Database Users

[Q] how to install TyphooN CyanogenMod 7 nand

can anyone help me installing this, i have installed other rom before but i don't understand how to do whit this one.
i got MAGLDR on my phone and then i gonna download this verison http://www.multiupload.com/11VO5R7EM4
Right?
and load in to usb loader in MAGLDR and then what, how do i use the files in the zip i have download? use costumruu ? or how

You have to flash clockworkmod (short CWM).
With cwm you can flash zips to your nand and also make backups:
http://forum.xda-developers.com/showthread.php?t=987531
Code:
For MAGLDR 1.13, booting from NAND:
Download the file attached and named "magldr_recovery_3.0.2.5.zip"
Download a partition layout incl. recovery from [URL="http://forum.xda-developers.com/showthread.php?t=898913"]this thread[/URL] which fits your ROM you want to use best and unzip it into "C:\recovery" for example
Copy over "magldr_recovery.img" from inside the zip archive into this folder "C:\recovery", delete existing "recovery-raw.img" and rename "magldr_recovery_3.0.2.5.img" to "recovery-raw.img"
Flash the recovery and partition layout using "DAF.exe" as usual and described in the thread of raiderx or the ROM provider
Boot Recovery with menu point "8. AD Recovery"
You're done
Click to expand...
Click to collapse

fischerben said:
can anyone help me installing this, i have installed other rom before but i don't understand how to do whit this one.
i got MAGLDR on my phone and then i gonna download this verison http://www.multiupload.com/11VO5R7EM4
Right?
and load in to usb loader in MAGLDR and then what, how do i use the files in the zip i have download? use costumruu ? or how
Click to expand...
Click to collapse
I take it u want to install TyphooN_CM7_v3.1.3 rom?...Then simply visit the ROM's thread for clear instructions on how to successfully flash it...Its quite straight-forward.
Clean Install MAGLDR:
1. Task 29 (Just for measure)
2. Flash Radio(2.15 Recommended if u haven't alrd done so)
3. MAGLDR 1.13
4. MAGLDR 130MB System/4MB Cache (ClockworkMod Recovery v3.0.2.4)
5. Install TyphooN CyanogenMod 7 .zip with CWM (boot in2 MAGLDR, select AD Recovery > Select Zip to install from SD card, Flash.)

i succeed install the rom. but now i am stuck on the Typhoon loading screen

fischerben said:
i succeed install the rom. but now i am stuck on the Typhoon loading screen
Click to expand...
Click to collapse
has it something to do with my kernel?

fischerben said:
has it something to do with my kernel?
Click to expand...
Click to collapse
You might have done something wrong along the way...Wat steps did take to flash the ROM? ...d kernel included in the ROM usually doesn't give problems as its been tested before release...did u flash another?

Yes i flashed hyperdroid and it worked, so i don't understand why it's getting stuck on boot with typhoon

Try the steps mentioned above by " voncrane " , make sure u do a task29 before everything and when u enter the recovery wipe full data / it should work if u follow the steps .

help
i cant find where the link to download typoon mod 7

Unable to use flash using CLK and Clockworkmod

Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance

Wrong forum.

I'm having the exact same issue - I was just about to open a new thread here but saw this thread and a post stating wrong forum - Please advise where can I post it?
Many thanks

LMGray said:
Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance
Click to expand...
Click to collapse
What ROM are you using?
What is System partition Size for that Rom you're using?
Have you used right partition size while flashing MagLdr or Clk?
And have you used Ksubedi's Toolkit?
Because the symptom you're describing is only experienced when you use a partition size smaller than what is recommended.
For example if the Rom requires a partition of ATLEAST 200M and you flash a partition of 150M. You will get stuck at the Logo Screen. AKA HTC Screen. Or as you proclaimed, it won't even boot. So please provide more information as to which Rom and partition size you used and I will try my best to help you.
And don't pay any attention to A jerk telling you "Wrong Forum"
We will help no matter where you post it.
And Spuri give your Rom and install method, I will try my best to help you as well.
Sent from my HTC HD2 using XDA App

