[Q] Help mw pls!!! - P3600 General

I want to remove Olipro 3.20 from my HTC P3600i
How can i do??
(Sorry for my bad english)

gotji said:
I want to remove Olipro 3.20 from my HTC P3600i
How can i do??
(Sorry for my bad english)
Click to expand...
Click to collapse
you need downgrade to Olipro's Hard-SPL 1.20 or Olipro's Hard-SPL 1.30

Olipro 1.2
But i try to run SSPL it show black screen
it not show tri-screen.
How can i fix it ???

gotji said:
Olipro 1.2
But i try to run SSPL it show black screen
it not show tri-screen.
How can i fix it ???
Click to expand...
Click to collapse
to fix it, you can look post at http://forum.xda-developers.com/showpost.php?p=4353623&postcount=1

This link was expire. Do you have any link??

gotji said:
This link was expire. Do you have any link??
Click to expand...
Click to collapse
I am very sad... for not knowing the other links (mirrors), we suggest you try making your own NBH file to recover stuck HardSPL 1.20 by following the instructions given

Thx. I will try it

Related

CID unlock problem

Please how unlock the CID .... upgrade (downgrade) is no funkcion.
I have 1.8. WWE version HTC and I like dopod ROM...
thank you very much
check:
http://www.imei-check.co.uk
I know a way to let Hermes to get SUPERCID by using HTC_Hermes_SIM_Unlock_v2a,can I use this software to unlock the Herald CID?Thanks!!!
ywl3k said:
I know a way to let Hermes to get SUPERCID by using HTC_Hermes_SIM_Unlock_v2a,can I use this software to unlock the Herald CID?Thanks!!!
Click to expand...
Click to collapse
it can't!!!!!!
wlinsong said:
it can't!!!!!!
Click to expand...
Click to collapse
100% positive????
wlinsong said:
it can't!!!!!!
Click to expand...
Click to collapse
So,How Can I do that?I want to get one,and flashed the USA rom.Only can supercid can do it?!
ID64 said:
100% positive????
Click to expand...
Click to collapse
Now we cannot do it.
Hi Can anybody please provide me with some information on howto unlock Herald with http://www.imei-check.co.uk/... ?
I have bricked my Herald, can only get into Bootloader - Is it possible to do the unlock when no System is installed ?
THX !
Sorry but with iemei-check you need to have OS running, and have to have an ActiveSync connection, READ what is said on the site itself, you could have found the awnser yourself

Need HELP WM6 Feeler

HELP
i tryed to flash WM6 on my SP3i, i used this manual and files http://www.geocities.com/gggbitonti/typhoon.htm
after first step my device went into bootloader and i can`t do anything with it..
i tryed to flash oficial rom (2003), but it not takes me effect
My device is not Cidunlock
Sorry for my English
felicita said:
HELP
i tryed to flash WM6 on my SP3i, i used this manual and files http://www.geocities.com/gggbitonti/typhoon.htm
after first step my device went into bootloader and i can`t do anything with it..
i tryed to flash oficial rom (2003), but it not takes me effect
My device is not Cidunlock
Sorry for my English
Click to expand...
Click to collapse
what dose is say on the bootloader
rickwyatt said:
what dose is say on the bootloader
Click to expand...
Click to collapse
Typhoon
IPL 1.00
Typhoon
SPL 2.5.0107
Typhoon
felicita said:
Typhoon
IPL 1.00
Typhoon
SPL 2.5.0107
Typhoon
Click to expand...
Click to collapse
You must make SuperCid!
http://www.user.cityline.ru/~ronswens/Tutorials.htm
Reply With Quote
moalesipufos said:
You must make SuperCid!
http://www.user.cityline.ru/~ronswens/Tutorials.htm
Reply With Quote
Click to expand...
Click to collapse
Sorry, device is SUPERCID!!!But i still can`t flash rom

