Database Users

XDA2 Screen, And Accesories For Sale

To cut a long story short, i dropped my xda2 in the toilet at work!
so went home and claimed it on my house insurance and i now own a lovely spvm2000 but im left with this xda2 thats been down the pan, the thing switches on and it all appears to work fine except its black listed, obviously coz i claimed on insurance so i will open it up and sling the pcb in the bin, unless anyone wants some componets from that, but i shall not be selling the phone complete or the pcb seperate. so for sale i have everything else here is a list of what i can think of
fully working screen with no scratches
houseing(scratched but back cover is fine)
4 styli (3 in original o2 retail pckaging)
all the box with instruction and sw cd
leather case
aluminium case (scratched)
Genuine Battery
Cradle
thats all i can think of atm, if u want any of it just make me and offer, dont want much for the stuff as its just sitting there redundant now and not being used!
if u can think of anything else that came with the phone that ive not listed let me know and ill let u know if i got it!
mike

NeCrOpHiLiCaT -- IF you cut the upper part of the PCB off, I'll like the board parts please. CYM

let mw know what bits u want and ill take them off hte board

hi
how much for the lcd ??

im open to offers on all the parts, make me an offer and ill let u know whether i like it or not 8)

I'm interested; did you get my e-mails? Hopefully I am not getting blocked.

pm sent

I need the screen..if u can spare obviously at some cost...pls let know

what about the housing?,my is very damaged and looking for another one.

Connector
Hi Mike, Im interested in the connector that is connected to the mother board, at the base of the phone , mine's gone caput ! :?

the housing is damaged but depends on how bad urs is if it worth akeing my one. the screen is still for sale, and as fot that connector what one do u mean?

connector XDA2
Hi the connector is the one at the base of the PDA, that connects to the dock for charging / activesync, and is connected to the PDA's Mother Board,
Thanks Brennen.

ok that connector looks easy enough to get off, how muchy would you offer for it, if i can remove it without damaging the legs?

How does twenty quid sound...............

did u still got the front AND/OR back casing (as long as it's only scratch not cracked) ? how much will it cost ?
thx.
contact : [email protected]

hi ,i need the motherboard
I can offer you 100.00 US Dollars for the motherboard, can you send me to New York city?
How much is going to cost me the shipping charges?
This is my email
[email protected]
we can work out about my offer
regards
Jorge

I am interested in the screen.
Hi
I am interested in the screen. Can you please give me an idea of how much you are looking to get for it. I am in london, how would it work.
thanx.

Re: connector
Hi, yes I'll have the connector ( £20) you can contact me on
[email protected] ok

i have a problems with my lcd.
http://img11.echo.cx/my.php?image=dscn44310av.jpg
how much for your lcd?
if somebody want another piece of my qtek 2020 (dopod) i can deal...

Replacement of touchscreen!

Does anybody have a manual for the replacement of a touch screen, and an adress to buy touch-screen for MDA Compact !

try ebay...i saw some touchscreens for $20 AUD, which is cheap...
Though dont know how to replace it, looks HARD.
whitemoo.

Thanks! I hope someone has a online manual...

Wel if its anything like the xda2 then replacing the screen is very easy as its just a few screws and a ribbon cable. I had a broken screen xdII and took it apart to see how hard it was to reinstall myself, it was very easy cos like i said it was a few screws and a ribbon cable.

There's a guide with pics in pdf format in this forum, just search for it.

Its very simple as long as you are patient and you don't force anything while trying to open up the phone.
I have worked on couple of Imate Jams and wizards with out a manual without breaking anything.
I have seen the manual on the wiki I believe....
BTW I would suggest using one of those ebay cellphone repair kits that come with the plastic tool to open the phone that helps alot.

digitizer (touch screen) replacement

Hi guys this is my first post (so please be gentle )
I had a hermes with WM 6 working great until my toddler got his hands on it and now the touchscreen doesnt work (looks like its caused by large dent in the centre of the screen), I've had a look around and found the problem to be with the digitizer itself. I was thinking of replacing it myself with this I found on ebay
http://cgi.ebay.co.uk/ws/eBayISAPI....m=260193961530&ssPageName=STRK:MEWA:IT&ih=016
Just wondering if anyone had purchased one of these and had any feedback as to if they actually work and any tips on fitting it

