So the tablet had a bit of an accident where the power button broke off on the inside. I went to go solder the piece back on and accidentally burnt off one of the contacts on the board so now the power button won't work. Is there anyway I can recover the data from the internal SD card?
Take a look at this. There are many other ways to make the repair, but these are nice, and you should be able to resolder once applied.
U.S.
http://www.ebay.com/itm/MG-Chemical...197?pt=LH_DefaultDomain_0&hash=item43ae4341e5
U.K.
http://www.ebay.com/itm/Conductive-...985?pt=LH_DefaultDomain_3&hash=item5ae72b24b9
I'll have to see if I can find that here. Is there any way to recover the data without having to do repairs?
Omega2513 said:
I'll have to see if I can find that here. Is there any way to recover the data without having to do repairs?
Click to expand...
Click to collapse
The information, is stored on flash rom, which are probably perm attached to the MainBoard as with most things these days. Nothing that can be removed or popped into a card reader.
Not like in a PC, or an older device that used an eeprom. Of course you would have to have an eeprom reader to access it. But usually these were programmed at base level.
You should probably just send it in for repair. Chances are, they won't bother to look what's on your tab. Then again, if repair is in the US, Department of Homeland Security dictates all electronic repair facilities copy and send all information from all electronic devices turned in for service. There's always that chance.
50/50 chance they will send your tab back with all info.
It's not worth it, There is also damage to both cameras and the sd card slot. I was able to get a 16gb A501 online for $225, I just wanted some of the data that I had stored on the old one. I'll try and get the repair tool to fix it but I won't spend much money to repair it.
Well you can send the broken one to me and Ill be glad to mess with it, I need an extra one to tear apart , if you dont want it , dont throw it out!
Vintage144 said:
Well you can send the broken one to me and Ill be glad to mess with it, I need an extra one to tear apart , if you dont want it , dont throw it out!
Click to expand...
Click to collapse
You have an island of misfit tabs
Vintage144 said:
Well you can send the broken one to me and Ill be glad to mess with it, I need an extra one to tear apart , if you dont want it , dont throw it out!
Click to expand...
Click to collapse
Haha. I plan on attempting to repair this one. I want those files on there and IF I get it working, the wife can use it for her business. I checked the price on ebay just for that board piece, its half the cost of a new tablet.
no I wish I did MD , it would be fun playing with them, all I have right now is a HPJornada 680 , paid a buck for it and it works , only problem was it used a a port similiar to a USB (but it isnt usb) ,so I soldered a new port to it (usb) and it works (sort of) gotta figure out how to add the usb to CE , other than that for a touch screen built in the 90's it aint bad ,but CE is real limited!
Related
Hi,
Broke my screen a couple of days ago. I have a lot of information and programs installed on my universal and dont want to install everything again.
I have therefore bought a used universal and I wonder If I will be able to replace the screen + frame without hardresetting the unit. I have downloaded the service manual but I couldnt find any info regarding that. If any one have any useful tips on replacing screen + frame plaese let me know. Do I have to take the phone apart or is it possible to replace screen and frame only by loosing the screen by the hinge?
Is this a difficult task, (looks easy in the manual)?
Thanks in advance,
Miki
Just need the right tools. Not too difficult and you need an antistatic arm band. Goodluck! How bout selling me your extra mainboard?
first post here but i just found the site.
I broke the screen on my o2xda exec and took it too my local Carphone Warehouse. I am not one of their customers anymore but they looked the repiar up on their system and it showed that the repair cost was going to be £40. I authorised repair and got a written copy of the cost and confirmed the cost about 10 times as i didnt belive him. The phone went off to HTC's repair centre and came back three weeks later with a new screen and a complete upgraded rom. I paid £40 job done.
Might be worth a try if you have one near you.
No prob.
All parts will be for sale as soon as Im ready.
Is it possible to switch screen with frame without hardreseting?
And is it possible to switch screen without taking the phone apart?
/Miki
There is a way to just open up the just screen part of the clamshell but you risk breaking your flex cable but it can be done if you are really careful. I dont recommend doing it this way though.
I suggest you follow the instructions as per manual by opening up the keyboard part first and then clamshell then replacing the screen. It's not too difficult. Don't forget the anti-static thing so you don't mess up the mainboard.
Also, you don't have to hardreset to replace your screen..dont forget the anti-static thing!
