I managed to flash a stock rom back, because i wanted to go to another ROM now. I have HSPL 2.08. installed and now i want to install MAGLDR 1.13. However, if i make activesync connection and i let the MAGLDR program install, the HD2 goes to bootloader, then shows the installation loading screen for half a second and then just goes back to bootloader. I just cant get MAGLDR installed and so i cant use my device, i really need help because I dont have a backup device, help plz!
HD2 Toolkit 4.2.0.1;
http://www.mediafire.com/?2qz0xa7xfxney47
Radio ROM 2.15.50.14;
http://www.mediafire.com/?1th8o158r2t6dba
And your Android ROM.....
This is use for NAND Android ROM installation.
First of all, Format your SDCARD like FAT32 with your PC . you must create over your sdcard ext3 or ext4 partition area size of 1Gb with a partition tool. Copy your Android ROM inside the FAT32 partition. Then insert it to your HTC.
If you have EU model HTC HD2 can continue.
1. Setup HD2 Toolkit in your PC(Win7) and start it.
2. Close your phone completly.
3. Push "Volume Down" button and "Call Off" button same time until your phone shows you 4 different colored screen. You must check if your HSPL is 2.08.HSPL.
4. Plug your phone to PC, and see "Serial" to "USB" sign.
5. HD2 Toolkit is our assistance. Push the "Task29" button and go on. it will fomat your phone. You must push the "Volume Down" button when you see %100 on the screen and wait until you see 4 colored screen. Of course you must check again "USB" sign.
6. Now, Unzip "Radio 2.15..zip" on your desktop, then you will have 2 files. Launch DAF.exe with Administrator rights using your right click.. Go on and push the "Volume Down" button when you see %100 on the screen and wait until you see 4 colored screen. check again "USB" sign.
7. Push the HD2 Toolkit "magldr" button and go on. Don't touch any thing this time, when it finished, it will open up with magldr.
8. Use volume up down button and select "4 USB Flash" mode with "Call answer" button. When you see on the screen "USB Flash......USB" then choose "System Partition Size (MAGLDR)=custom" and write "cache size (in MB)=5" (or whatever) left side on the HD2 Toolkit and push the "Repartition" button. Write correct partition number(for example 200). (some rom has 5/200/5.. it shows that (CWM size = 5MB/System size = 200MB/Cache size = 5MB)) and go on...
9. Reboot your HTC Device. When magldr screen show up, select "AD Recovery" with volume down-up, push the "Call Answer" button.
10. Select the "install zip file" and select "install zip from sdcard" and choose your rom and go on.
that's all..
Niekzb said:
I managed to flash a stock rom back, because i wanted to go to another ROM now. I have HSPL 2.08. installed and now i want to install MAGLDR 1.13. However, if i make activesync connection and i let the MAGLDR program install, the HD2 goes to bootloader, then shows the installation loading screen for half a second and then just goes back to bootloader. I just cant get MAGLDR installed and so i cant use my device, i really need help because I dont have a backup device, help plz!
Click to expand...
Click to collapse
To install MAGLDR, you must enter the tri-clour screen(bootloader).
1. Turn off your phone
2. While keeping the voloume down button pressed, turn it on. (Dont let the volume down button go until you see the tri-colour screen)
3. Then connect the phone to the pc via usb
4. Make sure the activesync connects.
5. The "serial" on the bootloader will change to "usb"(this part is on your phone)
6. Now flash MAGLDR
Hope it helps
Really appreciate the help but look, when i try Task 29 or anything else that needs the bootloader, it says USB in the bootloader screen, and i also hear the sound when you connect a usb to you windows pc. But then when I open task 29 i get connection errors. I am sure i have HSPL 2.08. I get connection errors with everything I try to flash; stock rom, task 29, magldr...
Have you ever try to run Task29 with "run as Administrator", or you should stop your antivirus.
or...
You can try to replace your driver with this one..
Google Android Drivers
http://d-h.st/jIk
Just tried all that, didnt work. Also task 29 cant make connection for some reason while USB is on the screen in bootloader..
But for some reason i did manage to flash the radio..
