[Q] No response from, touch the screen - Touch HD General

Hi ,
My Touch HD has problem after i talked in rain. Maybe some rain got inside the phone. The problem is no response when i touch the screen. It can properly boot up and I can see the windows screen. I want to know is it the screen problem or another components damage?
Thanks in advance!!
vxxxxx

vxxxxx said:
Hi ,
My Touch HD has problem after i talked in rain. Maybe some rain got inside the phone. The problem is no response when i touch the screen. It can properly boot up and I can see the windows screen. I want to know is it the screen problem or another components damage?
Thanks in advance!!
vxxxxx
Click to expand...
Click to collapse
Nobody can know if that's the problem, maybe some pic's would help? I'm not a masterpiece in hardware talk, but probably the screen digitizer is broken (since there is no response). If you can switch the digitizer, there's some for 30,00 € in e-bay :/
Oh, did you install a ROM recently? Might be a bad flashed one

Related

Touch screen problem ?

Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
hello
do the screen alignement , it helped for me
grtzzz
you can find this in settings___system ___ screen and choose align
Like I said, I already did the re-alignement. But it didn't solve my problem.
touchscreen problem
hello,
u can try to update the rom , maybe that could be a solution , you find it in the wiki of the prophet on how to do it
grtzzz
grey
dizzy33 said:
Hello, I bought a second hand prophet. But I have a problem with the screen : the screen does not respond exactly where I put the pen. For exemple, on the keyboard, if I put the pen on the "E" key, it is the "D" wich is pressed ...
This only happen in the middle of the screen. No problems on the top or the bottom of it.
Of course I tried to re-calibrate the screen many times but it does not solve the problem.
Does anyone know where does this problem come from ?
Thanks a lot !
Click to expand...
Click to collapse
Well it is very likely that your touchscreen is damaged but not your LCD. There is actually 2 portions to the screen which most ppl assume there was only one(well I did initially until finding out later when my screen broke and got it replaced). Anyway, if you've tried re-calibrating it and doesn't work..maybe your screen protector (if you do use one) maybe be at fault? Other than that, worse case scenario, it is your touchscreen that is physically damaged. FYI it is not really expensive to replace compared to the LCD part.
Speak to njbridges if you need to get it replaced.
http://forum.xda-developers.com/showthread.php?t=323981
I already upgraded the ROM to latest french version ... It didn't help in that.
Anyway, thanks a lot for your answers !
I had the same problem. Unfortunately it was a problem with the touch screen which was fixed under warranty.
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
beer2nd said:
the simply answer is
try to change ur screen protector, or just remove and re-put it on again
just try...
Click to expand...
Click to collapse
Hello.
I tried to do that, because I had problems to align screen.
I changed the touchscreen with another from a broken LCD. But now all I can get is a white screen, then a sound (like the starting sound when you make a hard reset or remove batery) and after black screen again.
What can I do to bring it back.
I've noticed that the touchscreen had some white glue where is the connection with the LCD. Do I need to replace that glue, maybe is a special glue with small voltage conductibility ? Or ? Help!
Anyone changed the touchscreen ?
PS: I think I will start a new post, maybe I will get some answers!
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
P4k1t0 said:
i haved thar problem... like you.... i just bought an ney TOUCH SCREEN new... and it was solved.... ATENTION only the touchscreen... not the lcd!
Click to expand...
Click to collapse
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
saxxen said:
When you buy a new touch screen you buy with some conectors or only the plastic rectangle ?
Click to expand...
Click to collapse
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
P4k1t0 said:
well... i have to cut with a scissors the conecters to conect right on lcd screen... and it worked
Click to expand...
Click to collapse
When you say cut it means that a part of the conectors still remain on the touchscreen (under the touchscreen). Or no conectors at all on the touchscreen and that means you removed the connectors (pulled out).
Do you know if I have any chance to take another touchscreen from a defect device and work ?

