Can anyone help me please !
I've got some problems with my touchscreen.
So.. it works perfectly but time after time (approx. 2-3 hours) the touchscreen adjust itself! This means, when I touch the mini keyboard for a word (e.g. "e") the "r" is highlighted! For a better view I took ScummVM to watch with the cross and it seems to me, like there is a failure in the touchscreen!
Has anybody the same problem?
How can I fix it ?!?!?
I send it back where I bought it, but the result is the same as before!
Thanks!!!
Hi mt2002,
Does re-aligning your screen (settings->system->screen) help, or does this only lasts for a few hours too?
Think you've got to send it back again, they didn't solve your problem in the first place and this feels to me like a warranty issue.
I have the same problem, and I cannot fix it, too.
by Avers
Touch screen issues
Yeh had the same issue. Just seems ot be fairly randomm for me.
Hi, same problem here. I tested with a hard reset, another Rom flashing and instaling and desinstalling programs. The best thing I discover is that software like batti (add a line in the top of the screen with battery %) and vbar (task manager) accelerate the alignment problems.
I had ROM 1.11 and now 1.12 (no 1.13 in spanish language) and know I have less problems than before.
Another thing I realized is that the dealignment is not the same in all the screen: sometimes is ok in the upper part and a little bad on the bottom one and sometimes is the other way.
Anyway now I can work with it with no more than 2 realigments a day, depending on the use.
Hasta luego!
I am facing the same problem. Reinstalled the OS with version 1.11, and then 1.12 but both doesn't help.
After hard reset or reinstallation, the screen is ok for a while. But then disalignment happens. Re-aligning works for a while, and then sucks.
I think there is a problem with the hardware, not the softwares.
Do you think?
Try pressing on the back of the unit with your other hand,
(Holding edges with thumb and other fingers and pressing your first finger on the back)
While using the screen.
Also try making a new note and just drawing a grid pattern (Like a huge tic-tac-toe board)
Hello guys ... never thought i`d post a problem thread but here i am.
Here is the situation: sometimes the screen graduately fades to black&white vertical lines. It happens 90% of the time i use the volume key in Today screen, sometimes it happens sudently when i`m navigating windows menus (Programs, Settings), and oftenly in iGo (2006). Problem doesn't ocur when the keyboard is out.
I have searched but nobody seems to have this problem.
P.S. Attached a zip with a short movie of what exactly happens, maybe someone has a solution.
I thought a OS upgrade would solve the problem, but it didn`t (i recently upgraded to TNT WM 6.1). Could it be my wizard is a G4 and i used soft spl to upgrade? (didn't install a original rom before upgrade)
I have a different screen problem. My touch screen does not recognize when I do try to use touch selection using my finger or stylus. Anyone with any suggestions?
I`ve found a thread on the HTC Hermes forum:
http://forum.xda-developers.com/showthread.php?t=321163
It seems to be a loose display connector, or not sufficient pressure on it. Hope i`ll get the time to disassemble the wizard to see if i can fix the darn think.
Nobody else with this problem, or other solutions?
Yep, same problem, found the same solution
http://forum.xda-developers.com/showthread.php?t=303872
too scared to fix it
I took the darn thing apart a couple of months ago, and noticed that the problem is with the display cable ... when the slide is closed, the cable is bent (at 180 deg), and probably the cable wires have thinned. (the problem never appeares with the slide open.
Didn`t think of a way to fix that darn bend, so i`m back at square one. Did notice though that the fadeing seems to be in direct connection with the backlight setting.
I have had the same problem as the first post and now I've got the problem of the second, any ideas?
Try flashing the 2.19er Radiorom, that solved this problem for me.
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Hey guys,
I just ended up with a g1 for a good deal. Only problem is that the touchscreen has a problem were it will shake back and forth between screens. I mean If im on the home page, and i slide it left or right to the other pages. It dances between the 2 for a couple for a seconds. Also I cant touch anything in the bottom right hand corner of the screen. So that brings me to my question. Since the glass is intact, that would mean that the digitizer is busted? As you may have noticed I really dont know. But if anyone could offer any help in my direction because I'd like to fix this myself. As Always...
Thanks in advance,
Lord CraiguS
Please i have the same problem. I would like to know thanks.
Same problem
As for me, this problem started when i`ve replaced the digitizer with a new one. It seems exactly the same as you described. I`ve noticed, that it dissapears temporary when i block the device (power button) and unblock it again. But sooner or later it appears again.
I suppose it is some internal bad contact in connection or in a flexcable of touchscreen.
However, not solved this problem yet.
Seems to be that i found a solution at least for my G1. I`ve installed a new CyanogenMOD 6.1.0-RC1 (i had 6.0.0 previously) - and the problem is not appearing for at least 2 hours!
I suppose it is somehow related with software handling of touchscreen taps.