Related
I am using 2.3.6 rom and a try to flash a sbf, i using RSDlite 5.5 flash and it shows me "PASS".So I remove the usb cable and try to power on my phone but it can't.
I no any light, led....and i can't get into the bootload,is my phone bricked?
And now, I have a white led when i connect to PC and press the power button...
admelater said:
I am using 2.3.6 rom and a try to flash a sbf, i using RSDlite 5.5 flash and it shows me "PASS".So I remove the usb cable and try to power on my phone but it can't.
I no any light, led....and i can't get into the bootload,is my phone bricked?
And now, I have a white led when i connect to PC and press the power button...
Click to expand...
Click to collapse
You verified the CG version before flashing the full SBF ??
you can still flash a new rom threw rsd lite.
I would say you done the same as me I tried to flash a version with a lower version and it wouldnt boot at all.
Power the phone on holding the volume up button and connect the USB, It wont show the bootloader screen but RSD lite should say its connected.
You might have to plug it in and out of the usb cable a few times (well I did) till RSD lite connects to it.
You will have to find out what version you had previously and flash the same version or higher (try to stay on the same version if you can)
Dunno if stock recovery would help:
How do I enter Recovery Mode?!: With the Phone off press VOLUME DOWN then, while still pressed, power up the phone and leave VOL key pressed until you see a Yellow triangle, once you see this you are in Recovery now press Vol Up and Vol Down at the same time (if you are in Froyo) and the menu will appear, if you are on Éclair the menu should appear without having to press anything
This is a copy/paste from all in one guide
if its like mine the screen does not show anything, you cant get into bootloader or recovery screen. Well I think it goes into bootloader as RSD lite can read it but it will not show anything on the screen.
I think my problem was trying to install the CM9 kernel as I used the same process and left out flashing the CM9 kernel and it worked perfect, Lucky some one that helped me get my phone working again suggested this to me.
So I now have ICS working by just installing it and Gapps and left out the CM9 kernel
Not sure if that is what you are trying to do but you should be able to flash a new rom with what I said above. Just making sure its the same BL version as your previous install
Thz for all your help,I can fix my defy+ since I using bl7 sbf
I think I will root it and flash other rom soon
Hello everybody ,
I have a Defy and .. is dead ! The RSDLite dont show the device .. and .. i try the instructions from http://forum.xda-developers.com/showthread.php?t=1618718 .. but no result ..
i cant restore sbf with RSDLite and .. the phone does not leave the screen
Details.. what do you see on screen?. Where are you stuck at?
Is your battery charged??
Sent from my Defy+ using Tapatalk 2
yeah .. the battery is charged ..
when i turn on .. dont show nothing .. the led is aways off. .. sometimes turn on white .. nothing more ..
in rsdlite .. the phone dont show ..
tiagomoraisc said:
yeah .. the battery is charged ..
when i turn on .. dont show nothing .. the led is aways off. .. sometimes turn on white .. nothing more ..
in rsdlite .. the phone dont show ..
Click to expand...
Click to collapse
are u able to go in Boot loader MOD?
press Volume+ key and Power on the phone..
it will go to BL Mod CONNECT PHONE TO PC VIA USB open RSD Lite
then RSD Lite will Recognize your phone
then flash your SBF
1.Download RSD lite v5.3.1 or later version and install it.
2.Download MotoDev USB drivers from here (http://bit.ly/K59zlZ and install it.
3.Turn off your phone
4. Hold down Volume Down and Power button for your phone to enter Stock Recovery.
5. Press both Volume buttons at the same time for the options to appear.
6. Do wipe cache.
7. Do wipe data/factory reset.
8.Take your battery out.
9.Hold Volume Up and Power button and put the battery back in while holding the buttons - your phone will start in Bootloader mode.
10.Connect the phone which is now in the Bootloader mode to the PC.
12. Open RSDLITE which you have installed and select the Downloaded sbf
13.Click "Start"
14. You can see "SW Update in progress" on your phone's screen - the flashing is in process.
15. The flashing process takes around 5 minutes, after which RSD lite will reboot your phone.
16. Wait until RSD lite says "PASS!" and then you're free to disconnect your phone (*if RSD lite doesn't say "PASS!" after 2-3 minutes and your phone has booted up, you're still free to disconnect).
