Related
hey guys i have attached pictures of my g1's broken screen. First it was just from the top that was unnoticeable now it has spread to the other end take a look. Everything works fine, the touch is working perfectly everywhere on the screen. are there chances that this crack will grow further? i dont think repair parts are available right now ..what do you guys think?
http://img14.imageshack.us/img14/8046/dsc05476vk5.jpg
http://img22.imageshack.us/img22/563/dsc05477yf0.jpg
http://img12.imageshack.us/img12/2802/dsc05478ly8.jpg
http://img14.imageshack.us/img14/7278/dsc05480ry7.jpg
helo? anyone?
http://www.cellulardr.com/products.php?cat=513
is this screen will continue to work for a long time?are there chances of further cracks? which part of screen is this? digitizer?
r4yd3n said:
hey guys i have attached pictures of my g1's broken screen. First it was just from the top that was unnoticeable now it has spread to the other end take a look. Everything works fine, the touch is working perfectly everywhere on the screen. are there chances that this crack will grow further? i dont think repair parts are available right now ..what do you guys think?
http://img14.imageshack.us/img14/8046/dsc05476vk5.jpg
http://img22.imageshack.us/img22/563/dsc05477yf0.jpg
http://img12.imageshack.us/img12/2802/dsc05478ly8.jpg
http://img14.imageshack.us/img14/7278/dsc05480ry7.jpg
Click to expand...
Click to collapse
looks like your digitizer is broken.
however in the link that Dharkaron had posted (http://www.cellulardr.com/products.php?cat=513), there is replacement screen for around $180, it should contain digitizer in it, but i would check before purchase.
if thats a digitizer only, it should not spread, but you are in risk of damaging your lcd display. (not really relevant if you cant get digitizer by itself though)
Sorry but it looks more like your protection sheet is broken try to take that of maybe it will help ;-)
screen protector u mean? no its not tht I checked tht already how can the protector break its not solid ...so digitizer for $180 that expensive I rather wait for some time and get a new one
well, its the whole screen for 180, but it does not say that it does come with digitizer, so it actually maybe wiyhout one, that is why i would check, digitizer for my old sony was around 100 and it was only digitizer, without lcd, so i would wait and see if you can find digitizer by itself (as long as it is actually separate part and not integrated somehow with lcd...) good luck on your hunt.
@WvaanWaas
screeen protector, as like piece of elastic transparent film broken that way? very unlikely my friend.
r4yd3n said:
is this screen will continue to work for a long time?are there chances of further cracks?
Click to expand...
Click to collapse
There is no way to tell how long it will work. Could work for a day, could work for a year. Chances of further cracks? There is always a chance a crack will get bigger as it's subjected to day to day use. Also, please don't bump your own post, especially after less than a day of waiting. We have lives and don't sit here just to answer people's questions.
This link is just the digitizer, like i said prices seem high to me.
http://www.cellulardr.com/G1FaceplateDigitizerBlk.htm
Just saw this, might be all you need if the touchscreen still works on your phone.
http://www.cellulardr.com/G1FaceplateBlk.htm
ok i am confused..the broken screen of my g1 is it digitizer or the faceplate? my touch screen is perfect like before even on the cracked part it works like it used to do...i cant feel the crack probably because of the screen protector..if thts the faceplate then its gud
r4yd3n said:
ok i am confused..the broken screen of my g1 is it digitizer or the faceplate? my touch screen is perfect like before even on the cracked part it works like it used to do...i cant feel the crack probably because of the screen protector..if thts the faceplate then its gud
Click to expand...
Click to collapse
it is digitizer also known as touch screen, faceplate thats whats around (black frame) digitizer/touchscreen is not there, and that is what failed in yours. digitizer/touch screen.
this will not fix the problem: http://www.cellulardr.com/G1FaceplateBlk.htm
this will work: http://www.cellulardr.com/G1FaceplateDigitizerBlk.htm
I think I will continue to use it and wait for some time till I can find cheap digitizer
he3r0 said:
looks like your digitizer is broken.
however in the link that Dharkaron had posted (http://www.cellulardr.com/products.php?cat=513), there is replacement screen for around $180, it should contain digitizer in it, but i would check before purchase.
if thats a digitizer only, it should not spread, but you are in risk of damaging your lcd display. (not really relevant if you cant get digitizer by itself though)
Click to expand...
