Hey yall I'm having a problem with my Aria. I formatted my micro sd and wiped the phone to start with a clean slate. I downloaded CM7 RC2 from the CM website and i also downloaded gapps from there as well. but when i installed RC2 and gapps it would start up normally then when i would try to use the setup wizard it would freeze once i touched the android guy and would go into a boot loop. i recorded a video to help explain what im talking about. could it possibly be a corrupted version of gapps? cause i tried installing just rc2 and it worked fine....
http://www.youtube.com/watch?v=iZWiYGHh8LQ
Was it plugged in while in recovery?
yes and no. i didnt have it plugged in the first time around but the second time i did. and i did a factory reset, cleared the cache and the dalvik cache
Try re downloading the rom and gapps file. Make sure phone is unplugged and wipe data and caches again and then flash again. Ghats what I would do.
Army_Spec_Ops said:
Hey yall I'm having a problem with my Aria. I formatted my micro sd and wiped the phone to start with a clean slate. I downloaded CM7 RC2 from the CM website and i also downloaded gapps from there as well. but when i installed RC2 and gapps it would start up normally then when i would try to use the setup wizard it would freeze once i touched the android guy and would go into a boot loop. i recorded a video to help explain what im talking about. could it possibly be a corrupted version of gapps? cause i tried installing just rc2 and it worked fine....
http://www.youtube.com/watch?v=iZWiYGHh8LQ
Click to expand...
Click to collapse
Sounds like you might be using the wrong gapps. Double check you got the right one.
Sent from my Liberty using Tapatalk
You're almost certainly using the wrong Gapps.
Get the right one from here
http://wiki.cyanogenmod.com/index.php?title=Latest_Version
Related
Hey, question. Every single CM from 6.0 I have downloaded I have had issues with. I love the rom, but every time I get the same issue. When I install the rom all worked fine. I wipe all data, clear cache, and have to reinstall of course everything, my issue is that my phone will randomly freeze. Sometimes I get an error message saying the process process.android has failed, other times it just freezes. Does anybody have any ideas?
I loved CM 6.1 best Rom I've had yet. But after a week it started acting up and having problematic auto shutdowns like 8 times a day. I then searched for another stock Rom and tried skyraider vanilla, I hate it. It's basically skinned sense. That's it. I enjoy sense but it eats battery. My favorite roms so far are the desire Hd Rom and
CM but without the shutdowns is be perfect.
Sent from my ADR6300 using XDA App
only people
So this is the only other person I have run into with this problem. Everybody else I have talked to over other forums or IRC has never heard of these issues at all.
The only time I've ever had those shut down issues is when I start screwing with themes or when I start screwing with kernels or overclocking. I'm not sure what you've got going on there though
Well...
Well I have done some of that however I have reverted to "stock" several times. I have Hboot .92 installed also, i saw something online. The latest radio is also installed. I guess has anybody else seen any issues like this?
Try formatting the system in addition to wiping. CM does not format anything when you flash it. In CWM its under mount sd section.
Sent from my Htc Incredible using XDA App
This happened to me today, I am 99% sure it was the kernel I had installed though. I put back invisiblek's #18 and had no problems before or after.
okay I can mess around with that and see what happens then.
justinmburrous said:
okay I can mess around with that and see what happens then.
Click to expand...
Click to collapse
Let us know please.
This morning, I d/l the cyanogen 6.1 stable from ROM Manager, I then rebooted my phone into hboot then into recovery console. I then did a wipe of dalvik and battery stats. I then did the wipe data and then the clear partition cache, I then flashed the Cyanogen 6.1 Inc rom... then went fine... I loaded up into Cyanogen I then did a reboot and that's when my phone would not leave the HTC Incredible screen when rebooting! any ideas that can help me? I really like the Cyanogen ROM
Help!!! please!
neur0tk said:
This morning, I d/l the cyanogen 6.1 stable from ROM Manager, I then rebooted my phone into hboot then into recovery console. I then did a wipe of dalvik and battery stats. I then did the wipe data and then the clear partition cache, I then flashed the Cyanogen 6.1 Inc rom... then went fine... I loaded up into Cyanogen I then did a reboot and that's when my phone would not leave the HTC Incredible screen when rebooting! any ideas that can help me? I really like the Cyanogen ROM
Help!!! please!
Click to expand...
Click to collapse
You need to be a little more specific but do this.
1. Click on the Cyanogen link in my signature and download it.
2. Download google apps
3. Reboot into recovery
4. Wipe Data/Factory Reset
5. Wipe Cache Partition
6. Wipe Dalvik Cache
7. Select install zip from SD card and choose the cyanogen ROM, let it install
8. Select install zip from SD card again and choose the google apps.
9. Reboot your phone and sign into your google account and let everything sync
This is the best way to do it. Not through ROM Manager.