17. Root your phone using Doomlord's script or SuperOneClick.
18. Install SndInit for defy+ from here.http://dl.xda-developers.com/attachd...itDefy_2.3.apk
If you need any more info on how to root or flashing the rom, Please ask and stay away from trouble.
Tanks Anands3 ...
but .. my phone dont show in RSDLite .. and .. dont enter in Stock Recovery screen ...
when i press Volume+ and Power ..
nothing happens ...
tiagomoraisc said:
Tanks Anands3 ...
but .. my phone dont show in RSDLite .. and .. dont enter in bootloader screen ...
when i press Volume+ and Power ..
nothing happens ...
Click to expand...
Click to collapse
It might won't show up but try this..
Press volume+ & Power button. Even if the screen remains blank, connect it to RsdLite. If it shows up in RsdLite, flash the SBF.
If it doesn't, then unfortunately, its bricked.
Sent from my Defy+ using Tapatalk 2
Ok ... this screen need show ..
so, i will get other batery with a friend ..
and will try again ...
later i talk about ..
tanks guys !
Hummm ... bad news .. !!!
When i hold Volume (-) & Power .. the phone dont enter in Stock Recovery screen!
The only thing that happens is: LED lights in WHITE, when I connect to the computer. just it!
what i can do now?!
Did you change the battery with a one that is charged FOR SURE?
same problem last several days and i fixed it:
+remove battery and put it back (make sure battery full charged)
+press power button and volume+ for 5 secs,even the screen still black
+connect to computer,u can see white led and RSD lite will display usb connected
+flash *.sbf
if it doesn't work u can try with another computer or cable
good luck!
Auris 1.6 vvt-i said:
Did you change the battery with a one that is charged FOR SURE?
Click to expand...
Click to collapse
Yeah ..
i try with other batery ..
And still no luck?
haiwru said:
same problem last several days and i fixed it:
+remove battery and put it back (make sure battery full charged)
+press power button and volume+ for 5 secs,even the screen still black
+connect to computer,u can see white led and RSD lite will display usb connected
+flash *.sbf
if it doesn't work u can try with another computer or cable
good luck!
Click to expand...
Click to collapse
Hey man .. tanks . but ...
When i press Volume+ & Power nothing happen ..
when i conect the phone to computer nothing happen in RSDLite ..
so .. i cant flash a .sbf file ..
and .. i try with other cable .. and .. no response ..
i have a big problem!
When you connect, does it turns White LED on??
Sent from my Defy+ using Tapatalk 2
when i connect the LED is White .. just it
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
talakoto said:
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
Click to expand...
Click to collapse
Seems your problem is flashing sbf with too low CG version - sbf u mentioned is CG5 Chinese eclair. Depending of what u had before u can install CG6 or CG7 sbf from this site
talakoto said:
i have the same problem...
my battery is fully charged...
when i press the power button, it wont turn on... even the led doesnt blink..
when i press the power button + volume up or volume down, nothing happens...
when i try to connect it with RDSLite v5.3.1, it recognizes my defy+...
i tried to flash diffferent stock roms but nothing comes up even the flashing proccess suceeded (PASS)...
my defy+ is still at nothing status...
the last rom i flashed is JORDN_U3_97.21.51.sbf...
HOPE SOMEONE CAN HELP US...
THANKS IN ADVANCE!!
Click to expand...
Click to collapse
Try flashing the last rom that worked for you.
Sent from my Defy+ using Tapatalk 2
corrinti said:
Seems your problem is flashing sbf with too low CG version - sbf u mentioned is CG5 Chinese eclair. Depending of what u had before u can install CG6 or CG7 sbf from this site
Click to expand...
Click to collapse
im currently trying all of the roms listed on the link you gave...
some gave me error Err:A5,69,35,00,27 on bootloader... (seems much better status than before)
some gave me nothing... (just like before - blank screen, no led)
17 more roms to go...
talakoto said:
im currently trying all of the roms listed on the link you gave...
some gave me error Err:A5,69,35,00,27 on bootloader... (seems much better status than before)
some gave me nothing... (just like before - blank screen, no led)
17 more roms to go...
Click to expand...