White Bootloader Screen

My unit is working fine..can make receieve calls etc...
Am running on Meschle's 2.11 lite....hard reset fine everything fine...
When I try to upgrade to the full version - Gives me error...Connection.check cradle etc...
Tried Official ROM - same problem
Tried Manual Bootloader - goes into a white screen and hangs...then after 4-5 minutes i see the colored screen with IPL 3.04.0001 and SPL 1.11.000...
if I reset goes back to the ROM that was there on it...works fine...
Did I just brick my phone?
Not that I am not happy with it...but then why the Bootloader and flashing is not working?
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
NikMel said:
Try the official dopod version from here.
NOTE: it will change ipl, spl and gsm radio versions.
After that run uspl again before tryin any other rom
Click to expand...
Click to collapse
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
hehe
nice
devdarshan said:
Thanks a million...it worked re-flashing the official version now !
phew !
I think it's high time - i gave my orbit a rest rest from all the ROMming..
Click to expand...
Click to collapse
NikMel said:
nice
Click to expand...
Click to collapse
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
tongphan said:
Hi Nikmei, do you need to tun uspl first before flash the official dopod rom, thanks
Click to expand...
Click to collapse
NikMel said:
This method is only for an extreme case like when you can’t boot!
Do not use this method for update w/out the uspl.
Click to expand...
Click to collapse
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
tongphan said:
thanks , when i try to run upsl it got to 70% the the screen turn off and a pengune picture, what should i do now, thanks
Click to expand...
Click to collapse
NikMel said:
If you really want to flash your pda then you better hard reset it then uspl will work for 100%.
Normally if you run uspl you should get a blank screen and after that you can goon with the update wizard.
Click to expand...
Click to collapse
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
I can't tell you for sure if this procedure will work for your pda.
this works on artemis or p3300 or dopod p800
tongphan said:
NikMel, i have the dopod m700, try to run the upsl few times before flash to wm6 rom, every time it went to 70% the screen went off, please help
Click to expand...
Click to collapse
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Arura said:
NikMel,
you just saved me alot of money.
I just ordered a new mobile device yesterday because I thought I had bricked my device.
Fortunately I found this post and was able to reflash the device with this rom. So I have cancelled the order.
Thank you so much!!!
I would love to donate to you if you have paypal
Click to expand...
Click to collapse
NikMel said:
If you would then send it to this forum.
Sorry but I dont know how you can do it.
Click to expand...
Click to collapse
Found donate! link in the bar.
hehe OK
Arura said:
Found donate! link in the bar.
Click to expand...
Click to collapse
NikMel said:
hehe OK
Click to expand...
Click to collapse
I meant navigation bar!

Re: Bad Flash brick Pharos!

Re: Bad Flash brick Pharos!
Hi,
Sorry for my Bad English
I bricked my Pharos!
I Have a problem!
I Made my Own Pharos rom with "jose_sonseca" Totorial!
The Tutorial is bad, now start my HTC Pharos only in the "smart mobility" screen.
No Rom ( My own createt rom ) not Loaded!
how i can enter the bootloader and reflash the bad rom?
The rom gang up in the "smart mobility" screen!
No Active Sync...
Edit: SPL: 1.11Mobiz!
The phone is only one day old... ;(
Please Help...
Thx
How i can enter the Bootloader mode?
How i can reflash my Pharos?!
Please help..
Lou
O.k!
The Answear is " Soft reset and Camera!"!
I Reflash it now!
did it work the second time?
avathar behemoth said:
did it work the second time?
Click to expand...
Click to collapse
If not, upload your part02.raw, and I will try to compile it.
avathar behemoth said:
did it work the second time?
Click to expand...
Click to collapse
Works great now...
jose_sonseca said:
If not, upload your part02.raw, and I will try to compile it.
Click to expand...
Click to collapse
Can you please Upload a German Rom with original Bootsplash?
Many Thx
LouTheDuke said:
Can you please Upload a German Rom with original Bootsplash?
Click to expand...
Click to collapse
I don't have it, but it's posted here -> http://forum.xda-developers.com/showthread.php?t=420216
For the original bootsplash, I don't think that german rom have it, so apply my original bootsplash, I've posted it here -> http://forum.xda-developers.com/showthread.php?t=412324

ERROR[270]-Please help

I am trying to upgrate my trinity.
With every Rom after 1% of updating shows the following message "ERROR[270]
The image file is corrupted.Please check your update utility"
Any ideas??
Thanks
you must use hardspl
you must use hardspl
puiutz_bv said:
you must use hardspl
Click to expand...
Click to collapse
是不是没有解锁 刷spl到1.30
乌鸦炸酱面 said:
是不是没有解锁 刷spl到1.30
Click to expand...
Click to collapse
Safest to use 1.20 Olipro
I PMd you iwsidiro

Categories

Resources