Database Users

[Q] Is my phone bricked?

First thing is first :
Radio 2.12.50.02.2
aMAGLDR 1.11
CWM Recovery 3.0.0.5
SPL 2.0.8
I was flashing from a custom nand to Hyper Droid CM7 v1.0.3. Now that I boot my phone it goes through magldr like normal but loaded zimage, says: load done ...123456 GOGOGO
Then it boots up into CWM recovery.. I tried to install the zip from here and it formats the boot and the system like normal... then copy's all the files to system. The install completes like normal. Then I reboot and it goes right back into CWM recovery. I have tried to flash other roms.. but now my phone wont active sync with my computer. I can only mount it. Any help would be amazing at this point. I have been troubleshooting this brick for the past 5 hours..
Thanks in advance for any help

I'm assuming i will have to start from scratch with wm 6.1... if so how would i flash the os to the phone is my phone doesnt sync with wmdc?

Gunblade77 said:
First thing is first :
Radio 2.12.50.02.2
aMAGLDR 1.11
CWM Recovery 3.0.0.5
SPL 2.0.8
I was flashing from a custom nand to Hyper Droid CM7 v1.0.3. Now that I boot my phone it goes through magldr like normal but loaded zimage, says: load done ...123456 GOGOGO
Then it boots up into CWM recovery.. I tried to install the zip from here and it formats the boot and the system like normal... then copy's all the files to system. The install completes like normal. Then I reboot and it goes right back into CWM recovery. I have tried to flash other roms.. but now my phone wont active sync with my computer. I can only mount it. Any help would be amazing at this point. I have been troubleshooting this brick for the past 5 hours..
Thanks in advance for any help
Click to expand...
Click to collapse
Did you try to reflash Magldr again, CWM recovery, then Android Rom again?

would i be able to do that without my phone syncing with the comp?

I tried it and it booted to CWM recovery

Gunblade77 said:
would i be able to do that without my phone syncing with the comp?
Click to expand...
Click to collapse
Yes, u should flash magldr 1.13, not magldr 1.11 because it will give stuck at GoGoGo. U need to enter bootloader to flash magldr 1.13.
Edit:sorry my bad. 1.11 wont give u stuck at gogogo, but flash 1.13 this time.

Do you actually know what you're doing? Your phone is most certainly not bricked. WMDC is useless once you don't have WinMo on your phone. I think the problem is your radio. Download and flash the 2.15.50.14 radio. It's the newest one. Then flash away and it should work. If not, task 29, reflash MAGLDR and then flash your ROM from clockwork.
Sent from my HTC Vision using XDA App

Ok i got the new mglrd and radio.. now when you tell me to flash the rom from cwm.. you mean from zip right?

ok so I installed from zip and the phone booted up into CWM yet again. Telling me that it failed to find cache/recovery/command, cache/recovery/log.
Failed to find cache partition to mount to cache.
I did update the radio and mglrd like you said.

I had the same problem I task 29'd it then flashed the build via splash mode
Sent from my HTC HD2 using XDA App

Just do the following
Below was taken from Tyween "TyphooN CyanogenMod 7 RC2+ v2.8.0"
1. Task 29
2. Flash Radio(2.15 Recommended)
3. MAGLDR 1.13
4. ClockworkMod Recovery v1.3 135M System/44M Cache/Recovery v3.0.1.9
5. Install TyphooN CyanogenMod 7 .zip with CWM

What i would do is download a stock rom, it will probably come as a single .exe file. rename the extension from .exe to .7z (if you have 7zip, im sure u can name it to what ever archieve program u have) then extract it. find the signed.nbh file and extract that. Then rename LEOIMG.nbh and put on root of sd card. power off phone and while booting hold the volume down button and the power button till you get the bootloader screen... follow prompts and then you are back to a stock hd2

I got it running now thanks for all the help guys. I just flashed a stock rom and changed the radio.
Sent from my HTC HD2 using XDA App

i think its needed to have a 2gb partition for ur sd xard befare install a rom.. partiton ur sdcard with cwm..
Sent from my HTC HD2 using XDA Premium App

