Related
I have couple of scratches on my touch pro screen.when the device is on the scratches are like rainbow colors really visible.If I change the touch screen (not the whole lcd screen) that will fix my problem right? Did any1 do this?
ummm i think when u meant by "rainbow colors" then ure gonna have to replace the WHOLE LCD screen, cuz more than likely its from the LCD screen, and i dont think the touch screen and LCD screen are 2 parts...i think theyre just one...not sure, but try to look on ebay OR idk if u have warranty on it u can probably call in HTC about it...
This is what I think will fix the scratches
Code:
[CODE]http://mobile1.brando.com.hk/prod_detail.php?prod_id=03976&dept_id=088&cat_id=0695
Code:
Much cheaper
For Digitizer Module for T-Mobile MDA Vario IV Touch Diamond
http://www.dealextreme.com/details.dx/sku.20648
For HTC Diamond
http://www.dealextreme.com/details.dx/sku.20647
I don't know if it fit the same as Touch Pro or Fuze, but read the spec
I have difficult time finding a How to replace digitizer video.
Any help?
Thanks
radoste said:
I have difficult time finding a How to replace digitizer video.
Any help?
Thanks
Click to expand...
Click to collapse
Maybe this can help.Its a How to remove cameras from touch pro with pictures
Code:
http://www.mediafire.com/file/h2mmwetxnij/HTC%20Touch%20Pro%20-%20Camera%20removal%20photo%20guide%20v1.1%20by%20A%20Mak.pdf
I saw that. It does not show how to remove the screen.
Why would you want to remove the camera?
radoste said:
I saw that. It does not show how to remove the screen.
Why would you want to remove the camera?
Click to expand...
Click to collapse
I wouldnt, thats just the only touch pro take apart that I found with pictures
mikechannon.net is a good place to start. But if you are looking to replace the digitizer only, you won't find it there. It's a bad move anyway. I tried that, cracked my lcd and end-up buying the whole lcd like this.
All I can tell you are my mistakes.... lol....
- never peel of the digitizer. it will ruin it.
- never try to remove the lcd with cutter blade. this is how i cracked it (stupid me and still regret it)
- between the lcd and the digitizer there is a thick, clear double tape like glue. i came across some information about this somewhere (forget where...). one said you should heat the glue first (don't know how to apply this without affecting the lcd) . other one said have to use dental floss.
So, there you go.
HTC Touch Pro- LCD & Digitizer replacement instuctions
Hi everyone. I have SCOURGED the internet looking for some kind of decent instructions to replace the LCD & Digitizer screen on my HTC Touch Pro (Sprint) phone with the new set I purchased from Hong Kong. Mike Shannon's site does NOT give directions for this specific area.
I have seen you all talking about needing to do the same thing and wonder if anyone has done it? And do you have any directions to help me?
I've had this part for a month now, and can't find any directions to do it! My dog chewed it, and the touch works, but the screen is half black now. I read it is easier/less risky to replace both lcd and digitizer, which I went ahead and purchased them both with the tools, now I just need to find something decent (instructions) to have help replacing it.
thanks to anyone who can step up to help me, I'm frustrated beyond all comprehension, and now feel I may as well ditch the phone if I can't find a way to replace it. Or maybe you know someone I could send it off to? Everyone wants to charge a couple hundred bucks sending it in to them!
to the appling heat ...u can try putting it in a ziploc bag and boiling it ...and for the instructions this is the best i can do for u http://store.payloadz.com/str-asp-i...nance_Manual_eBooks_Technical-end-detail.html
im pretty sure after all ur fustration 8 dollars wont kill u ...and im pretty sure the condensation from the boiling wont hurt
and i found a free one hope it helps http://www.htcdriver.com/index.php?page=htc-raphael
it's a long trip, in russian, to get to the lcd
http://www.pdacenter.ru/razborka/htc-touch-pro/
You can use Google translate on it. It seems that the hardest component to get to is the lcd. I also bought the digitizer, since my lcd is fine. I'll post a follow-up if I go for it.
Any luck getting the touch screen off and new one on?
I bought a touch screen and digitizer as separate items. I wish I had known that some kind of clear adhesive is supposed to be between them.
A) What happens if you don't use this adhesive?
B) Has anyone successfully replaced the screen/digitizer with replacements on the fuze or touch pro?
Anyone having luck?
Has anyone actually figured out how to install this? I just got what was supposed to be a replacement LCD+digitizer. they shipped the pieces seperate, so I can't understand how to put them together, since HTC seems to only list the part as one piece and there are no instructions or videos anywhere that indicate how to install them as seperate pieces, or get them to connect.