I would give it a shot as its not to expencive and could save your phone.
I just like the way they bundle in a kit to take the phone apart but ask you to make sure what colour the connectors are on the inside of the phone before purchaseing :-D

thanks for your reply, i may just go ahead and give it a go then, I could post the pictures or a guide if its any use to anyone? Other than that wish me luck (i may need it)

The touchscreen on my Cingular 8525 stopped working today, so I'm faced with a similar dillema. I saw the digitizers for 16-20 dollars online, but I've heard it's safer to just replace the entire screen since you have to seperate the screen from the digitizer with an exacto blade. Either that or I'll have to send it to pocketpctechs and be without a phone for 5 days. Thankfully I can still navigate the phone with the jogwheel + dpad.
I found this video showing how to disassemble your 8525 if you're interested.
http://youtube.com/watch?v=zsljpn74SW0

well just to follow up, the replacement touchpad arrived yesterday it was well packaged and even included a CD containing instructions on how to replace the digitizer itself. I removed the old digitizer (using the edge of a tape measure as it was the only thing i had thin enough) and installed the new one and I have to say im well impressed, all works as it should
A bit of advice though, try and use a soldering iron that is less than 15W as I nearly burned through the contacts but other than that i have my baby back yey

Just fixed my Digitizer

I have just got my replacement digitizer in the mail 2day from Hong Kong and installed it just now, all is working perfectly as new again. I did a hard reset when the touch screen was first playing up, so I have lost all my themes, settings etc but luckily my office docs etc are still intact.
Anyhow, I made a video on how to replace the touch screen, its only quick as I did not go from the disasembly part, as there is already videos and tutorials on this, so I just documented on the actual digitizer replacement, which is actually basic 2-5mins work, but I thought a vid would be good for any noobs needing it in the future.
Once I edit it all up I will post the video here.
If anyone needs help on replacing the digitizer just ask. DON'T be tricked into buying the LCD + Digitizer if you only need the touch screen, as it is very easy to do without the lcd, though some ppl disagree.
Thanks for reading, thread will be updatd with Vid asap.

Hi X86
I have a crack on the upper plastic case, thats prob. why I have dirt showing on screen. In your opinion where is it located and can I clean it ?

It seems as if (if the crack is on the actual original housing, not just a add-on case) that dirt/dust has fallen down inbetween the digitizer and the LCD, so you can see it through the touchscreen right?
This is fairly simple to fix, you will either need to patch up the crack with silicone or something (best from the inside so it does'nt look messy) OR buy yourself a whole nw housing which cost about US15-$20.
Then just pull your elf/in apart and use cotton tips and wipes to thoroughly clean the LCD and insides.
If you need any help, just let me know via PM or here.
?Good Luck!

Thanks
That was my feeling, now I just need courage to take apart the casing (either repair or replace )

Thanks for bringing up this issue in the forum and extending your hand to others.
I appreciate it alot.

Hi x86
I have read the sticky for disassembling the elf. Can you tell me if it's necessary to unscrew anything and remove the rear speaker in order to remove the front panel ?
Edit: I think I found the answer in the next pics, the 4 screws attach to the front panel, right ?

Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.

bjonmy said:
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
Click to expand...
Click to collapse
That sounds like both a Digitizer and LCD issue.
Red and white strips is caused by the screen, while the phone not sensing your fingers is caused by digitizer.
But you still managed to use something like mymobiler to rescue your stuff right?
Yeah, you're in Malaysia right? In Singapore, to get this items, we have to get it off ebay or dealextreme.com.
But be careful with this, it void warrenty.
If you send it to HTC service centre, it may cost $160> Singapore dollars.
Cheers,
Jeremy