Please reserve the mainboard for me...Thanks!
I wouldnt mind the flex cable!
Its easiest to leave this in the plastic housing, thus most of the actual shell (top lid, hinge, bottom keyboard housing part etc.
Let me know if you have this spare as my touchscreen doesnt work now and im desperate!
I'd be interested in the camera flash (flashlight)
IF/when you're ready to part out the remainder of your device, I'm in desperate need of a replacement camera flash (flashlight).
-Kevin.
Please let us know how your replacement went. Still would like to purchase that MB from you.
I have a mac
I use a mac, what software can i use inorder to syncronise my Xda.I dont know what to do as i can't save my files onto my computer or download any music on to my phone...
BYJO said:
I use a mac, what software can i use inorder to syncronise my Xda.I dont know what to do as i can't save my files onto my computer or download any music on to my phone...
Click to expand...
Click to collapse
http://markspace.com
yo, check this out! that's how to change your screen!
I've done it twice, allready! ;-)
http://www.smartphonefrance.info/jasjar.asp
'hope this'll help you guyz
you'll only need a small torx screwdriver (like the one all cell phones use), a small " X " screwdriver, a small flat screwdriver and a whole bag of skills ;-)
nice link!
Selling parts?
So will you be selling the parts? Interested in your extra mainboard. You can email me at clemsynatcharterdotnet.
Thanks
Sorry for the delay.
The screen replacment worked without any problem.
If any of you still are intrested in parts, let me know.
/Miki
Hi,.
I want to replace my screen too (only the LCD)...
can some one advice me how to? Do I need to take the whole device appart, or only the screen?
ragards
A.
Well ladies and jerks, I regret to inform you that my MDA is completely dead. I was in a car accident the other day and it went flying through the air and when I grabbed it off the floor of my car the USB charge plug was loose and had trouble connecting to the computer but still worked. Since then I had put a drop of super glue in there to hold the plug still and everything was fine untill this morning. My phone was left off with no battery in it untill the glue dried and still, everything was fine.
Now this morning when I went to grab my phone it was completely frozen and had 1% of battery life left so I soft reset and plugged the phone in and it was charging fine. I connected it to the computer and it would not connect at all. Now after playing with the cable a bit to get it to connect to the computer, the charge port is completely dead. It will not even let it charge with the charger and the little silver piece inside the plug is falling out.
Does anyone here have any idea what I should do to save my Wizard? I fear it may be the end for it.
Here's the big problem though. My device is CID unlocked and still has the TNT.1437 firmware on it so my warrenty is completely void. T-Mobile will not send me a handset exchange like this.
hi
t-mobile wouldn't send you a warranty replacement even if you had the official windows mobile on it. that is because, after you read the terms and conditions of the warranty, it does not include and in fact states quite clearly that 'excessive' use of the usb cable resulting in damaged charging port will not be replaced.
i realise this is not very helpful, so allow me to be helpful!
download the wizard service manual, if you PM me your email address i can email you a copy of one
what you will have to do is first obtain a new mini usb port from ebay or somewhere similar, i will try to hunt one down in america for you
following the service manual, you need to dismantle your handset, use some sort of rubbing alcohol (nail varnish remover) to get rid of the super glue you put on, first try to re-solder the old connector back onto where it came, or if not solder on the new one after removing the old one.
to be honest, you dont have anything to lose, but you could gain a working mda again!
good luck, and just a disclaimer to say im not responsible for any damage done to yourself, your device or anything else.
duke_stix said:
hi
t-mobile wouldn't send you a warranty replacement even if you had the official windows mobile on it. that is because, after you read the terms and conditions of the warranty, it does not include and in fact states quite clearly that 'excessive' use of the usb cable resulting in damaged charging port will not be replaced.
i realise this is not very helpful, so allow me to be helpful!
download the wizard service manual, if you PM me your email address i can email you a copy of one
what you will have to do is first obtain a new mini usb port from ebay or somewhere similar, i will try to hunt one down in america for you
following the service manual, you need to dismantle your handset, use some sort of rubbing alcohol (nail varnish remover) to get rid of the super glue you put on, first try to re-solder the old connector back onto where it came, or if not solder on the new one after removing the old one.
to be honest, you dont have anything to lose, but you could gain a working mda again!
good luck, and just a disclaimer to say im not responsible for any damage done to yourself, your device or anything else.
