well, i have the KalimochoAz v10.12 /2.3-rom on my rooted Click. (i know, there are now newer versions, but this is ok for now) and a Haipad M701 (chinese android 2.1-7"-Tablet, rooted) i'd like to use the data (apn/3g) connectrion from my phone to use internet on my pda via wlan.
If i understood everything right, that's what tethering is. I also installed 2 apps (Barnacle Wifi tether and wireless tether) on my phone. I think, i did everything that is set-able, but when i swicht on wlan on my pad, i don't see my SSID i gave for my click.
Anyone got an idea or guide? (i "just" want to acces my Click from the Tablet via WLAN so I can use the 3G-Connection of my Click to surf the net on my Tablet.)
Thanks in advance!
Wireless tether for root works fine for me.
Install the app, run the app, grant su permissions, click for tether and find AP you've created. If you cannot find your AP(tattoo) just wait some time.
i somehow don't get it.
I firstly enable APN (data/3g) connection on my phone and ensure, i can access the internet. then i start the app. (should i activate Wifi on the phone?)
I used Wireless Tether for Root users (2x version 2.X and also the exp. v.3.0 pre11), i just start the app on the phone, disable encribtion (should i care?), check the ssid-name (tried renaming or default), checked the cannel (used 1,7 and 10) and just click that wifi-icon to start.
the phone sais, it's on. then on my tablet (2.1), i just go to settings/wlan/advanced -> set ON and search for AP's, but my phone is not listed.
Did I forget something?
well, just installed the current version of the rom, and everything works fine.
EXCEPT... tethering. I use the version from the marked, used enc. or disabled it, my PC (win 7 x64) found my click, but my android-tablet still did not find it. why?
Re
i faced the same problem, by default settings.
However enabling "Wifi'Encryption" from menu, to WEP-128bit (with default password: abcd .. ) worked.
Hi,
I use "Wireless Tether for Root Users" from the Market and it works fine. By the way I tried it on several different ROMs including CM7_RC2.2 (Gingerbread) and Fyodor's AOSP (Froyo).
Are you enabling Wi-Fi on your phone? You need your regular 3G connection + Wifi enabled. Then launch the application and click the big wifi icon in the middle.
Perhaps you can try CM7 ROM, maybe you current ROM is somehow not compatible.
Regards,
Related
I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English
hey thanks man
maybe u will find a fix for derefas sd card fix too?
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?
MobileMini said:
Or the Windows Mobile rom used?
After trying the Android images, I had a lot of GPS issues under WinMo (not working anymore). At the end it was fixed, but could it be that the WinMo roms can be of influence on Android?
Click to expand...
Click to collapse
I start to believe is this...i'm gonna use use Stock ROM and i will keep you posted if it will be any changes
nsourm has a dualbootloader in his ROM
Maybe its better to boot Android not from "within" WinMo.
Can someone test that?
codiak said:
Does not work for me. The zImage and Module are exactly the same files I use.
The Problem ist not the htcUPCTLoader.exe process.
tzacapaca send me his working 2.2. image and it still dont work for me.
The reason must be something else...
Perhaps bootloader or startup.txt?
Click to expand...
Click to collapse
In my case the prob was "htcUPCTLoader.exe" it was not allowing deamon to start..so i had to kill it and then run the run.bat file....
Can u try it this way..??..connecting the Mini with pc..running run.bat...after that killing htcUPCTLoader.exe process in task manager..and then running run.bat file again..??.... it might work....if not..then there's no harm done
I dont need to try. The kernel module file (*.ko) in the image is updated. So the problem (at least for me) is not adb push. must be something different.
Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.
The only thing I changed was adding in the run.bat
Code:
taskkill / F / IM htcUPCTLoader.exe
On beginning of everything, to finish the process before starting the adb. I haven't touched anything of the files zImage and adb.exe
http://www.megaupload.com/?d=3NKI5Z0U
This is my system (android 2.2) running Wifi.
Sak_1 said:
I have no permissions to publish to HD Mini ROM Development, published the solution here.