Touch screen doesn't function

I need your advice...
My Touch Screen doesn't function, I cannot dial out, Faulty LCD or Touch Screen (or both), While I click on the screen it doesn’t respond or it has a shift, I click on the top of the screen and it actual click on the middle of the screen.
I have no problem with the display - it display everything and correctly with full color.
What I think is that I have a problem with my touch screen.
Did anyone had a problem with the touch screen and replace it?
What is strange, when I hrad reset the device, on screen alignment process I have no problem to click on the cross, but it takes the device up to 3-4 times to aligen the device.
I want to order the touch screen part and replace it, I don't have warranty.
Do I need to replace the LCD as well or just the touch screen? Either way it will be cheaper to buy them both then to send it to repair.
when the backlight is off...and you hold the phone 20 cm for your eye`s and turn a bit up and down in a room with light...can you see a oil film on the screen...???
that is the digitizer....sorry german english..
[email protected] said:
when the backlight is off...and you hold the phone 20 cm for your eye`s and turn a bit up and down in a room with light...can you see a oil film on the screen...???
that is the digitizer....sorry german english..
Click to expand...
Click to collapse
First - thanks for your time and for your help.
Well I don't understand what do you mean by saying, "can you see a oil film"
When the backlight is off (black screen - the device is on stand by) - I can see only black screen and my reflection...
Sorry...my english...So look in that thread and you understand what i mean...
http://forum.xda-developers.com/showthread.php?t=475294
i have it send in repair because of warrenty...but on ebay...you can buy for 30 €
when the problem is that...but i dont know...i hope that is helpful
I don't have this oil or bubbles on my screen...
Hardware...Connector(cable)....Software(Rom).....did you flash it..??
Sorry i don`t know...
I hope you find it
I can eliminate the software, I try to flash it with several roms and radios, include the origanl HTC shipped rom.
Well I ordered the LCD+Touch screen, waiting for this parts and then I will see.
Thanks for your help
i have similar problem but my screen is decentered just few milimerts
i sent it to waranty check twice but it came back that no problems apear
when i center display it its ok but max for 1 day or even less
so im currious if changing LCD will help ...
kobein said:
so im currious if changing LCD will help ...
Click to expand...
Click to collapse
I will let you when I will replace the Touch Screen with or without the LCD.
This should help........did this a few months ago, all working fine with no problems.
Check this out....
http://forum.xda-developers.com/showthread.php?t=392301&highlight=digitizer
ProvRobbie said:
This should help........did this a few months ago, all working fine with no problems.
Check this out....
http://forum.xda-developers.com/showthread.php?t=392301&highlight=digitizer
Click to expand...
Click to collapse
I ordered from the same store "keep_beauty", and they already shipped it, I looked in your recommendation and his guide.

My Diamond 2 broken touch

Hi.
My Diamond 2 has stopped working with touch screen commands.
Problem:
The upper layer of touch screen somehow separated from some part inside, and phone doesn't react to touch commands.
It's same as you take for example transparent label and stick it to some glass and in some places you see bubbles, but it's much bigger area.
Solution:
Phone going to service.
Anyone had same problem with your phone ?
Image attached.
Joker2206 said:
Hi.
My Diamond 2 has stopped working with touch screen commands.
Problem:
The upper layer of touch screen somehow separated from some part inside, and phone doesn't react to touch commands.
It's same as you take for example transparent label and stick it to some glass and in some places you see bubbles, but it's much bigger area.
Solution:
Phone going to service.
Anyone had same problem with your phone ?
Image attached.
Click to expand...
Click to collapse
..like michael jackson song: You are not alone...http://forum.xda-developers.com/showthread.php?t=522813&highlight=broken
Digitiser...
You can get a brand new housing and digitiser from eBay for £24.99... I've just ordered one for mine. Unfortunately, they come from Hong Kong, so I have to wait a couple of weeks but my device will be like new again! You may be able to but just the digitiser without the housing... worth a look
Short term solution is to pull apart with duct tape until newton rings disappear.
grahamkdt said:
You can get a brand new housing and digitiser from eBay for £24.99... I've just ordered one for mine. Unfortunately, they come from Hong Kong, so I have to wait a couple of weeks but my device will be like new again! You may be able to but just the digitiser without the housing... worth a look
Click to expand...
Click to collapse
What do I exactly search on ebay ? Got link where did you buy ?
And how do you replace it ?
Joker2206 said:
Hi.
My Diamond 2 has stopped working with touch screen commands.
Problem:
The upper layer of touch screen somehow separated from some part inside, and phone doesn't react to touch commands.
It's same as you take for example transparent label and stick it to some glass and in some places you see bubbles, but it's much bigger area.
Solution:
Phone going to service.
Anyone had same problem with your phone ?
Image attached.
Click to expand...
Click to collapse
Same on my device, I will send to service.
Can anyone confirm a new digitizer fixes the problem? Seems like it would, just don't want to tear my phone apart and wait 2 weeks for one to find out it's something else.
Daisjun said:
Can anyone confirm a new digitizer fixes the problem? Seems like it would, just don't want to tear my phone apart and wait 2 weeks for one to find out it's something else.
Click to expand...
Click to collapse
Some people did confirm. Try reading post from a link that cyron wrote on first reply to me.
I've had mine repaired twice in the last 3 months with this problem. Warranty covered the repairs. Apparently according to the UK support 'it's not a common fault'. Yeah!
touchscreen can be actuated
I am Brazilian, sorry for my bad English.
I saw the picture on screen seems to be driven directly, if your appliance has pelicula try to remove it. May be keeping the touchscreen.
It happened to me.
TD2 - WM6.5 - Manila2.5 - PTG
Julio Cesar Carneiro Alves
Contagem, MG
Brasil
juliocesar.ca said:
I am Brazilian, sorry for my bad English.
I saw the picture on screen seems to be driven directly, if your appliance has pelicula try to remove it. May be keeping the touchscreen.
It happened to me.
TD2 - WM6.5 - Manila2.5 - PTG
Julio Cesar Carneiro Alves
Contagem, MG
Brasil
Click to expand...
Click to collapse
Read my last post here.
http://forum.xda-developers.com/showthread.php?p=5923901#post5923901
Same problem