Gunblade77 said:
I got it running now thanks for all the help guys. I just flashed a stock rom and changed the radio.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA Premium App

try this:
1) ensure you have magldr 1.13 loaded
2) boot into CWM
3) Do a wipe
4) re-download the ROM zip file (you could have gotten it corrupted somehow on the download)
5) put it on your SD card, load up CWM, flash choose.zip and find your ROM
6) after the flash do another wipe on CWM
7) restart your phone and from magldr load android from nand
edit: lol nvm, apparently I didn't see there was a page 2. Good job on gettin it running

orangekid said:
try this:
1) ensure you have magldr 1.13 loaded
2) boot into CWM
3) Do a wipe
4) re-download the ROM zip file (you could have gotten it corrupted somehow on the download)
5) put it on your SD card, load up CWM, flash choose.zip and find your ROM
6) after the flash do another wipe on CWM
7) restart your phone and from magldr load android from nand
edit: lol nvm, apparently I didn't see there was a page 2. Good job on gettin it running
Click to expand...
Click to collapse
lol thank you this would have helped also

JohnnyVolcom5 said:
What i would do is download a stock rom, it will probably come as a single .exe file. rename the extension from .exe to .7z (if you have 7zip, im sure u can name it to what ever archieve program u have) then extract it. find the signed.nbh file and extract that. Then rename LEOIMG.nbh and put on root of sd card. power off phone and while booting hold the volume down button and the power button till you get the bootloader screen... follow prompts and then you are back to a stock hd2
Click to expand...
Click to collapse
you're really telling him to go back to full stock, with stock spl, that's not necessary, if he has hardspl already, he doesn't have to go thru that again, task 29 will remove all traces causing issues, so all he needs is task 29, radio 2.15.50.14, MGLDR, CWM with the proper partition, and flash desired rom from clockwork.

HyperDroid-CM7-v5.3.0[a2sd][CyanogenMod7 LEO 2.3.7]-error

hii
when im trying to install HyperDroid-CM7-v5.3.0[a2sd][CyanogenMod7 LEO 2.3.7]
i got karnel boot failed error
and i returning to magdlr main menu
anyone ??

Did you make a proper CWM partition?
Are you sure that you have downloaded MAGLDR version, and not cLK version?
If you already had Some Android ROM, did you preform wipe data/cache/dalvik?

first of all thank you for the comment
second i dont know exactly what it is CWM
i was installed the magdlr 1.13
after it i was checkd at the boot screen (red green white)
there is hspl 2.08
after it i was removed the dalvik and wipe my device
i was installed the 2.2 rom
and after it 2.3.4 nexos one
i all so used the hd2 tool kit becuase i got error message when i tried to enter to the ad recovry mode
mmm thats all my action

ohadvaser said:
first of all thank you for the comment
second i dont know exactly what it is CWM
i was installed the magdlr 1.13
after it i was checkd at the boot screen (red green white)
there is hspl 2.08
after it i was removed the dalvik and wipe my device
i was installed the 2.2 rom
and after it 2.3.4 nexos one
i all so used the hd2 tool kit becuase i got error message when i tried to enter to the ad recovry mode
mmm thats all my action
Click to expand...
Click to collapse
From your description, this is what you need to flash http://hyperdroid.calibur.info/index.php?file=ca87c22421707cb913ffc939eafd6def. This is the MAGLDR version. You will get kernel error when you flash the wrong version

sorry
could you plz explain me what is the problem and what i need to do
im a new android user

ohadvaser said:
sorry
could you plz explain me what is the problem and what i need to do
im a new android user
Click to expand...
Click to collapse
It would be easier if you list what you have done. That way we can help fill in the missing part.
Question:
1. You do have MAGLDR installed?
2. Have you installed cwr (clockwork recovery)? Remember Hyperdroid rom required 150/5 partition in cwr.
You can do both with the HD2 Toolkit posted in HD2 forum.
For MAGLDR 1.13, booting from NAND:
Download the file attached
Download a partition layout incl. recovery from this thread which fits your ROM you want to use best and unzip it into "C:\recovery" for example
Copy over the recovery image file from inside the zip archive into this folder "C:\recovery", delete existing "recovery-raw.img" and rename copied image file to "recovery-raw.img"
Flash the recovery and partition layout using "DAF.exe" as usual and described in the thread of raiderx or the ROM provider
Boot Recovery with menu point "8. AD Recovery"
You're done

ok
how can i know if the magdlr ot clockwork mod is installed
?

again im very sorry
i need to change someting in the htc hd2 tool kit
in the magdlr left side
or in the right side
and what about the cache amount ?

Boot problem or something

hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?

tsagas said:
hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?
Click to expand...
Click to collapse
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM

Have you Installed CWM recovery ?

