Heyho,
having some problems with installing the Paranoid Android rom. So im on veryion 4.2.2 and the bootloader is unlocked. I also installed the recovery ClockworkMod (clockworkmod.com).
Next I've done a "wipe data/factory reset".
Then I installed PA (pa_mako-3.00-15FEB2013-223348.zip(goo.im/devs/paranoidandroid/roms/mako))
and gapps: goo.im/devs/paranoidandroid/roms/gapps
Finally I wiped the cache and dalvik and restarted the device. There were also no errors during installation, everything was fine.
Now the problem is that the device loops during boot after the "Google" screen. I also took a log: dl.dropbox.com/u/97517326/log.txt
As far as I can see the device loops and tries something again and again. Help, how to install PA would be awesome. If it does not work, I can still live with the default
EDIT: Found a page which describes the same steps which I have been gone: androidegis.com/how-to/install-paranoidandroid-rom-for-nexus-4-features-hybrid-modes
p000ison
p000ison said:
Heyho,
having some problems with installing the Paranoid Android rom. So im on veryion 4.2.2 and the bootloader is unlocked. I also installed the recovery ClockworkMod (clockworkmod.com).
Next I've done a "wipe data/factory reset".
Then I installed PA (pa_mako-3.00-15FEB2013-223348.zip(goo.im/devs/paranoidandroid/roms/mako))
and gapps: goo.im/devs/paranoidandroid/roms/gapps
Finally I wiped the cache and dalvik and restarted the device. There were also no errors during installation, everything was fine.
Now the problem is that the device loops during boot after the "Google" screen. I also took a log: dl.dropbox.com/u/97517326/log.txt
As far as I can see the device loops and tries something again and again. Help, how to install PA would be awesome. If it does not work, I can still live with the default
EDIT: Found a page which describes the same steps which I have been gone: androidegis.com/how-to/install-paranoidandroid-rom-for-nexus-4-features-hybrid-modes
p000ison
Click to expand...
Click to collapse
Make sure you flash the pa gapps in the op. The 0209 gapps
Sent from my Nexus 4 using Tapatalk 2
eainyow said:
Make sure you flash the pa gapps in the op. The 0209 gapps
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Had the same idea, because I found the gapps version somewhere else, so I tried it again with the 209 version but still no success. But I have an other idea because I found this exception: pastebin.com/wnC0rFv7 It says that it could not find the provider settings. Maybe this is because I do not have a sim card atm, because it did not arrive until now. Could this be the solution?
p000ison said:
Had the same idea, because I found the gapps version somewhere else, so I tried it again with the 209 version but still no success. But I have an other idea because I found this exception: pastebin.com/wnC0rFv7 It says that it could not find the provider settings. Maybe this is because I do not have a sim card atm, because it did not arrive until now. Could this be the solution?
Click to expand...
Click to collapse
I am having the same problem, but I have a sim card. It just loops on the paranoid android 3+ page forever.
installing should be straight forward. factory reset, rom pa-gapps (not goo's), wipe cache + dalvik, done. first boot takes a while,
i havent tried booting it without simcard, but i dont think that could make a difference. can you make dead sure you get the right files?
1. rom: http://goo.im/devs/paranoidandroid/roms/mako/pa_mako-3.00-15FEB2013-223348.zip
2. gapps: http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.2-20130209.zip
Related
Hey, question. Every single CM from 6.0 I have downloaded I have had issues with. I love the rom, but every time I get the same issue. When I install the rom all worked fine. I wipe all data, clear cache, and have to reinstall of course everything, my issue is that my phone will randomly freeze. Sometimes I get an error message saying the process process.android has failed, other times it just freezes. Does anybody have any ideas?
I loved CM 6.1 best Rom I've had yet. But after a week it started acting up and having problematic auto shutdowns like 8 times a day. I then searched for another stock Rom and tried skyraider vanilla, I hate it. It's basically skinned sense. That's it. I enjoy sense but it eats battery. My favorite roms so far are the desire Hd Rom and
CM but without the shutdowns is be perfect.
Sent from my ADR6300 using XDA App
only people
So this is the only other person I have run into with this problem. Everybody else I have talked to over other forums or IRC has never heard of these issues at all.
The only time I've ever had those shut down issues is when I start screwing with themes or when I start screwing with kernels or overclocking. I'm not sure what you've got going on there though
Well...
Well I have done some of that however I have reverted to "stock" several times. I have Hboot .92 installed also, i saw something online. The latest radio is also installed. I guess has anybody else seen any issues like this?
Try formatting the system in addition to wiping. CM does not format anything when you flash it. In CWM its under mount sd section.
Sent from my Htc Incredible using XDA App
This happened to me today, I am 99% sure it was the kernel I had installed though. I put back invisiblek's #18 and had no problems before or after.
okay I can mess around with that and see what happens then.
justinmburrous said:
okay I can mess around with that and see what happens then.