I have the solution to put wifi in Android 2.2 of Schlunds, the problem is in the process "htcUPCTLoader.exe" not allowed to continue with the process.
The assignment of IP must be static, do not get the IP automatically
Here I leave kernel with the new install
TESTED ONLY WITH ANDROID 2.2 Schlunds
Sorry for my bad English
Click to expand...
Click to collapse
Thank you for all you've done! Unfortunately,it didn't work on my mini. (my windows rom is 1.38). Still,thank you!
JAntrobus said:
Codiak, your not alone. I am also not able to turn WiFi on. Do you get Error when you go to the settings to turn it on? It's like its not picking up the WiFi on the mobile.
Click to expand...
Click to collapse
Its the same behavior as the fixed module was not installed.
If you tab Wifi, it just grays out and do nothing. No error message.
See, im on the standard ROM. And no matter what I try, I get the same.
Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
codiak said:
Ok, so it not seem to be WiMo ROM related. I use a custom one.
So my last idea is the bootloader (haret)...
Click to expand...
Click to collapse
i dont think anyone touched haret after cotulla patched it for mini
seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
It worked, mine no longer displays as error. But I dont have any WiFi's to connect to as im also at work. But it looks much more promising.
Just we need to start looking into getting the battery reconised by Android, having to go into Windows to charge my phone.
seppe82 said:
Okay everybody, I noticed something:
I could patch the bcm4329.ko file, after android booted. Now you have to restart android in order to enable wlan. Often it happend to me, that an error in the android wifi settings showed up. So I went back to windows mobile and checked my wifi setting there.
As I've also encountered the GPS problem, where one had to switch GPS on and off again in android to make it work in windows again I also tried it with wlan. Before I run haret, I switched off wlan in windows. Now android was able to initialize and start wlan.
Also it was not possible for me to enable wifi, if the usb cable was still connected to the phone before the first successful operation of wlan. Afterwards it surprisingly also worked with a connected cable. Since I'm at work now, I can not test wlan itself, as it is only possible to connect via DCHP here. This evening I'll try to do so with a static IP.
By the way, this dynamic vs. static IP thing is a common problem in froyo. You'll find a lot of discussions in the internet for other devices like samsung galaxy and so on.
Click to expand...
Click to collapse
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out
codiak said:
Dont work for me My Wifi in WiMo was allready off. I changed it to on and booted Android = no luck. Rebooted to WiMo and disabled Wifi and booted Android again = no luck.
Did you get a error message before while switchig wifi on in android? I do not get a message. it just grays out
Click to expand...
Click to collapse
Unfortunately there wasn't any precise error message. As you said it only was greyed out with "Fehler" (error) written below the wlan switch. It's strange that there still isn't any solution working for everyone.
For me, no "Fehler" came up. Just grayed out. Same behavior like I never applied the patched module. But i can see the patched .ko file in the phone
I´m using tzacapaca patched ext2 file that works for him...
hey..it can't run in my phone x8, pls help...
i had root it (2.1 version)
after i click "start", a text show me that "it sharing my network"
at first time, my ipod/computer can search "barnacle", but it cannot connect to my 2G
i tried to reinstall the barnacle wifi tether, then, my ipod/computer haven't found "barnacle"..........
i tried to reinstall my x8, same problem occur.........
ps. my english is not good-,-thx for read
pls help~~~~~~~/_\
Tether not works on x8 because of hw limitations
Sent from my X8 using XDA App
It works on my X8, do not use WEP key
se_gila said:
It works on my X8, do not use WEP key
Click to expand...
Click to collapse
i haven't use wep key...
wt is yr x8 version?
when i updated, it cannot run..../_\
my version is E51i ( 2.1 update1 ) (M76XX-TSNCJOLYM-53404015 ) ( 2.6.29 [email protected]#1 ) ( 2.1.1.A.0.6)
it works on my x8 im using minicm(http://forum.xda-developers.com/showthread.php?t=964223) , i would use access control making you need to tick a box on your device on the clients tab before that device gets internet. WEP does work but as i find you can't use letters in the password only numbers.
