[Q] Iconia A500 Parts? - Acer Iconia A500

So... I don't really want to go into the details of the thing... long story short my college roommate karate kicked my tablet down a flight of stairs (not even a cracked screen!) Acer support is... meager, at best, and the warranty doesn't cover anything hardware related.
The only part of the tablet that is really broken is the top left corner of it; where the power button resides. It's partially cracked open, and the rear-facing camera is really blurry now, condensation/cracked/not really sure. So my question is, does anyone know where I can buy parts for the tablet? As in... possibly the whole shell and the rear camera? I've looked but maybe just not hard enough.

GermanDoerksen said:
So... I don't really want to go into the details of the thing... long story short my college roommate karate kicked my tablet down a flight of stairs (not even a cracked screen!) Acer support is... meager, at best, and the warranty doesn't cover anything hardware related.
The only part of the tablet that is really broken is the top left corner of it; where the power button resides. It's partially cracked open, and the rear-facing camera is really blurry now, condensation/cracked/not really sure. So my question is, does anyone know where I can buy parts for the tablet? As in... possibly the whole shell and the rear camera? I've looked but maybe just not hard enough.
Click to expand...
Click to collapse
Nice roommate. Shoulda K-Kicked his arse, or steal his girl.
Sent you a pm with a link to the illustrated parts breakdown with part numbers. Also, you might find parts on e-bay.

Moscow Desire said:
Nice roommate. Shoulda K-Kicked his arse, or steal his girl.
Sent you a pm with a link to the illustrated parts breakdown with part numbers. Also, you might find parts on e-bay.
Click to expand...
Click to collapse
Awesome thank you, so far no luck but I'm sure eventually someone will be selling the parts. And yeah I shoulda, but **** happens And yes I asked Acer about spare parts... They seemed incredulous to the thought of an end user prying open their tablet. Something to the extent of "voids warranty" and "pay us money to replace the $10 part." Gah. Uh well, now I'm content with building my own green UI now.

Moscow Desire said:
Nice roommate. Shoulda K-Kicked his arse, or steal his girl.
Sent you a pm with a link to the illustrated parts breakdown with part numbers. Also, you might find parts on e-bay.
Click to expand...
Click to collapse
Hi! I have had almost exactly the same "accident". My 1 year daughter is responsible for that...
I'd really appreciate that link.
Thank you!!

noches_rose said:
Hi! I have had almost exactly the same "accident". My 1 year daughter is responsible for that...
I'd really appreciate that link.
Thank you!!
Click to expand...
Click to collapse
Haha, yeah bad things happen
http://forum.xda-developers.com/showpost.php?p=15326127&postcount=8
There's the link, sorry it's taken so long. It only has the part numbers, and as far as finding a vendor for those parts, it's almost impossible. Plenty of front cameras on e-bay, but no rear cameras that I've found. Let me know if you have any luck.