Dont do it!!
Ok, I just recently bought a parts phone on here (a Fuze) and was "just going to replace the digitizer" (Authors laughs, then cries at statement)
Ok, yes you can replace the digitizer without replacing the screen, BUT they tell you to use an oven (you can buy one from HTC they make it available to their techs, so you need someone that can get that for you). If you do not make sure that ALL of the glue is loose prior to taking the digitizer off you will split the LCD.
It is much simpler to get either a parts phone or a screen and digitizer and replace the part. I had to replace my digitizer as the touch function did not work. You can find older project phones in the market section. If you figure the cost of a parts phone (plus you have extra parts if anything else goes out) vs. if you buy a digitizer, then rip a part of the LCD because all of the glue was not disolved, and have to buy either a parts phone or a new phone anyway you will be way ahead of the game.
There are a number of good resources on here as to how to disassemble and reassemble the fuze.
I WOULD NOT RECOMMEND TRYING TO REPLACE THE DIGITIZER ALONE IF YOU HAVE NOT BEEN TRAINED OR HAVE THE PROPER EQUIPMENT - unless you need a reason to sell your spouse on why you need a new phone. "Honey, I tried my hardest to fix it, but I guess it is really broke now, I'm gonna have to get an HD2"
If you have any questions about the process let me know I am always more than happy to help.
http://www.mikechannon.net/PDF%20Manuals/HTC%20Raphael_SM_A10%20_GENERIC__01%20Dec%20
pkwhisker said:
Mike Shannon's site does NOT give directions for this specific area.
Click to expand...
Click to collapse
Yes, indeed, mike channon does offer a very detailed service manual for the raphael.
Replacing the display on the HTC Touch Pro (Raphael): Some Tips
Replacing the display on the HTC Touch Pro
How To - Tips
1. Collect information
a. Find the Service Manual HTC Touch Pro (Raphael) on Mike Channons's site, the Raphael wiki or you could Google for it. File name is "HTC Raphael_SM_A10 _GENERIC__01 Dec 08.pdf".
Take a look at the disassembly and assembly chapters of the Service Manual.
The following two lists may be helpful.
---
List 1: types and quantities of screws
[SPL no., P/N, pages of Service Manual, description, quantity used in Raphael]
10. 72H01893-00M (see p. 34), black (middle length), 2x
11. 72H02450-00M (see p. 32, 34, 30), black (shortest type), 7x
12. 72H02474-00M (p. 37), black (longest type), 4x
13. 72H02689-00M (p. 30), metal, 4x
26. 72H02865-00M (p. 35), metal, 6x
27. 72H02886-00M (p. 35), 1x torque screw for M/B, 1x
---
List 2: kinds of tape/fabric used in the Raphael
a. Conductive fabric
Self adhesive conductive fabric, parts 14-24 on the SPL. The adhesive backside is also conductive.
b. Mylar
A specific kind of polyethylenetereftalaat (PET) used for electical insulation.
c. Kapton tape
Kapton is a polyimide film which can remain stable in a wide range of temperatures. (electrical insulation)
d. EMI gasket
EMI shields are implemented in a design to isolate one component or section of a device from another.
e. Double sided tape
---
b. Movies of the disassembly process can be found on YouTube for the HTC Diamond.
The Diamond does not have an integrated keyboard, so it is a bit different, but it is good enough to get an idea of the process.
The information on how to replace the screen itself is not found in the service manual.
c. Study the last few stages of the HTC Touch Pro page on pdacenter.ru
(Translate the page into English using Google.)
The display is attached to the metal frame by 4 small pieces of double sided tape.
3. Get some tools
a. Phillips (cross head) screwdriver size 00x50
The right size is 00. The length, 50mm, is less important.
There is one torque screw in the Raphael (SPL no. 27), but it can easily be handled by a normal screwdriver.
b. Plastic stick (to open the case)
The standard plastic stick I had ordered was actually too big. The one I made myself was smaller and proved to be better.
c. Other tools
I did not use these, but if you plan to do more than one it would be a good idea to use the
- plastic tweezers
- ESD wrist wrap
- rubber gloves
4. Buy a display with touch screen attached to it
You could buy the touch screen and the display separately, but I could not find any information on putting them together. Avoid problems by buying these already attached.
5. Replace the display
a. Disassemble following the Service Manual, leaving the M/B unit in order.
Be careful not to break the small speaker cords. Do not move them too much because they are very fragile.
