My vibrant gave up the ghost 2 days ago. Turned itself off and now it won't fully boot without turning itself off unless I leave it undisturbed on a table.
Something on/under the ringer/speaker is loose or corroded, because tapping on that part of the phone makes it cut itself off.
Been using a Galaxy Tab as my phone for the past day and a half. Galaxy Nexus should arrive at home this afternoon.
Goodbye vibrant and Bionix. I would have liked to keep you as a media player, but I guess it is not to ever be. You worked well... except for your wonky GPS and tendency to 'forget' custom ring tones for contacts.... and your shrinking battery life (I have 4 spare batteries).... and taking 2 minutes to read the SD cards during boot up.... but you sure had a nice screen.
You could still use it as a media player. Odin it back to stock then flash a rom. There's one that's design just for that.
You said when you tap it on the side it cuts its self, do you mean it shuts down?
Sent from my SGH-T959 using Tapatalk 2
When I tap it on the back surface of the phone, close to the top (basically where the ringer/speaker-phone is) then it shuts itself off (power goes off)
Other things can cause it to shut off, but that seems to be the problem area.
you may can fix it
well, if you have a soldering iron and a oven proceed, if not but you want to fix it go and buy one.
**Do it only as last resource and if you dont have an soldering station.**
take out the board of you vibrant, solder a small piece of any wire you have on an insignificant par of the board (like the gold border around it) put the board in the oven nearly at 200ºC and wait a bit of time till the solder you have done got liquid an the wire goes down.Turn off the oven and let the door open in order to cool ,wait till it got fresh enough to test.
Be happy!
Obs.:the board will get damage if you let it got more hot than necessary.
Good luck!
Are you suggesting that I connect the board to an electrical ground?
Did you have insurance on the phone? If so I'd get it replaced and then sell the new phone.
Sent from my SGH-T959 using xda premium
No. Phone insurance is mostly a rip off unless you lose it in the first ~4 months of ownership.
It was worth a shot.
I have it on mine, but I wonder what they would replace it with on a claim if I was to break it since they stopped selling the vibrant quite a while ago.
Sent from my SGH-T959 using xda premium
Tarzanman said:
Are you suggesting that I connect the board to an electrical ground?
Click to expand...
Click to collapse
no, only to you resolder you board without the full equipment needed.
Sorry for my bad english, it's not my natural language.
***BUT, if you still on warranty,wipe all,odin a stock rom and let they replace your phone.
Could you sell it for parts? I'm in need of a few vibrant parts at the moment.
acseazzu said:
Could you sell it for parts? I'm in need of a few vibrant parts at the moment.
Click to expand...
Click to collapse
Which parts are you interested in?
Im interested in phone mine has
Sent from my SGH-T959 using XDA
Related
Ok so my friend has an HD2. He was at work and some prick dumped a bucket of water on him. So I got looking at his phone and it seems that the only thing wrong is that the screen will not come on.
I can get the bottom lights to come on and the volume is somewhat working. But the screen will not light up at all. My question is... is there a way to buy a replaceable screen? He bought it off eBay so I'm guessing that the insurance was unavailable for him. Or would T-Mobile US look at his phone and troubleshoot it?
Thanks in advance for any information.
Sent from my HERO200 using XDA App
best thing he could of done is to immediately remove the battery and let the phone dry out for a few days. I would do that now anyways. Then put the battery back in, let it charge, then try to turn it on. If its really just the screen, yes they are replaceable, but make sure he gets the lcd/digitizer combo, those things are almost impossible to replace separately.
Dubbin_Irie said:
Ok so my friend has an HD2. He was at work and some prick dumped a bucket of water on him. So I got looking at his phone and it seems that the only thing wrong is that the screen will not come on.
I can get the bottom lights to come on and the volume is somewhat working. But the screen will not light up at all. My question is... is there a way to buy a replaceable screen? He bought it off eBay so I'm guessing that the insurance was unavailable for him. Or would T-Mobile US look at his phone and troubleshoot it?
Thanks in advance for any information.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
how do you know the screen is the problem? could be one of the many chips on the main circuit board could be fried. In my humble opinion, take the battery out and let it sit for about a week in a nice dry area. try it after a week or so and if it still don't work, sell it for parts on ebay.