NVM, for some reason i just worked! thanks for the help!
i didn't do anything but i can just accept "thanks" button
well, if you could help me just 1 more time.. haha. Now when i try to install recovery with the DAF file, the USB Flasher mode just freezes.. cant flash it. what now?!
man,I think that one of your drivers may be effecting your HTC Driver. Don't touch anything when DAF is running.
mmmm.. your cable may be broken, don't touch it when in progress..
Or you must reboot your computer, sometimes it works.
Will try now, be right back !
Nope, didnt work.. closed as much processes as i could but still nothing.. getting desperate, dont have a phone tomorrow if I cant get it to work. Isnt there a way to install recovery without flasher mode? any other ideas?
sorry man.. check your "ActiveSync". and i don't have another idea..
You can try to install from SD card
Related
WM6.5 on my HD2 (from T-Mobile europe) has finally bothered me enough to decide to change the rom entirely, to android (NAND). I saw the instructions/video tutorial by techburrow (including the magldr v 1.11) and thought that it wouldn't give me too much troubles.
Before starting, I checked my ROM to see if it was recent enough. I as well installed hspl v 2.08 (as shown after taking battery out/in and using volume down + startbutton, in the rgbw screen).
After that I (think I) successfully installed MAGLDR v 1.11. It showed the comment that my phone was now "hacked".
I then went on to the most important step in the process, actually loading android. In the instructions for DFT_Android is states that:
" For installation you need enter MAGLDR (hold power button during boot)"
I tried getting into bootloader by holding the power button, I tried pressing it once and then holding it. Neither worked, both ended up with the HTC logo screen.
All I can do now is choose between getting the HTC logo and the rgbw screen showing hspl 2.08.
Hard reset also doesn't work, probably because MAGLDR deleted the original rom. Connecting through USB via the rgbw screen doesnt work, the connection is not recognised.
Other thread look similar problem, but haven't helped so far. Only the most recent are about others trying to get the android on NAND with MAGLDR 1.11 and DFT-Android.
HELP? Anybody has any idea on how I can install android any ROM now, how to get into the bootloader, how to use my HD2 again?
Looks like Magldr was not flash into the phone. Reflash magldr.
Sent from my HTC HD2 using XDA App
unfortunately
Thx for the suggestion, xhanay. However, reflashing MAGLDR requires an activesync connection and/or USB connection via HSPL (only way my phone does anything). Cannot get any connection unfortunately. So no reflashing.
Any other suggestions? (reflashing via microSD?)
help!i have the really same problem!thx!
This is what I do:
1. Remove the battery, put it back
2. Hold VolDown key pressed while turn on the phone to enter Bootloader (tricolored screen)
3. Connect it to PC and wait for connection to change to USB
4. Flash radio 2.15.50.14
5. Hold VolDown key pressed after reboot to enter bootloader again.
6. Flash MAGLDR
7. Reboot
8. Hold Power button pressed > Select USB flasher ...
....and flash Android/Windows 7.
If USB connection is not recognized I suggest flashing a stock ROM using SD card.
See instructions here, chapter 3 - Flashing Via MicroSD Card
could just work
Thank you for the quick response. Hopefully I will make it all the way to step 8+ (with android and all apps coming along with it). Otherwise using the stock rom should help. Thx for the link.
Will let you know if it works.
Also post in the right section in the future
All worked. I had to reflash a custom ROM through the rgbw screen (apparently a custom ROM did synchronise via USB even though activesync didnt show anything). Then I reinstalled MAGLDR (which immediately sent me through to the bootlader screen). After I had some issues loading android (had to tag USB on in Activesync connection settings, make the connection, the tag USB off in the connection settings)... Now Android is running as I hoped it would. Great work and thanx to all that helped.
ps: Will try to use the right section next time. No promises that it will then be the right one however.
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
dixieuk101 said:
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
Click to expand...
Click to collapse
you could try .... than just plug-it in using activesync and run HSPL3... do not install it...before installing it will put ur phone in bootloader....than exit HSPL3 keep your phone pluged in and just flash wtever....radio,rom...etc....
OR
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear
load the hard SPL than magledr than rom it works 100%
Same Problem!!!
Hey i have the same problem. Recently I bought this phone off of craigslist. The phone goes to the DFT screen and its on aMAGDLR v1.11. I tried to reset it but it doesnt go to the multi colored screen. I bought a new micro sd but that didnt work. It also cant connect to my computer. There isnt wrong with the charging port because the light goes on when its connected. PLEASE HELP?! I cant go into bloatloader. Is it bricked?