Click to collapse
It's pretty clear according to the description on Cellulardr that the LCD and the Touch screen digitizer are separate products. The digitizer is about 190$.
Part #: G1FaceplateDigitizerBlk
Manufacturer: HTC
SKU: LS032B7LX01
T-Mobile G1 Google Front Faceplate BLACK with Digitizer Touchscreen Lens
HTC Tmobile Android G1 Faceplate with Window Lens Touch Screen Glass and Flex Cable
Front Window Lens Glass is included
Price: $189.95
r4yd3n said:
hey guys i have attached pictures of my g1's broken screen. First it was just from the top that was unnoticeable now it has spread to the other end take a look. Everything works fine, the touch is working perfectly everywhere on the screen. are there chances that this crack will grow further? i dont think repair parts are available right now ..what do you guys think?
http://img14.imageshack.us/img14/8046/dsc05476vk5.jpg
http://img22.imageshack.us/img22/563/dsc05477yf0.jpg
http://img12.imageshack.us/img12/2802/dsc05478ly8.jpg
http://img14.imageshack.us/img14/7278/dsc05480ry7.jpg
Click to expand...
Click to collapse
The glass of the digitizer is broken my friend. Your screen protector should be intact. The LCD should most likely be intact but there no way of telling it 100% by looking at those pictures even though they were good. It doesn't look that bad but it will most likely get worse. Just use gently contact and do not press the screen. You may notice that the digitizer may not respond exactly like before but pretty good. Now there's a bigger risk your LCD will get broke as well if it is subject to heavy pressure.
Dharkaron said:
Just saw this, might be all you need if the touchscreen still works on your phone.
http://www.cellulardr.com/G1FaceplateBlk.htm
Click to expand...
Click to collapse
r4yd3n said:
ok i am confused..the broken screen of my g1 is it digitizer or the faceplate? my touch screen is perfect like before even on the cracked part it works like it used to do...i cant feel the crack probably because of the screen protector..if thts the faceplate then its gud
Click to expand...
Click to collapse
No the faceplate is just the plastic frame around/above the digitizer. You need the digitizer. Unfortunately CellularDR doesn't sell the digitizer itself but instead they have package of the faceplate+digitizer. That part including many others are out of stock looking at their site.
r4yd3n -> I don't know where you live but if you live in the US or Canada you should be able to order repair parts however if I were you I would send it in. Remember, Cellulardr have strict rules of not shipping outside USA and Canada (Confirmed in email) except probably if you're an american/canadian working overseas.
well the touch screen is still working like before I am surprised ...no effect of broken digitizer on the touch screen
meh
I broke my screen christmas eve
http://androidcommunity.com/forums/members/dzknockout/albums/mine/1605-phone.jpg
(Still fully funtional)
I say leave it till its necessary to get a new one. And rather than buy replacement parts for an arm and a leg, you can send it back to t-mobile for like $110 (provided you have insurance. But honestly, a broken screen isn't that big a deal if it's fully funtional. And my screen is way more f*cked up than yours
ohh yea urz is way too much cracked then my screen ...ok so I will continue to use it and wait for something better.
Good News Google G1 Digitizer Only Now available
Good news guys I just noticed that www.cellulardr.com now sells the Tmobile Google G1 Window Lens with Digitizer only at a lower price: http://www.cellulardr.com/G1Digitizer.htm
They don't have a picture yet so just to be sure I called them and confirmed that this is the correct part. Basically this is the Window Lens Glass with the Touch Screen Digitizer and has the Flex Cable attached to it. It does not include the LCD but I understand that most people that have broken their phone, have only damaged this part.
Hope this helps you guys.
P.S. They told me that they have a limited quantity in stock so if you really need it, jump on it.