I think you'd be wasting your money, especially if you have never tried taking one apart before. I've fixed a few phones before but the thought of opening up my HD2 makes me cringe!
hey thanks for the response we will give that a go. and hopefully that works but ill start looking up prices on the combo now. thanks again
The best thing yoiu can do for a wet phone, like previously stated is take the battery out, and stick it in a tub of rice for atleast a few days. this will draw moisture out of the phone.
I must have been lucky. I dropped mine in the toilete 1 drunken night. it came out still on and working, then the volume started adjusting itself and the screen was going funny. 24 hoiurs in rice and it was fine except for a dodgy volume button which sorted itself within another day.
If its still not working correctly, you mayb have to send it into htc for repair and get the idiot who poured a bucket of water to pay for the repair.
I just noticed a moment ago that when I tap my phone hard enough it turns off. For example sliding the kb open or setting it down on a table hard enough. I have to be real gentle with it now. And I have never been very rough with it its in great condition. I dropped it once on carpet a few months ago. But that's it. I have 2 batteries and I switch them out every other day. Could that have something to do with it? I really do not want to goto the sprint store and have the look at it because ill have to flash back to stock and deal with their lines and annoying staff. Anyone know what I can do to fix this issue?
Sent from my SPH-D700 using XDA App
Is it possible that you thumped it hard enough to knock it unconscious? Just kidding, sounds like you have a short somewhere.
Sent from my SPH-D700 using XDA Premium App
screw that. flash it back to stock and take it in. i wouldnt be able to deal with that.
^^ I agree
However, take a look at your battery contacts. One of my 3 is noticeably bent "differently" but not necessarily broken than the other 2 (although it's NEVER lost contact even in a fall). Maybe it's not maintaining the tension it needs to keep the connection.
kycrop44 said:
I just noticed a moment ago that when I tap my phone hard enough it turns off. For example sliding the kb open or setting it down on a table hard enough. I have to be real gentle with it now. And I have never been very rough with it its in great condition. I dropped it once on carpet a few months ago. But that's it. I have 2 batteries and I switch them out every other day. Could that have something to do with it? I really do not want to goto the sprint store and have the look at it because ill have to flash back to stock and deal with their lines and annoying staff. Anyone know what I can do to fix this issue?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Happens to me when I close the keyboard too hard so I put a piece of thin cardboard between the cover and battery to secure it even more and no more problem.
kennyglass123 said:
Happens to me when I close the keyboard too hard so I put a piece of thin cardboard between the cover and battery to secure it even more and no more problem.
Click to expand...
Click to collapse
doesnt paper heat up the battery more? and i think the OP should place a claim on the phone (you should too). you people paid a lot for your phone and it should work (without putting cardboard)
alexnaoumi said:
doesnt paper heat up the battery more? and i think the OP should place a claim on the phone (you should too). you people paid a lot for your phone and it should work (without putting cardboard)
Click to expand...
Click to collapse
your right I did pay alot for this phone and it should work properly without ghetto rigging it. It actually stopped for now idk what did it, I tried a number of things including pressing the battery in harder and that may of solved it, but I bet it does it again one day. plus I wouldnt mind having a brand new one if thats what they would do to fix it lol
That happened to me a couple times, but it was the extended batteries and thus generic cover that doesn't fit well to begin with.
alexnaoumi said:
doesnt paper heat up the battery more? and i think the OP should place a claim on the phone (you should too). you people paid a lot for your phone and it should work (without putting cardboard)
Click to expand...
Click to collapse
Then don't cover the whole battery. Use a small strip runnin diagionaly and fasten it to back cover is it don't move around when u drop your phone again.
Try a little peice of paper in between the batt and the wall of batt hole.
Epoxy your battery in place.
Or u can stop abusing your phone.
Tell your phone your sorry..
Sent from my SPH-D700 using XDA App
alexnaoumi said:
doesnt paper heat up the battery more? and i think the OP should place a claim on the phone (you should too). you people paid a lot for your phone and it should work (without putting cardboard)
Click to expand...
Click to collapse
Not anymore than sitting on my hip. Paper is an insulator so actually would help in Florida sun. But my issue is a $21 extended battery and extended back, not stock. So a small piece of cardboard helps to keep it really tight. Also probably because I have dropped my phone a few times.
keith5039756827 said:
Then don't cover the whole battery. Use a small strip runnin diagionaly and fasten it to back cover is it don't move around when u drop your phone again.