Click to collapse
i flashed the ROOTED EU CEE rom from this thread http://forum.xda-developers.com/showthread.php?t=1542956
THIS ROM CAN'T DOWNGRADE,TRY IT IF U HAVE NOWAY TO LET YOUR PHONE ALIVE
i uninstall my MOTOdefy boot menu and my phone is not start pls giveme d information to how to install boot menu in my phone pls pls pls
Don't get it...
What rom were you on? What did you do?
We can't help you with this.
Verstuurd van mijn MB525 met Tapatalk
my phone is MB525 Moto defy and my os is cm9 ics 4.0.4 super stable android os, pls how to get my boot menu.
pg0512 said:
my phone is MB525 Moto defy and my os is cm9 ics 4.0.4 super stable android os, pls how to get my boot menu.
Click to expand...
Click to collapse
Do you mean clockworkmod? If you're rooted, you can install cwm for Defy.
--Just understood your question. Do you get stuck on M logo when startup? Are you able to enter cwm (press volume button when you see a blue led on startup)? If so then try to clear cache/dalvik.. If that doesn't helps and you still have CM9 zip and kernel zip on sdcard, then flash those. That should get you going. Worse case is you flash a sbf via rsdlite if nothing works.
My phone is stuck on M logo, my phone is rooted and no red or others colors of led light, just stuck on M logo. i just want to enter my boot menu pls give me d way to enter boot menu.i tryed to connect my phone on my PC but didnt usb detect so RSD is not detect my phone and i didnt install SBF file
pg0512 said:
My phone is stuck on M logo, my phone is rooted and no red or others colors of led light, just stuck on M logo. i just want to enter my boot menu pls give me d way to enter boot menu.i tryed to connect my phone on my PC but didnt usb detect so RSD is not detect my phone and i didnt install SBF file
Click to expand...
Click to collapse
To flash a SBF you need to hold Vol up & Power button.
You will enter Motorola Bootloader
From there connect your phone to your PC with USB
Open RSD Lite
Load the SBF (Make sure it's the right one for your phone..)
Flash
When you turn on the phone, do you get the blue/green LEDs? If yes, press vol down button at blue led,and you get into clockworkmod menu, and you can reflash your cm 9...
Sent from my MB525 using xda app-developers app
sa3e1 said:
When you turn on the phone, do you get the blue/green LEDs? If yes, press vol down button at blue led,and you get into clockworkmod menu, and you can reflash your cm 9...
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
pg0512 said:
My phone is stuck on M logo, my phone is rooted and no red or others colors of led light, just stuck on M logo. i just want to enter my boot menu pls give me d way to enter boot menu.i tryed to connect my phone on my PC but didnt usb detect so RSD is not detect my phone and i didnt install SBF file
Click to expand...
Click to collapse
He doesn't have any LED lights, therefore CWM recovery isn't installed. An SBF should be flashed.
Hi my power button recently broke and i tried to flash twrp recovery to my working defy with wiui installed which allows to to wake the phone with the volume rocker, it has corrupted my recovery and my defy wont boot into android is my phone bricked as i cant think of anyway to recover it from this. Thanks
morgs640 said:
Hi my power button recently broke and i tried to flash twrp recovery to my working defy with wiui installed which allows to to wake the phone with the volume rocker, it has corrupted my recovery and my defy wont boot into android is my phone bricked as i cant think of anyway to recover it from this. Thanks
Click to expand...
Click to collapse
read this guide: http://forum.xda-developers.com/showthread.php?t=1216982
Boot into Bootloader mode (power-on while holding Vol-Down)
You may need to flash an SBF to get going again.
_ossie_ said:
read this guide: http://forum.xda-developers.com/showthread.php?t=1216982
Boot into Bootloader mode (power-on while holding Vol-Down)
You may need to flash an SBF to get going again.
Click to expand...
Click to collapse
Hi thanks for your reply i cant get into bootloader mode as my power button is broken?
morgs640 said:
Hi thanks for your reply i cant get into bootloader mode as my power button is broken?
Click to expand...
Click to collapse
Pull the battery and reinsert it while holding Vol-Down. This usually works as a power-up.
Do it while connected to a PC. The PC should sound the "device connected" sound.
If the white LED comes on, it usually means the phone is OFF and charging. No LED usually means it's ON and in BL mode (you should get the white text on black screen, but you won't if you have flashed a 'bad' SBF).
Try this a few times.
If nothing else is broken you should be able to get into BL mode and flash an SBF.
