Database Users

Is it possible to change the MAC ADDR of Hermes?

Hello to all,
Currently McDonalds provided a free wifi for 20mins for each device
Is it possible to change my MAC ADDRRESS of my PPC to enjoy other 20mins?
and I'd search for some old post...
is that the MAC stored in the wifi chip's and there's nothing to do with the registry,
The only possible way is to change the original drivers ?
thankyou
PS. My Hermes is running WM5

There is some discussion regarding changing the MAC address of the Hermes using a custom mode controller for the TIACXWLN driver. Check out this thread here.
Since I haven't found the time to try downgrading to WM5 to test the older driver out, would you be so kind as to help test a theory of mine by installing the custom mode controller to you device to see if you can set a custom MAC address and/or set promiscuous mode? The file can be downloaded for free and is located at the bottom of AlexB's website found here.
Once you download and install the .cab, the program can be found in
"/program files/custom controller/tiacxwln_ctrl.exe"
Enable WIFI in your com manager and execute this program. Let us know if you can successfully set your MAC address or enable promiscuous mode.
Cheers and good luck

Lancealot said:
Since I haven't found the time to try downgrading to WM5 to test the older driver out, would you be so kind as to help test a theory of mine by installing the custom mode controller to you device to see if you can set a custom MAC address and/or set promiscuous mode?
Click to expand...
Click to collapse
Does not for work me on my WM5 Hermes. I get the same error messages as you.

Change WLAN MAC adddress

Hi,
Where I work I've access to the WLAN with my LPT. The WLAN is configured with MAC address access list.
Is it possible to change the MAC Address of my P3600 to access the WLAN?
Thanks
Sbay

No absolutely not possible. You should let your mac adress added to the network.

hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
What can i do?????
Help!
and, as i enter in bootloader, after USB i read in Red: WLAN ERROR.
what can i do??

Even if it were possible to change the MAC address, which can be done for your laptop, your employer obviously has a reason for not having the WiFi open to all who have the WEP/WPA key and circumventing this may well not be looked on favourably. Best suggestion is to register your PDA with the IT department so it works without hacking anything

yah
I do agree with deedee

Did someone find the solution to restore WLAN EEPROM?
lambda1976 said:
hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
Click to expand...
Click to collapse
I have almost the same problem...
I have flashed WM6.5 ROM, then decided to return to native WM5.0 ROM. In bootloader there was the same error.
lambda1976 said:
in bootloader, after USB i read in Red: WLAN ERROR.
Click to expand...
Click to collapse
But my device was flashed successfully. After that Wi-Fi was dead
Reflashing does not help... Wi-Fi is as cold as a key

How to? Fascinate Diag mode (QPST/QXDM/CDMA Workshop)

Does anyone know information about how to connect the Samsung Fascinate as Diag Mode driver? ie: this type of connection needed for QPST/QXDM/CDMA Workshop.
I tried 'debugging mode' enabled from the settings in the Applications, but it didn't create any new port that would recognize for my phone.
The Epic solution is pretty strait forward
Install USB Drivers:
32 Bit or 64 Bit
Put phone into DIAG mode:
Dial ##8778#
Select UART = Modem, USB = Modem.
Click to expand...
Click to collapse
This doesn't seem to work on Fascinate though.

Go to Settings - Wireless Networks - Click to Dialup Networking this will also put it in Dialup mode

hetaldp said:
Go to Settings - Wireless Networks - Click to Dialup Networking this will also put it in Dialup mode
Click to expand...
Click to collapse
wow man, thanks a lot that worked.

Remember to put it Again Dialup Networking off

Thank you for the steps. I was also able to get the phone to be read by QPST and CDMA Workshop. The odd thing is that when I tried to read the phone again the next day, none of the software will read the phone. Interestingly, I can see the COM port and the Modem port in the Device Manager, but the software refuses to read the phone. I am wondering if I accidentally changed one of the settings to turn it into UART or something to this effect, but the code that I found for this (##UPST#) does not work on the phone, even with hidden menu enabled. Any suggestions, currently I am stuck with a phone that can only do voice and text, no 3G? Thank you in advance!

You could try Diag mode
Diag/Testing Mode
*#4636*1111#
QPST sees it, but nothing is editable, in Dial-Up mode?

Thank you for your response! I tried that, it took me to the menu, plugged the phone to the PC, Device Manager shows Samsung Diagnostic Port, I use CDMA Workshop to try to at least read the phone. I connect to the correct COM port, but CDMAWS fails in reading it. I don't get it, it used to work fine with almost the exact same setup. I uninstalled the drivers, reinstalled them, same thing. Wiped the phone, same thing. Kind of frustrating. The only resort I have now is to maybe just get it fully flashed to stock so that I can start from scratch again. Odd, I have never had a phone that was giving me a COM port that phone software consistently fails to read, especially when it worked before. lol. Any assistance with anything else I may try would be greatly appreciated.