Try a little peice of paper in between the batt and the wall of batt hole.
Epoxy your battery in place.
Or u can stop abusing your phone.
Tell your phone your sorry..
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
LMAO!!!! Nice...think I will download a flowers jpg for my phone now.
My first epic did this. It's a manufacturing problem. I took it back and sprint replaced it. (I returned it the day after I bought it, though).
I have had this happen to me and all I did was flash a different rom. It seemed to be a had flash or the rom I was using. That is assuming you are rooted and running a custom rom. Give it a try. Flash something else and see if the problem goes away. Mine did.
I was on my way into the sprint store as I was restoring a different rom and after restoring i could not reproduce the power down when bumping or sliding keyboard. That's how I figured out it had to be the rom. I have not had it happen since, that was 5 months ago.
desire s turns off
Ive had my desire s for less than 2 months and ive had to leave it back for this reason. The slightest of taps to the bottom right corner and off it goes.
Estimated return time from the car phone warehouse is 1 month. whahahahah....
Mine does the same thing, bougt mine off ebay, esy fix I just took a very small piece of electrical tape, made it so its sticky on both sides and stuc it behind the battery
Sent from my SPH-D700 using XDA App
I had this problem also. Mine was one of the three contacta on the phone broke. The brass contacts that touch the battery.
Sent from my SPH-D700 using XDA App
kennyglass123 said:
But my issue is a $21 extended battery and extended back, not stock
Click to expand...
Click to collapse
Same here! With the stock battery it works fine, but with the extended to hard of a jolt will reset it.
So I do a lot of reading on this forum but rarely post.
Last night, my phone fell out of my hands while I was sitting outside the hottub and went right into it. It was like how something falls to the bottom of the ocean in a movie. I got it out right away dried it off, took out the battery and sd card and looked at it.
It seemed that no water got into the system at all. The phone works just as it did when before the dive. The only thing that is touchy is the charger now, but oh well.
Samsung ftw
My friend dropped his Incredible in tea. He thought the same thing, but now, the phone reboots itself when it gets warm at all, and if it gets cold, the touchscreen becomes unresponsive. It was stupid to turn it back on. You should have immediately stuck it in dry rice and never turned it on, as that can prevent damage from happening.
Yeah, regardless of manufacturer/model, never turn a dunked phone on until you're 100% sure it's as dry as you can possibly get it.
Pull the battery and SD card, then shove the whole mess into a bag of white rice for AT LEAST 24 hours, more if you can. The longer it sits in the rice with no power, the more likely it is to survive the dunking.
Nah dehumidifier is better lol
Sent from my SCH-I500 using Tapatalk
Anyone know of any cell phone shops that have a wet phone recovery service?
I would place the phone inside a small pressure vessel and pull a deep vacuum for 15-20 mins (or until I archived 1000µm). Then break the vacuum with dry nitrogen. Repeat 3x's.
This is the method for pulling moisture out of refrigeration systems and it does work well.
I would think a small phone shop could easily get $50 a pop to save someones phone.
Hope yours stays happy! good luck
Hair dryer.
Sent from my CM7 SCH-i500
dw77x said:
Anyone know of any cell phone shops that have a wet phone recovery service?
I would place the phone inside a small pressure vessel and pull a deep vacuum for 15-20 mins (or until I archived 1000µm). Then break the vacuum with dry nitrogen. Repeat 3x's.
This is the method for pulling moisture out of refrigeration systems and it does work well.
I would think a small phone shop could easily get $50 a pop to save someones phone.
Hope yours stays happy! good luck
Click to expand...
Click to collapse
I would worry about the screen in a vacuum.
If it were my phone though, I would completely disassemble it and make sure I got all of the water out that way, maybe hit it with some 99% isypropal to help get any water out from under chips and in tight places, and let it dry for a few days in silica beads.
A hairdryer is a horrible idea. It can't pull the water out. On the contrary, it's more likely to force the water into worse places.
Sent from my SCH-I500 using XDA App
xmrbonesx said:
A hairdryer is a horrible idea. It can't pull the water out. On the contrary, it's more likely to force the water into worse places.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
And cook the inside components. hehe forgot the /sarcasm tag. I'm not stupid
Sent from my CM7 SCH-i500
I'm not so sure about the phones, but my samsung led tv survived a house fire... Pretty proud of that little purchase.