UPDATE: Broken HARDWare XPERIA X1 Repair on YOURSELF : FULL GUIDE

Before Reading,
Don't forget to --> click thanks button if you found my post useful, you won't be killed if you click that button LOL
Click to expand...
Click to collapse
Inspired from members' aging x1 and SESC full of crap... I'm gladly introduce you this full guide that isn't supposed to be exposed. But IMHO, it is supposed to be known by X1 owner.
I think every X1 headset is out of warranty now. While Sony Ericsson Service Centre is always full of crap, bringing broken X1 is absolutely not good idea.
They will asking "faithful" price sometimes the price is higher than the phone itself. Shame on Sony Ericsson.
So please read this guide before you bring your phone to SESC or any Service Centre.
NOTICE: However I'm not responsible to anything. SO take on your own risk!
1. What is in your X1?
Download these pdfs to read the components in your X1
a. Component in your motherboard (Advance user)
b. Component in your handset (Moderate user)
2. How to (dis)assembly your X1?
Download there pdfs to (dis)assembly your X1 in proffesional way
a. Videos in PDF (high bandwidth ISP or no FUP ISP)
b. Pictures in PDF (low bandwidth ISP or limited quota ISP)
3. How to diagnose and repair your broken X1?
Download there pdfs to repair on yourself
a. Problem and solution related to mainboard (Advance user), (!) read "Component in your motherboard
b. Problem and solution related to phone component (Moderate use)
Additional Fixing COMMON ISSUE GUIDE
(thanks to Hkt, triondave, mymailx and russell.eclair (aka rx.eclair)
Taken from local forums and some from XDA-Developers, it's weird some of these methods are never been shared to here...
1. Broken Flex Cable
Diagnose:
a. When slide out, the digitizer (touchscreen panel) isn't working (screen might be working).
b. When slide out, the screen goes blank
c. The mic and front camera buzzing
Repair:
a. FIRST Aid, (It's temporary and somehow fail if you are not skilled, in unkown way)
First method "Tape Patching",
- You can also apply this method preventing this problem while you like using the XPERIA X1 keyboard.
- As easy as ABC, just put insulator tape on the scratch side of flex cable -see blue rectangle with red 'X' inside.
- You may put on another side but it will give a hard slide-out.
Second method "Arc Manipulator", (it's working)
- Try this when you are failing from the first method.
- You can make a very thin plastic with a proper size -see black rectangle with red 'X' inside- and the thick of the plastic should not be thicker than half height of left compartment -see gray rectangle. (I use broken Lego, about 2-3 mm thick and 1x2 cm large)
- Glued it as close as possible to the edge of the 'arc' flex cable -see yellow line.
Explanation: So even the flex cable being retracted while the slider out, the position of 'arc' flex cable is manipulated as closed slider flex cable position. You've got to be sure that the thick of the plastic will not make the flex cable out of the housing so for assurance, try to move the slide locker upside down several times -see gree rectangle.
Click to expand...
Click to collapse
b. Replace with new flex cable
- search on eBay is the cheapest price. In my country, the price is usually half than local shop but need to wait several weeks.
- After buy the replacement, see the guide to assembling your phone above
How long will it last?
- It's various based on how often you slide it out
Prevention:
- refer to point a.1 (isolate the flex cable) might be useful
- slide it out smoothly (because every time you slide it out roughly, the flex cable being tracked)
- Never / once upon time to slide your X1 out.
2. Unreponsive keyboard
It's very easy to repair it...
[Tutorial] Cleaning X1 Keyboard (Disassemble)
NEVER! follow the threa that is started by hatlo0or, because it is just horrible for beginner and offensive word for some person.
3. Scratching Housing
There's no other way to make it as new, replacing the houding is quite cheap right now. I found that the price varies from 12 to 70 USD.
Which one to buy?
I bought 3 housing for me myself and 1 for my friend.
* I compare those, priced arround 12 USD is better built than priced arround 20 USD.
** the 12 USD is fitted well and the chrome is shinner than 20 USD, the 20 USD Priced is not fitted and quite tricky to assembling it.
*** However the arround 70 USD is the best because it's complete. The housing with 12 and 20 USD have no keyboard but the 70 USD is quite good with keyboard.
Now I am using the keyboard and backplate from the 70 USD priced housing. but for front case and rear case, I used from 12 USD priced housing. As soon as, bought a leather case to prevent it from scratching...
Update!4. Unresponsive Volume Key
Okay, it has been long time that I've been vacuum. After 2-3 years, my X1 has been so terribly damaged. Now, I'm gonna share something else to you all. I dunno know how much people will be helped by this thread since only 20 persons who give comment while 8000 eyes (2x 4000 ppl) read this. But who care? so far there's noone complain.
To be honest, I finally buy another brand new XPERIA X1 from local shop (old stock) with great price because my X1 is what I called "un-help-able"LOL. The problem is unresponsive volume key.
First time, I think it is caused by faulty button but I don't find it wrong after checking up. And after several days' analysis, I found that it is caused by something on motherboard (but I could not determine which one, someone know?). However, the solution is just put something (paper, clip with thickness less than half milimeter) over the USB port (there's a slight gap between the housing and USB port) so it will push down the USB Connector (and Mother board), for unknown reason, your volume key back to normal.
I'm surprised that there are still ones who use X1 since the only person I know using this X1 in my city is me... lol
I just love X1 unfortunately death Sony Ericsson just like White Star Line who make Titanic for becoming so weak.