Related

wing for sale**cheap

kinda sick of my wing and its kinda beat up i mean nothing wrong with it except for lots of scratches on the case and stuff :-/
screens perfect and phone works fine
willing to let it go for $150
i think thats real cheap maybe someone needs a extra wing to mess around with or w.e :-/
just let me know
[email protected]
email me
alex
donate it to the "chefs" for testing roms and cooking for the community....
just kidding..
fortuni said:
kinda sick of my wing and its kinda beat up i mean nothing wrong with it except for lots of scratches on the case and stuff :-/
screens perfect and phone works fine
willing to let it go for $150
i think thats real cheap maybe someone needs a extra wing to mess around with or w.e :-/
just let me know
[email protected]
email me
alex
Click to expand...
Click to collapse
can you post a couple of pictures of how scratched up it is? I may be interested in it.
obviously i have ADD lol
as you can see from the pics >.<
but other than cosmetically the phone is fine
fortuni said:
obviously i have ADD lol
as you can see from the pics >.<
but other than cosmetically the phone is fine
Click to expand...
Click to collapse
That is pretty dinged up. One can always buy a housing though. But the ones I have seen are pretty expensive.
Maybe somebody could get this and a housing and make a How To change housing?
yea she aint pretty but im thinking someone who needs a back up phone for testing roms and such
Wow, I thought mine was in bad shape when someone said "I didn't know those came in black..." "They don't. It's frying grease that's soaked in."
hahaha. I thought I was bad with my phone. I got pissed because I got a little scratch on the screen!
If someone does have info on changing the housing, I might be interested in picking it up. I was gonna buy it to give to my dad so he'd get off his stupid Palm Treo 680 ... but if its all banged up, I would just have to keep it to experiment with then.
Well I'm a cook at one of my jobs and I'd rather keep my wing in my pocket than in my coat or car where it could get nabbed. I guess it's the lesser of the two evils. My screen is flawless though, thank you jerito... I mean screen protectors!
simplicity05 said:
Well I'm a cook at one of my jobs and I'd rather keep my wing in my pocket than in my coat or car where it could get nabbed. I guess it's the lesser of the two evils. My screen is flawless though, thank you jerito... I mean screen protectors!
Click to expand...
Click to collapse
I bought some screen protectors, but I hate them. It just doesnt look or feel right to me. I only have a small scratch on the screen too and that was because my brother threw his keys on it when it was laying in my car. I almost killed him
David-
http://cgi.ebay.com/New-Original-OE...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
You may be able to contact this seller to see if he has any instructions.
$150 for that? I'll give you $40.
Amazon was selling them new with contract for $50 - and you can pick up a tilt for only $400...
thank you vr24 for contributing to this thread with your amazing comment
-- no blaming--- edit by papamopps
Man it look like you been chewing on that phone... Either that or trying to skin concrete with it.
yeah, its pretty beat up.
How bout I recycle that thing for you for free? How many times did it go through the wood chipper?

			
				
Just outta curiosity...
Are you at least offering up a 1GB MicroSD card with the Wing?
yea theres a 1gb microSD included
bumpskies?
duprade said:
hahaha. I thought I was bad with my phone. I got pissed because I got a little scratch on the screen!
If someone does have info on changing the housing, I might be interested in picking it up. I was gonna buy it to give to my dad so he'd get off his stupid Palm Treo 680 ... but if its all banged up, I would just have to keep it to experiment with then.
Click to expand...
Click to collapse
chang the housing is very easy, torks t6 and a very small Phillips and an ipod pry tool but you can always get a nice cover from ebay gray silver black
just goolge herald service manual the one i used was from mick cannon download service manuals