Thank you so much - here it goes..
I've been flashing Android roms for a while but for the last couple of weeks I'm having issues with installing any CWR/CLK rom - After flashing the rom, the screen is stuck at GO GO GO and then it goes in a boot loop. I have searched and I have followed all the steps down to the T. Anyway, following are the steps I have taken so far:
Format SD Card using SD Formatter
HSPL3 (2.08)
Task 29 (Using HD2 NAND Toolkit)
Install Radio (2.15) (Using HD2 NAND Toolkit)
Install MAGLDR (Using HD2 NAND Toolkit)
System Partition (As Recommended by the Chef) (Using HD2 NAND Toolkit)
wipe cache partition
Wipe Dalvik Cache
Partition Card with 1GB (As Recommended by the Chef)
install zip from sdcard
Fix Permissions
Reboot
Currently, I'm using BOYPPC-SHIFTPDA_Desire HD A2SD V20 (21.Jul) via DAF method without any issues.
I have used different SD cards but no luck - Currently I'm using 16GB Lexar Class 4. I can flash fine via DAF method. I have also done dual boot with Android and Windows Mobile without any problems. So,if I have successfully run an Android via a SD card (dual boot) so obviously SD card is not the problem?
This is really doing my head in so if anyone can help me with this, that'd be great.
Many thanks

Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App

rafiqzadah said:
Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks for your prompt response - Btw, I forgot to mention that I have a LEO 512 - should I still install the second file which is for LEO 1024?

Rofl sorry ignore the step 1 and then jumping to 3. Just do this exactly. And I have adjusted the file to a EU version Rom with partition of 190m. And so with your SD that was partitioned already, you should be good to go.
1. Go here and Download. http://www.multiupload.com/ZH0WFJBT6P
3. On second Link download HD2_Core_Droid_Desire_HD_V1.6_TMOUS_NAND_ONLY_LEO1 024.rar file 4. In Toolkit Do "Task29." Then Flash MagLdr with size 190M and cache size 5M. 5. After the Flash of Magldr. Boot into MagLdr by HOLDING DOWN!!! Power Button during bootup. 6. Go to Option "5. Usb Flasher." and wait for "Wait USB...USB." 7. Once "Wait USB...USB." is confirmed. Go to the "Daf.exe" file in the COREDROID V1.6 file you downloaded before and "RUN AS ADMINISTRATOR." 8. Once Finished Reboot into MagLdr AGAIN. This Time go to Option "8. AD Recovery." 9. Since you have already Partitioned SD. Then no Need to do so again. 10. Go to "Mounts and Storage" Then "Mount USB Storage" 11. Copy the Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip to SD. 12. Once finished Hit the "BACK ARROW" Button. 13. Go down to "Flash ZIP From SDCard" then "Choose Zip from SDCard" 14. And Pick Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip and flash. 15. Once finished, Reboot Phone, Leave it for about 20 Minutes because its First Boot. And Your Done. 16. Hit Thnx if this Helped.
Sent from my HTC HD2 using XDA App

Sorry, I'm a bit confused - Do you want me to flash Pyramid rom or core droid rom? For Pyramid rom, use 190M and for Core Droid 400M right? I did previously try flashing the latest Pyramid rom which 1.7 bit it didn't work - I used 200M for that but I'll try your recommendation and see how it goes.
Thanks.

Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App

rafiqzadah said:
Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
One final clarification - You mentioned that I should install 190/5, when I install DAF.exe from the core droid folder, wouldn't that override the 190/5 as I was under the impression that DAF.exe was a partition size as well.
Thanks
EDIT: This step 'Then Flash MagLdr with size 190M and cache size 5M.' I don't understand either - After Task 29, shouldn't I be installing mag and then flashing the 190/5 partition?

Ok - I followed the steps and after flashing the rom, the screen is stuck at GO GO GO - I'm sick of this - I just don't know what's the issue.
Anyone?

I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.

spuri78 said:
I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.
Click to expand...
Click to collapse
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.

dawid. said:
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.
Click to expand...
Click to collapse
I used the following:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 10M
system ya 390M
cache ya 5M
userdata ya|asize|hr allsize
Just want to reiterate that the GO GO GO issue is after flashing the rom - I can boot in CWR fine - The weird thing is that I have always followed what the chef has recommended in his/her rom - This issue has had me stumped - I virtually can't install any NAND rom - Maybe I should try a third SD card? I just don't know.

Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version

Okay I will give you exact instructions. And BTW the Daf.exe is so you can boot into AD Recovery in MagLd.
1. Task 29.
2. Go to toolkit and Center Left you will see box with sizes of 150 200...... Click on 200M. Under that box is a little box with 45M as default cache size, change it to 5M.
4. Go in MagLdr. This is what I mean, try to go to Option "8. AD Recovery." It wont right? So go into Option "5. USB Flasher" and run the Daf.exe from the Coredroid folder and run as administrator.
5. Once finished boot into MagLdr once more this time going to Option "8. AD Recovery."
6. (This step is optional, but mandditory if you have not done so already)Once in AD Recovery, go to "Advance" menu, partition SdCard, and use the size 1024M,it will ask for swap size next, use 0M.
7. Once partitioned, go back to "Mounts and Storage" then to "Mount USB Storage."
8. Once mounted, copy the Pyramid Rom to root of SdCard. Once finished, hit back arrow once.
9. Go to "Install ZIP from SDCard" then "Choose ZIP from SdCard" and choose the Pyramid Rom. Let the flashing finish. And reboot phone.
10. Let the phone settle for 5 minutes in first boot, go through Setup. Then reboot phone.
Sent from my HTC HD2 using XDA App

dawid. said:
Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version
Click to expand...
Click to collapse
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back

spuri78 said:
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back
Click to expand...
Click to collapse
Download CWR 4.0 and flash it in MAGLDR (it has configured parition size for this rom so just flash it don't change anything): http://www.multiupload.com/VZ1WB57AOY
then
Download this rom: http://www.multiupload.com/8UPNV5WUZU and install it in CWR.

one option: switch to DAF(MAGDLR)....

[Q] please help regurding the clock work mod recovery

Hello every one. im using hyperdroid cm7 rom, i just flashed it two weeks ago with the MAGLDR 1.13 and the clock work mod v1.3_150MB but now im having a problem with clock work mod recovery and that is when i try to load the clock work mod recovery it says "invalid image" something like that and it dosent load the clock work mod recovery and goes back to the MAGLDR1.13 menu so how i should deal with it should i re-flash the clock work mod 1.3_150mb recovery? and if i do this will i have any problem with the rom or will lose any thing? please help me and thanks in advance to all.....

Wow 40 views not a single reply i think i asked a wrong question....

I would reinstall CWM. Be sure to install the CWM recommended by the Rom's chef as they can be different partition size. You should not loose your data by reflashing CWM. I believe the partition you are looking for 150M. Here is a link: http://www.multiupload.com/41E9UMRO45

Yea re flashing cwm will wipe all the nand partitions because they are all re created empty. If you have been using an ext partition you can save the contents of that, I.e your installed apps, , and if the rom you were on put the whole data part there you can maybe save your data too, tho I suspect you will have to bite the bullet and start from scratch.

samsamuel said:
Yea re flashing cwm will wipe all the nand partitions because they are all re created empty. If you have been using an ext partition you can save the contents of that, I.e your installed apps, , and if the rom you were on put the whole data part there you can maybe save your data too, tho I suspect you will have to bite the bullet and start from scratch.
Click to expand...
Click to collapse
sam thx but my question i dont have an ext partition for the apps so if i re flash the 150 partition of cwm will i lose roms data and will i have to reinstall the rom again? and by doing this is there any chance bricking the hd2? what should i do please recomand.

michdj00 said:
I would reinstall CWM. Be sure to install the CWM recommended by the Rom's chef as they can be different partition size. You should not loose your data by reflashing CWM. I believe the partition you are looking for 150M. Here is a link.....
michdj ya i was recommended to use the 150 partition but im afraid to reflashing it what if i lose all the rom data and brick my hd2.....
Click to expand...
Click to collapse

I do not really understand your problem...
Why do you go into CWM if you already loaded the ROM and using it successfully?
What do you want to do??
To get to CWM, go to Magldr select option 5 I believe (Recovery) press GREEN (call) button and you'll get CWM menu.
Does that answer your question?

Recovery is option 8.
I assume the issue was created be cause you tried ROM Manager with MAGLDR, it will mess up your phone. (use ROM Manager only with cLK Bootloader)

thanks
Tester30 said:
I do not really understand your problem...
Why do you go into CWM if you already loaded the ROM and using it successfully?
What do you want to do??
To get to CWM, go to Magldr select option 5 I believe (Recovery) press GREEN (call) button and you'll get CWM menu.
Does that answer your question?
Click to expand...
Click to collapse
tester30 basically i needed to update a fix for the rom and it has to be done by loading into the cwm so when i got the fix from the rom thread i tried to load the cwm and i face the problem....