Click to expand...
Click to collapse
Let us know please.
This morning, I d/l the cyanogen 6.1 stable from ROM Manager, I then rebooted my phone into hboot then into recovery console. I then did a wipe of dalvik and battery stats. I then did the wipe data and then the clear partition cache, I then flashed the Cyanogen 6.1 Inc rom... then went fine... I loaded up into Cyanogen I then did a reboot and that's when my phone would not leave the HTC Incredible screen when rebooting! any ideas that can help me? I really like the Cyanogen ROM
Help!!! please!
neur0tk said:
This morning, I d/l the cyanogen 6.1 stable from ROM Manager, I then rebooted my phone into hboot then into recovery console. I then did a wipe of dalvik and battery stats. I then did the wipe data and then the clear partition cache, I then flashed the Cyanogen 6.1 Inc rom... then went fine... I loaded up into Cyanogen I then did a reboot and that's when my phone would not leave the HTC Incredible screen when rebooting! any ideas that can help me? I really like the Cyanogen ROM
Help!!! please!
Click to expand...
Click to collapse
You need to be a little more specific but do this.
1. Click on the Cyanogen link in my signature and download it.
2. Download google apps
3. Reboot into recovery
4. Wipe Data/Factory Reset
5. Wipe Cache Partition
6. Wipe Dalvik Cache
7. Select install zip from SD card and choose the cyanogen ROM, let it install
8. Select install zip from SD card again and choose the google apps.
9. Reboot your phone and sign into your google account and let everything sync
This is the best way to do it. Not through ROM Manager.
If this doesn't work then I have absolutely no idea. That is the 100% correct way to flash a ROM.
neur0tk said:
This morning, I d/l the cyanogen 6.1 stable from ROM Manager, I then rebooted my phone into hboot then into recovery console. I then did a wipe of dalvik and battery stats. I then did the wipe data and then the clear partition cache, I then flashed the Cyanogen 6.1 Inc rom... then went fine... I loaded up into Cyanogen I then did a reboot and that's when my phone would not leave the HTC Incredible screen when rebooting! any ideas that can help me? I really like the Cyanogen ROM
Help!!! please!
Click to expand...
Click to collapse
I had to revert back to #18 kernel working fine now!
neur0tk said:
I had to revert back to #18 kernel working fine now!
Click to expand...
Click to collapse
Yeah I mentioned it earlier in this thread. For some reason #21 and #22 do not like cyanogen.
I'm running #21 on my phone and I haven't had any issues yet.
Yeah IDK either... I had to revert now it's running like a champ! love the Inexus theme!
ok an update, I have everything working. I an using cm6.1, latest radio (on cm site), kernel 27, hoot .92, and the very latest clockwork that just came out. I know those last two should not matter, just letting you know. As of right now my phone is not freezing and everything works fine, even faster than before. When I first turned it on the phone did freezer and after that yet took a long time for 3g to start working. On reinstall I did a total revert to stock then did a factory reset and cleared all caches and everything on the phone there is to clear. It has been afew hours. I will update this if there are any more problems
Sent from my ADR6300 using Tapatalk
Keeps rebooting more and more time to switch roms
Justinmburrous
Justinmburrous.com
Hey yall I'm having a problem with my Aria. I formatted my micro sd and wiped the phone to start with a clean slate. I downloaded CM7 RC2 from the CM website and i also downloaded gapps from there as well. but when i installed RC2 and gapps it would start up normally then when i would try to use the setup wizard it would freeze once i touched the android guy and would go into a boot loop. i recorded a video to help explain what im talking about. could it possibly be a corrupted version of gapps? cause i tried installing just rc2 and it worked fine....
http://www.youtube.com/watch?v=iZWiYGHh8LQ
Was it plugged in while in recovery?
yes and no. i didnt have it plugged in the first time around but the second time i did. and i did a factory reset, cleared the cache and the dalvik cache
Try re downloading the rom and gapps file. Make sure phone is unplugged and wipe data and caches again and then flash again. Ghats what I would do.
Army_Spec_Ops said:
Hey yall I'm having a problem with my Aria. I formatted my micro sd and wiped the phone to start with a clean slate. I downloaded CM7 RC2 from the CM website and i also downloaded gapps from there as well. but when i installed RC2 and gapps it would start up normally then when i would try to use the setup wizard it would freeze once i touched the android guy and would go into a boot loop. i recorded a video to help explain what im talking about. could it possibly be a corrupted version of gapps? cause i tried installing just rc2 and it worked fine....
http://www.youtube.com/watch?v=iZWiYGHh8LQ
Click to expand...
Click to collapse
Sounds like you might be using the wrong gapps. Double check you got the right one.
Sent from my Liberty using Tapatalk
You're almost certainly using the wrong Gapps.