Be sure to keep every piece of tape safe for reassembly. Buying new tape can be quite expensive.
b. For the last stages, follow the instructions from pdacenter.ru.
Press the old display gently out of the metal frame. Move the pieces of double sided tape from the old to the new display, and fit the new one into the metal frame.
c. Reassemble following the Service Manual.
Good luck!
What will fit what?
Will the lcd and digitizer from a sprint version work on an alltel version(ppc-6850)? Or is there another lcd and digitizer that i can use? Im back to the old berry 8703 and its killing me.
spammer said:
if you just find scratches on the surface, then you just need to change the touch screen digitizer. the soldering is requested when you fit it.
But of course, if you buy the one that lcd and touch screen fit together one, then no soldering request.
Anyway, soldering is not such difficult if you has the tool.
thanks
Click to expand...
Click to collapse
I don't see any soldering involved there. The digitizer is fitted with thin lines of some kind of glue or kit around the edges. I have not seen any documentation on it though.
ingmardb said:
I don't see any soldering involved there. The digitizer is fitted with thin lines of some kind of glue or kit around the edges. I have not seen any documentation on it though.
Click to expand...
Click to collapse
you can look at the connect flex cable part of your touch screen and the lcd, you will find they are soldered together. Of course , if you don't soldering it together, it will also work, but not as good as after soldering.
Dear all,
anybody already experienced a broken touch screen?
My Leo fell from 50cm to the ground (tiles), just on the edge. The sound it hit the ground already let me knew - bad suprise...
If you have already some experiences with broken screens: Is there a way to repair it? Is it be affordable?
The device itself seems to work as usual. Even in the upper right corner, the sensitivity seems fair. But I fear a breaking screen as already some glassy bits drissel out...
Thx for tipps
TC
i belive its called digitizer on most touch screens.
not sure if HD2 has different technology.
but the LCD screen is separate from the touchscreen part(thats what you broke)
search ebay for HTC HD2 digitizer
heres the ebay link i bought a camera LCD display from them few times
http://compare.ebay.com/like/220603...fb0fe93&itemid=220603974499&ff4=263602_263632
http://electronics.howstuffworks.com/ipod-touch2.htm
Hey dude,
Check out this thread
forum.xda-developers.com/showthread.php?t=613954&page=20
I broke my glass on my screen and ordered a new digitizer, stripped it apart, broke the LCD in the process (a common occurrence as the glass/LCD glue is STRONG), ordered a new LCD, repaired and it works.. didn't quite go back together as it started (slight gap in case, buttons don't come through as much as they used to). Now have the problem of the 'bubble wrap' showing on the screen in a few places.
In short, yes it can be done but if you want it doing right get a professional to do it..
Any one else with there own experiences?
heat it up so the glue is soft and comes off easier, between the screen and digitizer.
if you have sun leave it in the sun to get it up to good temperature.
safest way since it will not get too hot where it melts.
There was some talk about the buttons on the HD2 going bad due to much use on android ROM. Was wondering if Evo digitizer will fit/work on HD2? That would get rid of the possibility of buttons going bad.
To engineer that would be SIGNIFICANTLY harder than just buying the part for the buttons on the HD2 and installing it. Phone parts are not interchangable and if you've ever opened one up you would know the answer to your own question. The talk about button problems on the HD2 is over exaggerated. First you don't know what the people are doing that are starting those discussions - how hard are they with their phones, etc. The keys in most phones are pressure contact switches - they are designed to perform for years of normal use not used by a gorilla or someone who isn't exercisiing care.
I've owned HTC phones like the TYTN I for a number of years and used the hard keys - very similar contact switches - never a problem. The same for the 2125 which was a Windows phone with hard keys only. They were very small and I used the phone for two years every day. Keys did not wear out and they felt about the same as when I bought it.
Don't worry about it for at least two years of general use. Even when using Android you can get widgets that mimic soft keys (ie. the back/windows key).
Stim, thanks for your thoughts. I purchased a HD2 with a broken digitizer and replaced it so was wondering if the digitizer on the EVO would work since they are the same size. I did get a chance yesterday to see a pic on the internet for the EVO digitizer and the ribbon on the EVO for the capacitive buttons and digitizer does not look compatible size wise on the HD2.
I've never had buttons go out on any of my phones before. With all the talk of the buttons going bad I thought maybe it was a quality issue with the HD2.
wendellc said:
There was some talk about the buttons on the HD2 going bad due to much use on android ROM. Was wondering if Evo digitizer will fit/work on HD2? That would get rid of the possibility of buttons going bad.
Click to expand...
Click to collapse
I might be completely stupid here, but what does the screen/digitizer have to do with hardware buttons?