Hi,
I had used HD2ToolKit4.2.0.1.zip and use Wipe option given in the bottom left.
Regards
my volume key not work and now i cant use the bootloader,please
hey anybody here??????????????
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
Click to expand...
Click to collapse
did you do this with right order?
http://forum.xda-developers.com/showpost.php?p=27057672&postcount=127
Hey people
i have magldr 1.11 installed now i want to put in 1.13 but i cant do that
i have win7 on my PC and when i try to install 1.13 i only have de tricolor screen and cant update
i turn off the phone and press -vol and power on and only boot tricolor screen
can anbody help me?
tks
you need to describe the problem better.
You can flash magldr from bootloader, so long as you have hspl, but I can't tell from your question whether you have tried yet.
Put phone into bootloader, connect to usb.
What spl does it say?
does it say usb at bottom of screen? if no, have you plugged the usb cable in?
when you run the magldr romupdateutility does it giove an error? is it a timeout error or a different error?
are you trying to do it through a front panel USB port? or a usb hub? if so (and try this anyway) when it times out, just run it again, if it times out again, then change ports and run it again,
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
mateuspt said:
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
Click to expand...
Click to collapse
ok let's try to be more clear on this.
first, have you done the HSPL? Following that, did you put magldr 1.11 on there? now if you can answer yes to both these questions, the steps are easy.
1. press -vol and power until you get the tri-colored screen. in there, you should see hspl 2.08 with cotulla in the upper portion.
2. if so, then you plug in the USB cord and you will see "serial" change to "USB" (assuming of course you have activsync installed and waiting on a connection)
3. when it links up, then you run magldr1.13 installer... once successful, the phone should reboot.
simple as that
done.
thanks now i have 1.13 but now how i install another version of nand android?
when i boot up with vol- and power only shows tricolor screen
first you need flash cwr 1.3 ,for that you need reboot your phone to magldr via hold power button until magldr menu upears.After that select usb flasher via vol down and green button (call button) confirm.And after that you can flash anything nand android by usb flasher in magldr or cwr.
when i reboot phone it goes to magldr booter without choice it goes for my actual version cant choose anything
You must hold power button untill menu apears!
magldr 1.11 to 1.13
I'm trying to update from magldr 1.11 to 1.13 but every time I run the ROM update utility I get "Error [260]: Connection" & "the Update Utility cannot connect to your PDA phone." I have the tri-color bootloader screen, as well as USB on it. I'm already running a NAND Froyo build, just trying to switch to Gingerbread. I've tried searching this forum & the web for help without any success. Any help would be appreciated, thanks!
Angelo
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
samsamuel said:
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
Click to expand...
Click to collapse
That did the trick! Thanks so much for your help.
Angelo
Task29 maybe can help you!
I just bought an HD2 with windows phone 7 already installed. The guy i bought it from said that the phone came like that from the previous owner.
From what I can tell, windows phone 7 has been flashed to the nand/internal memory.
Can someone point me in the direction of where to look to remove this OS so that I can install the other wonderful Rom's developed for the HD2 (android, meego, etc)?
I've been looking around but i'm a little lost.
Thanks!
Personally i would seriously consider taking the HD2 back to its stock defaults and then work forward, the problem of using someone elses work is that you dont actually learn anything, which is what this commuinity is all about
So if you want my advice do an SD card flash of a stock ROM for your device
first things first, go to HTCs website
http://www.htc.com/europe/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
grab yourself a stock ROM (if you have a 1024MB version of the HD2 then be careful!)
extract the file you downloaded, use winrar or 7zip
- Take the "RUU_signed.nbh" and copy it to a blank SD card .
- Rename it to "leoimg.nbh"
- put that SD card in the HD2
- Reset the device while pressing the volume down button.
- Follow directions
that should perform an SD card flash, meaning it will remove absolutely everything and start from scratch, ie Windows Mobile
you can then decide what you want to install and go from there
as a rule the process is HSPL>RADIO>(MAGLDR)>ROM
http://forum.xda-developers.com/showthread.php?t=914924
has some general guides
but as a rule you should really just do to the thread of your chosen OS, that should have some stickys on how to do things and dont forget the wiki!