Oups !
Sorry
I have barnacle wifi tether work on miniCM nobodyatall but it does not work on CM7-65 racht... Using the same setting and method but so far no luck...
mamafuck1 said:
hey..it can't run in my phone x8, pls help...
i had root it (2.1 version)
after i click "start", a text show me that "it sharing my network"
at first time, my ipod/computer can search "barnacle", but it cannot connect to my 2G
i tried to reinstall the barnacle wifi tether, then, my ipod/computer haven't found "barnacle"..........
i tried to reinstall my x8, same problem occur.........
Click to expand...
Click to collapse
Mine is work. Anyway, sometimes it takes time to connect with my macbook, but it works fine. I'm using SROM V2 based on minicm (froyo).
can u tell me yr phone's detail?
version etc.
my phone's detail is ...
E51i
2.1 update1
M76XX-TSNCJOLYM-53404015
2.6.29 [email protected]#1
2.1.1.A.0.6
i really really want to share my wifi to my ipod...>_<"
hope be help........
I remember read it somewhere that version 2.1 and 2.2 can use Barnacle WiFi tether but not on version 2.3
Sent from my X8 using XDA App
deani77 said:
I remember read it somewhere that version 2.1 and 2.2 can use Barnacle WiFi tether but not on version 2.3
Sent from my X8 using XDA App
Click to expand...
Click to collapse
i've only used it on stock 2.1, miniCM and froyobread haven't tried a 2.3 ROM so can't comment but 2.1 and 2.2 work.
I also can't get my X8 working with Barnacle. Its an E51i running official (rooted) 2.1 update 1 build 2.1.1.A.0.6 My netbook PC is running windows 7 starter.
Barnacle installs okay and when started the PC sees the nework but gets stuck 'identifying barnacle' and says no network access.
I've found a load of info regarding the X10 elsewhere on this forum:
For the phone:
1. Install Barnacle
2. Make sure wifi is off then open the app, push the menu button and select "settings"
3. Scroll to the bottom, click the DHCP
4. Click "DNS 1 (optional)" and set it to 8.8.8.8 (as stated on page 1 of this post)
5. Push the back button
6. Click on the "WAN" and set it to "rmnet0" (without quotes)
7. Click on the "LAN" and set it to "athwlan0" (without quotes)
DO NOT PUSH THE "START" BUTTON
Thats it for the phone side but if you want to do some extras, you can change the "port" in the NAT section and "gateway" in the DHCP section.
For the PC:
If you know how to view your connections, skip to step 3.
Windows XP Users:
(I'm on my Win7 netbook at work using the x10 wifi as we speak, not XP, so ill try to get this correct)
1. Click the "Start" button (or press the windows key), click on Control Panel
2. Click on "Network Connections"
For Vista/7 Users:
1. Click the "Start" button (or press the windows key)
2. Type "view network connectons" (no quotes) and press enter when it stops loading
For All Users:
3. Right click on your wireless connection and click "Properties"
4. In the box towards the middle of the Properties you should see "Internet Protocol Version 4 (TCP/IPv4)", double click it to open its properties
5. At the bottom, click the "Use the following DNS server addresses:" and set it to 8.8.8.8 (to match the phone)
6. Click "Ok" on both Property windows
Thats it. You should now be able to click the "Start" in the Barnacle app and connect. If your still not getting internet but are connected to the phone with your pc's wifi, run thru the steps again for the PC but while being connected.
Click to expand...
Click to collapse
But I can't get any combo of these settings to work on my X8 and I haven't been able to find any real answers in this or other X8 specific threads. So can anyone provide some step-by-step noob-proof instructions, like those above but for the X8?
um okay ignore my previous post - I left my phone switched off for a few minutes and rebooted it and barnacle is working fine. I used the settings as outlined above, with a five-character WEP key
Sparks1337 said:
um okay ignore my previous post - I left my phone switched off for a few minutes and rebooted it and barnacle is working fine. I used the settings as outlined above, with a five-character WEP key
Click to expand...
