Database Users

Change WLAN MAC adddress

Hi,
Where I work I've access to the WLAN with my LPT. The WLAN is configured with MAC address access list.
Is it possible to change the MAC Address of my P3600 to access the WLAN?
Thanks
Sbay

No absolutely not possible. You should let your mac adress added to the network.

hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
What can i do?????
Help!
and, as i enter in bootloader, after USB i read in Red: WLAN ERROR.
what can i do??

Even if it were possible to change the MAC address, which can be done for your laptop, your employer obviously has a reason for not having the WiFi open to all who have the WEP/WPA key and circumventing this may well not be looked on favourably. Best suggestion is to register your PDA with the IT department so it works without hacking anything

yah
I do agree with deedee

Did someone find the solution to restore WLAN EEPROM?
lambda1976 said:
hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
Click to expand...
Click to collapse
I have almost the same problem...
I have flashed WM6.5 ROM, then decided to return to native WM5.0 ROM. In bootloader there was the same error.
lambda1976 said:
in bootloader, after USB i read in Red: WLAN ERROR.
Click to expand...
Click to collapse
But my device was flashed successfully. After that Wi-Fi was dead
Reflashing does not help... Wi-Fi is as cold as a key

[Q] Cannot enable Wi-Fi

Please Help!!!
cannot enable Wi-Fi on Galaxy tab
When I try to enable Wi-Fi check box from setting I get error.
When I check settings --> about device --> status network "unknown" is listed where the MAC address should be.
Thanks

Try a reboot.
Sent from my GT-P1000 using XDA Premium App

mokman said:
Please Help!!!
cannot enable Wi-Fi on Galaxy tab
When I try to enable Wi-Fi check box from setting I get error.
When I check settings --> about device --> status network "unknown" is listed where the MAC address should be.
Thanks
Click to expand...
Click to collapse
Try reflashing the kernel.
Sent from my GT-P1000 using Tapatalk

[Q] unable to enable data connection.

Hi,
I am using samsung galaxy 3, [purchased in November 2010] it came up with android version 2.1. while i am using same version i used to enable/disable the data connection by dialing *#*#4636#*#* and phone information ->more ->disable/enable data connection filed . it working fine there.
Recently i upgraded my phone to android 2.2 after that using same method i disable the data connection, but after that if i want to enable data connection[using same method mentioned above] it is not enabling and it is not showing any error also.
please help me out how to overcome this problem.
Thanks,
sai

Just reboot phone after you enable data connection...it'll work for sure...we all had this bug when we were on froyo
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Hercolubus Rom v 2.0
powered by
G3mod by Arakmar 12/04/2012.zip
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Even after reboot i am unable to connect to data connection. :-(

mvsksai said:
Even after reboot i am unable to connect to data connection. :-(
Click to expand...
Click to collapse
Do you have the right apn settings setup? (thats in Settings/Wireless and network/Mobile networks/Acces Point Names) with my provider I needed to do it manually to acces mobile data. (actually I had to text a certain number wich would give me the proper settings). Maybe you can check that?

Actually when ever we click on "enable data connection" [irrespective of VPN settings] it should enable, after that only it will check for VPN settings for which SMSC have to connect. But here "enable data connection" it self not reflecting change of type to "Enable" .

Fix wifi mac address problem u8800

1 .restore your original partition
2 .update with official 2.3.5(some phone will be lost imei)
3 .dial *#*#2846579#*#*
4 .background settings- qualcomm background settings-open-password 0 confirm
5 .usb port settings manufactor mode , and restart the phone
6 .turn on usb debugging and connect to pc
7 .run DFS , select port db adapter (downloadfrom attached files)
8 .click on spc
9 .click on pragramming tab
10.if you lost your imei type and write imei(check attached files)
11.check your current wifi-mac address
12.and type it in the mac address box
13.write after successfull close and reopen the dfs and connect again
14.click on read button (nearly to mac address)
15.mac address will show automatically
16. now root and flash any rom wifi will work :good:

thanks for your help:good:
with this new DFS-tool{old one 3.3 cannot restore mac} i managed to restore my mac address and also the serial number!:highfive:

RajuMon said:
1 .restore your original partition
2 .update with official 2.3.5(some phone will be lost imei)
3 .dial *#*#2846579#*#*
4 .background settings- qualcomm background settings-open-password 0 confirm
5 .usb port settings manufactor mode , and restart the phone
6 .turn on usb debugging and connect to pc
7 .run DFS , select port db adapter (downloadfrom attached files)
8 .click on spc
9 .click on pragramming tab
10.if you lost your imei type and write imei(check attached files)
11.check your current wifi-mac address
12.and type it in the mac address box
13.write after successfull close and reopen the dfs and connect again
14.click on read button (nearly to mac address)
15.mac address will show automatically
16. now root and flash any rom wifi will work :good:
Click to expand...
Click to collapse
Didn't work for me. Actually there is no field for mac address change. Please help me...

check
avi062 said:
Didn't work for me. Actually there is no field for mac address change. Please help me...
Click to expand...
Click to collapse
can you connect the phone to dfs tool

Not working with ICS AuroraSP
There is no background setting in ICS AuroraSP.
So after dialing *#*#2846579#*#* nothing happens.

its only on official GB .update your Phone with official update
download link here(http://consumer.huawei.com/en/support/products/downloads/detail/u8800-en.htm?id=13396)

Sorry but this cdma tool is 3.1 and there is no mac adress field... can you send me the 3.3 or somehting?

nick#18 said:
Sorry but this cdma tool is 3.1 and there is no mac adress field... can you send me the 3.3 or somehting?
Click to expand...
Click to collapse
I have to confirm: the attached file brings a tool 3.1 - no MAC option for my device...

android_paul said:
I have to confirm: the attached file brings a tool 3.1 - no MAC option for my device...
Click to expand...
Click to collapse
The demo version from here should do the trick too (worked on U8860).
http://cdmatool.com/download

Blefish said:
The demo version from here should do the trick too (worked on U8860).
http://cdmatool.com/download
Click to expand...
Click to collapse
Hi
Tried both DFS.exe and DFS demo. I can see the updated IMEI on the device but the phone still doesn't show updated wifi
any suggestions
Thanks for helping on the IMEI part

mohammad.nomaan said:
Hi
Tried both DFS.exe and DFS demo. I can see the updated IMEI on the device but the phone still doesn't show updated wifi
any suggestions
Thanks for helping on the IMEI part
Click to expand...
Click to collapse
Try switching the OTP NV filters on/off etc. I had similar issue on U8860 and somehow I was able to write all the info back eventually. I don't remember what I specifically changed though. Great to know IMEI is back though!

Blefish said:
Try switching the OTP NV filters on/off etc. I had similar issue on U8860 and somehow I was able to write all the info back eventually. I don't remember what I specifically changed though. Great to know IMEI is back though!
Click to expand...
Click to collapse
Thanks Blefish,
The IMEI is back as I wanted
I tried that option as well. As you can see on the screenshot, I see the WiFi keys in the application as before but the same does not show on my device.
Tried both OTP NV Enable & Disable but still the same result.
If you recommend, ill flash the official update again if that can bring back the wifi keys or else ill leave it as it coz your Ideos Setting app does have that option and you I hope we will have it in CM12 as well
EDIT
DFS Demo helped in ficing WiFi keys. NV option helps as Blefish pointed out
Now all if fine - IMEI & WIFI
thanks a lot for your help and assistance

Blefish said:
Try switching the OTP NV filters on/off etc. I had similar issue on U8860 and somehow I was able to write all the info back eventually. I don't remember what I specifically changed though. Great to know IMEI is back though!
Click to expand...
Click to collapse
Hi Blefish, I would like to know if your SN is correct (in settings) after using DFS.
On my Honor I have everyting OK only when I restore it via 5iromtoolbox, but I cant flash any rom except B939 after that :crying:
I wonder if you have SN the same as MAC in settings, too

JekaPinsk said:
Hi Blefish, I would like to know if your SN is correct (in settings) after using DFS.
On my Honor I have everyting OK only when I restore it via 5iromtoolbox, but I cant flash any rom except B939 after that :crying:
I wonder if you have SN the same as MAC in settings, too
Click to expand...
Click to collapse
In my U8800 everything is ok, however, U8860 had zero imei and zero BT/MAC address (which was set to a random one). The serial number shown in the projectmenu tool (Huawei firmware stock) shows correct serial number (the 16 digit one, same as on the phone behind the battery).
In U8800pro/U8860 ICS release, Huawei is using the Settings->Status serial number same as MAC address. If the serial number shows unknown, MAC addresses are incorrect too.

