computer recognizes the device and I can see it in ADB devices while stuck on opening animation, but it says "unauthorized" so I can't use "adb reboot recovery" command.
Trying to press up+down+power while connected to computer gives solid red light and repetitive "device connected" sound from the computer every 1 sec.
Phone was never rooted or flashed in any way.
Any idea what I can do? I don't mind restoring factory image or factory reset.
Thanks to anyone who tries to help in advance
History-I flash my phone by mi flash(FASTBOOT ROM) but during flash my phone bricked and fastboot option was gone and red indicator light was beeping and display was dark and phone was vibrating when i press power button.
WHAT I HAVE DONE-
1.I open the phone back part and connect the phone with pc by test point method phone was connected to mi flash by com3/com4/com10 port &qualcom loader 9008 was connected on device manager.
2.I flash the phone by these 2 stock rom
markw_global_images_V8.1.2.0.MBEMIDI_20161230.0000.00_6.0_global_bca6f282bc
markw_global_images_V9.6.1.0.MBEMIFA_20180614.0000.00_6.0_global_0a59446674
3.phone flash success but when i press power button phone did not on same dark display and phone was vibrtaing when press power button
4.power+volume up/down did not work
WHAT CAN I DO NOW EXPERTS PLEASE HELP
SORRY FOR MY BAD ENGLISH