Click to expand...
Click to collapse
I sent you a PM with my email
dharvey
hi
so sry to hear about ur accident and damaged MDA
t-mobile will certainly wont give u warranty replacement. It happened with me once also and only way out was ,I took it to a mobile repair shop and got the usb connector replaced for very nominal price.
duke_stix is right,get a mini usb and solder it. If u can do it,very well or take it to a techy to do it properly.
Once it's repaired it will be as good as new,goodluck
duke_stix said:
hi
t-mobile wouldn't send you a warranty replacement even if you had the official windows mobile on it. that is because, after you read the terms and conditions of the warranty, it does not include and in fact states quite clearly that 'excessive' use of the usb cable resulting in damaged charging port will not be replaced.
i realise this is not very helpful, so allow me to be helpful!
download the wizard service manual, if you PM me your email address i can email you a copy of one
what you will have to do is first obtain a new mini usb port from ebay or somewhere similar, i will try to hunt one down in america for you
following the service manual, you need to dismantle your handset, use some sort of rubbing alcohol (nail varnish remover) to get rid of the super glue you put on, first try to re-solder the old connector back onto where it came, or if not solder on the new one after removing the old one.
to be honest, you dont have anything to lose, but you could gain a working mda again!
good luck, and just a disclaimer to say im not responsible for any damage done to yourself, your device or anything else.
Click to expand...
Click to collapse
Good advice except don't use rubbing alcohol, it damages plastic. Use adhesive remover instead. (At my hospital we use little adhesive remover wipes similar to the alcohol prep pads.) We are told to use this method when cleaning adhesives from plastics and it works.
duke_stix said:
hi
t-mobile wouldn't send you a warranty replacement even if you had the official windows mobile on it. that is because, after you read the terms and conditions of the warranty, it does not include and in fact states quite clearly that 'excessive' use of the usb cable resulting in damaged charging port will not be replaced.
i realise this is not very helpful, so allow me to be helpful!
download the wizard service manual, if you PM me your email address i can email you a copy of one
what you will have to do is first obtain a new mini usb port from ebay or somewhere similar, i will try to hunt one down in america for you
following the service manual, you need to dismantle your handset, use some sort of rubbing alcohol (nail varnish remover) to get rid of the super glue you put on, first try to re-solder the old connector back onto where it came, or if not solder on the new one after removing the old one.
to be honest, you dont have anything to lose, but you could gain a working mda again!
good luck, and just a disclaimer to say im not responsible for any damage done to yourself, your device or anything else.
Click to expand...
Click to collapse
Thanks. Have you had any luck trying to find a service manual? I have been looking but with no success...
Well I managed to find a wizard service manual written in English for the US and got my MDA taken apart correctly without damaging it(I hope) only to find that all 9 contacts for the USB port are completely severed. Unfortunately I don't have the soldering skills to fix this on my own and there are no local repair shops where I can get it fixed seeing as how I am also out of a car...(see first post) so I am back to a Razr... UGH.... Anyways, I will remain an active member of the community and continue to help others with issues they may be having and help others flash roms because I found that I enjoy helping others.
I will, however, be leaving for a period of time in a few months because I am being deployed and most likely will not be returning with a Wizard but an HTC TyTN II. Don't worry though, I won't forget my friends back here in the Wizard forum( I know too much about these things to just pack up and leave now...)
Hi
sry to hear that,
But just another idea popped in my mind,if u can manage to get mini usb port than u can take it to any electronics repair shop, like tv,radio or any pc repair shop,it can be soldered,since u say u have the service manual u can show them the circuit layout,they can fix it.
yet,if u happen to have any sort or make of mobile (Motorolla,Nokia,samsung) which is pretty old and spent,of which u got no use,c if it has a mini usb port,usually every mobile does have it,and it has 9 connectors,take it out and get it soldered to ur mda.
Well, since its gonner,there's no harn in trying,
zabardast_1 said:
Hi
sry to hear that,
But just another idea popped in my mind,if u can manage to get mini usb port than u can take it to any electronics repair shop, like tv,radio or any pc repair shop,it can be soldered,since u say u have the service manual u can show them the circuit layout,they can fix it.
yet,if u happen to have any sort or make of mobile (Motorolla,Nokia,samsung) which is pretty old and spent,of which u got no use,c if it has a mini usb port,usually every mobile does have it,and it has 9 connectors,take it out and get it soldered to ur mda.