I thought the digitizer is just the touch sensor of the screen, and that the hardware buttons have their own button pads/switches (whatever they're called).
Now, if you were talking about capacitive "hardware" buttons (such as the ones found on many Android devices, like the Nexus1), I can see how the digitizer would come into play.
while on subject of digitizer of hd2, does anyone know how to replace it?
I recently dropped my phone on the ground and even though i had a scratch resistant film over it i broke the glass digitizer, phone digitizer work 100 fine but i would like to replace it, honestly i got lucky that i did not damage the lcd screen under the digitizer, i have priced replace ment part at about 60 with tools to fix it, i would just like advise to get repairs done
Actually you aren't so lucky. There are plenty of threads on this issue. Replacing the digitizer and lcd as separate components is nearly impossible without damaging the lcd. Hate to be the bearer of bad news. Separating the glass from the LCD is nearly impossible. They are glued together and air sealed. Some have tried and failed by either destroying the lcd or making the phone inoperable. HTC either heat seals the two together or uses a special adhesive. In either case unless you are working in a class clean room (no dust) getting specs, skin or hair more than likely and you will be really ticked off to find that crap in there when you go and turn the phone on. Mike Channon's website used to post official (semi) HTC maintenance guides but the HD2 hasn't been posted. There are however a couple of Russian links that go through the process. The HTC guides were much better and they listed the steps, torx settings, oven temps etc..
I've seen a few on eBay - new but there seems to be some that need to be soldered and others that don't.
My suggestion is buy a complete unit if you have to or sell it damaged on eBay and get another phone.
i can also buy a lcd and digitizer together to eliminate the hassel of having to seperate them, and install componients like that, only downer is prices avererage 100-120 dollars, would that be a good option? i have seen videos on youtube on how to go about replacement, im quite knowledgeable about wire work and sodering but do u think im getting in over my head by tring to do this repair?
i know buying a used hd2 is about 575 and it only goes up from there, i just dont have that kind of cash right now, plus my phone is unlocked, has hard spl, running nand android flashed directly to phone, with att service fully working, something very few owners have accomplished with there hd2's..
Some searches...
Digitizer:
http://www.amazon.com/Original-Digitizer-HTC-HD2-Replacement/dp/B001V7W3M4
Housing + Display + Digitizer + Battery Package
http://www.amazon.com/FACEPLATE-TOUCHSCREEN-DIGITIZER-REPLACEMENT-HTC/dp/B004FE1FLU
I notice the hardware buttons are not included. My phone is fine except the hardware buttons were scratched up after suffering a hard fall.
I don't know. I've done complete overhauls on TYTN I and TYTN II's. They didn't require heating to remove the panels - they just snapped in. Phones were very modular no work involved except screw removal. The latest phones seem to be held together with some sort of adhesive. I remember looking at how to disassemble a FUZE. Major pain to remove the screen from the keypad - required an oven to melt the glue.
Look for a complete quide that shows step by step disassembly AND assembly. Sometimes they forget the tricks to put it back together and you get messed up.
The 150 for the housing seems a little steep. But most of the LCD/DIGITIZERS are at least 100. Be careful about some of the parts they are stripped from a "working" phone - doubt it - why would someone take a perfectly good phone and break it apart for the parts? Doesn't make sense - they can get more money for the complete unit. Sounds like they were defects or seconds - screens may have dead pixels or spots. I'd look for factory fresh new stuff personally. You can buy the keypad/keys separately on eBay for next to nothing.
stim141 said:
I don't know. I've done complete overhauls on TYTN I and TYTN II's. They didn't require heating to remove the panels - they just snapped in.
Click to expand...
Click to collapse
The digitizer is the glass that you touch when operating the phone. The LCD panel is the part that shows the pictures. The digitizer covers the LCD and both are sealed together. The TYTN series of phones did not have this.
The OP was concerned about replacing the digitizer without harming the LCD. I know from experience that this is very hard to do. I managed to get them apart and replaced the digitizer on my HD2, only to damage a single line in the LCD when I re-assembled the phone. It was a complete waste of time and money.
stim141 said:
The 150 for the housing seems a little steep. But most of the LCD/DIGITIZERS are at least 100. Be careful about some of the parts they are stripped from a "working" phone - doubt it - why would someone take a perfectly good phone and break it apart for the parts? Doesn't make sense - they can get more money for the complete unit. Sounds like they were defects or seconds - screens may have dead pixels or spots. I'd look for factory fresh new stuff personally. You can buy the keypad/keys separately on eBay for next to nothing.
