my phone is showing charging without the power cord and when i powered down it shows the battery charge icon. ican only turn on with cord attached. what happened and what can i do.
Sent from my SCH-R720 using xda app-developers app
Related
When I plug the charger cable to my streak the only thing that happens is the three led lights turn on. When I try to turn on the streak with the cable still in all that shows up is 0% battery life so I took out the battery and turned it on with the charger attached and an exclamation mark shows up which tells me that the cable isn't faulty. Anybody have any ideas?
-Thanks in advance
I have issues too regarding that , my usb and car charger wont charge my phone when its dead i have to use the wall outlet , i was reading a thread the other day that was from august and if u remove that batt then put it back in then plug the usb in the cp then the phone it will start up , i actualy got my phone to start by following it but who knows why though,could just be a loose phone connector
Sent From My Rooted Dell Streak Using Xda App
Its a fault that most streaks have when the battery has been run flat,
Sent from my Dell Streak using XDA App
mymytouch 4g will not charge the led does not blink, tried to disconnect reconnect, leave battery out put it in, no avail. is my phone toast? or will a new battery fix the problem. the connecter doesnt seem to be broken. on the usb
freshkid87 said:
mymytouch 4g will not charge the led does not blink, tried to disconnect reconnect, leave battery out put it in, no avail. is my phone toast? or will a new battery fix the problem. the connecter doesnt seem to be broken. on the usb
Click to expand...
Click to collapse
Try a new cord?
Sent from my Dark JellyBellyG1 using xda app-developers app
My Nexus 7 was working fine up until yesterday. I hooked it up to my iMac at work and copied the latest version of the rom I use, flashed and everything seemed good. I noticed that last night the N7 didn't charge and the battery was really low, so I plugged it into my charger.
--Nothing--
Hooked it up to my computer
--Nothing--
Strange thing is, if I shut it down and leave it off, it detects the charger being plugged in and appears to be charging. Also, my OTG cable seems to be working fine. I hooked up my Xbox 360 wireless adapter and was able to pair and use it with my computer. I've tried wiping and re-flashing, restoring from backup, all results are the same.
Can someone give me some insight?
It seems the battery is really low. Try to use the stock charger since it has higher current to charge
Doesn't matter what charger I'm using. If android is RUNNING, it will not charge not do any USB operations (except OTG) I can't read it on the computer, charge it off the computer, charge it off any USB charger including the stock one, adb to it, fastboot to it. But if I shut it down, it will charge when it's completely turned off.
It's charging same thing happened to me when I turned it on for the first time. After putting it on for some time remove it and after some time it turned on with full charge..
In my case i Don't know why it didn't turned on just after the charging..
Sent from my GT-I9100 using xda app-developers app
Again my device not turning on....I did a factory data reset and boom its dead again. today I will sent it for replacement
Sent from my GT-I9100 using xda app-developers app
Hello All,
I've had my razr m for a bit now, unlocked bootloader, and was running a CM 10.1 release on it for a while. I wiped it, and installed CM 10.2 nightly (10-2 build i think) - i knew i had to potential to blow up my phone. Was using the for almost 2 weeks, then I went back to my parents house and had my phone hooked up to i guess what was a cheap china wall wart with the microusb cable already built in. it got kind of hot then turned off, i unplugged my phone from the wall and put it on the floor in the garage. i tried to turn it on a couple hours later, no dice. now when i hook it up to anything (only using legit chargers and a PC that can be sacrificed) the led just stays on green, but the phone doesn't even turn on...
any advice?
tl;dr
i hooked my phone up to a cheap china wall wart after upgrading the rom and using the rom for 2 weeks.
now the phone doesn't turn on.
thanks
IMO it sounds like the battery or the charging circuit is fried... normally when the led stays on and green its telling you that the battery is completely dead and will remain that way until the charge level reaches 4-5% then it will boot to the charging screen... I would plug it into a Motorola wall charger for a half hour to an hour if after that time the phone still won't power on I'd pick get a factory cable/adaptor if that brought it to fast boot I'd flash stock and attempt to charge again...if it wouldn't charge i would find a battery somewhere...
Sent from my XT907 using xda app-developers app
i don't have a factory cable, but i do have an extra battery...
i am trying the battery now.... if that doesnt work any thing else?
i've made a factory cable, do i need to have the battery connect when using this cable?
ezknives said:
IMO it sounds like the battery or the charging circuit is fried... normally when the led stays on and green its telling you that the battery is completely dead and will remain that way until the charge level reaches 4-5% then it will boot to the charging screen... I would plug it into a Motorola wall charger for a half hour to an hour if after that time the phone still won't power on I'd pick get a factory cable/adaptor if that brought it to fast boot I'd flash stock and attempt to charge again...if it wouldn't charge i would find a battery somewhere...
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
I always have... I'm sure you don't need to have it connected as it bypasses it...
Sent from my XT907 using xda app-developers app
so i noticed that the LED only stays on green for like 5 to 10 minutes then turns off.
i have a second battery that when its connected the LED on the phone doesn't even turn on.
Hmmm.... can you get into fast boot mode with the factory cable you made?I'm guessing you found the walk through on how to make them did you make it correct solder points solid and getting +5v off pin 4...when plunged in (to charger) do you get a response from holding volume down and power....
Sent from my XT907 using xda app-developers app
ngdwfu
nope, doesn't even seem to turn on.... i have a 100% new battery on the way, i am going to try to replace it, there is a chance the other battery i had hanging out was bad. I also am making a new factory cable using the microB plug from sparkFun. as a note i might have my friend make a new case for the phone for me that has a removable back.
ezknives said:
Hmmm.... can you get into fast boot mode with the factory cable you made?I'm guessing you found the walk through on how to make them did you make it correct solder points solid and getting +5v off pin 4...when plunged in (to charger) do you get a response from holding volume down and power....
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
so i got all the goodies in and hooked up the factory cable to my phone, no love from windows (ie doesn't detect the phone)
any ideas?
i know the cable is good, i have another phone that i have check it with.
i also have a board from my old xt907 (which i broke by throwing), and when i connect the factory cable to it, windows seems to think its there.
so the board for the phone that was hooked to the cheap china charger i think is 100% dead... when i hook it up to my machine with the factory cable nothing shows up.
the other board that i have has some qualcomm usb serial port show up....
any ideas on what i can try for the dead board to try to bring it to life? there is still some data i want of the damned thing....
I have a WM-8880-MID (TWD_ MID7_8335C_ SD_ GSL_ 1680) Tablet which can not be used unless I connect the charger. If I disconnect the charger it will automatically shutdown after few seconds.
Also battery information screen show nothing about battery life (it shows" ---" ). when charger is connected the icon shows about 99% charged.
What a should I do?
Sent from my GT-I9300 using xda app-developers app