Well, since its gonner,there's no harn in trying,
Click to expand...
Click to collapse
Thats a good idea, but I will probably just end up buying a new one off ebay for my girlfriend and play with hers all the time and then I already bought a TyTN II for myself.
Thanks.
So how about that manual??
That would be Sweeeet !!
[email protected]
Thanks for any consideration this may get :thumbsup:
TainT said:
So how about that manual??
That would be Sweeeet !!
[email protected]
Thanks for any consideration this may get :thumbsup:
Click to expand...
Click to collapse
Here is a download link. I just uploaded it.
http://www.megaupload.com/?d=BEG0XKM8
and a mirror:
http://www.megaupload.com/?d=E11DVNQC
What a resource
The links an awesome asset, Im sure peepz will be benefiting for years thanks to you.
Thank You Sir...
dharvey4651 said:
Well I managed to find a wizard service manual written in English for the US and got my MDA taken apart correctly without damaging it(I hope) only to find that all 9 contacts for the USB port are completely severed. Unfortunately I don't have the soldering skills to fix this on my own and there are no local repair shops where I can get it fixed seeing as how I am also out of a car...(see first post) so I am back to a Razr... UGH.... Anyways, I will remain an active member of the community and continue to help others with issues they may be having and help others flash roms because I found that I enjoy helping others.
I will, however, be leaving for a period of time in a few months because I am being deployed and most likely will not be returning with a Wizard but an HTC TyTN II. Don't worry though, I won't forget my friends back here in the Wizard forum( I know too much about these things to just pack up and leave now...)
Click to expand...
Click to collapse
First and Foremost,
Thank you sir, for answering the call of your nation. This American & his family thanks you from the bottom of our hearts.
In my ancestral culture's view, a patriot is second only to Saints & the Lord himself. May God watch over you & your team members.
I HAD to tell you that because every serviceman needs to know just how much Americans honor and cherish you!!!
(NEVER pay attention to the liberal media, they are sick diseased haters & hypocrites who are lucky to live in a land where they are allowed to lambast & denegrate those who are truly honorable.)
About your wizard, there are several ways to connect electronic components these days. If an adhesive was used, forget about it. If it was truly soldered, nothing can be easier! You can do it yourself (make sure to get a bulb vacuum for removing old solder and a modern soldering gun). It is so easy, in fact, that a authorized repair facility may do it for you for cheap! And you could always mail it to them, too.
Good Luck & God Speed dharvey4651.
similar problem?
My MDA will charge fine through the USB cable, but will not sync/connect -- it's not even appearing in Device Manager.
Does anyone know if this is definitely a hardware issue, presumably involving the USB port?
Thanks in advance,
Will Stewart
it is possible, your USB cable has problem or try another PC.
If you still cannot fix, donate to me ...
My htc doesnt turn on or work or charge unless i make it really cold like putting it in the fridge or freezer for a couple of mins, then it turns on by putting in battery and sticking in usb (because my buttons have snapped the flex cable) anyways it turns on and i have this russian rom flashed by previous owner, i managed to sync it with active-sync and i clicked explore it has wierd folder names like "?????" i click delete but windows doesnt let me because it says the filename should not contain "?". Then after a couple of mins maybe 2mins the phone switches off then vibrates 7 times then sometimes loads at htc splash screen?
and to make it work again ill have to make it cold again???
some details
Its a T-Mobile Version
The phone doesnt get hot?
its running windows mobile 6.5 daltt roms
and i updated the radio to Leo_Radio_15.40.50.07U_2.12.50.02_2
I think your battery is missed up, you need to replace it with a new one. try ebay.
as for the files with weird names, if they were located in your sdcard try to run checkdisk or scandisk from your computer to fix those errors.
you might want to reflash you windows rom and format your sdcard after this to prevent it from happening again, but don't forget to backup first!
Thanks for the reply!
Thanks for the reply by the way i havent got a sd card in the phone and i really dont think its the battery problem as it charges it up fine?
i was thinking i need a new motherboard as cpu is overheating but im not sure thats why im asking!
My HD2 acted like that (needed to put in fridge to work). Sent it for repairs and they replaced the motherboard.