Click to collapse
ths, i am trying yr method,,,hope can help!_!
um....do you have set yr pc???
i want to connect to my ipod touch....and i don't know how to set with my ipod....
God! look at those neons at topic "WITH THAT UGLY CAPS LOCK", and I can't say it's better than your name...
As a user said before, tether doesn't work natively due to kernel limitations, with problems as yours I would advice to test another rom, or Full wipe / Fix permissions in xrec.
Sparks1337 said:
I also can't get my X8 working with Barnacle. Its an E51i running official (rooted) 2.1 update 1 build 2.1.1.A.0.6 My netbook PC is running windows 7 starter.
Barnacle installs okay and when started the PC sees the nework but gets stuck 'identifying barnacle' and says no network access.
I've found a load of info regarding the X10 elsewhere on this forum:
But I can't get any combo of these settings to work on my X8 and I haven't been able to find any real answers in this or other X8 specific threads. So can anyone provide some step-by-step noob-proof instructions, like those above but for the X8?
Click to expand...
Click to collapse
7. Click on the "LAN" and set it to "athwlan0" (without quotes)
in this step....i have some problems
when i click Start, it show:
Data network is ready
.int file prepared
WIFI: driver loaded
WIFI: Could not set address of athwlan0 No such device
DHCP: Could not get address of athwlan0: No such device
WIFI: Could not get flags of athwlan0: No such device
NAT: waiting for local Interface
Stopped unexpectedly!
AFAIK tether is only working with android 2.2 or above
I have used Barnacle on 2.1 droid and with 13 char WEP only letters.
I have problems with it on 2.2 ROMs tho... problems with connecting to the ad-hoc its creating.
works for me in CM 1.0.0/1.0.1, and FB... have set a 10-char WEP key. not sure if this helps but make sure your WiFi is OFF when u launch barnacle
Hi,
Is there any way to enable or hack in the advanced IPSEC VPN option on stock firmware for S2? I really need to be able to define Aggressive mode VPN in order to connect to PFSense but... even 2.3.4 Sammy firmware does not have it.
Also, did anyone ever manage to get OpenVPN running with stock 2.3.4 FW? I could never get it to work. Rooting, installation (via OpenVPN Installer) goes fine, then even connection can be established but routes to remote networks are not propagated.
Thanks!
This guide teaches you to reverse tether your Android phone via WiFi. That is, it allows you to use your Ethernet connection of PC on your Android phone. It is useful for those who do not have WiFi routers and data connection. So if you have unlimited data plan for your computer, why not share the connection with your phone?
I am not the developer of the files supplied
Requirements:-
1.Rooted Phone
2.Wifi enabled Laptop or PC
3.Root explorer or any other application which gives system access
4.File in the attachement
Procedure :-
Phone:
Download Wpa_supplicant.zip and extract "wpa_supplicant" from it, save it on your SD card.
Open Root Explorer, and grant it superuser access when asked for.
Navigate to system -> bin and long press on wpa_supplicant; Select copy, and paste the file into any folder on your SD card.
Now navigate to the file you downloaded, copy it in same way, and paste it back to system -> bin. Note, you might need to mount the system as R/W instead of R/O by pressing a button on the top just before pasting the file.
Reboot.
▬▬Ubuntu (Must work for other Linux Distros too)▬▬:
Open Network Connections
Goto Wireless tab, select add, and set the following:
SSID:
Mode: Ad hoc
Leave other things unchanged, and go to Ipv4 settings tab
Set method to Shared to other computers
Go to Wireless security tab and set Security to WEP 40/128 bit key and set key to a numeric password (or hexadecimal one).
Check the connect automatically box on top of the tabs and press Save.
Your Android phone must now detect this network, and you can establish the connection by using your security key.
▬▬Windows XP, Vista, 7▬▬
Download and Install Connectify from www . connectify.me/download-lite/
Start Connectify Hotspot by giving a name and password to your hotspot and selecting the Ethernet connection to share. Make sure the security type is WEP or Open.