But your power button needs to be mechanically fixed at some stage, or your phone isn't going to be much use.
_ossie_ said:
Pull the battery and reinsert it while holding Vol-Down. This usually works as a power-up.
Do it while connected to a PC. The PC should sound the "device connected" sound.
If the white LED comes on, it usually means the phone is OFF and charging. No LED usually means it's ON and in BL mode (you should get the white text on black screen, but you won't if you have flashed a 'bad' SBF).
Try this a few times.
If nothing else is broken you should be able to get into BL mode and flash an SBF.
But your power button needs to be mechanically fixed at some stage, or your phone isn't going to be much use.
Click to expand...
Click to collapse
I have tried all of this already and unfortunately it doesnt get into bootloader mode it just comes up with the moto logo. The phone was working before i tried to update my cwm to twrp i didnt flash an sbf. The power button works fine it must be stuffed on the mainboard i took it apart and the button works fine, why do i need the power button for anyway?
morgs640 said:
I have tried all of this already and unfortunately it doesnt get into bootloader mode it just comes up with the moto logo. The phone was working before i tried to update my cwm to twrp i didnt flash an sbf. The power button works fine it must be stuffed on the mainboard i took it apart and the button works fine, why do i need the power button for anyway?
Click to expand...
Click to collapse
now can you turn on your phone? the power btn works?
try flashing official sbf , root and 2nd-init again.
p.s make sure you have above 20% batt or you gonna spend your time just like me plugging the defy mobo directly to 5 volts.
-Danik- said:
now can you turn on your phone? the power btn works?
try flashing official sbf , root and 2nd-init again.
p.s make sure you have above 20% batt or you gonna spend your time just like me plugging the defy mobo directly to 5 volts.
Click to expand...
Click to collapse
The power button doesnt work but it turns on when battery is inserted, i cant get the phone to pickup in rsd
morgs640 said:
The power button doesnt work but it turns on when battery is inserted, i cant get the phone to pickup in rsd
Click to expand...
Click to collapse
Hold the Volume Up key while inserting the battery.
_ossie_ said:
Hold the Volume Up key while inserting the battery.
Click to expand...
Click to collapse
just goes to moto logo, with usb cable it does the same after about a minute. i can get into the android bootmenu (where u can go into cwm overclock from etc) but recovery doesnt load comes up with missing file error due to me trying to flash twrp
morgs640 said:
just goes to moto logo, with usb cable it does the same after about a minute. i can get into the android bootmenu (where u can go into cwm overclock from etc) but recovery doesnt load comes up with missing file error due to me trying to flash twrp
Click to expand...
Click to collapse
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
_ossie_ said:
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
Click to expand...
Click to collapse
Even if it does, power button is malfunctioning, hence can't select it...
Sent from my MB525 using Tapatalk 2
dbarrera said:
Even if it does, power button is malfunctioning, hence can't select it...
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
the menu button works to select items in cwm so no problem there, do u mean in bootloader?
_ossie_ said:
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
Click to expand...
Click to collapse
options are
- boot
-cpu
-recovery
-tools
-reboot
dbarrera said:
Even if it does, power button is malfunctioning, hence can't select it...
Click to expand...
Click to collapse
<<< head hits desk >>>
OK so if the phone will boot into recovery it SHOULD also boot into bootloader ?
Maybe I confused OP by saying hold "Vol Down" when I meant "Vol UP" ???
Anyway, OP will probably not get too far without a functional Power button.
_ossie_ said:
<<< head hits desk >>>
OK so if the phone will boot into recovery it SHOULD also boot into bootloader ?
Maybe I confused OP by saying hold "Vol Down" when I meant "Vol UP" ???
Anyway, OP will probably not get too far without a functional Power button.
Click to expand...
Click to collapse
Ok im with you now haha i thought you meant i needed the power button in cwm and i was thinking what for? but i cant get into bootloader anyway so doesnt really matter. I cant get into anything except cwm, holding up just brings up a black light up screen and phone wont recognize in rsd
morgs640 said:
... holding up just brings up a black light up screen and phone wont recognize in rsd
Click to expand...
Click to collapse
Are you SURE? I have had Bootloader work even though nothing shows on screen (when I flashed the wrong SBF). The screen was black but RSD could still "see" the device.