Thanks for your reply!
I seem to be stuck, when i hold "volume down + power" I get into this:
aMAGLDR V1.12
Boot Menu
1.Boot WPH
2.Boot AD SD
3.Boot AD NAND
4.USB Mass Stg
5.USB Flasher
6. USB TTY
7. AD Hardreset
8.Tetris
9.Servies
10. Reset
11. Powerdown
Can I flash the 6.5 Rom from here?
aludus said:
Thanks for your reply!
I seem to be stuck, when i hold "volume down + power" I get into this:
aMAGLDR V1.12
Boot Menu
1.Boot WPH
2.Boot AD SD
3.Boot AD NAND
4.USB Mass Stg
5.USB Flasher
6. USB TTY
7. AD Hardreset
8.Tetris
9.Servies
10. Reset
11. Powerdown
Can I flash the 6.5 Rom from here?
Click to expand...
Click to collapse
nope!
your holding down the power button arent you?
take out the battery
hold the vol DOWN key
put the battery in (keep holding down vol down)
then "tap" power button (push and let go) the phone will vibrate a bit
keep holding down the vol down key until the tri colour screen comes on, if you copied the .nbh file and renamed it too your SD card it "should" allow you to install it
i tried it to it stays on red green blue white serial.
i have installed win7 but want to loose it
aludus said:
Thanks for your reply!
I seem to be stuck, when i hold "volume down + power" I get into this:
aMAGLDR V1.12
Boot Menu
1.Boot WPH
2.Boot AD SD
3.Boot AD NAND
4.USB Mass Stg
5.USB Flasher
6. USB TTY
7. AD Hardreset
8.Tetris
9.Servies
10. Reset
11. Powerdown
Can I flash the 6.5 Rom from here?
Click to expand...
Click to collapse
afraid not !!
and are you sure you held down the volume down button before pressing the power key !!
cos if you did....i am sorry to say...but yes...i had this issue in the past where i was not at all able to go into the bootloader..the one with the 3 color screen !!
tried everything...finally succeeded !! in case you have this issue...i shall tell you how i was finally able to get into bootloader and flash a stock/custom ROM.
ruthlessboy said:
i tried it to it stays on red green blue white serial.
i have installed win7 but want to loose it
Click to expand...
Click to collapse
yea...so once when you are on the 3 color screen why dont you simply go ahead connect your USB and flash a custom ROM ???
or if you want stock...copy the .nbh file in your SD Card...and the flashing will start automatically...get it ???
Whats your reason for wasnting to remove WP7?
I personally think its better than most roms, and a about tied with the energy rom.
try flashing Yukis V5 and you might prefer WP7
no connection
backlashsid said:
afraid not !!
and are you sure you held down the volume down button before pressing the power key !!
cos if you did....i am sorry to say...but yes...i had this issue in the past where i was not at all able to go into the bootloader..the one with the 3 color screen !!
tried everything...finally succeeded !! in case you have this issue...i shall tell you how i was finally able to get into bootloader and flash a stock/custom ROM.
yea...so once when you are on the 3 color screen why dont you simply go ahead connect your USB and flash a custom ROM ???
or if you want stock...copy the .nbh file in your SD Card...and the flashing will start automatically...get it ???
Click to expand...
Click to collapse
i did all of that but when it comes to flashing it stays on zero and wont flash giving an error
Is there anyone willing to help me about instaling NAND android ?
Specific this one
http://forum.xda-developers.com/showpost.php?p=18313782
.
I have HSPL4 and thats everything i know. If there is anyone willing to help me step by step i would apreciate it cause i fail everytime I try. Thanks
The steps are on the first post of that page:
MAGLDR Install Manual:
•Download archive with the MAGLDR loader and Recovery from here than unpack its content.