Trackball Screwy

Yesterday afternoon the trackball on my N1 stopped working. it'll scroll everywhere but left. Nothing obviously wrong with it, just wont go. thought i'd give it a minute, push and play with it, see if something gives, but no dice. This morning I called HTC, no questions about bootloader which should not affect a hardware issue anyway. Having a replacement sent today.
Now I'll send this phone back, and they will assumably examine and test it. I would agree with any non-hardware issues being rejected due to unlocked bootloader, however if they contact me and say they will not cover the trackball because of this, I will bite the bullet and pay for the repair or replacement, and won't even be pissy about it. I'm just curious what HTC will do, being as this is obviously a hardware issue which unlocking cannot affect.
Seems 50/50 whether they will cover it or not really.
i had a h/w issue and an unlocked bootloader and they still charged me $55 for a replacement
good luck
As of yesterday my trackball has started being annoying, has trouble scrolling downwards, though is not completely broken. I am reluctant to do an exchange, because mine is a special import and has an unlocked bootloader.
Do you have the number for US HTC anyway?
Daswolven said:
Yesterday afternoon the trackball on my N1 stopped working. it'll scroll everywhere but left. Nothing obviously wrong with it, just wont go. thought i'd give it a minute, push and play with it, see if something gives, but no dice. This morning I called HTC, no questions about bootloader which should not affect a hardware issue anyway. Having a replacement sent today.
Now I'll send this phone back, and they will assumably examine and test it. I would agree with any non-hardware issues being rejected due to unlocked bootloader, however if they contact me and say they will not cover the trackball because of this, I will bite the bullet and pay for the repair or replacement, and won't even be pissy about it. I'm just curious what HTC will do, being as this is obviously a hardware issue which unlocking cannot affect.
Click to expand...
Click to collapse
How long did you have the phone before it got to this point? Also were you careful with the phone or (trying to find the words) a little wreckless? Just curious..
liam.lah said:
As of yesterday my trackball has started being annoying, has trouble scrolling downwards, though is not completely broken. I am reluctant to do an exchange, because mine is a special import and has an unlocked bootloader.
Do you have the number for US HTC anyway?
Click to expand...
Click to collapse
1-888-216-4736
Nexus One specific hotline. They're nice people.
ChillRays said:
How long did you have the phone before it got to this point? Also were you careful with the phone or (trying to find the words) a little wreckless? Just curious..
Click to expand...
Click to collapse
you must be an HTC insider...
this shouldn't matter it's covered for a year, no matter how he uses the trackball
zachthemaster said:
you must be an HTC insider...
this shouldn't matter it's covered for a year, no matter how he uses the trackball
Click to expand...
Click to collapse
no just curious because I myself am looking into buying this phone. I don't want to repeat someone else's mistakes (if there are any mistakes at all). Not related to this but i've heard plenty of times where someone has said "if I was a little more careful, this wouldn't have happend". I'm trying to find a bunch of those situations so I don't fall for them. Thats it..
ChillRays said:
no just curious because I myself am looking into buying this phone. I don't want to repeat someone else's mistakes (if there are any mistakes at all). Not related to this but i've heard plenty of times where someone has said "if I was a little more careful, this wouldn't have happend". I'm trying to find a bunch of those situations so I don't fall for them. Thats it..
Click to expand...
Click to collapse
oh well im a hard user of the trackball and its fine. what other things do you wanna know? ive had three of these so im a pro haha
Thanks for the number.
I can't help but wonder if me using "trackball wakeup" has contributed to this, I hope not, because it is damn handy to use.
liam.lah said:
Thanks for the number.
I can't help but wonder if me using "trackball wakeup" has contributed to this, I hope not, because it is damn handy to use.
Click to expand...
Click to collapse
i have that as well on cyanogen 506. honestly it should be fine.
if it sticks, clean the ball with a very miniscule amount of alcohol, it'll break the dirt down and youll be good to go. or just dont think about it everytime you touch it (i used to be that way and now im better off. ha)
oh and a friendly tip.
