hey guys i have attached pictures of my g1's broken screen. First it was just from the top that was unnoticeable now it has spread to the other end take a look. Everything works fine, the touch is working perfectly everywhere on the screen. are there chances that this crack will grow further? i dont think repair parts are available right now ..what do you guys think?
http://img14.imageshack.us/img14/8046/dsc05476vk5.jpg
http://img22.imageshack.us/img22/563/dsc05477yf0.jpg
http://img12.imageshack.us/img12/2802/dsc05478ly8.jpg
http://img14.imageshack.us/img14/7278/dsc05480ry7.jpg
helo? anyone?
http://www.cellulardr.com/products.php?cat=513
is this screen will continue to work for a long time?are there chances of further cracks? which part of screen is this? digitizer?
r4yd3n said:
hey guys i have attached pictures of my g1's broken screen. First it was just from the top that was unnoticeable now it has spread to the other end take a look. Everything works fine, the touch is working perfectly everywhere on the screen. are there chances that this crack will grow further? i dont think repair parts are available right now ..what do you guys think?
http://img14.imageshack.us/img14/8046/dsc05476vk5.jpg
http://img22.imageshack.us/img22/563/dsc05477yf0.jpg
http://img12.imageshack.us/img12/2802/dsc05478ly8.jpg
http://img14.imageshack.us/img14/7278/dsc05480ry7.jpg
Click to expand...
Click to collapse
looks like your digitizer is broken.
however in the link that Dharkaron had posted (http://www.cellulardr.com/products.php?cat=513), there is replacement screen for around $180, it should contain digitizer in it, but i would check before purchase.
if thats a digitizer only, it should not spread, but you are in risk of damaging your lcd display. (not really relevant if you cant get digitizer by itself though)
Sorry but it looks more like your protection sheet is broken try to take that of maybe it will help ;-)
screen protector u mean? no its not tht I checked tht already how can the protector break its not solid ...so digitizer for $180 that expensive I rather wait for some time and get a new one
well, its the whole screen for 180, but it does not say that it does come with digitizer, so it actually maybe wiyhout one, that is why i would check, digitizer for my old sony was around 100 and it was only digitizer, without lcd, so i would wait and see if you can find digitizer by itself (as long as it is actually separate part and not integrated somehow with lcd...) good luck on your hunt.
@WvaanWaas
screeen protector, as like piece of elastic transparent film broken that way? very unlikely my friend.
r4yd3n said:
is this screen will continue to work for a long time?are there chances of further cracks?
Click to expand...
Click to collapse
There is no way to tell how long it will work. Could work for a day, could work for a year. Chances of further cracks? There is always a chance a crack will get bigger as it's subjected to day to day use. Also, please don't bump your own post, especially after less than a day of waiting. We have lives and don't sit here just to answer people's questions.
This link is just the digitizer, like i said prices seem high to me.
http://www.cellulardr.com/G1FaceplateDigitizerBlk.htm
Just saw this, might be all you need if the touchscreen still works on your phone.
http://www.cellulardr.com/G1FaceplateBlk.htm
ok i am confused..the broken screen of my g1 is it digitizer or the faceplate? my touch screen is perfect like before even on the cracked part it works like it used to do...i cant feel the crack probably because of the screen protector..if thts the faceplate then its gud
r4yd3n said:
ok i am confused..the broken screen of my g1 is it digitizer or the faceplate? my touch screen is perfect like before even on the cracked part it works like it used to do...i cant feel the crack probably because of the screen protector..if thts the faceplate then its gud
Click to expand...
Click to collapse
it is digitizer also known as touch screen, faceplate thats whats around (black frame) digitizer/touchscreen is not there, and that is what failed in yours. digitizer/touch screen.
this will not fix the problem: http://www.cellulardr.com/G1FaceplateBlk.htm
this will work: http://www.cellulardr.com/G1FaceplateDigitizerBlk.htm
I think I will continue to use it and wait for some time till I can find cheap digitizer
he3r0 said:
looks like your digitizer is broken.
however in the link that Dharkaron had posted (http://www.cellulardr.com/products.php?cat=513), there is replacement screen for around $180, it should contain digitizer in it, but i would check before purchase.
if thats a digitizer only, it should not spread, but you are in risk of damaging your lcd display. (not really relevant if you cant get digitizer by itself though)
Click to expand...
Click to collapse
It's pretty clear according to the description on Cellulardr that the LCD and the Touch screen digitizer are separate products. The digitizer is about 190$.
Part #: G1FaceplateDigitizerBlk
Manufacturer: HTC
SKU: LS032B7LX01
T-Mobile G1 Google Front Faceplate BLACK with Digitizer Touchscreen Lens
HTC Tmobile Android G1 Faceplate with Window Lens Touch Screen Glass and Flex Cable
Front Window Lens Glass is included
Price: $189.95
r4yd3n said:
hey guys i have attached pictures of my g1's broken screen. First it was just from the top that was unnoticeable now it has spread to the other end take a look. Everything works fine, the touch is working perfectly everywhere on the screen. are there chances that this crack will grow further? i dont think repair parts are available right now ..what do you guys think?
http://img14.imageshack.us/img14/8046/dsc05476vk5.jpg
http://img22.imageshack.us/img22/563/dsc05477yf0.jpg
http://img12.imageshack.us/img12/2802/dsc05478ly8.jpg
http://img14.imageshack.us/img14/7278/dsc05480ry7.jpg
Click to expand...
Click to collapse
The glass of the digitizer is broken my friend. Your screen protector should be intact. The LCD should most likely be intact but there no way of telling it 100% by looking at those pictures even though they were good. It doesn't look that bad but it will most likely get worse. Just use gently contact and do not press the screen. You may notice that the digitizer may not respond exactly like before but pretty good. Now there's a bigger risk your LCD will get broke as well if it is subject to heavy pressure.
Dharkaron said:
Just saw this, might be all you need if the touchscreen still works on your phone.
http://www.cellulardr.com/G1FaceplateBlk.htm
Click to expand...
Click to collapse
r4yd3n said:
ok i am confused..the broken screen of my g1 is it digitizer or the faceplate? my touch screen is perfect like before even on the cracked part it works like it used to do...i cant feel the crack probably because of the screen protector..if thts the faceplate then its gud
Click to expand...
Click to collapse
No the faceplate is just the plastic frame around/above the digitizer. You need the digitizer. Unfortunately CellularDR doesn't sell the digitizer itself but instead they have package of the faceplate+digitizer. That part including many others are out of stock looking at their site.
r4yd3n -> I don't know where you live but if you live in the US or Canada you should be able to order repair parts however if I were you I would send it in. Remember, Cellulardr have strict rules of not shipping outside USA and Canada (Confirmed in email) except probably if you're an american/canadian working overseas.
well the touch screen is still working like before I am surprised ...no effect of broken digitizer on the touch screen
meh
I broke my screen christmas eve
http://androidcommunity.com/forums/members/dzknockout/albums/mine/1605-phone.jpg
(Still fully funtional)
I say leave it till its necessary to get a new one. And rather than buy replacement parts for an arm and a leg, you can send it back to t-mobile for like $110 (provided you have insurance. But honestly, a broken screen isn't that big a deal if it's fully funtional. And my screen is way more f*cked up than yours
ohh yea urz is way too much cracked then my screen ...ok so I will continue to use it and wait for something better.
Good News Google G1 Digitizer Only Now available
Good news guys I just noticed that www.cellulardr.com now sells the Tmobile Google G1 Window Lens with Digitizer only at a lower price: http://www.cellulardr.com/G1Digitizer.htm
They don't have a picture yet so just to be sure I called them and confirmed that this is the correct part. Basically this is the Window Lens Glass with the Touch Screen Digitizer and has the Flex Cable attached to it. It does not include the LCD but I understand that most people that have broken their phone, have only damaged this part.
Hope this helps you guys.
P.S. They told me that they have a limited quantity in stock so if you really need it, jump on it.
Related
right i dropped my brand new exec which id claimed on insurance doh! now i have a blurred screen, the touch part still works an i can still make out whats on the screen but there is a crack in the corner & the whole screen is almost white, do i need to replace the whole lcd or just the touch screen top part? iv been looking on ebay and have seen just the touch part going for about £12 whereas the whole lcd section is roughly £100
Seems like you have a broken lcd, even if some touchscreen are mounted on top of the lcd screen on a separate fine glass sheet, since you say that the digitizer (touchscreen) still works, the crack will almost surely be in the LCD screen's own glass, so no hope for you, go for the entire screen and change it if you can of have done by a qualified technician.
Sorry for the bad news and make a very deep research at Ebay, you might find it for less, might be buying another universal whose defect is not the display, it's not an uncommon thing to see defective PDAs for sale there.
bye
kecido said:
Seems like you have a broken lcd, even if some touchscreen are mounted on top of the lcd screen on a separate fine glass sheet, since you say that the digitizer (touchscreen) still works, the crack will almost surely be in the LCD screen's own glass, so no hope for you, go for the entire screen and change it if you can of have done by a qualified technician.
Sorry for the bad news and make a very deep research at Ebay, you might find it for less, might be buying another universal whose defect is not the display, it's not an uncommon thing to see defective PDAs for sale there.
bye
Click to expand...
Click to collapse
yeah thinkin of sellin it myself for someone else whos got the time and money to fix themselves up a nice new toy ;0)
I posted in another thread about the issue of digitizer being glued to lcd. I had more pics to show, and decided disassembled pics are useful to all! So new thread for full set! If you want more I can get more! If I get enough questions I might make a tutorial for dis assembly.
General Disassembly
Slideshow:
http://img96.imageshack.us/slideshow/webplayer.php?id=htchd2wificam2.jpg
Desoldered Digitizer Pics
Slideshow:
http://img705.imageshack.us/slideshow/webplayer.php?id=htchd2desolderedtermina.jpg
Digitizer Removal w/ Razor
Slideshow:
http://img696.imageshack.us/slideshow/webplayer.php?id=htchd2digioffrazor.jpg
ENJOY!
This really is a great phone!
can't see anything. please use a different host
brandi said:
can't see anything. please use a different host
Click to expand...
Click to collapse
Fixed problem!
OH NO!! what HAVE U done!!!
I know...The horror...I haven't re-assembled to see if still working...HA!
I disassembled because of a cracked digitizer.
looks like a fur or "plastic" carpet, hope you don't end up with ESD related problems
ESD as in ElectroStatic Discharge ^^
Phone still works just fine.
If anybody knows how to un-solder the digitizer away from the lcd, help would be appreciated!
New images added.
Next up:
digitizer/lcd separation
any updates?
Have you managed to fix it yet?
We all want you to succeed so we can operate on our own cracked ones! Maybe you need the "unglue" chemical - you know, like superglue has an antiglue for reversing it's stickiness. If you could find out what glue bonded it, then a specialist adhesive supplier probably knows how to reverse it.
I'm sure you'll like this (if it isn't posted here before...)
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
Still not clear, has he finally removed the lcd on that video from the digitizer? to me it looks they're still cemented
tamas970 said:
Still not clear, has he finally removed the lcd from the digitizer? to me it looks they're still cemented
Click to expand...
Click to collapse
Well if they're cemented (hopefully with some hyper-glue), thats a GOOD thing. Then this will be (hopefully) my first device with NO dust under the glass.
Don't you people have insurances on your devices? Talk to the ensurance company and you will get a new device for a small excess - that is, if it's beyond repair
Halle said:
Well if they're cemented (hopefully with some hyper-glue), thats a GOOD thing. Then this will be (hopefully) my first device with NO dust under the glass.
Click to expand...
Click to collapse
its not ... I have dust under the displayglass.
Floatheavy, and everyone else.
I'm currently on my second HD2, first suffered a hairline crack on the digitizer and it went COMPLETELY unresponsive. After getting the second, I had nothing to loose and disassembled the first. I got everthing apart up to the LCM, this module has everything (the glass digitizer, the LCD and the backlight) all cemented together. As I took the phone apart, priodically I would test that it still worked - everything except the digitizer. When I tried to separate the digitizer from the LCD and baclight I ended up tearing the layers of the LCD apart, now one layer is still glued to the digitizer and one is still glued to the backlight. I have yet to see how this can safely come apart and untill I can buy the LCD the phone is totaly screwed. I think one has to purchase an entire LCM and not just the digitizer.
For those that want to try separating the digitizer - BEWARE, noone seems to have found the secret yet! If I manage to discover something new I'll post.
Yeah. I tried the heat method to separate the digi from the LCD...
No luck
It seems it is more than the simple adhesive broken down by heat.
To get the bezel away from the LCM you can use heat to make easier, but to get the digitizer away from the LCD itself remains a mystery to me.
Anybody get any other results?
OKAY..
Pics updated again...
I was able to get the digitizer apart from the LCD, using a razor.
for separate lcd and digitizer
For separate lcd and digitizer, I used nylo fisher string... and it work good... just right my problem is how to past new one ? neopren glue ?
Honestly, I plan on just adding a dot of super glue to each corner.
I believe most phone adhesives are a sylicon based glue.
It`s almost impossible to un-solder the digitizer away from the lcd, i have succeeded a few times whit hot air and very sharp cutter, but still broke 2 screens from 5...it has to be a solution for this...anyway 3 phones from 5 its not the best rate...
Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike
Vapourmike said:
Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike
Click to expand...
Click to collapse
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.
ap3604 said:
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.
Click to expand...
Click to collapse
Problem is, I cannot afford to be without my phone, the phone is still usable its just difficult to read through the cracks, the image and touchscreen still work perfect, it's as if another layer of glass sits overtop.
Im 100% confident in stripping electronics etc, was just after a quick answer as to whether anyone knew if this was likely to be an entire screen or just a digitizer, if no one knows I will just strip it down tomorrow when I can get to my T drivers.
check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/
look on craigslist. a lot of shady places replace your broken screens for cheap
Moschino02 said:
check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/
Click to expand...
Click to collapse
http://www.crunchgear.com/2010/03/02/official-htc-step-by-step-video-for-disassembling-the-htc-hd2/
mrroey said:
look on craigslist. a lot of shady places replace your broken screens for cheap
Click to expand...
Click to collapse
I'm happy to repair myself as I see no reason to pay someone money when I work with electronics daily and I can locate parts easily, just need to know if its the digitizer or the LCD that's broken without pulling the device apart.
Also, thank you for the link above, will give that a look now, I really think it's just the top digitizer as the screen still shows a crystal clear image, the backlight works fine and the touchscreen works too, its just badly cracked.
This happened to me (apart from the cat), however it seems you got lucky, the LED screen decided to break, has all funny white lines over it but the glass is perfect.
^^ As far as going to fix it your self is concerned, I would have tried myself, however I just know with my luck that something would go wrong and it wouldnt work D:
I usually go via the DIY route but I've seen too many stories where HD2 repairs have gone horribly wrong. It seems that replacing one part is fairly straightforward but avoiding damage to others is not. I'm sure that as miniaturization continues repairs, even by talented amateurs, will become impossible.
It's your digitizer. It's available online. Just make sure you get the right one for your country. TMO-US uses a different one than everywhere else, I believe. Also, watch the video linked above. The digitizer removal I hear is somewhat tricky. Good luck!
Hi there and hello from Croatia!well,i must say changing digitizer on hd2 aint easy.lcd is glued with some special glue type and after you glue them up u need to glue digitizer for housing,for that im using ebay double sided iphone 3m tape but it is not strong enough.as for the hardware inside u ned to be 100% concentrated on this cuz flat for keypad is 30$...digitizer around 50$...chinese resellers with good quality.good luck!
I woke up this morning i my screen glass was boken (i dont remember how 'cause i was too dunk ) ..
well, the thing is ... are those replacement screen on ebay like the original, i mean super amoled ???
is there a way to replace only the glass and not the whole screen? anyone know where to buy only the glass?
thanks a lot ...
The replacements are LCD. The reason you have to replace them is because you can't seperate the glass from the OLED. Maybe getting so drunk wasn't worth it?
nemethb said:
The replacements are LCD. The reason you have to replace them is because you can't seperate the glass from the OLED. Maybe getting so drunk wasn't worth it?
Click to expand...
Click to collapse
Im sorry, your wrong. They aren't LCD replacements. They are SAMOLED screens. I just put my replacement in friday. The one i got from ebay was OEM and works and fits perfectly.
Also, getting drunk is ALWAYS worth it.
how much money do the replacements run for?
ebay links?
Berserk87 said:
how much money do the replacements run for?
ebay links?
Click to expand...
Click to collapse
$55 - $100
So this screen replaces the glass front as well.
Not that i have damaged mine ( touch wood) but always good to know.
That's one reason why you shouldn't get drunk!
Sent from my GT-I9000 using XDA App
MKVFTW said:
Im sorry, your wrong. They aren't LCD replacements. They are SAMOLED screens. I just put my replacement in friday. The one i got from ebay was OEM and works and fits perfectly.
Also, getting drunk is ALWAYS worth it.
Click to expand...
Click to collapse
You're 100% sure they're AMOLED? Whatever the case I don't think breaking a phone is worth it to get super hammed. If you're so inclined to get hammered maybe you should leave your phone at home because having broken your screen just cost you 2-3 bottles of some Grey Goose...
nemethb said:
You're 100% sure they're AMOLED? Whatever the case I don't think breaking a phone is worth it to get super hammed. If you're so inclined to get hammered maybe you should leave your phone at home because having broken your screen just cost you 2-3 bottles of some Grey Goose...
Click to expand...
Click to collapse
Im 100% certain that the screen i got is SAMOLED. But i still need to find a home button
i have replaced the screen on my galaxy s, the screens advertised on ebay are infact super amoled screens, they are advertised as LCD is just a simple mistake (i remember picking one up around £30). The original screen is attached to the phone with a double side sticky tape! You'll just have to rip it out but when you get to the home button you have to carefully separate the ribbons for the touch sensitive buttons which are attached to the glass. Then its just a matter of sticking everything back in place and jobs a goodin'
There is a guide on youtube on disassembly which is simple, the rest you have to figure out yourself.
thanks for the reply's ...
but i still have one doubt ..
since the front glass covers the whole front of the phone, maybe it's not the same glass of the screen .. could be an aditional glass above the screen .. or not?
im telling this because my screen broke just 2 or 3 millimiters above the menu button and 1 o 2 mm bellow the screen ...
so, maybe i don't have to replace the whole screen system ....
do you know about a case replacement? maybe that could have the front glass ...
i'll post some pictures of my broken screen when i have the chance ...
thanks ...
mappet_hirane said:
thanks for the reply's ...
but i still have one doubt ..
since the front glass covers the whole front of the phone, maybe it's not the same glass of the screen .. could be an aditional glass above the screen .. or not?
im telling this because my screen broke just 2 or 3 millimiters above the menu button and 1 o 2 mm bellow the screen ...
so, maybe i don't have to replace the whole screen system ....
do you know about a case replacement? maybe that could have the front glass ...
i'll post some pictures of my broken screen when i have the chance ...
thanks ...
Click to expand...
Click to collapse
You will have to replace the whole screen/SAMOLED assembly as they are expoxied together. The SAMOLED is so thin that removing it will ultimately damage it.
It is indeed a very stupid design from Samsung with the screen going all the way down around the home button. It has made the glass very vulnerable there and practically all screen cracks start there.
Does anyone have any idea on where i can get a home button. I dont need the ribbon cable and sensors just the physical peice of plastic that is the button itself. I am realy desprate.
Unfortunately my screen broke, the LCD is working fine, and recognizes touches.
Is it possible to change only the glass and digitizer? Eg
I'm afraid of LCD panels from eBay. The service said that warranty is void at all events (even if they repair it).
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
I will order a complete LCD panel with frame and try to replace myself. But I don't know if they are the same quality as original.
erikieperikie said:
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
Click to expand...
Click to collapse
Let us know when you do! Please also specify which replacement you bought. It's a good idea to document these things, because in the coming years many more people will break their screens, unfortunately, but we can help them finding out what screens are worth buying.
I'm especially interested in touch performance and LCD similarity to the original. If you could pay attention to those properties and comment on them when you know, that would be really helpful.
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
billysam said:
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Click to expand...
Click to collapse
Sec0nd said:
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
Click to expand...
Click to collapse
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
billysam said:
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Click to expand...
Click to collapse
Sec0nd said:
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
Click to expand...
Click to collapse
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
I found several glass with digitizer on eBay: https://www.ebay.com/sch/i.html?_fr...RS0&_nkw=Xiaomi+A1+touchscreen+glass&_sacat=0
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
I love advices like that.U r smart.
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Roykooiman said:
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Click to expand...
Click to collapse
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Localhorst86 said:
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Click to expand...
Click to collapse
I've contacted a local repair shop and said they couldn't do only the digitizer, but they can do the whole LCD repair which will cost me 25 euro. Now I have to find the right one..... as you have so much variant on Ebay and Alie. U have a suggestion on which one to choose?
My MI A1 display is craked .but display is working and phone functions are working .just I ask you if I using the craked display for long time is it problem come.phone sold 3 days ago so I cannot want to repair the lcd. .Plz advice
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
erikieperikie said:
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
Click to expand...
Click to collapse
Do buttons light work ?
NITRO_100 said:
Do buttons light work ?
Click to expand...
Click to collapse
Yes! See attached images. The LED also works, but isn't on in the pictures.
erikieperikie said:
Yes! See attached images. The LED also works, but isn't on in the pictures.
Click to expand...
Click to collapse
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
NITRO_100 said:
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
Click to expand...
Click to collapse
I didn't know that! It wouldn't have been bad, because I don't like the button backlight at all: it's on for too short, it's too bright, it's not like I can't find the buttons and it's not like I don't know what functions the buttons have... I hope we can turn it down or off in the stock ROM in the future!