Nigeldg said:
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM
Click to expand...
Click to collapse
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?

tsagas said:
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?
Click to expand...
Click to collapse
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version

tsagas said:
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version
Click to expand...
Click to collapse
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels

tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Dont worry man, once you install CWM, you will be able to install a NAND rom of your choice on the internal memory of your phone. The rom you install will have everything eg. kernels, scripts. Basically all you need to do is install CWM then install a rom of your choice. Here is a guide to do install clockworkmod(CWM)
http://www.addictivetips.com/mobile...kmod-recovery-on-android-htc-hd2-with-magldr/
and here is how to install a rom using clockworkmod
1. turn off you phone
2. turn it on while keeping the power button pressed (dont let go until you see the MAGLDR menu)
3. Go to option 8 "AD recovery"
4. You will boot into clockworkmod
5. Go to mounts and storage
6. Mount the sd card(connect your phone to the pc via usb cable, and then select this option)
7. Place your downloaded rom .zip file on the sd card, root level
8. unmount your fone.
9. Go to "install zip from sd card option"
10. then select "choose zip from sd card"
11. Select the rom.
12. The rom will be installed on your fones internal memory.
13. When it is done, just reboot your phone.
14. ENJOY
NOTE: Remember to choose the correct partition size when selecting which clockworkmod to install. there are 150mb, 250mb and 400mb partitions available. The procedure to install them is the same.
Hope it helps.
any questions
Give me a thanks if you found this post useful

tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.

Nigeldg said:
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.
Click to expand...
Click to collapse
Installed CWM done everything right and i still got stuck on AD Recovery GO GO GO

http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money

tsagas said:
http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money
Click to expand...
Click to collapse
I genuinely cannot make it any simpler than this guide. When it says flash the correct partition size, use the HD2 NAND Toolkit to flash a 175mb partition.

[Q]Magldr. Intall An android ROM over an other Android ROM

Hello, i have htc hd2 and i already intallled this ROM:
http://forum.xda-developers.com/showthread.php?t=1209474
Now, i want to update this ROM to this one:
http://forum.xda-developers.com/showthread.php?t=1662881
But i dont know how, i have magldr installed on my device, 2.08 spl and the proper radio. I dont really know if i first have to uninstall the current android i have(i dont know how either) or if i just flash it on top of it. Another question i have is how to flash a rom that comes on a zip file from magldr. Because i installed the android that i currently have with an .exe that came inside the rom i downloaded.
Thanks, i hope i can get this solved asap.

You don't need to uninstall your current ROM, but you have to install CWM first with the correct partition size. After that, boot into cwm by selecting option "8. AD Recovery" and then "install zip from sdcard" and choose the ROM you downloaded as a .zip .. and you should be good to go.
If you need elaboration, you can follow this tut: http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
Keep in mind you have to modify "Step 8" & "Step 10" according to your ROM.

Also, if you installed your first rom using daf.exe some time ago there's a good chance you don't have magldr 1.13.
You can tell by looking at the magldr menu screen at the top, or by looking at option 8,, if option 8 ISN'T "ad recovery" then you need to upgrade magldr. (Well, technically you don't, but its way easier if you do)

Marvlesz said:
You don't need to uninstall your current ROM, but you have to install CWM first with the correct partition size. After that, boot into cwm by selecting option "8. AD Recovery" and then "install zip from sdcard" and choose the ROM you downloaded as a .zip .. and you should be good to go.
If you need elaboration, you can follow this tut: http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
Keep in mind you have to modify "Step 8" & "Step 10" according to your ROM.
Click to expand...
Click to collapse
I installed my previous rom with daf.exe. I have to install CWM now, i have magdlr 1.13, so i can do it. But i read this:
"WARNING MESSAGES:
GOING FROM A DAF FLASHED ROM TO A RECOVERY FLASHED ROM WILL WIPE ALL DATA
IF YOU FLASH ANOTHER ROM USING DAF, RECOVERY WILL NO LONGER WORK CORRECTLY, YOU WILL NEED TO REFLASH RECOVERY"
I didnt understand what it meant with "wipe all data". Is there any chance to brake my device?
Thanks

It just means that the apps and data on your current ROM will be deleted (SD card will not be affected). You can use an app like Titanium Backup to backup your apps and app data then restore them after flashing a new ROM.