If this doesn't work then I have absolutely no idea. That is the 100% correct way to flash a ROM.
neur0tk said:
This morning, I d/l the cyanogen 6.1 stable from ROM Manager, I then rebooted my phone into hboot then into recovery console. I then did a wipe of dalvik and battery stats. I then did the wipe data and then the clear partition cache, I then flashed the Cyanogen 6.1 Inc rom... then went fine... I loaded up into Cyanogen I then did a reboot and that's when my phone would not leave the HTC Incredible screen when rebooting! any ideas that can help me? I really like the Cyanogen ROM
Help!!! please!
Click to expand...
Click to collapse
I had to revert back to #18 kernel working fine now!
neur0tk said:
I had to revert back to #18 kernel working fine now!
Click to expand...
Click to collapse
Yeah I mentioned it earlier in this thread. For some reason #21 and #22 do not like cyanogen.
I'm running #21 on my phone and I haven't had any issues yet.
Yeah IDK either... I had to revert now it's running like a champ! love the Inexus theme!
ok an update, I have everything working. I an using cm6.1, latest radio (on cm site), kernel 27, hoot .92, and the very latest clockwork that just came out. I know those last two should not matter, just letting you know. As of right now my phone is not freezing and everything works fine, even faster than before. When I first turned it on the phone did freezer and after that yet took a long time for 3g to start working. On reinstall I did a total revert to stock then did a factory reset and cleared all caches and everything on the phone there is to clear. It has been afew hours. I will update this if there are any more problems
Sent from my ADR6300 using Tapatalk
Keeps rebooting more and more time to switch roms
Justinmburrous
Justinmburrous.com
So I just installed CM7 on my evo and the market closes no more than a second after I tap it. I've already wiped the caches(dalvik included)and wiped and reinstalled CM7. I can't figure it out. Anyone know what going on?
bhsvault said:
So I just installed CM7 on my evo and the market closes no more than a second after I tap it. I've already wiped the caches(dalvik included)and wiped and reinstalled CM7. I can't figure it out. Anyone know what going on?
Click to expand...
Click to collapse
Which GAPPS did you install?
I installed the pack included in the battery mod .zip on the CM7 page in the dev forum.
Magnus's CM7, that is the only one that I saw with the batterymod flashable.
If soo the GAPPS shouldn't have been packaged with the battmod. Also if you downloaded the one that was called "NewMarket" you shouldn't flash that until after the phone has fully booted up with the initial flash of GAPPS.
If you are looking for CM7 specifically, i recommend using the teamdouche buildbot.
http://mirror.teamdouche.net/?device=supersonic
The topmost download will always be the latest build of CM7, and use this GAPPS download with it.
http://android.d3xt3r01.tk/cyanogen/gapps/gapps-gb-20110120-signed.zip
Thanks for the feedback. I'll try the rom and the gapps whem I get home.
Pretty much.. just wipe the market cache and data. Then launch the application again.
Sent From My CM 6.1.2 Monster Evo.
@ Jason Black
I already wiped everything earlier and it didn't work.
@ Khilbron
Thank you very much. It turned out that it was just the Gapps that I flashed. I used your package and it works flawlessly now.
I have been trying to get Google apps, Android Market, and Netflix app to work on my NC CM7.03 stable for a week now. When I first flashed to CM7 I wiped the system, cache, boot, and data like it told me to in CWR, and the Netflix worked for about 1 day. I tried to re flash CM7 and I have tried installing the gapps.zip when I do a fresh flash, and after I set up wifi. It has not worked at all.
After It not working I tried to put Phiremod 6.3 and this time i got the market to show up in my apps, but it would immediately close. All I want to do is get the market working as well as netflix. Am I missing something? What didn't I do because it seems to me that just about everyone has these working. Please any help is appreciated.
Do you have a nandroid back up? If you did, I would try a full wipe. Data,cache, dalvik cache. Then try a fresh install. It sounds like you have ghosts from prior flashes. Probably already knew that, just trying to help.
Sent from my Optimized Shift using XDA App
Thank you, I will have to try all of the wiping again. im gonna try again in the morning and see if it does the trick. I was wondering as well, should I use CM7 or Phiremod? Both seem to be pretty good I was just wondering which one would run the apps better
Download the latest nightly or CM7.1 RC. Not sure if phiremod incorporates the latest builds from CM7
I did the veryGreen install using the latest stable and the first time I had issues so I did a clean install today. I finally got a recovery menu but after I wiped davlik cache it booted into the regular NC OS while the memory card was still inserted. I shut it down and CM7 started up and after I moved the ring to unlock the device it rebooted back to NC OS once again. Shut it down again and CM7 loaded just fine. Anyone have any ideas on why it did this? Thanks.