Thanks for sharing and the credit ;-)

looking good, hope it will be kept up to date
stuck it for the time being
BR, DK

Great GUIDE,THX

Your information is very useful
Your information is very useful and I learnt much from it! Keep working...

Very usefull thread it helped me a lot when I was changing broken display for a new one

OnThomaz said:
It helped me a lot when I was changing broken display for a new one
Click to expand...
Click to collapse
Hi! What instruments have you used to disassemble the phone and to change display? I want to change display touch sensor - mine is totally scratched.

J0hnTR said:
Hi! What instruments have you used to disassemble the phone and to change display? I want to change display touch sensor - mine is totally scratched.
Click to expand...
Click to collapse
It is named aas digitizer not touch sensor.
It's tricky if you want to separate those parts.
You need only:
1. Micro- scissors (No idea how to say it in English) but razor blade is okay (I always used my husband's)
Just very careful to slide between the display and the digitizer or it might break your LCD as well.
Suggest you to search on youtube maybe there's no tutorial about how to replace X1 digitizer but there's a lot tutorial how to separate 'em on other models.
Just watch and learn from those videos. After you have courage, just try it. But I won't take any responsible for you acts. Because everyone's skill is different, I have no idea on yours. One advice from me is be patient and don't execute any acts until you are really sure on what you do.

VSJ said:
It is named aas digitizer not touch sensor.
It's tricky if you want to separate those parts.
Click to expand...
Click to collapse
Wow. I knew it will be hard to disassemble Xperia X1..
And then I looked into the Disassembling Guide - it will be impossible to disassemble it at home!)
Thanks, will search for some repair center!

Wow,, thanks! Great one

Thx for the great GUIDE)
+1

Broken link
The link to the 'component of the motherboard' is broken (goes to ad fly and no further). You can still find it under your My 4shared division of the website, from another download..
downloading now, thanks.

the_analyst said:
The link to the 'component of the motherboard' is broken (goes to ad fly and no further). You can still find it under your My 4shared division of the website, from another download..
downloading now, thanks.
Click to expand...
Click to collapse
Sorry I don't know about that, I just copy paste the link from a local forum.
You may contact rx.eclair (kaskus) or russell.eclair (xda-developers) for questions about the link and so on

Fix Link
http://www.4shared.com/office/JVcaZCN8/component_of_the_motherboard.html
Here is the Component of The Motherboard of X1.

thanks for posting this.
It sucks having to dissasemble the phone to clean the keyboard every now and then. I wonder, is there anyway to prevent it from ever happening again?

Thanks for the extremely useful guide mate!

thanks as the aging X1 will surely need this.

Nice guide, but i still with the volume/keyboard problems...
Like some others, i have traced the proble to the motherboard, but i can't find the real cause... I think, it might be some cold solder or a faulty ground connection (this may explain why if you push the usb connector, the keys start to work again)

Great Job Bro
Great Job Bro!! Solved Problem with my X!
Thanks (;

Hi guys.
I have an old SE X1 lying around. The keyboard was not working properly, so I sent it in under warranty, but they sent it back saying I had physically damaged the screen, so my warranty was void.
When I got it back it wasn't even switching on, so I opened it up and found 2 small components broken off the mainboard. I don't know what they were but I've taken a photo of their locations, so if someone opens their phone, could they tell me what they were? It would also be brilliant if you could measure their values. I want to try soldering some replacements on...
I can't post the link to the image as an image, so I'll link it here:
dl.dropbox.com/u/98849791/DSC_1531.jpg
I'd love to get this thing working again, I miss it.
Thanks, Jodie.