I already flashed the rom succesfully, thanks for the help

flashed but reboot failed
Flash was successfull, but first reboot failed. Phone shows the cyanoGen mod figure with an arrow turning around it for ages.
Any ideas how to make it working?
bocacapo123 said:
I already flashed the rom succesfully, thanks for the help
Click to expand...
Click to collapse

keep_touch said:
Flash was successfull, but first reboot failed. Phone shows the cyanoGen mod figure with an arrow turning around it for ages.
Any ideas how to make it working?
Click to expand...
Click to collapse
Make sure you setup your partition perfectly as the OP said for your ROM,if u new on this just grabed HD2 Toolkit,try to start all over again.
but if you have settle up your partition perfectly try to go to recovery wipe cache,than wipe dalvik cache and reboot,see if this working,good luck
Long Live HD2,Long Live Rock'n Roll!!

maglder problem

hi
i'm new to android and to xda, my first experience was with NexusHD2-Gingerbread V3.3a native sd, i read about flash zip files from recovery to update the rom, i go to ad recovery and found nothing there, so i instal MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M, and flash update as i want, but now i can't boot automaticly to nexus, its stop on maglder menu and load after choose boot adsd , any idea to make it boot normally ?

e_m_e2000 said:
hi
i'm new to android and to xda, my first experience was with NexusHD2-Gingerbread V3.3a native sd, i read about flash zip files from recovery to update the rom, i go to ad recovery and found nothing there, so i instal MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M, and flash update as i want, but now i can't boot automaticly to nexus, its stop on maglder menu and load after choose boot adsd , any idea to make it boot normally ?
Click to expand...
Click to collapse
if i re install magldr it will replace the missing file or what ?
i need your advice please:
how can i avoid like this problem ?

use hd2 toolkit. repartition phone using it, it will automatically install recovery so you can use ad recovery in magldr.
search for hd2 toolkit

gilbert32 said:
use hd2 toolkit. repartition phone using it, it will automatically install recovery so you can use ad recovery in magldr.
search for hd2 toolkit
Click to expand...
Click to collapse
thanks for your reply gibert32
i already using hd2 tookit to wipe and flash magldr, but i don't partition my phone.
i install Rom using native SD, so i make two partition on my SD card, using (recovery_4EXT2.2.7_leo_sd) to do that.
but i install ( MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M ) to update my Rom.
did you mean that if i install recovery i partition phone ?

for nand install: in hd2 toolkit, you just choose partition size for magldr, click repartition and toolkit will repartition AND install recovery.

another problem
gilbert32 said:
for nand install: in hd2 toolkit, you just choose partition size for magldr, click repartition and toolkit will repartition AND install recovery.
Click to expand...
Click to collapse
Dear gilbert
i use ( NexusHD2-Gingerbread V3.3a )native SD, it is so stable and fast Rom, but it can't read arabic language
it seems like that ( ا ل س ل ا م ع ل ي ك م )
it must be ( السلام عليكم )
Rom link :
https://sites.google.com/site/nexushd2android/nexushd2-gingerbread/v3-3
i try tytung add on : RTL_farsi_arabic_support_NexusHD2_V3.2a_ByTamer-signed.zip
i don't know if i install this Rom on nand and flash this add on solve my problem ?
but still have the same problem.
can you please help me to solve this problem

e_m_e2000 said:
Dear gilbert
i use ( NexusHD2-Gingerbread V3.3a )native SD, it is so stable and fast Rom, but it can't read arabic language
it seems like that ( ا ل س ل ا م ع ل ي ك م )
it must be ( السلام عليكم )
Rom link :
https://sites.google.com/site/nexushd2android/nexushd2-gingerbread/v3-3
i try tytung add on : RTL_farsi_arabic_support_NexusHD2_V3.2a_ByTamer-signed.zip
i don't know if i install this Rom on nand and flash this add on solve my problem ?
but still have the same problem.
can you please help me to solve this problem
Click to expand...
Click to collapse
i will upload the patch for nativeSD. just wait. modifying and testing... @e_m_e2000 EDIT: finished. i tested and it worked. please try it

you are the best
gilbert32 said:
i will upload the patch for nativeSD. just wait. modifying and testing... @e_m_e2000 EDIT: finished. i tested and it worked. please try it
Click to expand...
Click to collapse
Mr.gilbert thanks so much for your help, your patch works for me and now i can read Arabic will:laugh:
but i think i make somthing mistake, as my mobile can't boot automatically, it give me nand kernal open faild , its happen when i flash CWM_Recovery_v3.2.0.0_for_NexusHD2 .
i used 4EXT recovery to flash rom,when i need to flash any zip file for update ( your great patch ) i go to ad recovery but nothing there ?
my question now: how can i flash zip file while using native SD Rom ?
thanks again for your help