Maybe somthing is on ur SD card and keeps reading off it
HTC Wildfire S (VM) "s-off" "rooted" Stock Rom
How did you actually "wiped davlik cache" when running CM7 off uSD?
votinh said:
How did you actually "wiped davlik cache" when running CM7 off uSD?
Click to expand...
Click to collapse
I did a clean install so I formatted my uSD using one of the programs suggested here. I did my veryGreen install and everything seemed okay.
Reading around everyone keeps saying clear davlik cache if you are having force close problems. So I rebooted in Clockwork Recovery and I used the volume buttons to go to the option to clear davlik cache. On my prior install I couldn't even get the menu to come up.
I have been playing around more and as long as I shut the NC down it works fine. But if I try a reboot it boots up the NC side now.
what version of cm7 are you running? sounds to me that it might be buggy
jsnake said:
I did a clean install so I formatted my uSD using one of the programs suggested here. I did my veryGreen install and everything seemed okay.
Reading around everyone keeps saying clear davlik cache if you are having force close problems. So I rebooted in Clockwork Recovery and I used the volume buttons to go to the option to clear davlik cache.
Click to expand...
Click to collapse
Those steps are only applied when running CM7 on eMMC, not off the uSD.
O sorry for the bad info! He nos more then I do
HTC Wildfire S (VM) "s-off" "rooted" Stock Rom
Heyho,
having some problems with installing the Paranoid Android rom. So im on veryion 4.2.2 and the bootloader is unlocked. I also installed the recovery ClockworkMod (clockworkmod.com).
Next I've done a "wipe data/factory reset".
Then I installed PA (pa_mako-3.00-15FEB2013-223348.zip(goo.im/devs/paranoidandroid/roms/mako))
and gapps: goo.im/devs/paranoidandroid/roms/gapps
Finally I wiped the cache and dalvik and restarted the device. There were also no errors during installation, everything was fine.
Now the problem is that the device loops during boot after the "Google" screen. I also took a log: dl.dropbox.com/u/97517326/log.txt
As far as I can see the device loops and tries something again and again. Help, how to install PA would be awesome. If it does not work, I can still live with the default
EDIT: Found a page which describes the same steps which I have been gone: androidegis.com/how-to/install-paranoidandroid-rom-for-nexus-4-features-hybrid-modes
p000ison
p000ison said:
Heyho,
having some problems with installing the Paranoid Android rom. So im on veryion 4.2.2 and the bootloader is unlocked. I also installed the recovery ClockworkMod (clockworkmod.com).
Next I've done a "wipe data/factory reset".
Then I installed PA (pa_mako-3.00-15FEB2013-223348.zip(goo.im/devs/paranoidandroid/roms/mako))
and gapps: goo.im/devs/paranoidandroid/roms/gapps
Finally I wiped the cache and dalvik and restarted the device. There were also no errors during installation, everything was fine.
Now the problem is that the device loops during boot after the "Google" screen. I also took a log: dl.dropbox.com/u/97517326/log.txt
As far as I can see the device loops and tries something again and again. Help, how to install PA would be awesome. If it does not work, I can still live with the default
EDIT: Found a page which describes the same steps which I have been gone: androidegis.com/how-to/install-paranoidandroid-rom-for-nexus-4-features-hybrid-modes
p000ison
Click to expand...
Click to collapse
Make sure you flash the pa gapps in the op. The 0209 gapps
Sent from my Nexus 4 using Tapatalk 2
eainyow said:
Make sure you flash the pa gapps in the op. The 0209 gapps
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Had the same idea, because I found the gapps version somewhere else, so I tried it again with the 209 version but still no success. But I have an other idea because I found this exception: pastebin.com/wnC0rFv7 It says that it could not find the provider settings. Maybe this is because I do not have a sim card atm, because it did not arrive until now. Could this be the solution?
p000ison said:
Had the same idea, because I found the gapps version somewhere else, so I tried it again with the 209 version but still no success. But I have an other idea because I found this exception: pastebin.com/wnC0rFv7 It says that it could not find the provider settings. Maybe this is because I do not have a sim card atm, because it did not arrive until now. Could this be the solution?
Click to expand...
Click to collapse
I am having the same problem, but I have a sim card. It just loops on the paranoid android 3+ page forever.
installing should be straight forward. factory reset, rom pa-gapps (not goo's), wipe cache + dalvik, done. first boot takes a while,
i havent tried booting it without simcard, but i dont think that could make a difference. can you make dead sure you get the right files?
1. rom: http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-3.00-15FEB2013-223348.zip
2. gapps: http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.2-20130209.zip