EVERYTIME you're done using the TB, WIPE IT ON YOUR SHIRT or something cloth. thats the best way to clean it. up and down on your shirt. side to side even too
zachthemaster said:
oh well im a hard user of the trackball and its fine. what other things do you wanna know? ive had three of these so im a pro haha
Click to expand...
Click to collapse
Needless to say I think i've heard every problem you could possibly have with this phone happen. From the screen cracking from a 1 foot drop to the camera app not working, to this post. However, I'm going with the n1 anyway. I'm sure that for every bad nexus one, theres 1,999 good ones. Anyway the only thing I need help with is finding a good case that will prevent damage because I have been known for dropping my phone alot.
My friends have told me to go with the "seidio innocase II" and others have said get a crystal silicone case. What do you recommend?
ChillRays said:
Needless to say I think i've heard every problem you could possibly have with this phone happen. From the screen cracking from a 1 foot drop to the camera app not working, to this post. However, I'm going with the n1 anyway. I'm sure that for every bad nexus one, theres 1,999 good ones. Anyway the only thing I need help with is finding a good case that will prevent damage because I have been known for dropping my phone alot.
My friends have told me to go with the "seidio innocase II" and others have said get a crystal silicone case. What do you recommend?
Click to expand...
Click to collapse
i just use the included neoprene case and a lot of careful handling. why dont you waltz over to cases and accessories!
but really the neoprene case is just enough for me because i like the naked look and feel of the phone. plus the case was free!
zachthemaster said:
i just use the included neoprene case and a lot of careful handling. why dont you waltz over to cases and accessories!
but really the neoprene case is just enough for me because i like the naked look and feel of the phone. plus the case was free!
Click to expand...
Click to collapse
Yeah I've seen those. I tried to get one from ebay and one went for 40 dollars. Screw it, i'll get the free one that comes with the phone. I just hope that offers enough protection. I will check out the cases and accessories. Thanks master =)
ChillRays said:
Yeah I've seen those. I tried to get one from ebay and one went for 40 dollars. Screw it, i'll get the free one that comes with the phone. I just hope that offers enough protection. I will check out the cases and accessories. Thanks master =)
Click to expand...
Click to collapse
no problem man. it definitely offers enough protection. but thats my personal use, i handle the thing like a new born so if thats any indication then ya. if you're gonna drop it... dont. haha
ChillRays said:
How long did you have the phone before it got to this point? Also were you careful with the phone or (trying to find the words) a little wreckless? Just curious..
Click to expand...
Click to collapse
I've had it since release. I ordered it about 30 minutes after the google.com/phone site was up and running. I am always careful with my devices, and use cases and protectors. My phone has never been dropped or mishandled. By way of example, I also got my G1 on release day, and when i got my nexus I was able to sell it on Ebay for $250 with a review about the immaculate condition of the phone he had received. He said it looked like it just came out of the original box.
I hold babies with less precision and attention.
Easy fix
I had the same problem but mine wouldn't scroll down. After getting the run-around on the phone from HTC, I tried to fix it myself. It took less than 10 seconds.
Just grab the ball using your finger nails or something similar, and twist the ball a little bit. it'll loosen up built up dirt and oil on the sensors, and viola! You should be able to scroll again. If not, then you need a replacement.
miketuesday said:
I had the same problem but mine wouldn't scroll down. After getting the run-around on the phone from HTC, I tried to fix it myself. It took less than 10 seconds.
Just grab the ball using your finger nails or something similar, and twist the ball a little bit. it'll loosen up built up dirt and oil on the sensors, and viola! You should be able to scroll again. If not, then you need a replacement.
Click to expand...
Click to collapse
You know, I would try this if the replacement hadn't been delivered to my doorstep like 5 minutes ago. Downside = I suppose I will need to run stock for a few weeks in case they refuse to accept the return because of the bootloader. Will make me appreciate devs all the more.
UPDATE: AAARRRGGGHHHHHHH!!!!! I AM RESTORING MY BEAUTIFUL PHONE TO STOCK STATE! OMFGPLSGODWHYISTHISHAPPENINGTOME! WILL BE RUNNING STOCK FOR A WEEK OR SO AFTER. HUGE CAN OF SUCK.
Update: okay, so this isn't that bad. Sigh.

