Hi,
Where I work I've access to the WLAN with my LPT. The WLAN is configured with MAC address access list.
Is it possible to change the MAC Address of my P3600 to access the WLAN?
Thanks
Sbay
No absolutely not possible. You should let your mac adress added to the network.
hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
What can i do?????
Help!
and, as i enter in bootloader, after USB i read in Red: WLAN ERROR.
what can i do??
Even if it were possible to change the MAC address, which can be done for your laptop, your employer obviously has a reason for not having the WiFi open to all who have the WEP/WPA key and circumventing this may well not be looked on favourably. Best suggestion is to register your PDA with the IT department so it works without hacking anything
yah
I do agree with deedee
Did someone find the solution to restore WLAN EEPROM?
lambda1976 said:
hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
Click to expand...
Click to collapse
I have almost the same problem...
I have flashed WM6.5 ROM, then decided to return to native WM5.0 ROM. In bootloader there was the same error.
lambda1976 said:
in bootloader, after USB i read in Red: WLAN ERROR.
Click to expand...
Click to collapse
But my device was flashed successfully. After that Wi-Fi was dead
Reflashing does not help... Wi-Fi is as cold as a key
Related
Hello to all,
Currently McDonalds provided a free wifi for 20mins for each device
Is it possible to change my MAC ADDRRESS of my PPC to enjoy other 20mins?
and I'd search for some old post...
is that the MAC stored in the wifi chip's and there's nothing to do with the registry,
The only possible way is to change the original drivers ?
thankyou
PS. My Hermes is running WM5
There is some discussion regarding changing the MAC address of the Hermes using a custom mode controller for the TIACXWLN driver. Check out this thread here.
Since I haven't found the time to try downgrading to WM5 to test the older driver out, would you be so kind as to help test a theory of mine by installing the custom mode controller to you device to see if you can set a custom MAC address and/or set promiscuous mode? The file can be downloaded for free and is located at the bottom of AlexB's website found here.
Once you download and install the .cab, the program can be found in
"/program files/custom controller/tiacxwln_ctrl.exe"
Enable WIFI in your com manager and execute this program. Let us know if you can successfully set your MAC address or enable promiscuous mode.
Cheers and good luck
Lancealot said:
Since I haven't found the time to try downgrading to WM5 to test the older driver out, would you be so kind as to help test a theory of mine by installing the custom mode controller to you device to see if you can set a custom MAC address and/or set promiscuous mode?
Click to expand...
Click to collapse
Does not for work me on my WM5 Hermes. I get the same error messages as you.
Hi everybody! I've searched for a problem like mine here but I didn't find it, so I'm openning a new thread. I hope it's ok to do that!
I'm having some trouble trying to connect to the wifi network at the hospital I work. I tried to follow the intructions they gave, but these instructions are for desktop computers and notebooks and they have steps that I don't know how to follow in my blackstone. The instructions are the following (for windows XP):
-add a new network with the name: wifiuel
-choose WPA2 autentication
-choose AES cryptography
-choose PEAP access, go to properties and uncheck all options. Also, at autentication method EAP-MSCHAPv2, click on configure and uncheck the option to use the logon's name and password automaticly.
There are a few more steps, but from this last one I can´t go on. When I tap on the properties buton on my blackstone, I get the following warning: "Cannot log on to the wireless network. This network requires a personal certificate to positively identify you."
In case you just didn't understand the steps because of my poor english, here´s a link to them, but this link is for the windows vista configuration (I chose it because it is mainly in english and it has many screenshots, so I think all of you can understand it): http://www.uel.br/ati/suporte/pages/configuracao-wifi-uel/windows-vista-us.php
Any ideas of how I can solve this problem?
I'm runnig Dutty's Leo Holy Grail R0 rom, with WM6.5 and I can log on just fine in other networks.
Thanks in advance!!!
Hi,
just trying to help u.
in your case, maybe you need some sort of certificate like you stated above. Go ask your IT service/help desk on where you can get one.
Or maybe you need to register your device (WLAN Mac address or you need to use fix IP). For this, you also need to ask help from your IT service to register your device to their list, so that u can connect to their wifi network.
Not much help, but u can try them
Oh, thanks, I was going to do that anyway, but I though someone here could help me or indicate some wifi utility that could handle those steps to configure my network.
Well, thanks for your attention!
Moved as not software release...
Hey, I've got some news
I have some new facts to tell you guys and see if you can help me. First, I discovered that when I just ignore the warning that I get when I click on properties, I get another message saying that the server certificate is issued by an unknown autority and it couldn't be validated. Then I finally talked to the support staff at the hospital and they said that they don't use any certificates at all. No personal nor server certificates are needed. So I guess that the problem is with Windows Mobile, which is asking for certificates when they're not needed.
Is there any way to command WM to not ask for a certificate when logging on a particular network, because I believe this could be the solution for my problem!
Thanks in advance!!!