Sent from my SCH-I500 using XDA Premium App
sageDieu said:
And cook the inside components. hehe forgot the /sarcasm tag. I'm not stupid
Sent from my CM7 SCH-i500
Click to expand...
Click to collapse
I know that, but there are people that will blindly follow anything they read on these boards, and I've seen a hairdryer suggested before.
AlexDeGruven said:
Pull the battery and SD card, then shove the whole mess into a bag of white rice for AT LEAST 24 hours, more if you can. The longer it sits in the rice with no power, the more likely it is to survive the dunking.
Click to expand...
Click to collapse
Rice is a good option and works well, but the small silica packets that are used as desiccant work even better and can be purchased very cheaply.
Putting your phone in some sort of vacuum or near-vacuum is probably a bad idea because the hardware was likely not designed to withstand such conditions.
Sent from my SCH-I500 using XDA App
Ok guys update.
So its been what a couple of days now, and my phone is working pretty good. all the main things work. the only thing that is a little touchy is the charger, and it keeps saying usb connected, but i can live with that.
I uses to work at a sign shop and my bosses kids were terrible about throwing phones in water so he found the little pink water detector strips so I know if you do that you can put it on and trade out your phone
Sent from my SCH-I500 using XDA Premium App
Golgotha theskull said:
I uses to work at a sign shop and my bosses kids were terrible about throwing phones in water so he found the little pink water detector strips so I know if you do that you can put it on and trade out your phone
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Probably super illegal or at least in violation of like everything in the contract you sign about insurance and replacements. Lol
Sent from my CM7 SCH-i500
sageDieu said:
Probably super illegal or at least in violation of like everything in the contract you sign about insurance and replacements. Lol
Sent from my CM7 SCH-i500
Click to expand...
Click to collapse
I second that LOL.
Anyways, I just want to say Samsung FTW because this phone has just been amazing in so many ways. Abilities to super customize in any way, shape and form, awesome screen...I was VERY hesitant on buying an all touch screen phone. Coming from a Blackberry Tour I was very use to a real keyboard and buttons. Yes this phone has it's up's and downs, but all in all the pros really out weigh the cons.
I'm in absolute NO rush to get a new phone any time soon. I love my Fassy
for those interested out of boredom me and a co-worker decided to take apart his nexus s
so without further adu here is a step by step photo tutorial breakdown
break down continued
series two of the break down
Reserved for OP
all pieces broken down
I'm scared to take mines apart, haha. But it does look fun and interesting to find out what's inside.
Haha. Cool.
Sent from my Nexus S 4G
newalker91 said:
As a Sprint Technician, this is by far my favorite thing to do. Even if it isn't necessary, I always dismantle phones and rebuild them just for the hell of it. Many times it'll often fix a lot of small glitches due to faulty assembly in the factory. (i.e.- touch screen bugs, dead keys on physical keyboard, speaker static, etc)
Click to expand...
Click to collapse
I wouldn't mind learning on how to do that kinda things. I'm a full on techy person, but I don't have the experience on doing that. But I do learn quick though. I would be happy to be a sprint technician. Ha.
Sent from my Nexus S 4G
I love how open this phone is. Standard #00 phillips screws, and no warranty sticker!
newalker91 said:
All Samsung phones are like that. Very easy to dismantle them and interchange parts. HTC phones are next in line for ease of modding, although it requires the star tip screwdriver which can be tricky to get your hands on. They do although use tamper dots on one screw to know if you opened it, but you can order those online and put it on a screw head to trick it. Sanyo use the triangle tip and quite frankly are made of **** parts so half the time something falls apart when opening it delicately. Motorola is kinda finicky. Blackberry and Palm you aren't even able to open without destroying something, they don't play nice.
Tip to keep your phone running well: open it every few months, use a stiff paintbrush and gently clean all exposed copper with rubbing alcohol and then use compressed air to dry it completely. This helps keep electricity flowing smoothly without interruption by corrosion. It can also prevent shorts and lower heat. Just don't turn it on with any alcohol still on it or you'll fry the phone and don't brush too hard and knock anything off.
Click to expand...
Click to collapse
I work at an industrial supply company. We're the ones who ship the screws and tools to the manufacturers.
Sent from my Nexus S 4G using XDA Premium App
shoot send me some tools heck It would make it alot easier to dismantle certain devices for break downs
HEY! How'd you get my mousepad??