Cheers
Yes mainboard CPU BGA issue probably.
you might find spares on this site or try buying one with a broken screen & you will have mainboard & button parts you need plus other parts can be sold on to recover costs ...
Mister B said:
Yes mainboard CPU BGA issue probably.
you might find spares on this site or try buying one with a broken screen & you will have mainboard & button parts you need plus other parts can be sold on to recover costs ...
Click to expand...
Click to collapse
Ohh well i dint really want too spend money...
anyway what about that guide the one about thermal problems htc hd2,
would that work??
can you also tell me where i could find a motherboard thats working in the uk and could you give link please
thanks.
Please ive got no phone
ive got no phone!
please i really need help, dont leave me.........
The thread on solving the over heating problems is a thread on how to make a different heat sink for the HD2. And also heating the processor up to maybe solve the issues of the balling of the processor as the processor itself can not be removed without making the rest of the main board unusable. But the process that you must go through in that thread is not just for your average Joe to do. If you mess up you will be forced to replace the main board. So my advice to you if you are not skilled at such technical repair work is to just buy another mainboard or a HD2 you can harvest the mainboard from, oh and it needs to be a mainboard for the T-Mobile version too as that is what you have.
I have a personal theoory about why the freezer trick works. First is the obvious thing that it cools down the CPU and NAND chip and allows it to operate for a short period until it warms up again. The second is that cold makes matter shrink slightly, those causing a CPU that has lost some of the connections to the balls under it that make contact to the mainboard to temporally become reconnected.
newbie guide please
Okay I think for my last resort I'm going to do the guide in the thread but can somebody PLEASE make a super easy newbie tutorial on how to do it (I know it will take time but please),without the expensive equipment that I don't have. Could I use a lighter or a candle or what about the oven or a hair dryer anything that would be at home please.
Oh yeah who ever provides the information that works I will donate money to you! Only if it works (yes I do want my mother board back)
Too Late
I killed my cpu board *cry* phones comes on with black screen only!
badboyz777 said:
I killed my cpu board *cry* phones comes on with black screen only!
Click to expand...
Click to collapse
I have similar problem. What did you do that killed it?
Hello xda-developers forum,
I realize this has been asked before, and I've read through many threads here and elsewhere, but I'm not getting a definitive solution that works for this particular situation.
Here are the details:
Phone Model/Make: Google Nexus 4
Carrier: Wind Mobile (Canada)
Screen is cracked/broken, completely black.
USB debugging is not enabled.
Completely stock ROM, have not made any customizations to the phone.
I have adb set up on my laptop, but don't know how to proceed in terms of loading into bootloader (?) and flashing, pulling data, etc.
Mostly only need to retrieve photos and videos. Already synced with Google for contacts (but not photos, unfortunately).
If you need more information, please let me know.
Is there any way I could retrieve the photos or are the precious memories lost forever?
Thanks in advance!
I dont know what cause you that problem.
but i suggest you to install driver on the computer and with tool box install stock rom in your phone.
ScoolAir said:
I dont know what cause you that problem.
but i suggest you to install driver on the computer and with tool box install stock rom in your phone.
Click to expand...
Click to collapse
Installing stock ROM would wipe his device, if he were able to, which he obviously can't.
Tdotx said:
Quote so you'll receive email notification.
Click to expand...
Click to collapse
A new screen should work, as long as that's the only thing that's damaged. It's up to you whether it's worth the $45 for a new screen assembly or $60 for the entire front unit (less frustration and possibility of screwing up than just the screen assembly) to save the photos on your phone. Those are USD amounts - I don't know how that translates into Canadian or if shipping will be extra. Swapping screen assemblies on the Nexus 4 is actually fairly easy - especially if you buy the assembly already installed with the bezel. I've done it myself probably 20+ times trying to get mine to work (I eventually did). There's plenty of teardown guides and videos on youtube on how to do it. Get yourself a new battery while you're at it, for $20. Maybe you've already replaced your phone, but either way you can get practically a new phone for $45-80 depending on what you want to replace, or a cheap back-up (always good to have) for whatever you've replaced it with. Plus all your precious memories back.
You cannot unlock the bootloader without losing everything so your best option to restore important data is to replace the screen. The battery is glued pretty hard to a breakable piece so watch one of the YouTube videos and decide what all you want to replace. Ifixit had a good video that I used when I had to replace the logic board in mine.
