Database Users

Is my HTC Shift SIM locked ?

I live in Switzerland and I bought HTC Shift from US.
I'm trying to connect in SnapVUE via 3g SIM but I always get "the answering modem has disconnected".
Can perhaps help i00 rom ? (http://forum.xda-developers.com/showthread.php?t=480525&highlight=sim+lock)
Any help ?
Thanks.

Most probably you need to enter the correct GPRS/UMTS username/pass in your connection settings.
You could also do a "clear snapvue" and have the automatic settings take effect.
Find your APN username and password for your GPRS telco and enter it in connection settings, You might even need to create a new 3G connection first.
Flash i00 ROM anyway, it will greatly enhance your shift.

Hi lucid,
I don't have GPRS/UMTS username/pass.
The SIM I'm using works well without user/pass on a Tytn II so I don't think they are required, aren't they?
When you say "Clear SnapVUE" do you mean to reset it using HTC official tool?
Because I already did it.
When I try to set up conection I do the following (read on HTCmanual):
Snapvue --> Settings --> Connection setup --> select country and carrier --> autoconfigure --> restart
After that I try to connect but get the same errors.
Thanks for help; I have to make it works.

WiFi connection problems

Hi there,
I've just upgraded my HTC Tattoo to the SP-FroYo v2.2.1 AOSP ROM, I had hoped some WiFi problems had been solved. At my work we have a WPA2-PSK encrypted network which also sends out a WPA-PSK encrypted network. Only my HTC Tattoo shows it as a WEP encrypted network, but I can't connect. I use a WPA2-PSK encrypted network at home and it works fine.
Is there a update available to fix some WiFi signals?
Thanks!

Did you had a costum ROM before that one?
Sometimes, if something doesn't work, i allways flash oficial ROM first, then root and finally flash the costum ROM.
Cheers

I had the original ROM before this, and in that ROM it didn't work either!

Have you tried to go to :
Settings > Wireless Controls > Wi-Fi Settings and press the Menu button, select Advance > Regulatory domain
And tell the phone to use (all) 14 channels.
Cheers

It still isn't working, it recognising it but I can't connect

use Click as AP / tethering?

well, i have the KalimochoAz v10.12 /2.3-rom on my rooted Click. (i know, there are now newer versions, but this is ok for now) and a Haipad M701 (chinese android 2.1-7"-Tablet, rooted) i'd like to use the data (apn/3g) connectrion from my phone to use internet on my pda via wlan.
If i understood everything right, that's what tethering is. I also installed 2 apps (Barnacle Wifi tether and wireless tether) on my phone. I think, i did everything that is set-able, but when i swicht on wlan on my pad, i don't see my SSID i gave for my click.
Anyone got an idea or guide? (i "just" want to acces my Click from the Tablet via WLAN so I can use the 3G-Connection of my Click to surf the net on my Tablet.)
Thanks in advance!

Wireless tether for root works fine for me.
Install the app, run the app, grant su permissions, click for tether and find AP you've created. If you cannot find your AP(tattoo) just wait some time.

i somehow don't get it.
I firstly enable APN (data/3g) connection on my phone and ensure, i can access the internet. then i start the app. (should i activate Wifi on the phone?)
I used Wireless Tether for Root users (2x version 2.X and also the exp. v.3.0 pre11), i just start the app on the phone, disable encribtion (should i care?), check the ssid-name (tried renaming or default), checked the cannel (used 1,7 and 10) and just click that wifi-icon to start.
the phone sais, it's on. then on my tablet (2.1), i just go to settings/wlan/advanced -> set ON and search for AP's, but my phone is not listed.
Did I forget something?

well, just installed the current version of the rom, and everything works fine.
EXCEPT... tethering. I use the version from the marked, used enc. or disabled it, my PC (win 7 x64) found my click, but my android-tablet still did not find it. why?

Re
i faced the same problem, by default settings.
However enabling "Wifi'Encryption" from menu, to WEP-128bit (with default password: abcd .. ) worked.

Hi,
I use "Wireless Tether for Root Users" from the Market and it works fine. By the way I tried it on several different ROMs including CM7_RC2.2 (Gingerbread) and Fyodor's AOSP (Froyo).
Are you enabling Wi-Fi on your phone? You need your regular 3G connection + Wifi enabled. Then launch the application and click the big wifi icon in the middle.
Perhaps you can try CM7 ROM, maybe you current ROM is somehow not compatible.
Regards,

[Q] - 3G connection

Hi!
In this week i had a problem:
When i try to make a 3G data connection, i see a error message:
"Dialed:
Cannot connect for an unknow reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according yo your manufacturer's documentation and try again."
I'm using the last energy rom! The problem persist with Stock rom.
When i use my SIM on other phone, 3G works fine!

[Q][HELP]Using wifi and mobile data at same time

I have a 5.0.2 lollipop rom (latest fusion rom ver.5.1 build) . I have the problem whenever I connected to my home-wifi an it has no connection to the internet, I can't send commands to my htpc with kodi installed.
I checked my wifi connection with the Fing app. It says "No wifi connection,check our...", but the statusbar and the quicksettings tittle says I'm connectet to the wifi (with the "!").
I like to use my mobile date connection and the wifi connection at the same time (only when the wifi has no internet connection), to send commands to my kodi or access files from my server.
Is this a bug of the rom I using or is this the standard behavior of android.
Can I change this behavior?
(I found a script. My question for the script. 1.Can I use this for S4 and what shold be changed(I think the adapter names. Where can I find the names of the adapters). 2. Is there a (tasker) method to check if I have internet thru wifi or mobile when connected to wifi?)
I hope u can understand my problem.
Thx MartelKombat