I effed up, learn from my mistake...

Well, I'll be getting my $100 replacement tomorrow.
I'm usually very handy with electronics, I used to take my Blackberry's apart all the time and blow the dust out.
So I read up on disassembling the EVO and thought "this is gonna be a piece of cake". Well every set of instructions I found said it was SOO easy to take it apart, what they didn't say was they were assuming you have a replacement screen ready to go and that trying to remove the screen from the bezel separated the touch input from the backside of the glass.
Maybe I did it wrong but I broke my precious and almost cried.. a little.
I no longer have any touch input on the bottom half of the screen including the 4 buttons at the bottom. And you can see from the front how it looks like a clear sticker has been pulled apart from the glass. The LCD is fine, just totally jacked up the touch input.
So the purpose of this thread is to warn anyone else who may consider disassembling their EVO to read more than I did.
It may actually be very easy to get the thing apart, getting it back together is another story
Ouch man that sucks
From the fade
Condolences for the dear departed one. A point well taken, thanks!
Although I've "played" with dismantling many electronics during my days, this is one I would not take on. I even opted for the additional cost with BestBuy for their low price replacement for our 2 Evo's.
hmmm........
Aww man so sorry for you lost. That's great you've put up this post as I was just thinking about replacing my evo casing from all the cosmetic damage I've put on it while dropping. Thanks to you my friend this make my decision much easier.
I was going to do the same thing for the same purpose. Thanks for the heads up.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
Part the EVO out so that she may live on in someone else's phone.
BTW that quote is hilarious. I think I remember seeing that around somewhere.
lmao....smh
Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App
Reminds me when I took apart my g1 to change the housing, it was a mess of circuit boards, wires and ribbons.
Can anyone else share their similar experiences? I have a large amount of dust in the upper left in my week old evo, and would would like to clean it out.
Sent from my EVO
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
malibu_23 said:
lmao....smh
Click to expand...
Click to collapse
..what does "smh" mean?
tinybfk said:
Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
Damn, I didn't even think of looking. Actually my girl called Sprint and ordered the replacement the next morning without telling me.
It arrived this morning, its a refurb. The bezel is cracked and there's a bright spot on the screen. I called asurion right away, they shipped another already. Im keeping my fingers crossed that the next is in better condition.
Thanks for the link though!
if that was me a piece of me would have died
nebenezer said:
..what does "smh" mean?
Thanks for the link though!
Click to expand...
Click to collapse
http://www.internetslang.com/default.asp?s=smh
phatmanxxl said:
http://www.internetslang.com/default.asp?s=smh
Click to expand...
Click to collapse
lol.. yeah I've done quite a lot of that lately..
thanks for the link
nebenezer said:
lol.. yeah I've done quite a lot of that lately..
thanks for the link
Click to expand...
Click to collapse
No problem, MTFBWY
That sucks alot!!!
I did the same thing, wish I'd have read this post first! I had the dust in the upper left of my screen. I have taken this phone apart before, but not removed the glass. In attempting to remove the glass I messed up the upper right corner of the touch screen (just a small area but still sucks!) and now the tint of some colors is messed up. Also rashed up the plastic on the edges some. Oh and I did get the glass off just enough to spread the friggin dust all around haha. Oh well it's livable until June when I can get a full upgrade (hopefully the EVO 3D!). Let my post here serve as a SECOND warning for those who want to attempt to remove the dust themselves. The glass is glued down and you pretty much have to destroy the phone to remove it. Don't try it!!
dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
I ordered this same part and a new housing because I cracked my digitizer earlier this week. Thanks for the post, OP, because I plan on taking mine apart this weekend to replace it. Wish me luck! lol

replace lcd/digitizer

My screen is cracked to all hell. Is there a youtube video showing a strip down of the epic? Is there a guide on how to replace it? I have the lcd and ditizer,so I'm all set except for the actual replacement. LOL
Tia
would you mind sharing the source for the screen/digitizer for those that haven't broken their screens yet ?
Just curious.
I do not know how to tear it down yet though.
Thanks for sharing.
I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?
igotsthemagicinme said:
I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?
Click to expand...
Click to collapse
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))
There is not much for the Epic but some info for the original Galaxy S
http://forum.xda-developers.com/showthread.php?t=745262
Dissemble of Galaxy S:
http://www.careace.net/2010/06/09/disassembly-of-the-samsung-galaxy-s/
and there are some tear-down pics of the Epic
Thats prob all info there is :/
APOLAUF said:
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))
Click to expand...
Click to collapse
yea i was just saying "lcd" i got the right one i know
taking a look at the links below
ok well by the looks of it, its pretty much the same thing. i talked to a tech at a repair center, and he said he MIGHT be able to do it. if not, i think i probably have about 70% chance of getting it right. the video showed a break down right down to the digitizer, and it looks almost EXACTLY like that i have, so in theory, i should just have to go as far as gettting the back off, and putting the back BACK on the NEW digitizer/amoleisupmyassed, right?
also, just for clarification, i know i have the right one bcuz i can see the button whole thingies and its the same as what the epic has (menu, home, back, search)
thanks for the useful links& help guys
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
Did they charge anything?
lehaman310 said:
Did they charge anything?
Click to expand...
Click to collapse
Nooooope
Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.
Chabsin said:
Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.
Click to expand...
Click to collapse
How is it out of warranty when it hasn't even been out for a year? or did you mod it or something?
igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
just curious...so sprint installed the screen you purchased or they installed one of their own? I had to do this on an htc phone a while back and it was much easier than I imagined.
Sent from my SPH-D700 using Tapatalk
I purchased a bad esn phone off ebay. I run it on a different network. You think a Sprint store would do something for me?!
Demianwulf said:
I had to do this on an htc phone a while back and it was much easier than I imagined.
Click to expand...
Click to collapse
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?
Chabsin said:
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?
Click to expand...
Click to collapse
If your seriously considering using glue...crazy glue is the way to go >.> (pun intended)
I still don't understand, why are you out of warranty? samsung offers a 1 year warranty...
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App
Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
No even though Sprint has it in their system as marked "bad esn" samsung will not have to do with this. Although I don't think Samsungs warranty covers accidents, such as dropping your phone and cracking the screen.
Hope you get it figured out!
Sincerely,
D3luSi0n4L
Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Click to expand...
Click to collapse
Well Samsung has their own warranty thing...but I would confirm by contacting Samsung..don't tell them you swapped networks or anything of course..otherwise I don't think they would bother to check...
You can always flash it back too..unless phone doesnt work completely?
I got the whole screen + keyboard for under $60 on ebay. It turned out to be as simple as unscrewing and unsnapping the cover, disconnecting three connectors, removing the electronics and putting them in to the new frame. If I'd have to do it again it wouldn't take more than 15 minutes.
Sent from my SPH-D700 using XDA App