Touch screen not working

Hey guys, I have been so much frustrated about my htc topaz....till now it is working perfectly. Since yesterday all of a sudden touch screen stops working...with ballooning effect on screen ...previously ballooning effect was noticed before 3-4 days,but i did not pay attention on it as touch screen working at that time..
What may be the probable cause is it digitizer or lcd screen gone?
I have uploaded the pictures also..
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
I had the same problem, is very usual in this phone. the tecnical changed the screen.
luisitron said:
I had the same problem, is very usual in this phone. the tecnical changed the screen.
Click to expand...
Click to collapse
The problem is that my phone came from China... So I would have to send it there, and that's not an option...
rvrosa said:
That's the Chinese Diamond2?
If so I have the same problem with a Chinese phone... There is a part of the screen that's not working fine (like a balloon on the left side of the screen). I have to press really hard and press more to the side than it should be
I've already considered in opening the phone to try to solve the problem.
Does anyone already opened his phone with success? Any pictures available to help the task?
indresh88, sorry to use your topic but I think we both need the same...
Click to expand...
Click to collapse
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
Please explain that better? I only have to stick some scotch tape on the screen and peel it off?? I have a screen protector, so it's better to take it?
Thanks
indresh88 said:
no definately not...it's factory unlocked asian version...also it is t5353 and official stock rom.
by the way how can we differentiate between chinese and factory unlock phone?
have you solve your problem?
Click to expand...
Click to collapse
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
rvrosa said:
I have the T5388i dual sim.
I'm no expert on those phones, but I think an easy way to know if the phone is HTC or Chinese version is the front camera side (on HTC is on the right and on the replica is on the left)
Other simple way is if it's dual sim than it's not from HTC.
If I'm telling some mistakes please someone correct me.
Concerning the problem... it's not solved
Click to expand...
Click to collapse
Well according to my research...If you have standard htc phone, you have device name t5353,no dual sim,htc written on left side and front camera on right side....
badari said:
Hi, use some standard scotch tape or tesa film. Stick it over the affected area and peel the tape off. This should unstick the digitizer again, it did the job for me quite often...
Cheers
Click to expand...
Click to collapse
it helped me quite good and temporery, but how to fix it permanently...?
replace the touch screen digitizer.
eBay have many of them...
I have replaced my cracked one last month.
Two fixes for the scotch tape issue
1. Always take along some scotch tape or
2. Replace the digitizer. This can be done faily easily, see some other posts.
Cheers
I've looked at ebay for the digitizer and I've found many... the question is if they work on my phone?
I have a DUAL SIM T5388i, can anyone point me the right digitizer?
I've tried the tape but didn't worked I don't know if I'm doing it right because I've noticed no diference.
Help me!
I also have this problem, It just stopped working. I was calling, 10 minutes later when i took my phone and tried to unlock it, it did nothing, when i connect my phone in windows 7 with mobile center, I installed SOTI pocket controller, to check if it was my screen, and it was because via pocketcontroller it worked good, but how do i have to replace the screen thing, and how does it work with the tape,,
Thanks
i also had the same problem. if im not mistaken it might be due to humidity ...
i might be wrong
is there any way to fix this without replacing digitizer.
by the way i have a TD2 t5353 htc original .
Workign Solution Till Now
Hello Friends,
I have TD2 mobile and today I had same issue. I was thinking it was because of the weather or some.
I remember it did happend several time before, but when I restart the device several time it does work. So I was ignoring.... But today it did not work.. looks like going toward end... So I did soft and hard reset without and that did not helped me.
So I switched off the mobile, "heated" the touch screen gently with my hand for 1 min and started the mobile again and it worked for me .
Not sure if this is a solution, but will work.
May be I will contact Service Center here in Hyderbad and see what is wrong here?
Hope this will help you all...
Thanks.
Well, I've solved the problem... changed the digitizer...
rvrosa said:
Well, I've solved the problem... changed the digitizer...
Click to expand...
Click to collapse
How much that costs you?
prabhat said:
How much that costs you?
Click to expand...
Click to collapse
Take a look at solonomi. That's the place I've bought it.
digitizer for t5388i
Hi, I want to buy digitizer for t5388i, but I didn't find it. I searched at solonomi, ebay, alibaba... Have you any ideas where to buy? Digitizer for t5388i is not same with other t5388 models. Here is picture:
imageshack.us/photo/my-images/263/digitizer2.jpg/
(sorry for incomplete link, but I don't have permision to add images or links)
Many thanks.