Disable your firewall (Simply adding it to exceptions doesn't work for AVG at least)
Now your phone should be able to see the hotspot and establish the connection using the password set.
Known Issues :
1.Random disconnections (Very less frequency)
2.Disconnections due to screen lock / sleep on laptop
3.For me Security mode does not works
HIT THANKS IF IT WORKED
ENJOY
Download the file here :-
http://db.tt/FdAVwebJ
If someone want mirror then post
Using this method you can download everything
From apps on Play Store to Media hosting websites link
Post your Review
Reserved for future update
@avilove4u
This is not a free solution , you need a wifi Pc (90 % of computers at work don't have wifi) and is too complicate for users.
Use my method : http://forum.xda-developers.com/showthread.php?t=1371345
It's a "One click free solution using USB cable" (no need to install other paids tools)
Not yet perfect, but still under development (I am the developper)
"This is a crap , as u cannot do much !"
Please stay on your thread next time before posting such kind of message on my thread.
No need to press "Thanks".
Ha ha lol !
Ur method has certain limitations :banghead:
Now adays every laptop and PC are wifi enabled !
I heard that connectify doesn't require root phone and we don't need that wpa_suplicant.
kurotsugi said:
I heard that connectify doesn't require root phone and we don't need that wpa_suplicant.
Click to expand...
Click to collapse
You heard correct (in most cases). If your device already supports ad-hoc network connections, then all you'd need to do is set up the hotspot with Connectify (or Virtual Router) and connect to it. Otherwise, this method's for you.
kurotsugi said:
I heard that connectify doesn't require root phone and we don't need that wpa_suplicant.
Click to expand...
Click to collapse
But some armv6 devices need that
Without wpa ad-hoc network wil nt be shown in our device
And to get access to system/bin to replace wpa ur device must be rooted na ?
avilove4u said:
And to get access to system/bin to replace wpa ur device must be rooted na ?
Click to expand...
Click to collapse
that doesn't necessary. we can push the file via update.zip
Yeah that's true too
VERY GOOD AND USEFULL GUIDE!!
I've successfully shared the LAN's network of my notebook (DELL) with my android tablet (Mediacom 852i with OMA ROM JB 4.1.1)
Thank you very much for sharing your information.
capslock66 said:
90 % of computers at work don't have wifi
Click to expand...
Click to collapse
[citation needed]
I'm pretty sure you're completely wrong. You're whole post sounds like it comes from a jealous, whiny little girl. And until you can back up this statement, I'm going to assume you are either a liar or an idiot.
Useful app especially for area with bad reception and no wifi.
Sent from my GT-I9100 using xda app-developers app
Avilove.Cullen said:
And to get access to system/bin to replace wpa ur device must be rooted na ?
Click to expand...
Click to collapse
no rooting, no software installation
http://forum.xda-developers.com/showthread.php?t=1133641
This is sooo useful...thank you.
I think my wifi router had broken a couple of hours ago. But now I can use ad-hoc connection from my PC.
I use Huawei Ideos S7 to connect to my windows XP sp3 wifi.
I have a 5.0.2 lollipop rom (latest fusion rom ver.5.1 build) . I have the problem whenever I connected to my home-wifi an it has no connection to the internet, I can't send commands to my htpc with kodi installed.
I checked my wifi connection with the Fing app. It says "No wifi connection,check our...", but the statusbar and the quicksettings tittle says I'm connectet to the wifi (with the "!").
I like to use my mobile date connection and the wifi connection at the same time (only when the wifi has no internet connection), to send commands to my kodi or access files from my server.
Is this a bug of the rom I using or is this the standard behavior of android.
Can I change this behavior?
(I found a script. My question for the script. 1.Can I use this for S4 and what shold be changed(I think the adapter names. Where can I find the names of the adapters). 2. Is there a (tasker) method to check if I have internet thru wifi or mobile when connected to wifi?)
I hope u can understand my problem.
Thx MartelKombat