Blefish said:
In U8800pro/U8860 ICS release, Huawei is using the Settings->Status serial number same as MAC address. If the serial number shows unknown, MAC addresses are incorrect too.
Click to expand...
Click to collapse
On B919 my MAC was ok bun SN was unknown

JekaPinsk said:
On B919 my MAC was ok bun SN was unknown
Click to expand...
Click to collapse
BT MAC aswell? I don't remember which one it used.

Blefish said:
BT MAC aswell? I don't remember which one it used.
Click to expand...
Click to collapse
Yes. Until I made changes to BT MAC it showed nothing, but now I have it working.
PS: Why new branches?

JekaPinsk said:
Yes. Until I made changes to BT MAC it showed nothing, but now I have it working.
PS: Why new branches?
Click to expand...
Click to collapse
For TWRP (and maybe more) .

Hello guys,
my U8800-51 is on the latest LegacyHuawei CyanogenMod 11.0 by Mr Blefish but i ended up without no WIFI MAC and BLuetooth. So i tried as stated on this post to downgrade to android 2.3 but when it gets to part 2/2 of the installation, gives me an error... Then, i proceeded to use DFS v14 to try to write the MAC adress (still on CyanogenMod) but it failed to find the COM PORT through PC (ADB install correct and showing the device, USB debuggin enable). The only way i managed to see the port in the device manager and DFS is tu putting the phone on the PINK SCREEN (Download mode, right?). but, DFS throw me some errors like CPS_BPSR and so on.
I also tried enabling DIAG port through ADB but didn't work.
So far, it has failed... But maybe you can help me.
I understand this is a very old phone, but i live in a 3rd world country where phones are ver expensive (not to mention an Hyperinflation process that we are living through). So, i have to try everything to save it.
Thanks in advance for you help
Regards

[Q] problem wifi and hotspot cm11. 20140907

Hi Please help help
I'm from asia Iran
I have a problem with wifi and hotspot
Wifi saved bat not connected
I installed cm-11-20140907-UNOFFICIAL-Blefish-u8800 After the android.2.3.5
I used cm11 bat wifi to fail mac adress In settings Phone show 00:00:00:00:00:00
Please help my . Thank you.

Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.

wifi problem cm11
Blefish said:
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
Click to expand...
Click to collapse
Use ideosx5settings app bat not connected
my use all rom this web bat Except rom port official in None not connected wifi
Please help Very Important

Blefish said:
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
Click to expand...
Click to collapse
Please help Please help

I want to help, but for me it's difficult to understand you
What have you done in IDEOS X5 Settings app? Did you change your WiFi MAC Address? Not all MAC Addresses are correct. Best use some kind of generator, like this for example.

wifi problem cm11
bat how use MAC Address Generator ?

Well, just click "generate Mac address", and you will get something like this: " 7B-31-DC-83-EB-25".
Write this into your device instead of 00-00-00-00-00-00 that you have now. And everything should work.

wifi problem cm11
Teg8 said:
Well, just click "generate Mac address", and you will get something like this: " 7B-31-DC-83-EB-25".
Write this into your device instead of 00-00-00-00-00-00 that you have now. And everything should work.
Click to expand...
Click to collapse
How Write this into your device instead of 00-00-00-00-00-00 that you have now a cm11

wifi problem cm11
Blefish said:
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
Click to expand...
Click to collapse
Mr. Blefish
Why do not you help me!

1. Open IDEOS X5 Settings app
2. Enable "Custom HW address" option (third from the bottom)
3. Select "Wi-Fi MAC Address" option and write new MAC address

wifi problem cm11
Teg8 said:
1. Open IDEOS X5 Settings app
2. Enable "Custom HW address" option (third from the bottom)
3. Select "Wi-Fi MAC Address" option and write new MAC address
Click to expand...
Click to collapse
Thank you very much
The problem was solved
Thank you very much
Thank you very much
Thank you very much