Defy has a locked bootloader (cannot be overwritten), so the fact that you can boot into recovery indicates the bootloader is still there and working. Maybe the problem is in your version of RSD Lite, or your version of drivers installed on the PC, or in your USB cable?
Try uninstalling the drivers from the PC, then rebooting, then attaching the phone and insert battery while holding Vol-Up. This SHOULD reinstall the BL drivers to the PC. Try another USB cable - I have had cables which work for charging but not for data transfer.
_ossie_ said:
Are you SURE? I have had Bootloader work even though nothing shows on screen (when I flashed the wrong SBF). The screen was black but RSD could still "see" the device.
Defy has a locked bootloader (cannot be overwritten), so the fact that you can boot into recovery indicates the bootloader is still there and working. Maybe the problem is in your version of RSD Lite, or your version of drivers installed on the PC, or in your USB cable?
Try uninstalling the drivers from the PC, then rebooting, then attaching the phone and insert battery while holding Vol-Up. This SHOULD reinstall the BL drivers to the PC. Try another USB cable - I have had cables which work for charging but not for data transfer.
Click to expand...
Click to collapse
Alright sound good thanks ill give it a go on my other pc using a different cable, thanks for your continued help with the problem
No go looks like the phone is cooked tried another defy and picks up straight away in rsd on boith pc's and mine doesnt work on either thanks for your help people.
ols help me....defy stuck at black screen...no bootloader
rsd lite recognises through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
:crying:
hey u all
my phone is a brick ...:crying:
jast used RSD Lite and the .SBF pass = ok but when the motorola defy try to move on the computer says "usb unrecognized"
what can i do from here ? please help me its an emergency.
tnx alot :good:
the screen is black\not responding when i push the power on ... im not geting the motorola logo :crying:
what can i do ?
only the power light is on when im charging the phone...
please help me :good:
Pic status of my motorola defy
The phone is jammed like this - please what can i do ?
Can you boot into bootloader? (Power + Volume up)
Install motorola drivers for pc, install rsd, enter the bootloader with power+volume up buttons like xiihyou said, then connect your phone via usb to pc and start the rsd proces flashing....
Should Help
The same happen to me , solution is simple .....
Just Install drivers ( HERE http://forum.xda-developers.com/showthread.php?t=1100585)
Pull out battery, now put it back with Power button and Volume up pressed together
you should be in bootloader mode
Now choose the right SBF file for your Phone .....
After you Defy boots up, Shut it down -> wipe data and cache ( Press Power button and Volume Down)
And now your mobile should be OK
xiiihyou said:
Can you boot into bootloader? (Power + Volume up)
Click to expand...
Click to collapse
no..what can i do from here ?
tnx ?
yzeroy said:
The same happen to me , solution is simple .....
Just Install drivers ( HERE http://forum.xda-developers.com/showthread.php?t=1100585)
Pull out battery, now put it back with Power button and Volume up pressed together
you should be in bootloader mode
Now choose the right SBF file for your Phone .....
After you Defy boots up, Shut it down -> wipe data and cache ( Press Power button and Volume Down)
And now your mobile should be OK
Click to expand...
Click to collapse
did that but still cant get the phone into bootloader
the phone is connected to the computer (usb) but there is only a white light on the top screen that it :crying:
please help me what can ido from here ?
tnx alot.
i had a similar problem, i couldn t turn on the phone or enter the bootloader, it was just a black screen... then i just install the drivers on pc and start a rsd without entering the bootloader, it worked for me....
tuneon said:
did that but still cant get the phone into bootloader
the phone is connected to the computer (usb) but there is only a white light on the top screen that it :crying:
please help me what can ido from here ?
tnx alot.
Click to expand...
Click to collapse
So just start flashing SBF it must work .... (you may needn´t get phone into bootloader mode because it is in bootloader mode)
yzeroy said:
So just start flashing SBF it must work .... (you may needn´t get phone into bootloader mode because it is in bootloader mode)
Click to expand...
Click to collapse
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
tuneon said:
The RSD Lite cant recognize the phone - i haved tried all the method with the + & the - & battery but still nothing its geting realy despair
please what can i do next ? its like the phone is died but the white light is still on when connected to the usb cable.
Click to expand...
Click to collapse
First of all check your battery. Charge it using external charger or use mcgyer methode.
Sent from my Motorola Electrify using Tapatalk 2