Thanks for the pics though!
cybertang said:
shoot send me some tools heck It would make it alot easier to dismantle certain devices for break downs
Click to expand...
Click to collapse
Let me know what you need, ill put in an order for 'em. 10% over cost.
Sent from my Nexus S 4G using XDA Premium App
Story of my day everyday. As a corporate Sprint tech I take apart around 50+ phones a day.
It's become next to nothing to open any small electronic now...and a few big ones haha.
Sometimes I feel like I'm doing a tear down for liquid damage in my sleep.
I've done it for 7 years now and have been such a good harvester that I've kept my exchange rate down to 18% constant due to my efforts.
so.... did you see why people are having issues with signal?? is there a crappy antenna? etc.
tearing apart a sprint phone is easier than building lego's if you actually feel like doing it.
just don't tear the ribbon.
TheNexxuvas said:
Story of my day everyday. As a corporate Sprint tech I take apart around 50+ phones a day.
It's become next to nothing to open any small electronic now...and a few big ones haha.
Sometimes I feel like I'm doing a tear down for liquid damage in my sleep.
I've done it for 7 years now and have been such a good harvester that I've kept my exchange rate down to 18% constant due to my efforts.
Click to expand...
Click to collapse
thats whats up! going 2 years strong here. 3rd party 50+ phone a day aswell down to 23% taking phones apart is like cake now too and it got me thinking i need to touchstone my nexus like i did my epic
now if only slate was more useful..
newalker91 said:
Antenna is fine, just software bugs. Miscalculation of available signal causing the phone to think it doesn't have signal when it really does. There's a fix in the works already.
Click to expand...
Click to collapse
do you know when it will hit the streets?
thanks!
ck
newalker91 said:
I do everything within my power to harvest parts and build up a stock of pieces I need, but we can't do any micro-soldering and the damn Evo charging port effs up my exchange rate consistently. Can't harvest motherboards so bleh. A lot of the powercycling problems and such as well are caused by faulty circuits and once again cannot be fixed. Do you have any tips?
Click to expand...
Click to collapse
None anymore, there was the old Palm circuit board switcharoo, but the newer models don't offer that. I harvest like a mad man though, even Pre sliders, pre earpieces on the top board/screen and things that many are too afraid to harvest (Blackberry tour/bold screens).
Soldering kits are being pulled from the stores too, since we've been scaled back to only soldering old pin charger ports (I still solder wires for earpieces and vibe motors) and those are now defunct.
If blackberry and htc hadn't screwed us over by taking away our soldering efforts with their models, we'd still be doing them today, but, thems the breaks. Hurts both techs and customers but maybe down the line they will rethink it and go with the soldering machines that are used at the warehouse to put new ports on. I'd dance a bit of a jig that day. And I absolutely hate the new standard mirco usb ports, absolutely too small and too fragile and they are on every phone now. Need to go back to mini usb, which was much sturdier. I haven't charged a phone on a cable in years. Cadex or Wall dock chargers for me.
Gives me better battery life, and since I always run 2 batteries I go to work everyday with a fully charged one. Can't beat it.
Well, is it possible to replace the wifi radio in my Nexus S 4G?? The low range and disconnects are killing me! I dont mind voiding my warranty.
d94 said:
thats whats up! going 2 years strong here. 3rd party 50+ phone a day aswell down to 23% taking phones apart is like cake now too and it got me thinking i need to touchstone my nexus like i did my epic
now if only slate was more useful..
Click to expand...
Click to collapse
Ha! Slate my friend is garbage!!!! Lol
Sent from my Nexus S 4G using XDA App
ddpacino said:
Well, is it possible to replace the wifi radio in my Nexus S 4G?? The low range and disconnects are killing me! I dont mind voiding my warranty.
Click to expand...
Click to collapse
Radios and chipsets are embedded into the circuit boards now, they aren't on a socket like CPU's on a computer motherboard, so no, sorry, that's not a removable/replaceable part.
Help
newalker91 said:
All Samsung phones are like that. Very easy to dismantle them and interchange parts. HTC phones are next in line for ease of modding, although it requires the star tip screwdriver which can be tricky to get your hands on. They do although use tamper dots on one screw to know if you opened it, but you can order those online and put it on a screw head to trick it. Sanyo use the triangle tip and quite frankly are made of **** parts so half the time something falls apart when opening it delicately. Motorola is kinda finicky. Blackberry and Palm you aren't even able to open without destroying something, they don't play nice.