**usbui select Modem.. and

Bringing this issue up.... I cannot get it to work. I've read tons of threads and everyone says go to Device Manager and click Ports and then change the port on the Samsung to port 1 and it will show up blah blah Blah.... there is no list that says "Ports" in Device Manager. I have this DialUpNetworking thing checked and debug mode and the port1 shows up in QPST but it says "No Phone". And yes all drivers are installed.
Diag/Testing Mode
*#4636*1111# ??????
That doesn't do jack. It just lets me input the numbers and when I press the last #, all the numbers vanish. I need this to work or I have to get a different Phone.

nFiniti said:
Bringing this issue up.... I cannot get it to work. I've read tons of threads and everyone says go to Device Manager and click Ports and then change the port on the Samsung to port 1 and it will show up blah blah Blah.... there is no list that says "Ports" in Device Manager. I have this DialUpNetworking thing checked and debug mode and the port1 shows up in QPST but it says "No Phone". And yes all drivers are installed.
Diag/Testing Mode
*#4636*1111# ??????
That doesn't do jack. It just lets me input the numbers and when I press the last #, all the numbers vanish. I need this to work or I have to get a different Phone.
Click to expand...
Click to collapse
Do a search in general...i posted how there. It's like *33 something.

**33284 is what ur looking for
Edit: you need to set up the com. That requires knowing the port and putting the phone into dial up mode.

TRY **USBUI (**87284)
You can switch the UART and USB from PDA to MODEM here.

denonlake said:
TRY **USBUI (**87284)
You can switch the UART and USB from PDA to MODEM here.
Click to expand...
Click to collapse
No, I know exactly what he's doing. The phone needs to be in network dial up mode. But for qpst to reckognize it, he needs to add the com.

I found that only the .323 version of qpst worked for me. Also there is the *229 (i think) will reprogram those settings you may have messed up, maybe try that?
Sent from my rooted froyo Fascinate

ziggy484 said:
I found that only the .323 version of qpst worked for me. Also there is the *229 (i think) will reprogram those settings you may have messed up, maybe try that?
Sent from my rooted froyo Fascinate
Click to expand...
Click to collapse
323 works for basic flash, however if he's trying to get ppp configs setup for 3g and what not, he will need build 215. 323 will always revert to the original settings. If he's just trying to flash the prl, then it's no big deal. If he's trying to flash over to a different carrier, then it'll revert to vrz settings.

Menu > Settings > Wireless & Networks
Enable Dial up Networking
Next..
Menu > Settings > Applications > Development
Enable USB Debugging
-------------------------------------------
If Dial-up Networking is not showing perform the following. Dial **33284 followed by SPC (000000 or 468346 ) then scroll to Port Map and select HFK,DIAG. Once this is complete, you should now have Dial-up Networking showing up under Wireless and Network.
Bypass Activation:
Press "Emergency Call"
Dial *#83786633 then press send
After you press "send" press the "home" key and you should now be passed activation

this worked in getting the fascinate into daig mode. thank you!!!
JUSMEJOSE said:
Menu > Settings > Wireless & Networks
Enable Dial up Networking
Next..
Menu > Settings > Applications > Development
Enable USB Debugging
-------------------------------------------
If Dial-up Networking is not showing perform the following. Dial **33284 followed by SPC (000000 or 468346 ) then scroll to Port Map and select HFK,DIAG. Once this is complete, you should now have Dial-up Networking showing up under Wireless and Network.
Bypass Activation:
Press "Emergency Call"
Dial *#83786633 then press send
After you press "send" press the "home" key and you should now be passed activation
Click to expand...
Click to collapse

pkopalek said:
You could try Diag mode
Diag/Testing Mode
*#4636*1111#
QPST sees it, but nothing is editable, in Dial-Up mode?
Click to expand...
Click to collapse
thanks dude your really great i'll bet you make your company lotta money

i need the 16 digit password to change the serial number in sansung galaxy s i400
hello
i need the 16 digit password to change the serial number in sansung galaxy s i400 in cdma works shop please
---------- Post added at 06:18 PM ---------- Previous post was at 06:09 PM ----------
denonlake said:
TRY **USBUI (**87284)
You can switch the UART and USB from PDA to MODEM here.
Click to expand...
Click to collapse
i need the 16 digit password to change the serial number in sansung galaxy s i400 to cdma works shop please

JOSEUBIERA said:
hello
i need the 16 digit password to change the serial number in sansung galaxy s i400 in cdma works shop please
---------- Post added at 06:18 PM ---------- Previous post was at 06:09 PM ----------
i need the 16 digit password to change the serial number in sansung galaxy s i400 to cdma works shop please
Click to expand...
Click to collapse
A quick interweb search brought up this number for the Samsung Continuum SCH-I400
20 10 03 16 19 81 02 19
.

[Q] How to change NAND android WIFI and BT MAC address?

After flashing NAND Android, I found that the wifi mac address is : 00:11:22:33:44:55, and the BT mac address is :50:C3:00:00:00:00, any one can tell me how to change them ?
thx.

are u having wifi problems? i am.. i wanna change it too..