Hi all,
*
To my work, I can access to the WIFI by giving my MAC address. I gave my MAC address, and ok, I had access.
However, I flashed the rom CloudyG3 and following this, no access to WIFI... I've realized that my MAC address had changed (and I saw I 'wasn't alone in this case) ... So I did a new request for an access with the new MAC address, and it doesn't work ...
*
I used the application Wireless mac address change to replace the current MAC address with my old address and I regain access to the corporate network ...
*
So is there anyone could help me to find my old MAC address? I tried to reflash my phone, it does not change ... I tried to pass on the Rom OptimusG3, the MAC address remains on the new ...
*
Thank you in advance for your help
Mine does the same thing and I cannot get a answer on how to fix the wifi mac address change.
Flash with my Nandroid backup... unsuccessfully...
Hi Please help help
I'm from asia Iran
I have a problem with wifi and hotspot
Wifi saved bat not connected
I installed cm-11-20140907-UNOFFICIAL-Blefish-u8800 After the android.2.3.5
I used cm11 bat wifi to fail mac adress In settings Phone show 00:00:00:00:00:00
Please help my . Thank you.
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
wifi problem cm11
Blefish said:
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
Click to expand...
Click to collapse
Use ideosx5settings app bat not connected
my use all rom this web bat Except rom port official in None not connected wifi
Please help Very Important
Blefish said:
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
Click to expand...
Click to collapse
Please help Please help
I want to help, but for me it's difficult to understand you
What have you done in IDEOS X5 Settings app? Did you change your WiFi MAC Address? Not all MAC Addresses are correct. Best use some kind of generator, like this for example.
wifi problem cm11
bat how use MAC Address Generator ?
Well, just click "generate Mac address", and you will get something like this: " 7B-31-DC-83-EB-25".
Write this into your device instead of 00-00-00-00-00-00 that you have now. And everything should work.
wifi problem cm11
Teg8 said:
Well, just click "generate Mac address", and you will get something like this: " 7B-31-DC-83-EB-25".
Write this into your device instead of 00-00-00-00-00-00 that you have now. And everything should work.
Click to expand...
Click to collapse
How Write this into your device instead of 00-00-00-00-00-00 that you have now a cm11
wifi problem cm11
Blefish said:
Use ideosx5settings app to set WiFi MAC address. Then reboot and it should work . Next time use the q/a thread.
Click to expand...
Click to collapse
Mr. Blefish
Why do not you help me!
1. Open IDEOS X5 Settings app
2. Enable "Custom HW address" option (third from the bottom)
3. Select "Wi-Fi MAC Address" option and write new MAC address
wifi problem cm11
Teg8 said:
1. Open IDEOS X5 Settings app
2. Enable "Custom HW address" option (third from the bottom)
3. Select "Wi-Fi MAC Address" option and write new MAC address
Click to expand...
Click to collapse
Thank you very much
The problem was solved
Thank you very much
Thank you very much
Thank you very much
As in beta, you still can't connect to Wi-Fi in official Oxygen OS 10. Network reset did not help
OP 6T has no IP address.
Anyone have any ideas?
..
I had a Bet 10 v.17 phone also had no Wi-Fi connection.
After returning to Android 9, IP appeared again and there were no connection problems.
This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.
Azar_k said:
This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.
Click to expand...
Click to collapse
I have turned off all filters on the router.
I changed to MAC of device, to randomized MAC. Nothing new.
Still can't connect to Wi-Fi.
This is insane! New system and connection problems?
Instead of getting better, it's getting worse.
Bluetooth issues on my phone
I can't even enable wifi connection
Reflash the official update zip....worked for me
I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.
SOLUTION !!!
justforkix said:
I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.
Click to expand...
Click to collapse
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Currently, Android 10 connects to a Wi-Fi network without a problem.
You should write the patch in Android 10.
Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?
Is your OnePlus font italic?
Have you used Magisk Canary?
justforkix said:
Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?
Click to expand...
Click to collapse
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?
drozel said:
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?
Click to expand...
Click to collapse
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.
WPA/WPA2 helped for me... OP can't connect to only-WPA2 networks after Android 10 update.
Installed via OxygenUpdater, no root, no unlocked bootloader, full stock
Alex_H_H said:
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Click to expand...
Click to collapse
many, many thanks!
I can still connect to my existing network, I just had to update my MAC filters.
I really advise against using WPA at all - see if there is firmware update for your router.
Are you using Magisk Canary?
Roll back to Stable and reinstall oos
firegate22 said:
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.
Click to expand...
Click to collapse
I had the same issue, flashing a custom kernal (Omega) fixed the problem. Why ? Idk
change private DNS to automatic
changing my DNS from cloudflare to automatic helped me (after also switching to device MAC)
dbarrett480 said:
Reflash the official update zip....worked for me
Click to expand...
Click to collapse
Did you flash the full zip or incremental? From TWRP? Is any wipe necessary after flashing?