Tip to keep your phone running well: open it every few months, use a stiff paintbrush and gently clean all exposed copper with rubbing alcohol and then use compressed air to dry it completely. This helps keep electricity flowing smoothly without interruption by corrosion. It can also prevent shorts and lower heat. Just don't turn it on with any alcohol still on it or you'll fry the phone and don't brush too hard and knock anything off.
Click to expand...
Click to collapse
Seeing that you are a repairs technician for sprint, I was wondering if you would be able to help me with a micro USB problem on my nexus s 4g?
Hello everyone,
I got this problem with my LG G2 that it fell in the water once, I directly put off the phone. (It was still intact after falling in water).
Later I turned it on but the screen did not show up. Sound works, Vibration works, TOUCH screen works (no graphical stuff) and even if I call my self with another phone the LG goes off, vibrates, plays the ringtone and everything.
I sent my phone to Dynafix which is the repair center, they said it's not available for warranty, because its water damage and they declared the phone as "Unrecoverable". Which I think is pretty weird. I have thought of repairing it myself by buying and new LCD and Digitalizer.
(w w w . etradesupply . com/lg-g2-d800-lcd-screen-and-digitizer-assembly.html)
I have never done that though but with a good tutorial on YouTube and the right tools I should be able to do it. But before I take any action which may not work I want more info about this problem.
I made a video of my phone but can't post any links here, the name is: "LG G2 screen doesnt go on? [HELP!]"
Thanks:good:
Don't waste your time or money on this. If it was completely immersed in water, it is in fact unrecoverable. The water might not have an effect on the device the first couple of hours, but after a short while it will corrode it's way trough the device, rendering it useless. The repair center won't touch it because they know that no matter what they do, there is a huge risk that the corrosion will come back. You're better off with a new device.
Sent from my LG-D802 using XDA Premium 4 mobile app
Really?
se1988 said:
Don't waste your time or money on this. If it was completely immersed in water, it is in fact unrecoverable. The water might not have an effect on the device the first couple of hours, but after a short while it will corrode it's way trough the device, rendering it useless. The repair center won't touch it because they know that no matter what they do, there is a huge risk that the corrosion will come back. You're better off with a new device.
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The phone in on the charger and on, Everyday I still hear sounds and such. The phone hasnt been in water more then 1 sec though. And afterwards I left it drying in dry rice for 1 week. I know i am a bit selfish but I think there could be a chance of making it work.
The phone comes with a subscription for 2 years and it's not even a year old ;/
se1988 said:
Don't waste your time or money on this. If it was completely immersed in water, it is in fact unrecoverable. The water might not have an effect on the device the first couple of hours, but after a short while it will corrode it's way trough the device, rendering it useless. The repair center won't touch it because they know that no matter what they do, there is a huge risk that the corrosion will come back. You're better off with a new device.
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not exactly the same but a friend was skipping lessons at school when we were like 10 (10ish years ago) and using Gameboy Advance SP in the toilets... you can guess what happened... Any way i took it apart and left it in a closet for a few days, gave it back to him fully working after. So it's not necessarily un-fixable.
WPG2 said:
The phone in on the charger and on, Everyday I still hear sounds and such. The phone hasnt been in water more then 1 sec though. And afterwards I left it drying in dry rice for 1 week. I know i am a bit selfish but I think there could be a chance of making it work.
The phone comes with a subscription for 2 years and it's not even a year old ;/
Click to expand...
Click to collapse
How fast until you took it apart? Also, did he remove the batteries quickly after water exposure? I'll bet that's not the case with the phone here...
Sent from my LG-D802 using XDA Premium 4 mobile app
Didn't remove battery, just the back cover
se1988 said:
How fast until you took it apart? Also, did he remove the batteries quickly after water exposure? I'll bet that's not the case with the phone here...
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well yeah, I just turned it off got the back cover off but not got the battery out. and let it dry.
Is there any way to acces the phone's screen through my PC? The phone is rooted.
Fixed the phone!
I removed the main board from the phone and brushed the connections with a toothbrush. Re-assembled the phone and it worked!
The only money I spent is for a plastic opening tool and a philips screwdriver.
pho . to/5mF1y <- link for pics