e_m_e2000 said:
Mr.gilbert thanks so much for your help, your patch works for me and now i can read Arabic will:laugh:
but i think i make somthing mistake, as my mobile can't boot automatically, it give me nand kernal open faild , its happen when i flash CWM_Recovery_v3.2.0.0_for_NexusHD2 .
i used 4EXT recovery to flash rom,when i need to flash any zip file for update ( your great patch ) i go to ad recovery but nothing there ?
my question now: how can i flash zip file while using native SD Rom ?
thanks again for your help
Click to expand...
Click to collapse
well, nand kernel open failed is because you don't have nand android. just in magldr find the setting to choose ad sd as default os. then reboot should work correctly.
you can't flash zips in roms. this is why they are flashed from recovery. if ad recovery shows nothing, then recovery is not correctly installed. partition your phone with hd2 toolkit and ad recovery should work.
btw, this is not "my" patch. it's the same patch tytung has in the rom's OP, but i only modded it to work on nativeSD. and the first time i tried it i accidently deleted the rom from my phone

gilbert32 said:
well, nand kernel open failed is because you don't have nand android. just in magldr find the setting to choose ad sd as default os. then reboot should work correctly.
you can't flash zips in roms. this is why they are flashed from recovery. if ad recovery shows nothing, then recovery is not correctly installed. partition your phone with hd2 toolkit and ad recovery should work.
btw, this is not "my" patch. it's the same patch tytung has in the rom's OP, but i only modded it to work on nativeSD. and the first time i tried it i accidently deleted the rom from my phone
Click to expand...
Click to collapse
thanks for your help
it means that when i flash ( MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M ) to flash zip file i was right ?
is cwm recovery partition my phone automatically ?
sorry for my bad experience, why i partition my phone while running native SD ?

you don't need to just boot via sd in magldr the recovery (4ext) and flash nativeSD rom to nativeSD and boot rom from ad sd too. there's no need to partition your phone

gilbert32 said:
you don't need to just boot via sd in magldr the recovery (4ext) and flash nativeSD rom to nativeSD and boot rom from ad sd too. there's no need to partition your phone
Click to expand...
Click to collapse
Mr gilbert
i format my SD card and make 2 partition ( fat32 + EXT4) and copy 4EXT recovery to my SD, used took it to wipe - flash maglder and Rom, No problem at all, but when i try to flash zip file such as arabic patch, restart my phone - magldr menu - ad recovery ..... nothing load
where is the problem ?

@e_m_e2000 omg. just go to settings in magldr, set ad sd location to 4ext recovery. now boot ad sd. it will boot 4ext recovery. use THIS recovery to flash any zip to native sd, because you haven't partitionned your phone and DON"T have AD RECOVERY. so ad recovery will not work UNLESS you repartition using hd2 toolbox.
just boot 4ext with ad sd menu, flash the fix and reboot. in magldr re-set ad sd back to nativeSD folder to boot the rom.
each time you want to flash a zip, you must use 4ext recovery. ad recovery cannot work without partitionning

gilbert32 said:
@e_m_e2000 omg. just go to settings in magldr, set ad sd location to 4ext recovery. now boot ad sd. it will boot 4ext recovery. use THIS recovery to flash any zip to native sd, because you haven't partitionned your phone and DON"T have AD RECOVERY. so ad recovery will not work UNLESS you repartition using hd2 toolbox.
just boot 4ext with ad sd menu, flash the fix and reboot. in magldr re-set ad sd back to nativeSD folder to boot the rom.
each time you want to flash a zip, you must use 4ext recovery. ad recovery cannot work without partitionning
Click to expand...
Click to collapse
thank you very much, sorry for my bad experience
after i flash cwm i can flash any zip file, you advise me to leave that or re flash that Rom and follow your steps for flash Arabic patch

well you can install an android rom after repartitionning on your phone.
if you repartition, you will be able to use ad recovery instead of 4ext recovery on sd.
if you repartition, booting ad sd will boot your rom. no need to reflash it or the fix.
you can after repartitionning install this rom using dataonext, your apps and settings should be preserved, but you will need to reflash the ORIGINAL arabic patch, not the one i provided for nativeSD

gilbert32 said:
well you can install an android rom after repartitionning on your phone.
if you repartition, you will be able to use ad recovery instead of 4ext recovery on sd.
if you repartition, booting ad sd will boot your rom. no need to reflash it or the fix.
you can after repartitionning install this rom using dataonext, your apps and settings should be preserved, but you will need to reflash the ORIGINAL arabic patch, not the one i provided for nativeSD
Click to expand...
Click to collapse
thank you, Great man