Hello everyone,
I have a problem with my Samsung Galaxy S5 and I was hoping to find some help here.
When I got up this morning I unplugged my S5 from its charger. However, it was turned off which is usually not the case as I usually don't turn it off. After trying to switch it on for several times and failing with it, I asked Google for help.
What I found after some research was a hint that it might be a problem with either the battery, the charging cable or the mainboard that has been damaged/burned.
Long story short, after some testing (tried a new battery and charging cable) and going to two different repair shops, it turned out it probably is the mainboard. (I'm writing 'probably' because I don't trust those shops 100%. I left my phone at the second shop for about 2.5 hours though, for error diagnostics).
Nevertheless, what I want your help with are these three questions:
1. If there really is a problem with the mainboard, how can I find it all by myself? Is there a way to tell it apart? And is there a way of telling which (more or less) exact part/entity of the mainboard has been damaged?
2. Let's say the mainboard is damaged. Is it possible to fix it? And by fixing I don't mean to just replace the mainboard, but really fixing it. (Ofc I know it might depend on the part that has been damaged, this is why I asked Question #1).
3. Assuming there is no (feasible) way to repair that mainboard. How can I possibly save the data stored on the internal memory? Is there any Software available that can still read the storage? Or do I have to physically move the memory chip to a functioning mainboard, e.g. by soldering?
Any help is appreciated. Thank you in advance!
Eclipsian said:
Hello everyone, I have a problem with my Samsung Galaxy S5 and I was hoping to find some help here...
Click to expand...
Click to collapse
My personal opinion would be that one or both of the following may have happened.
1) Bad Charger - Chargers can go bad without any warning that resulted in your battery going dead.
2) Bad Battery - Also can just go bad suddenly or over time.
The motherboard of your device has a type of regulator that will only allow a certain amount of voltage/amperage to pass on to the battery. It's extremely rare for a proper charger to kill a motherboard (unless jumper cables were involved LOL!).
Your best bet is to replace both the battery and the charger but, this is only a suggestion/recommendation.
I wish you the best of luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Ibuprophen said:
I wish you the best of luck!
Click to expand...
Click to collapse
Thank you very much. Unfortunately using a new battery and a new charger didn't solve the problem. And my charger is still in use for my backup phone, which is a Samsung Galaxy S2, and it's still working fine.
So it appears it really narrows down to some physical damage on the board.
After some more reading I found out that professional data recovery uses eMMC adapters for their SD card slot, as eMMC is downwards compatible to MMC. Unfortunately those adapters come at a cost of 85-230$, which of course is still cheaper than paying for professional data recovery, yet too expensive for having no actual clue how it even works. I still didn't figure out what the data will look like once I get access to the memory chip. Will I have to use an android emulator to get to the data? Will I have to use some special recovery tool to read the memory? Or is the eMMC already formatted in such a way that Windows can easily read it?
Anyway, what I'll try now is the cheapest method that came to my mind: mounting the eMMC on some sort of USB stick, that I found on aliexpress for 5$+shipping (it's called "USB3.0 eMMC 153 169 U disk PCB NS1081 main controller without flash memory for recycle emmc emcp chips").
I hope this will suffice to read the memory, somehow.
Any comments on this?
Eclipsian said:
Thank you very much. Unfortunately using a new battery and a new charger didn't solve the problem. And my charger is still in use for my backup phone, which is a Samsung Galaxy S2, and it's still working fine.
So it appears it really narrows down to some physical damage on the board...
Click to expand...
Click to collapse
Unfortunately Motherboards can go bad suddenly too but, there's a few options.
Option 1) You can try buying a USB JIG from eBay for $3-5, it's a tool designed to force your device into download mode. It isn't guaranteed to work but if it does you can flash the firmware. If it doesn't then you only lose $5.
Option 2) You can see if there's a friendly and helpful individual at an official service center for your device for a JTAG service. Though it isn't guaranteed to work but, some may do it for nothing while others can charge up to $50 +/-. The fees are all individually determined by them. Some have the JTAG service there while others require it to be shipped to another shop to repair them and then ship it back to you.
Option 3) You can always purchase another compatible motherboard and put the new one in your device. This is an option you can do yourself if you're careful.
These options/suggestions are the best that I can think of at this time and I hope one of those will work out for you.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE