I just flashed a NC with cm7 and flashed Phiremod 7.2 on it, but when booted up it wants to force close android.process.media. And the status bar is missing too. When I try to open Play Store it again wants to force close android.process.media
Any help?
Oh, I nandroid backedup, cleared both caches, flashed rom then flashed gapps
Sent from my Nook Color running CM7/Phiremod v7.2, using xda premium
Just remembered that I should have done a factory reset first... is that critical?
Sent from my Nook Color running CM7/Phiremod v7.2, using xda premium
use TWO sd cards
Ok... dummy me. I had the cwm image on my 8gb sd.. correctly. BUT also had the ROM zip and GAPPS zip on the very same card! somehow the clockworkmod would get stuck. I started over with the cwm image on one card, and the zips on another one... worked fine then.
Related
Hey yall I'm having a problem with my Aria. I formatted my micro sd and wiped the phone to start with a clean slate. I downloaded CM7 RC2 from the CM website and i also downloaded gapps from there as well. but when i installed RC2 and gapps it would start up normally then when i would try to use the setup wizard it would freeze once i touched the android guy and would go into a boot loop. i recorded a video to help explain what im talking about. could it possibly be a corrupted version of gapps? cause i tried installing just rc2 and it worked fine....
http://www.youtube.com/watch?v=iZWiYGHh8LQ
Was it plugged in while in recovery?
yes and no. i didnt have it plugged in the first time around but the second time i did. and i did a factory reset, cleared the cache and the dalvik cache
Try re downloading the rom and gapps file. Make sure phone is unplugged and wipe data and caches again and then flash again. Ghats what I would do.
Army_Spec_Ops said:
Hey yall I'm having a problem with my Aria. I formatted my micro sd and wiped the phone to start with a clean slate. I downloaded CM7 RC2 from the CM website and i also downloaded gapps from there as well. but when i installed RC2 and gapps it would start up normally then when i would try to use the setup wizard it would freeze once i touched the android guy and would go into a boot loop. i recorded a video to help explain what im talking about. could it possibly be a corrupted version of gapps? cause i tried installing just rc2 and it worked fine....
http://www.youtube.com/watch?v=iZWiYGHh8LQ
Click to expand...
Click to collapse
Sounds like you might be using the wrong gapps. Double check you got the right one.
Sent from my Liberty using Tapatalk
You're almost certainly using the wrong Gapps.
Get the right one from here
http://wiki.cyanogenmod.com/index.php?title=Latest_Version
I have a working copy of cm7.1 on my sd card. I want to return my emmc back to stock. I have flashed 1.0.1, 1.2 and 1.3 to emmc many many times. It all come up good but when I try to register the nook with ant version my keyboard pops up and immediately disappears so I cannot type email and password. In cm7 the keyboard works fine.
I'm at a complete loss.
Try starting from a 1.0.1 rom and make sure you format system data and cache on emmc with cwm
Sent from my PG86100 using xda premium
im having the same problem some how my daugter install cm7 and I tried reverting back to stock flashed 1.0.1 and everything. Im lost. Please help
My MIUI rom is MIUI-108050 version and though it's pretty nice when working, I can't enter the Market without it crashing and I can't get it to enter Bootloader or Recovery. Titanium Backup nor Clockwork Recovery nor Rom Manager are available - for some reason they are gone or not accessible. Titanium Backup shows in my App Manager, but it doesn't show in App tray. So my Nook Color is stuck with a barely working MIUI Rom. Does anyone have a suggestion for getting to a different Rom or for getting back to stock?
I briefly tried MIUI and had pretty much the same problem. I read somehwere else that you have to do a complete wipe when you first install it. I haven't bothered going back to confirm if that works, but it might be worth a shot.
Make a new SD card with CWM image on it. I have had great success with eyeballer's image and instructions:
http://forum.xda-developers.com/showthread.php?t=1030227
Then load zip file one of the roms on SD card. 1.11.4 is the latest MIUI rom available at miui.us (my rom of choice)
http://roms.miui.us/
Turn off nook. Load SD card. Turn on nook. In mounts and storage (if it isn't there on initial.screen, tap the power button to go back) format data, format system. Clear cache. Then install zip file of rom.
If my directions don't make sense, post back and I will give you a very detailed list of steps.
Sent from my NookColor using xda premium
I had similar problems with MIUI on NC. I finally had to move to a different ROM. I currently running Phiremond 7.1 and it is very stable.
Hi,
So I got my girlfriend this gift basically right when it came out. I rooted it, and flashed CM 7.1 RC1 (literally came out that day) a long time ago.
She gave it to me yesterday to get her PDF's on there. I opened the market and nothing would pop up except for the like 5 total apps, while the Browser was working 100% fine. I go to my apps in the market and try downloading updates and they kept failing. I was frustrated, so I downloaded the latest Cyanogen Nightly and Gapps. I updated CWM to 6.0.3.1, then made a backup of the existing ROM. I went into recovery, and tried finding the Nightly and Gapps I downloaded, but the SD Card would never mount. I'm not sure how I can fix this.
Please help, thanks a ton!
Jimmy
hmmm what about putting the stuff in the phone memory and flash there
Jimmy058910 said:
Hi,
So I got my girlfriend this gift basically right when it came out. I rooted it, and flashed CM 7.1 RC1 (literally came out that day) a long time ago.
She gave it to me yesterday to get her PDF's on there. I opened the market and nothing would pop up except for the like 5 total apps, while the Browser was working 100% fine. I go to my apps in the market and try downloading updates and they kept failing. I was frustrated, so I downloaded the latest Cyanogen Nightly and Gapps. I updated CWM to 6.0.3.1, then made a backup of the existing ROM. I went into recovery, and tried finding the Nightly and Gapps I downloaded, but the SD Card would never mount. I'm not sure how I can fix this.
Please help, thanks a ton!
Jimmy
Click to expand...
Click to collapse
Since you did it so long ago, do you remember if you installed the CM7 to emmc or SD? That may be your issue.
And how did you get 6.0.3.1? Rom Manager? That may be your issue too.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Since you did it so long ago, do you remember if you installed the CM7 to emmc or SD? That may be your issue.
And how did you get 6.0.3.1? Rom Manager? That may be your issue too.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thanks for the responses! To be 100% honest, I don't remember how I rooted/flashed. I know I had to buy an SD card for it though, and the SD card is labeled BOOT
I did get 6.0.3.1 through ROM Manager.
Jimmy058910 said:
Thanks for the responses! To be 100% honest, I don't remember how I rooted/flashed. I know I had to buy an SD card for it though, and the SD card is labeled BOOT
I did get 6.0.3.1 through ROM Manager.
Click to expand...
Click to collapse
Do you need the SD inserted for it to boot to your CM7? If so, you installed to SD and with an SD installation, you do not use CWM to install upgrades. That is why you cannot see the zip you downloaded. If you want to upgrade a CM7 SD install to CM10, you need to start over with a newly burned SD. The old SD setup is not compatible with CM10. Use my guide linked in my signature.
You might just want to put CM10 on internal memory, replacing whatever is there. Just download the new CM zip to emmc with CM7, boot to emmc CWM, remove the SD, wipe data/factory reset and flash the new CM zip using the "install from SD/choose from internal memory" option. Then you need to flash the right gapps to match. Then reboot. Once you are sure everything is working, you can format your old SD with SDFormatter so it can be used as a normal data SD. Get it free on the web.
Sent from my Nook HD+ running CM10 on Hybrid SD
The other day my rooted nook decided to recieve an update from barnes and noble and resotred it back to the factory image, so now I have to reroot it so what is everyone using when they are flashing a rom that is getting good results?
I have been rerooting my nook and installed cm10.1.3.2-encore.zip with gapps 20130812 and it goes into the boot screen and just sits there, I also have cm7.2.0-encore.zip and gapps 20110829 and get the same issue. Really I have all the gapps and cm roms just having problems getting them to run and just wondering what is working best for everyone.
munchy09 said:
I have been rerooting my nook and installed cm10.1.3.2-encore.zip with gapps 20130812 and it goes into the boot screen and just sits there, I also have cm7.2.0-encore.zip and gapps 20110829 and get the same issue. Really I have all the gapps and cm roms just having problems getting them to run and just wondering what is working best for everyone.
Click to expand...
Click to collapse
Which boot screen? The stock one or the one for CM?
Did you do a factory reset after using recovery to install the ROM?
Its stuck at the cm one. Yes i did a system/dalvec cache wipe/ cache wipe.
Sent from my DROID4 using xda app-developers app