Get the right one from here
http://wiki.cyanogenmod.com/index.php?title=Latest_Version
I got a question here and now the s stuck.
everything done perfectly and I downloaded CM7, updated it. and then the chaos started.
the phone just show up the startup image, after about 20 seconds, it keeps load the startup image again and again.
I am thinking it's keep reboot the system but just won't start the system.
I flashed RC4 version CM7 as well and same problem. It seems it's not the rom problem. should be something wrong with the phone.
can someone help me here?
thanks
did you do a full wipe before flashing it?
Get into your recovery and wipe the data, the cache, and the dalvik cache, then flash CM7
marcoso2 said:
I got a question here and now the s stuck.
everything done perfectly and I downloaded CM7, updated it. and then the chaos started.
the phone just show up the startup image, after about 20 seconds, it keeps load the startup image again and again.
I am thinking it's keep reboot the system but just won't start the system.
I flashed RC4 version CM7 as well and same problem. It seems it's not the rom problem. should be something wrong with the phone.
can someone help me here?
thanks
Click to expand...
Click to collapse
I tried installing he paranoid android rom, i have no idea what happened, now i just get, unfortunately, setup wizard has stopped, error.
Did you flash gapps too? If so, which package? Also, It would be helpful to know which version of PA you flashed, as 2.54 and the 2.99 betas are going to need different gapps.
najaboy said:
Did you flash gapps too? If so, which package? Also, It would be helpful to know which version of PA you flashed, as 2.54 and the 2.99 betas are going to need different gapps.
Click to expand...
Click to collapse
I tried to install this first, pa_gapps-full-4.2-20121127.zip, when i started my nexus 7 nothing showed up, nothing changed. So then i download pa_grouper-2.99-beta9.zip and gapps-jb-20121212-signed.zip. Then i got the problem, unfortunately, startup wizard has stopped. By the way my nexus 7 runs android jellybean 4.2.1.
Kanwardeep said:
I tried to install this first, pa_gapps-full-4.2-20121127.zip, when i started my nexus 7 nothing showed up, nothing changed. So then i download pa_grouper-2.99-beta9.zip and gapps-jb-20121212-signed.zip. Then i got the problem, unfortunately, startup wizard has stopped. By the way my nexus 7 runs android jellybean 4.2.1.
Click to expand...
Click to collapse
1) Wipe data, cache, and dalvik cache
2) Install pa_grouper-2.99-beta9.zip
3) Install gapps-jb-20121212-signed.zip
4) Fix permissions
5) Reboot
Hi. My Nexus 4 got stuck in a bootloop while attempting to flash the PAC-man ROM and I have no idea what to do!
I am a total noob at this, so I'll just go through the details. I cleaned Dalvik and Cache and then flashed the files: pac_mako-22.2.0-rc1(Downloaded from official PAC-ROM site) and gappsinverted-jb-20130308-signed(From rootzwiki). After flashing these two, I tried starting the phone. The minigame turned up and then it moved on to the 'PAC is LOADING' screen. It stayed like that for 15 minutes... The only way I knew the phone hadn't hung was because there was the constant movement of the loading bar. So I got into TWRP recovery again and flashed Paranoid Android back so the device would be usable again.
I really want to try PAC-man and would be grateful to anyone who can help me out...
noobvorld said:
Hi. My Nexus 4 got stuck in a bootloop while attempting to flash the PAC-man ROM and I have no idea what to do!
I am a total noob at this, so I'll just go through the details. I cleaned Dalvik and Cache and then flashed the files: pac_mako-22.2.0-rc1(Downloaded from official PAC-ROM site) and gappsinverted-jb-20130308-signed(From rootzwiki). After flashing these two, I tried starting the phone. The minigame turned up and then it moved on to the 'PAC is LOADING' screen. It stayed like that for 15 minutes... The only way I knew the phone hadn't hung was because there was the constant movement of the loading bar. So I got into TWRP recovery again and flashed Paranoid Android back so the device would be usable again.
I really want to try PAC-man and would be grateful to anyone who can help me out...
Click to expand...
Click to collapse
You have to also wipe DATA when you flash a new ROM. Use the factory reset option.
also, your gapps are out of date. you got stuck at rebuilding the dalvik, which is kinda normal for android 4.3. all you have to do, should have to do, is force reboot once or twice until the dalvik gets rebuilt, then itll boot.
simms22 said:
also, your gapps are out of date. you got stuck at rebuilding the dalvik, which is kinda normal for android 4.3. all you have to do, should have to do, is force reboot once or twice until the dalvik gets rebuilt, then itll boot.
Click to expand...
Click to collapse
Sorry, but I don't know what you mean by 'force reboot'. Could you walk me through the steps please? Thanks!
noobvorld said:
Sorry, but I don't know what you mean by 'force reboot'. Could you walk me through the steps please? Thanks!
Click to expand...
Click to collapse
Hold the power button for about 10 seconds.
You are trying to use 4.2.2 gapps on 4.3 rom