Click to expand...
Click to collapse
Actually, the housings sold 3rd party are usually factory fresh, unless specified otherwise. HTC expects to have techs replace various parts of the phones and ordered a certain percentage of these types of parts. When the initial sell drive dies down, the excess is unloaded to 3rd parties who either offer them up on sites like eBay or catalog them for companies that repair phones.
well like i was saying would it be easyer to buy both the digitizer and lcd already together and just replace the ones in my phone?
So, I know where to get the parts I need, I'm just having trouble finding instructions on how to get the job done. Anyone know of any resources I might be missing as to finding out how to replace the glass screen of a Droid 2?
http://www.ifixit.com/Device/Motorola_Droid_2
As far as parts, look at ebay. You may want to look into a full LCD plus digitizer replacement as when you separate the screen from the digitizer, there is a gasket that gets undone from one half of the phone, and it is easier for dust to get under the digitizer unless you replace this as well. Also make sure you know what you are doing, phone repair requires a steady hand, good nerves and a little bit of time.
Ok, I'm a complete idiot and let my Nexus 7 fall and now I have a hairline crack. At first I thought it would be fine, since it is a very fine crack - almost unnoticeable, and the Nexus didn't even turn off. The screen looks fine but, alas, the touchscreen is not. I get no response at all. This does not appear to be the first time this has happened (a quick search on Ebay turns up several damaged Nexuses being sold for the exact same reason - A shame no-one is selling a damaged one which still had a working screen).
My question is (since I know you cannot simply replace the touchscreen elements, you have to replace the whole screen which is probably not worth the time and effort compared to buying a new one) is it possible that the touchscreen controls came loose or something such that it could be fixed, or is it tied into the screen so since I have an image it must mean that the digitizer is ruined. I hope something can be done, especially since something similar happened to my Galaxy Note a month ago and it has a shattered screen (way worse than the Nexus) but it's touchscreen still works just fine (maybe someone should keep me away from tech, this keeps happening...). Or do I have to accept my fate and lay my Nexus to rest.
Ekreed said:
Ok, I'm a complete idiot and let my Nexus 7 fall and now I have a hairline crack. At first I thought it would be fine, since it is a very fine crack - almost unnoticeable, and the Nexus didn't even turn off. The screen looks fine but, alas, the touchscreen is not. I get no response at all. This does not appear to be the first time this has happened (a quick search on Ebay turns up several damaged Nexuses being sold for the exact same reason - A shame no-one is selling a damaged one which still had a working screen).
My question is (since I know you cannot simply replace the touchscreen elements, you have to replace the whole screen which is probably not worth the time and effort compared to buying a new one) is it possible that the touchscreen controls came loose or something such that it could be fixed, or is it tied into the screen so since I have an image it must mean that the digitizer is ruined. I hope something can be done, especially since something similar happened to my Galaxy Note a month ago and it has a shattered screen (way worse than the Nexus) but it's touchscreen still works just fine (maybe someone should keep me away from tech, this keeps happening...). Or do I have to accept my fate and lay my Nexus to rest.
Click to expand...
Click to collapse
Corning FIT Glass is a new product that is rather interesting. It's a much thinner section of glass with high scratch resistance and is pretty strong in respect to it's thickness/thinness. A product spec sheet shows it close to but not the same as Gorilla Glass and likely due to the thinness in comparison, but deffinetly superior to the standard Soda-Lime Glass formula used by many.
The key features of Fit is that the digitizer and glass are bonded together and is then bonded to the display for an complete "airless" display. I'm suprised Google doesn't make more of this as the Kindle Fire HD is making a big deal about their display tech. Pretty much the only difference is the display "cemented" to the back of the Corning Fit Glass/Digitizer product.
So when it all works, it provides a display result and responsiveness you didn't experience with the older technologies.
BUT.. When it does break, the digitizer being directly bonded to the glass is also broken. So you see the trade off for the new technology. No air gaps between the components prevents the possibility of a screen protector to "hold it together" and allow you to still use it even after the display is broken. So once broken, the display is useless. I believe the technology is sound, but the application used by ASUS in the manufacturing of their tablet may be exposing the edge of the display as that seems to be called out in the spec sheet. I'd push ASUS support hard on this as a manufacturing defect and try to get a replacement.
Some examples of the technology:
Specs: http://www.corning.com/WorkArea/showcontent.aspx?id=43401
Comparison to discrete glass technologies (including Gorilla Glass).
http://www.corning.com/specialtymaterials/products_capabilities/iox/ioxvsdiscrete.aspx