To make a long story short:
I must have somehow put too much pressure on the digitizer to create a "newton ring" which in turn would not allow me to use the touch feature of the digitizer. I sent it to HTC USA to repair it. They noticed the "newton ring" as well as the modified ROM
They would not warranty the "newton ring" and said they would not repair the Digitizer due to the fact that it had been "hacked". They would replace the Digitizer, LCD and internals for $389.00. I told them they were smoking crack.
After paying HTC $25.00 for doing nothing they sent the phone back and I went online to order a Digitizer. I paid $17.00 which included shipping and I got it within 7 days.
The HTC service manual does not have a guide on how to replace the digitizer or the LCD. They really don't want you messing with it.
It was scary and I thought I had ruined the phone when I pryed the front of the unit open. At first the sticker to the digitizer came off(black framing) and then you have to pry the digitizer(its pretty stiff) from the frame. I destroyed the thin cable that led to the backside of the LCD but the new one has one already attached so I wasn't worried about that part. The LCD with a metal base plate is attached to the back of it. You have to slowly pry off the LCD from the backside of the digitizer.
Anyways I have assembled it back and everything is working perfectly. It was doing Micro-Surgery at times.
Just wanted to share my story.
Congratulations!!
mrmomoman said:
To make a long story short:
I must have somehow put too much pressure on the digitizer to create a "newton ring" which in turn would not allow me to use the touch feature of the digitizer. I sent it to HTC USA to repair it. They noticed the "newton ring" as well as the modified ROM
They would not warranty the "newton ring" and said they would not repair the Digitizer due to the fact that it had been "hacked". They would replace the Digitizer, LCD and internals for $389.00. I told them they were smoking crack.
After paying HTC $25.00 for doing nothing they sent the phone back and I went online to order a Digitizer. I paid $17.00 which included shipping and I got it within 7 days.
The HTC service manual does not have a guide on how to replace the digitizer or the LCD. They really don't want you messing with it.
It was scary and I thought I had ruined the phone when I pryed the front of the unit open. At first the sticker to the digitizer came off(black framing) and then you have to pry the digitizer(its pretty stiff) from the frame. I destroyed the thin cable that led to the backside of the LCD but the new one has one already attached so I wasn't worried about that part. The LCD with a metal base plate is attached to the back of it. You have to slowly pry off the LCD from the backside of the digitizer.
Anyways I have assembled it back and everything is working perfectly. It was doing Micro-Surgery at times.
Just wanted to share my story.
Click to expand...
Click to collapse
How did you attach the digitizer to the LCD? Aren't they glued together or something like that?
Because that's where my attempt went terribly wrong: Instead of getting the digitizer off my LCD, I broke my LCD... I bought a new complete screen unit because I didn't know how the LCD is attached to the digitizer!
The digitizer is semi-glued to the LCD panel which sits on the back along with the thin metal cover. The digitizer has a thin flat connector that connects to the back of the main board on the bottom. I slowly pryed off the LCD(grayish white in color) from the back of the Digitizer. It came off and I aligned it back up with the new digitizer and the glue residue left over from the LCD adhered to the rear of the new Digitizer. the tricky part is the thin connectors that attach to the mainboard. You have to get a pair of tweezers to pull it from the flat connector. When you get the digitizer you will see the new connector. Attaching that and the prying of the LCD was the hard part.
I read somewhere some guy said he broke the LCD but in truth it wasn't the LCD that he broke. He pryed apart the 3 layers of the Digitizer and thought he ruined the LCD. I thought the same thing orignally then I when the whole LCD/Digitizer was in my hand I was looking realized that the LCD was the grayish/white panel on the back. One can easily peel away the top 2 layers of the digitizer and would think that it could be the LCD they ruined.
I hope that makes sense. It was the first time I did this and I didn't see the video where someone removed the Screen. I only saw the Russian guy who didn't finish the job because he was stuck at the end. I just figured it out the hard way.
Also the T6 works but I think a t5 would be better. I only had a T6 and it did the job.
I am so glad I wore gloves or I would have had some major finger prints all over the unit
mrmomoman said:
The digitizer is semi-glued to the LCD panel which sits on the back along with the thin metal cover. The digitizer has a thin flat connector that connects to the back of the main board on the bottom. I slowly pryed off the LCD(grayish white in color) from the back of the Digitizer. It came off and I aligned it back up with the new digitizer and the glue residue left over from the LCD adhered to the rear of the new Digitizer. the tricky part is the thin connectors that attach to the mainboard. You have to get a pair of tweezers to pull it from the flat connector. When you get the digitizer you will see the new connector. Attaching that and the prying of the LCD was the hard part.
I read somewhere some guy said he broke the LCD but in truth it wasn't the LCD that he broke. He pryed apart the 3 layers of the Digitizer and thought he ruined the LCD. I thought the same thing orignally then I when the whole LCD/Digitizer was in my hand I was looking realized that the LCD was the grayish/white panel on the back. One can easily peel away the top 2 layers of the digitizer and would think that it could be the LCD they ruined.
I hope that makes sense. It was the first time I did this and I didn't see the video where someone removed the Screen. I only saw the Russian guy who didn't finish the job because he was stuck at the end. I just figured it out the hard way.
Also the T6 works but I think a t5 would be better. I only had a T6 and it did the job.
I am so glad I wore gloves or I would have had some major finger prints all over the unit
Click to expand...
Click to collapse
Thank you for your explanation! But I'm still not going to attempt this on my own any time soon... We'll see... Maybe I'll change my mind if my digitizer is broken or scratched...
Respect man! You mentioned that you bought digitizer for $17. Is it possible to buy mainboard for Touch HD from that place? Can you please advise where I can get it. And how much it will be?
Got to love a bit of micro-electronics DIY!
This just shows that HTC are taking people for a ride - there are a lot of people who would have just paid the price they stated. As you've only replaced the digitizer, shows they were taking the mick with the LCD and otherwise, what are these "internals" that HTC said it needed I wonder...??
Just replaced the digitizer on my HD and it took about 1.5hrs. As long as you're very careful, it's not that hard at all.
Make sure you have the Service Manual though as it was a great help.
Have you got the link for the service manual?
Ive just had to order a Digitizer as my phone has decided it doesnt want to work anymore (6 months to go on contract too ffs).
Managed to get one from a UK seller with tools for £17 so im happy.
KickAssMoves said:
Have you got the link for the service manual?
Click to expand...
Click to collapse
It's in the wiki.
WelshWarior said:
Just replaced the digitizer on my HD and it took about 1.5hrs. As long as you're very careful, it's not that hard at all.
Make sure you have the Service Manual though as it was a great help.
Click to expand...
Click to collapse
Hi:
How did you get the digitizer separated from the LCD?
I was thinking of putting two suction cups (1 on the back of the LCD, and the other on the front of the digitizer), heating everything up for a couple of minutes with a heat gun, and then pulling them apart holding the suction cups.
Does that make sense?
Thanks.
mrmomoman said:
To make a long story short:
I must have somehow put too much pressure on the digitizer to create a "newton ring" which in turn would not allow me to use the touch feature of the digitizer. I sent it to HTC USA to repair it. They noticed the "newton ring" as well as the modified ROM
They would not warranty the "newton ring" and said they would not repair the Digitizer due to the fact that it had been "hacked". They would replace the Digitizer, LCD and internals for $389.00. I told them they were smoking crack.
After paying HTC $25.00 for doing nothing they sent the phone back and I went online to order a Digitizer. I paid $17.00 which included shipping and I got it within 7 days.
The HTC service manual does not have a guide on how to replace the digitizer or the LCD. They really don't want you messing with it.
It was scary and I thought I had ruined the phone when I pryed the front of the unit open. At first the sticker to the digitizer came off(black framing) and then you have to pry the digitizer(its pretty stiff) from the frame. I destroyed the thin cable that led to the backside of the LCD but the new one has one already attached so I wasn't worried about that part. The LCD with a metal base plate is attached to the back of it. You have to slowly pry off the LCD from the backside of the digitizer.
Anyways I have assembled it back and everything is working perfectly. It was doing Micro-Surgery at times.
Just wanted to share my story.
Click to expand...
Click to collapse
i just had mines fixed called them told them wat i did that i found an outer sreen and tryed to replace it myself and completely destroyed the lil black screen inside of the 4screens put together and that my device software was moded now i had 469 out going and another 469 incoming calls they only charged me 113 but wen we first talked about it they did say about 350 until they see the device and then they will call you before the repair it but the did wipe out my device and reinstalled the oem rom they also gave me a full new body and zero'ed out the incoming and out going calls which never changest unless they put in a new mother board which makes my phone brand new
sorry if ive missed it, but how do you get the lcd and digi out from the black outer casing frame to start with ??, from what i can see it comes out by somehow pushing from the inside to make it pop out ?? could someone please explain a little bit more on how to do this, ill try and make a vid of me getting it out as i have yet to find one that shows this, also my screen has that wierd pearl essance look to it?? does this mean its the digitiser.
Cheers
Mike
pickie said:
sorry if ive missed it, but how do you get the lcd and digi out from the black outer casing frame to start with ??, from what i can see it comes out by somehow pushing from the inside to make it pop out ?? could someone please explain a little bit more on how to do this, ill try and make a vid of me getting it out as i have yet to find one that shows this, also my screen has that wierd pearl essance look to it?? does this mean its the digitiser.
Cheers
Mike
Click to expand...
Click to collapse
Mine had that pearl essence look to it for a good few months before it broke, not that im sure that has anything to do with it.
Just awaiting the delivery of the digitizer and hopefully I can repair it.
yeh mine had the pearl effect for a long time prior to it dyeing
ive followed the service manual and the video of the guy who gets stuck near the end, but how do you g et the screen out of the casing to get to the digitizer?
Its one hell of atight fit and i cant see anything o bvious.
Help
Hi Guys
Sorry about the late replies - had phoneline probs!!
Assuming you followed the instructions in the Service Manual to take the rest of the phone apart, you've just gotta be VERY careful and push the screen out from the back (where the Circuit Boards where) of the plastic frame. At first, it feels like it's not budging but be patient and it WILL start to push away.
It seems to be held in with some sort of hot glue or maybe a contact sort of adhesive and I didn't try it but some heat from something like a hair dryer may make the job easier.
Many people have cracked their LCD screen during the repair but as long as you're careful not to bend the screen too much when taking it out, you'll be fine.
I peeled the 3 layers (outer glass ones and then the Digitizer itself) off the LCD whilst removing it.
Good luck - it's really not that hard. Any more questions - just ask ;-)
ive got the phone apart to the point of the service manual/video
which part of the back do you push out? doesnt look obvious as to whats attached and what isnt
Once you get to the last stage (I thinks it's the Speaker Removal) you simply push on the metal protector of the LCD from the back. You will see small holes in the plastic of the back of the frame where you can push something blunt through and push very lightly on the LCD to push it out.
If I remember correctly, at the bottom of the phone where the circuit board with the vibrator and microphone on it was sitting, there is quite a large opening with the metal backing of the LCD visible through it. I started pushing there and gently went all around the phone in the various small holes dotted around it.
As I said above, it won't feel like it's working at first but it will - just be patient and not too heavy handed!
I posted in another thread about the issue of digitizer being glued to lcd. I had more pics to show, and decided disassembled pics are useful to all! So new thread for full set! If you want more I can get more! If I get enough questions I might make a tutorial for dis assembly.
General Disassembly
Slideshow:
http://img96.imageshack.us/slideshow/webplayer.php?id=htchd2wificam2.jpg
Desoldered Digitizer Pics
Slideshow:
http://img705.imageshack.us/slideshow/webplayer.php?id=htchd2desolderedtermina.jpg
Digitizer Removal w/ Razor
Slideshow:
http://img696.imageshack.us/slideshow/webplayer.php?id=htchd2digioffrazor.jpg
ENJOY!
This really is a great phone!
can't see anything. please use a different host
brandi said:
can't see anything. please use a different host
Click to expand...
Click to collapse
Fixed problem!
OH NO!! what HAVE U done!!!
I know...The horror...I haven't re-assembled to see if still working...HA!
I disassembled because of a cracked digitizer.
looks like a fur or "plastic" carpet, hope you don't end up with ESD related problems
ESD as in ElectroStatic Discharge ^^
Phone still works just fine.
If anybody knows how to un-solder the digitizer away from the lcd, help would be appreciated!
New images added.
Next up:
digitizer/lcd separation
any updates?
Have you managed to fix it yet?
We all want you to succeed so we can operate on our own cracked ones! Maybe you need the "unglue" chemical - you know, like superglue has an antiglue for reversing it's stickiness. If you could find out what glue bonded it, then a specialist adhesive supplier probably knows how to reverse it.
I'm sure you'll like this (if it isn't posted here before...)
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
Still not clear, has he finally removed the lcd on that video from the digitizer? to me it looks they're still cemented
tamas970 said:
Still not clear, has he finally removed the lcd from the digitizer? to me it looks they're still cemented
Click to expand...
Click to collapse
Well if they're cemented (hopefully with some hyper-glue), thats a GOOD thing. Then this will be (hopefully) my first device with NO dust under the glass.
Don't you people have insurances on your devices? Talk to the ensurance company and you will get a new device for a small excess - that is, if it's beyond repair
Halle said:
Well if they're cemented (hopefully with some hyper-glue), thats a GOOD thing. Then this will be (hopefully) my first device with NO dust under the glass.
Click to expand...
Click to collapse
its not ... I have dust under the displayglass.
Floatheavy, and everyone else.
I'm currently on my second HD2, first suffered a hairline crack on the digitizer and it went COMPLETELY unresponsive. After getting the second, I had nothing to loose and disassembled the first. I got everthing apart up to the LCM, this module has everything (the glass digitizer, the LCD and the backlight) all cemented together. As I took the phone apart, priodically I would test that it still worked - everything except the digitizer. When I tried to separate the digitizer from the LCD and baclight I ended up tearing the layers of the LCD apart, now one layer is still glued to the digitizer and one is still glued to the backlight. I have yet to see how this can safely come apart and untill I can buy the LCD the phone is totaly screwed. I think one has to purchase an entire LCM and not just the digitizer.
For those that want to try separating the digitizer - BEWARE, noone seems to have found the secret yet! If I manage to discover something new I'll post.
Yeah. I tried the heat method to separate the digi from the LCD...
No luck
It seems it is more than the simple adhesive broken down by heat.
To get the bezel away from the LCM you can use heat to make easier, but to get the digitizer away from the LCD itself remains a mystery to me.
Anybody get any other results?
OKAY..
Pics updated again...
I was able to get the digitizer apart from the LCD, using a razor.
for separate lcd and digitizer
For separate lcd and digitizer, I used nylo fisher string... and it work good... just right my problem is how to past new one ? neopren glue ?
Honestly, I plan on just adding a dot of super glue to each corner.
I believe most phone adhesives are a sylicon based glue.
It`s almost impossible to un-solder the digitizer away from the lcd, i have succeeded a few times whit hot air and very sharp cutter, but still broke 2 screens from 5...it has to be a solution for this...anyway 3 phones from 5 its not the best rate...
My LCD screeb broken yesterday. I have tmobile HTC HD2.But my touchscreen works fine.
Do I need to purchase this one
http://cgi.ebay.com/OEM-HTC-HD2-T858...#ht_2748wt_698
or
http://cgi.ebay.com/T-MOBILE-HTC-HD2...ht_1845wt_1014
Do I need to solder something or is just an easy fix?
Please let me know.
Thanks
Mine too
The links to the Ebay sale you posted are no longer valid.
My screen is broken also, just the touch sensitive glass (digitizer). The LCD is still in tact.