Some help trying to fix a Motorola Defy?

Hello, I have a Motorola Defy, that I dropped a few times, so the LCD screen got damaged with blue dots on it, I made a mistake and thought that the problem was on the touch Screen, so I purchased a replacement, installed but, it was damaged, the touch did not respond correctly, I wasn't able to type correctly among other problems.
I got a refund, then ordered a LCD screen replacement, now that I have it here, I install it, and it's broken:crying: I know, bad luck and being a rookie while trying to fix my phone, ok, I put back my old (damaged) LCD screen to use it in the meantime, and the old touch screen, but now, the old touch screen that was supposed to being working fine, it doesn't, it has the same problem as the touch screen that I bought.
Question is: the problem with the touch screen, could be related to the damaged LCD screen? or the motherboard of the phone is damaged? the phone works great, the apps, the games, everything but the touch screen and the LCD screen, but, as I said, I went back to the default touch screen after using the damaged one that I received, and it works worse I don't know what's wrong, please help me out, sorry for the long post
Please post questions in the Q&A section. Moved there.
Put it in the freezer for 1-2 hours
Sent from my MB525 using xda app-developers app
ppero196 said:
Put it in the freezer for 1-2 hours
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Is this true?
true. fix some minor dead pixel if you put in freezer for one day. but your case... im dont hope much.
Try changing LCD + Capacitive Digitizer. (after trying the freezer trick ofcourse)
Well i will tell my story, which is related to your's as well,
i had a phone with resistive touch screen and it got screwed up, that is it does not respond correctly. So, i took it to the service center and they replaced the digitizer (touch screen) saying that previous one is broken. But, luckily the new one didn't responded to any touches they make.So, they replaced it again with the old one quoting that "your phone can't be repaired". So, i took it home with me.
Later i thought to calibrate the screen but the old one is not responding any more, no matter where i press
Later i calibrate it with the help of a software for windows mobile with the help of a PC. It took me to the calibration screen, from where i calibrated it, and voila, it worked... as good as a new one :victory:
long story short,
i think when you disconnected your digitizer, phones default values/drivers got messed up and are unable to find the new or the old digitizer you connect. I suggest you to go to the service center as these screens can not be calibrated.
Is there NO WAY at all to recalibrate the screen from the phone itself? or using an application? the delicalibration might be the problem....I'd like to fix it myself :/ thanks for the tip, never heard about it before!!
saman0suke1 said:
Is there NO WAY at all to recalibrate the screen from the phone itself? or using an application? the delicalibration might be the problem....I'd like to fix it myself :/ thanks for the tip, never heard about it before!!
Click to expand...
Click to collapse
Did you change the LCD and the Digitizer (both of em) again ?
dark_prince said:
Did you change the LCD and the Digitizer (both of em) again ?
Click to expand...
Click to collapse
I replaced my original digitizer screen for the one I ordered it, it gave me problems, so I went back to the original one, which was working fine, and now it's not fully responding, that's why I'm assuming is something calibration related, thanks!
help
my search button back light is not glowing ..i saw it is also not glowing in recovery...any help

Categories

Resources