•Connect PDA in bootloader mode ("mattress") and run LeoAdvancedRUU.exe from MAGLDR folder
•Wait for PDA reboot and clamp a key "Power". Connect PDA with cable to PC
•Install the driver if the PC doesn't see a PDA connected (download from here)
•Wait for PDA reboot and get to the MAGLDR menu . Choose point “USB Flasher” by arrows and press the call button "Green button"
•Run DAF.exe from MAGLDR_Recovery folder
•Wait for PDA reboot and get to the MAGLDR menu . Choose point “AD Recovery” by arrows and press the call button "Green button"
•Choose point "Install zip from sdcard" by arrows and next "Choose zip from sdcard", choose our archive with firmware (the firmware should be thrown preliminary on a sdcard) and press a call button "Green button"
•After the installation finishes get to the menu again. Press a key "Back" and choose point "Reboot system now".
•The PDA will reboot and the Android will be started. The first start a bit longer then usual
If you've already installed Magldr and recovery, then all you have to do is get the .zip for your Android build onto your SD card and then follow the rest of the steps above to install zip from sdcard.
It's a remarkably easy process.
I enter boot mode pressing down when powering ? will there be any problem cause i have HSPL4. Friend told me its not possible to do with HSPL4
I did the thing with advanced leo ruu and now its stuck on white HTC screen on power on :S
When you get to tri-color screen, does it list HSPL as 2.08?
anseio said:
When you get to tri-color screen, does it list HSPL as 2.08?
Click to expand...
Click to collapse
It says SPL-3.03.HSPL. Do u have skype or something i really need to fix it tonight
Adittion : I am trying to flash factory Win now downloaded from HTC site. Hope it helps
Cjovecje! said:
It says SPL-3.03.HSPL. Do u have skype or something i really need to fix it tonight
Adittion : I am trying to flash factory Win now downloaded from HTC site. Hope it helps
Click to expand...
Click to collapse
Reflashing factory ROM won't change HSPL. A quick search shows that you need to go back to stock SPL, then up to HSPL 2.08
http://forum.xda-developers.com/showthread.php?t=611433
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
That thread is actually a good place to post your problem, since it's still quite active and SPL/HSPL are in the way of you getting things flashed correctly.
It's possible to flash HPL 2.08 without uninstalling 3.03.
I've already tried it without any problem
Do u have skype msn or any familirar stuff ? I would like to have u online when I try to do that ?
Sorry, I don't have any hands-on experience with what you need to do. I only know the concept. :\
which rom should i use?? and guide please
thank u
i am new so pls help
k first i recommend you use hyperdroid, typhoon, or if you want a sense rom then energy rom...i use hyperdroid(my sig) roms link:http://forum.xda-developers.com/forumdisplay.php?f=928
read a tutorial first!
u need: hspl 4 to unlock phone, 2.15.50 radio, magdlr 1.13, and cwm recovery and the rom you want to run.
1. put your phone in bootloader mode ( while phone is powered down hold volume down and power button) and it will take you to a tri colour screen.
2.with your phone plugged in, it will look and search for the htc drivers and your phone will say usb on the bottom, and when it says that, run the HSPL.exe file you downloaded. this will hack your phone.
3. as soon as your phone reboots hold the volume down and power button to put it back in the tri colour screen. now install the 2.15. radio you downloaded by running the custom ruu, and this will install it for you.
4. now once again, once it completes put your phone into tri coulour screen again, and run magdlr. This will install magdlr for you as well, the bootloader that will replace the original. this is whats going to get you into nand android, or wp7 etc.
5. once thats done phone will reboot, and now it will reboot into magdlr. from here on, you will have to put your phone into usb flasher mode. the phone will install other usb drivers once you do that.
6. once thats done, while on usb flasher mode, install the recovery you downloaded, and using the dft installer, will install the recovery. follow the instructions ins the recovery flasher.
7. when thats down, in magdlr go into ad recovery, and this will put you into the Android recovery.
8. using your volume rocker, go down to mounts/storage, and mount usb/storage, and transfer your rom over to ur sd card.
9. unmount and go into "install zip from sd card." and choose the rom you just transferred. this will take a few minutes, just let it sit till it finishes.
10. once complete go into reboot phone. enjoy
Notes: on first boot, usually it will take a litle longer just sit and be paitent.
Make sure you download the rom that fits your phone ( tmobile version, or EU)
if i helped just hit the thanks button and u can pm me if u have any prob
thank you i will try that later
Nice elaboration walidhazem
Imo, don't go for sense roms, because the newer ones (3.0+) eat up your RAM and the phone become unusable with 100Mb Idle...