thanks
Marvlesz said:
Recovery is option 8.
I assume the issue was created be cause you tried ROM Manager with MAGLDR, it will mess up your phone. (use ROM Manager only with cLK Bootloader)
Click to expand...
Click to collapse
Marvlesz i think u r very right actually i did a the "fix permission" in the rom manager and also pressed "backup rom" in the rom manager menu.I did it because in the rom manager it sayas clearly that backup using clock work mode so i thought of doing that what should i do now please help me out

sandb said:
Marvlesz i think u r very right actually i did a the "fix permission" in the rom manager and also pressed "backup rom" in the rom manager menu.I did it because in the rom manager it sayas clearly that backup using clock work mode so i thought of doing that what should i do now please help me out
Click to expand...
Click to collapse
it would be better you flashed mgldr and cwm partition and install the rom again.

mutil said:
it would be better you flashed mgldr and cwm partition and install the rom again.
Click to expand...
Click to collapse
i guess i have to do it.thanks for the info multi.

Boot problem or something

hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?

tsagas said:
hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?
Click to expand...
Click to collapse
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM

Have you Installed CWM recovery ?

Nigeldg said:
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM
Click to expand...
Click to collapse
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?

tsagas said:
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?
Click to expand...
Click to collapse
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version

tsagas said:
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version
Click to expand...
Click to collapse
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels

tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Dont worry man, once you install CWM, you will be able to install a NAND rom of your choice on the internal memory of your phone. The rom you install will have everything eg. kernels, scripts. Basically all you need to do is install CWM then install a rom of your choice. Here is a guide to do install clockworkmod(CWM)
http://www.addictivetips.com/mobile...kmod-recovery-on-android-htc-hd2-with-magldr/
and here is how to install a rom using clockworkmod
1. turn off you phone
2. turn it on while keeping the power button pressed (dont let go until you see the MAGLDR menu)
3. Go to option 8 "AD recovery"
4. You will boot into clockworkmod
5. Go to mounts and storage
6. Mount the sd card(connect your phone to the pc via usb cable, and then select this option)
7. Place your downloaded rom .zip file on the sd card, root level
8. unmount your fone.
9. Go to "install zip from sd card option"
10. then select "choose zip from sd card"
11. Select the rom.
12. The rom will be installed on your fones internal memory.
13. When it is done, just reboot your phone.
14. ENJOY
NOTE: Remember to choose the correct partition size when selecting which clockworkmod to install. there are 150mb, 250mb and 400mb partitions available. The procedure to install them is the same.
Hope it helps.
any questions
Give me a thanks if you found this post useful

tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.

Nigeldg said:
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.
Click to expand...
Click to collapse
Installed CWM done everything right and i still got stuck on AD Recovery GO GO GO

http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money

tsagas said:
http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money
Click to expand...
Click to collapse
I genuinely cannot make it any simpler than this guide. When it says flash the correct partition size, use the HD2 NAND Toolkit to flash a 175mb partition.

[Q] **** Solved **** Cannot install Nand Roms....

:victory:****** Solved *******
Hi, thank you for all of your help and assistance.
It was all down to selecting the correct partitions (and me getting over enthusiastic in flashing roms and not reading FULLY on how and what partitions are required)
I have used HD2 Nand toolkit, and partitioned MAGLDR, then partitioned SD card within Clockworkmod.
Thank you all again for pointing me in the right direction...
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt

matt_tee said:
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt
Click to expand...
Click to collapse
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)

Marvlesz said:
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)
Click to expand...
Click to collapse
Thanks,
I will give it a go!
Have already downloaded toolkit, and just watching the video on how to use...
Matt:fingers-crossed:

So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...

try the links below, it might help

matt_tee said:
So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...
Click to expand...
Click to collapse
I don't use magldr, so I am not sure.
But I think you have to "MAGLDR recovery update" first, and then after it finishes you have to "magdlr repartition". Im not sure though.

How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?

After Task29 (don't do task29 again) you have to do the following: http://forum.xda-developers.com/showthread.php?p=25781675#post25781675 until you see the "recovery" .. from there, dont continue to flashing wp7, just put your rom on your sd and flash it from recovery. (don't forget to thank the the one who made the thread/guide)
Don't forget to NOT use 300mb, but use the one written on your rom's thread.

matt_tee said:
How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?
Click to expand...
Click to collapse
You can't have CWM without MAGLDR. If you've flashed CWM you shouldn't have lost MAGLDR at all, so I don't know what you did wrong. Task 29s are also almost always useless and unnecessary, if a guide says 'task 29' as the first step then usually you can just skip that part. I find that the best guide is the one in my sig, try it out.