[Q] Replacing the Surround's Screen?

I managed to scratch my HTC Surround's screen when I dropped it the other day. It's a fairly large scratch and it's bothering me enough that I'm looking to get it fixed. I've seen some auctions on eBay for the HTC Surround's digitizer but have no idea how I would go about removing the screen to replace the digitizer. ifixit's guide doesn't seem to show how either. Am I better off just seeing if HTC can repair it? How much do you think it'd cost?
I owned a Tilt for a very long time, so long, that I replaced almost every part of the phone. This was a difficult and time consuming process. I would definitely find out what it would cost to have it done professionally and compare that to what the digitizer plus tools to disassemble your phone would cost. Not to mention any warranty you might no longer have, labor, possible damage...etc.
As far as I'm concerned, having a legit reason to take apart my phone is right up my alley, so it's all up to you. Either way, let us know how it works out and I wish you the best of luck.
PS, pics will be awesome if you do!
HTC gave me an estimate of about $120. However, the person on the line said it may end up being more and if I decide to not go through with the repairs, it'll be $39 to get it back. So I did some Googling and found Mission:Repair. Apparently they offer Glass/Digitizer screen repair for just $99. They have some good reviews on Yelp but it's mostly for iPhone's, iPods, and MacBooks. I think I'll give them a shot and post a review on them later.
That sounds decent and worth not having the hassle. Definitely keep us updated and I wish you luck!
How much was the digitizer + Shipping and whatnot
youtube.com/watch?v=TFmQigK6u1w
valajax said:
youtube.com/watch?v=TFmQigK6u1w
Click to expand...
Click to collapse
Now this video would be a high five if it showed how to get to the screen but it does nothing but give you a video representation of the ifixit.com's walk through that only goes that far.
I myself bought the new digitizer and it came with the tools and all....I couldn't figure out how to get to the screen. I ripped the thing into pieces but couldn't get the screen section to budge.
Edit:
I wound up taking it to a local shop. I could barely tell what they were doing. I couldn't see how they got the two halves apart but the screen itself is well glued into place. The final review by the guy was "it was a pain in the ass". :/
I did it
I did it and i uploaded a home-made video. Look at the Surround General Forum.
forum.xda-developers.com/showthread.php?t=1217885
a little wrong will make your surround a brick
****angke said:
a little wrong will make your surround a brick
Click to expand...
Click to collapse
yes, You must be very careful... do it at your own risk

Categories

Resources