From what I understand the digitizer is harder to replace than the entire screen (digitizer+LCD) because the LCD is glued to the digitizer. There's a video on YouTube someone posted demoing the process.
http://www.globaldirectparts.com/HTC-T-Mobile-HD2-Digitizer-p/htc733745.htm
Has the digitizer for only $57 USD, but you have to order 3 at at time. If we can find someone else that's interested, then maybe we can go in and get one if that's all that you need also.
Cyph
I have done the digitizer repair, not exactly what I would call a fun time.
Easy to mess up your phone, need to make your own glue or double sided tape (to hold digitizer/lcd/frame together), about 4 little tiny wires that need to be placed correctly when putting the phone back together.
Thankfully the US HD2 does not require soldering the digitizer's connector to the lcd (the european one does), however again this is not a repair job for the feinthearted.
After all was said and done and the digitizer was repaired, the new one had the rainbow/oil effect when under a fluorescent light source, don't know if it is due to me using the wrong digitizer or what, but it did not look good. I had the same issue with a altell touch pro 1 that I purchased on ebay, it annoyed me then and it's back with a vengance.
Have fun, be very meticulous and watch the HD2 dissembler videos about 5 times before you unscrew one screw.
Hey guys. I recently broke my LG V20 (AT&T varient.) It is just the top screen and not tbe LCD Digitizer. The 2nd screen is completly fine and its the main screen that's broken. Does anybody know a good tutorial and a good source to get tbe part ASAP?
Thanks in advanced.
velezj.att said:
Hey guys. I recently broke my LG V20 (AT&T varient.) It is just the top screen and not tbe LCD Digitizer. The 2nd screen is completly fine and its the main screen that's broken. Does anybody know a good tutorial and a good source to get tbe part ASAP?
Thanks in advanced.
Click to expand...
Click to collapse
Dude YouTube
Look up Jerry rig everything his YouTube channel has it all
velezj.att said:
Hey guys. I recently broke my LG V20 (AT&T varient.) It is just the top screen and not tbe LCD Digitizer. The 2nd screen is completly fine and its the main screen that's broken. Does anybody know a good tutorial and a good source to get tbe part ASAP?
Thanks in advanced.
Click to expand...
Click to collapse
As someone else said,youtube.
In the amount of time waiting for a reply, you could have just Googled the question.
And, the second screen, I do believe, is a single physical screen, partitioned by software. If one is trashed, both are I believe.
Thank you. I understand Youtube and Google. The problem with that is there are only like 3 videos, and each video the process is slightly different. When I try and search for the part, I find the glass/LCD digitizer ranging in price from $100-130. This is fine but the problem is I don't want to wait a few weeks to receive it, since all of the places I've found that sell it can't do expedited shipping, and if they do, they are all sold out. Lastly, I also found JUST the top layer of glass (no not a tempered glass protector, the actuall replacement) for only around $10-$20 in price, but there are ZERO videos on Youtube for that process, and a few people in the comments have even asked about this, with no luck.
A combo of multiple things....
This is a relatively new phone. Won't be lots of how tos available for one.
Second, what you are asking about is not a simple fix.
It requires either extreme cold such as, liquid nitrogen or 90% alcohol and dry ice cold. Or extreme heat. You either embrittle the glue with cold and peel it off in pieces or soften via heat and pull it loose in pieces. You run risk of killing your digitizer. Plan ahead accordingly.
You also *will* kill the polarizing layer in between digitizer and glass. Be prepared to replace this as well. Anyone who says otherwise is fibbing, IMO.
Then, you need something to remove the bubbles from the LOCA glue and gorilla glass sandwich.
Then reassemble.
Again: with the phones age, and a small supply chain in place due to the devices age, don't expect much in the way of how tos, or parts.
tl;dr
Not a simple fix. Chances are high you wont get it back to stock without a good technique and some moderately expensive tools.
Edited to add... There's a reason you find very few glass sellers, and lots of people selling digitizer/glass combos. .. The odds of a ****ed job are sky high, esp with phones with curved glass, like Samsung garbage.