+1 for wifi
at home its fine, at work its a unusable mac address

believems said:
After flashing NAND Android, I found that the wifi mac address is : 00:11:22:33:44:55, and the BT mac address is :50:C3:00:00:00:00, any one can tell me how to change them ?
thx.
Click to expand...
Click to collapse
Sorry, accidently hit the Thanks button instead of Quote.
First: Wrong thread, this should be in Q&A.
Second: This is not possible yet, as the current version of MAGLDR doesn't have the possibility to pass parameters (other then AD SD DIR) to the kernel.
Hopefully, in a future update, Cotulla will add this to MAGLDR. For now, you can only use the fake MAC-address supllied with the NAND-builb.
MOD: Can you move this thread to the Q&A Section please?
Sincerely,
Mac

Apparently, there is a solution. I found this on one of the NAND build threads:
clio94 said:
guys this is a temporary way to change wifi mac address in 0.2 build
0.2 build is prerooted so we can change system files
install root explorer 2.13
go to /system/etc/ find file calibration and open it as view in text editor
in first line you will see the mac address
put your desired mac address,save and exit
and then make reboot
voila now you have new mac address
thanks to osm http://forum.xda-developers.com/showpost.php?p=9806811&postcount=17 for this trick
Click to expand...
Click to collapse
Sincerely,
Mac

Macelangelo77 said:
Apparently, there is a solution. I found this on one of the NAND build threads:
Sincerely,
Mac
Click to expand...
Click to collapse
but, BT mac address how to change?...

So, just NAND flashed my HD2 over to DFT's .2 release of Android. This gave me the infamous MAC address issue of 00:11:22:33:44:55 but the file given here doesn't exist. The location exists, but there's no file by the name of calibration in that location. I used Root Explorer to search my phone even for calibration and it didn't find a thing. Any ideas what it may actually be called?

I also need to change bluetooth mac...
Is there a chance to change it???

no one a idear?

WiFi MAC Address Workaround:
Must have Android Developer Kit installed
1. adb pull /system/etc/calibartion
2. open calibration file with wordpad. Not notepad.
3. change the line that says macaddr=00:11:22:33:44:55 to either your real mac or just increment the last digit
4. save file and close
5. adb push calibration /system/etc
6. reboot phone

smokey155193 said:
WiFi MAC Address Workaround:
Must have Android Developer Kit installed
1. adb pull /system/etc/calibartion
2. open calibration file with wordpad. Not notepad.
3. change the line that says macaddr=00:11:22:33:44:55 to either your real mac or just increment the last digit
4. save file and close
5. adb push calibration /system/etc
6. reboot phone
Click to expand...
Click to collapse
Not all builds have this file nor read this file.
Sent from my HD2 Droid (HD) using XDA App

and bluetooth mac?!

any one knows how to change BLUETOOTH mac address with NAND?

[Q] problem wifi and hotspot cm11. 20140907

Hi Please help help
I'm from asia Iran
I have a problem with wifi and hotspot
Wifi saved bat not connected
I installed cm-11-20140907-UNOFFICIAL-Blefish-u8800 After the android.2.3.5
I used cm11 bat wifi to fail mac adress In settings Phone show 00:00:00:00:00:00
Please help my . Thank you.

Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.

wifi problem cm11
Blefish said:
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
Click to expand...
Click to collapse
Use ideosx5settings app bat not connected
my use all rom this web bat Except rom port official in None not connected wifi
Please help Very Important

Blefish said:
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
Click to expand...
Click to collapse
Please help Please help

I want to help, but for me it's difficult to understand you
What have you done in IDEOS X5 Settings app? Did you change your WiFi MAC Address? Not all MAC Addresses are correct. Best use some kind of generator, like this for example.

wifi problem cm11
bat how use MAC Address Generator ?

Well, just click "generate Mac address", and you will get something like this: " 7B-31-DC-83-EB-25".
Write this into your device instead of 00-00-00-00-00-00 that you have now. And everything should work.

wifi problem cm11
Teg8 said:
Well, just click "generate Mac address", and you will get something like this: " 7B-31-DC-83-EB-25".
Write this into your device instead of 00-00-00-00-00-00 that you have now. And everything should work.
Click to expand...
Click to collapse
How Write this into your device instead of 00-00-00-00-00-00 that you have now a cm11

wifi problem cm11
Blefish said:
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
Click to expand...
Click to collapse
Mr. Blefish
Why do not you help me!

1. Open IDEOS X5 Settings app
2. Enable "Custom HW address" option (third from the bottom)
3. Select "Wi-Fi MAC Address" option and write new MAC address

wifi problem cm11
Teg8 said:
1. Open IDEOS X5 Settings app
2. Enable "Custom HW address" option (third from the bottom)
3. Select "Wi-Fi MAC Address" option and write new MAC address
Click to expand...
Click to collapse
Thank you very much
The problem was solved
Thank you very much
Thank you very much
Thank you very much