On my V10 my front screen had cracked. Rather than try to replace just the digitizer I bought a dead V10 on eBay and replaced the full screen housing from that phone with my motherboard. Much easier to replace full screen assembly if you can find that way.
Sent from my LG-H918 using Tapatalk
I have a v20 Sprint..My Screen Is Cracked Some What At The Top..Will That Crack Cause The Phone To Freeze Up?
like Sometimes The Phone FREEZE BAD but when i press the screen I can still Hear The Sounds from the apps
velezj.att said:
Hey guys. I recently broke my LG V20 (AT&T varient.) It is just the top screen and not tbe LCD Digitizer. The 2nd screen is completly fine and its the main screen that's broken. Does anybody know a good tutorial and a good source to get tbe part ASAP?
Thanks in advanced.
Click to expand...
Click to collapse
https://www.fixez.com/store/lg/lg-v-series/lg-v20
Fixez - LG V20 Screen with Frame
Just thought I would "help" other LG V20 owners; but I just finished replacing the screen on mine after dropping it on the concrete floor in the parking garage at work. It actually landed face down and I had a crappy Incipio case, so it was a spiderweb of cracks although it still ran fine for 3 months until the lines got thicker and thicker.
Anyway, I ordered a replacement Screen with Frame from Fixez.com and just know that it is NOT OEM or even close. I got my phone working; but just some notes for anyone else who finds this and tries to replace the screen themselves.
Most YouTube videos out there are NOT accurate and you will end up having to "move" extra parts they do not show.
I got the FRAME replacement; but I think it would have been BETTER without because all the tiny pieces are GLUED onto the frame.
You MUST have the tools, especially that tweezer one and get a Hair Dryer, because the parts are TINY and GLUED so easier to loosen.
I broke the Headphone Jack, because the connectors are basically membranes, which is why I think you should just replace SCREEN.
I forgot to clean my front facing camera; but I cleaned the two rears ones, so just make sure you "alcohol and air spray" clean before closing.
It is beyond blurry and I do not want to take it apart; but it could actually be the "low quality" peephole, which is creating "flare and blur".
Once I finished and turned it on, I was overjoyed; but after a week I can "see" more problems and just be aware that you really need OEM.
Problems:
Secondary Screen does not "show" when Main Screen is OFF; but it worked with original screen once option enabled.The top part is not white-white; but just a "hair off" and it is like an "oval thumb circle" and might have been "touched" during manufacture.Put some Arctic Silver CPU compound; because this "knock off" runs HOTTER and the first few boots felt like a "burn in" sequence.There is no LG Logo at the bottom of the screen; so if you decide to "sell" it later, then it will be obvious that you are selling "refurbished".The battery seems to drain faster; but I also noticed it does not "like" a FULL charge and runs nice and cold when lower battery charge.Headphone jack broken. Does not light up when I look at screen. Sometimes "double tap" (KNOCKON) does not work correctly.Sometimes I have to press Power Button twice to turn on screen. Sometimes it is once. Basically "sensors or integration" seem to have issues.I just miss how the "little things" used to work perfectly, even when it was cracked.
Basically, this screen feels like a cheap Chinese "knock off"; but I went for the "cheapest option" I found out there and you get what you pay for, so it works, but I hope this helps someone else out there to make an informed decision. Remember, Fixez (and ALL OTHERS) have a NO RETURN policy; because basically they state that it must be in NEW RESELLABLE condition and you are going to be sticking things, bending wires and removing plastic tabs. So do not listen to anyone and these repair shops will NOT return your money once you try to DIY.
If I had to do it again, then I would have spent more time looking for a screen with the LG Logo and at least try to get something with some OEM "guarantee or promise"; which Fixez NEVER made and I just went for Low Price and USA Based. Might have been better to get something OEM from Asia; because I got ganked anyway and I suspect this screen is going to shorten the lifespan of what was a beautiful LG V20 - H918 from T-Mobile.
:crying:
Does anyone know how to find a decent quality replacement of the glass and digitizer? I'll certainly keep the ease of 'no frame' in mind. I would like an oem product for sure. But I want my phone back asap, so I'll take what I can get