Database Users

Pissed as hell :-( :-( :-(

A horrible thing just happened today...my god damned friend dropped my universal down from 3 feet height...nothing really has happened, but the edges are bruised...a little paint chipped off at a couple places....small deformations in the contours :-(
he says....."duh....sorry"
i'm all freaked out here :-(
now.... the question
is the body/ outer shell of the universal replacable?
if yes, how much does it cost and where can I order it from?
arghhh :-(
thanks,
San
PS: if you don't have an answer, or nothing to say at all, atleast sympathize for me!!

Presumably, you mean "ex-friend" ;-)
Cheers,
Steve

StevePritchard said:
Presumably, you mean "ex-friend" ;-)
Cheers,
Steve
Click to expand...
Click to collapse
food for thought indeed!!!
cheers,
San

dreamtheatre39, I am so sorry. I know you waited so long for your Qtek. I suggest you friend should start saving now for your birthday - perhaps a replacement?

I too am very careful with my EXEC. I want it to last forever or at least till its next Pocket PC phone upgrade. I would really hate it if my EXEC would get any scratch or defect due to handling, especially if it is not my fault. So I do understand your frustration.

StevePritchard said:
Presumably, you mean "ex-friend" ;-)
Click to expand...
Click to collapse
Would have had to carry him out in a pine box, if it had been mine!

pine? cardboard at a push :wink:
send it back under the insurance for the device?

thanks everyone!
I guess only people who own a universal will know how valuable it is....I am over obsessed with my gadget, and have constantly been "over protective" since i've got it! I keep a "wipe" sandwiched in the clam shell al the time to prevent scratches on the keyboard and display.....I keep wiping off the dirt at 5 minute intervals thru the day!
and in the name of satan why o why is it meeee to suffer this wretched wrath :-(
Can anyone tell me if its possible to change the outer casing? Is it complicated and too difficult to do so?
Thank you all once again!
San

I think only contact with HTC or where you bought Universal to see what they can do , my PDA2K got replace by HTC.

Hi!!!
Sad to know...but I can tell u the goodthing that IT IS POSSIBLE to have a new body..Entire casing can be changed..so do not worry.As of now the stocks are not there as it is just launched officially in India...In case I get a dead one with a Good Body, will let u know...I am based in Pune....

I can relate dreamtheater.... I dont think I can trust any friend with my device without constant guidance. Even my husband has to be under my eye when he's tinkering with my dopod.
Is it still under warranty? Then maybe it can be replaced... or maybe you can always give subtle or not so subtle hints to your friend (if he is really a friend) to replace it...
Good luck

hey!
hee hee I wish i could give those *subtle* hints lol
It really is not so bad, frankly speaking....but, the freak that I am....makes me soooo damn fussy about things, and i keep looking at those tiny abrasions all the time....and cant get it off my phucking head :x
I'll just have to wait until I screw it up a little more, and by that time....I'd possibly get an outer casing so that I could slip it in some new clothes!
Until then.....
cheers and have a great new year guys (n angelika!)!
San

Hey DT,
That really sucks mate.
Your friend should really take responsibility for this, but i know its not the money. I know you would pay good money to have your universal back in good shape this instant...
I could have helped you if you had a Jasjar since i-mate is based in Dubai, but since you got yourself a qtek, there really isn't anything i can do. However, i do advise you talk to MMB about this as he might be able to arrange for a body from his supplier. No harm in trying!
Dont worry, it will be fine. Also, get yourself a good case like the ones from Piel Frama or a metal case from Brando
Cheers.

Gutted for you m8. Know exactly how you must feel. Been treating my new Wizard like a new born baby since christmas day and wont let anyone touch it. The wife asked to have a look at it and I just told her it was too much phone for her to handle
Im totally anal when I get a new phone and am constantly looking at it thinking it that a scratch. Im thinking of making the whole family shave their heads as head hairs dont half look like scratches from a distance.... Pubic hairs are far easier to spot though :wink:
Hope you sort yourself out m8.

universaldoc said:
Hey DT,
That really sucks mate.
Your friend should really take responsibility for this, but i know its not the money. I know you would pay good money to have your universal back in good shape this instant...
I could have helped you if you had a Jasjar since i-mate is based in Dubai, but since you got yourself a qtek, there really isn't anything i can do. However, i do advise you talk to MMB about this as he might be able to arrange for a body from his supplier. No harm in trying!
Dont worry, it will be fine. Also, get yourself a good case like the ones from Piel Frama or a metal case from Brando
Cheers.
Click to expand...
Click to collapse
@doc
hey m8! how've you been? ;-)
I wonder why I didn't think of asking mmb....I'm sending david a mail right away! He gave me excellent service while I bought it from him, hope hed do his magic once again ;-)
I spent the whole of today trying to find a case for my universal...I looked around for camera cases, waist pouches, n-gage cases.....all of them are either tooo small, or hideously bigg! Gave up....I guess its only piel frama for now :-(
got to keep humans away from my qtek until then
knowsleyroader said:
it was too much phone for her to handle
Click to expand...
Click to collapse
lol are u still allowed to stay at home?
cheers,
San

Yes but apparently only because she feels sorry for me that I wouldnt be able to charge my Wizard living on the streets
I always liked the couch anyway :wink:

my baby
I am appalled how easy it is to get the Jasjar scratched, the metal also gets dents so easily. I need to find out the cost of a new cover, I don’t like my baby with imperfections 

Three feet? That's like... 3 stories in human-height scale!
Hey, at least your screen didn't crack like http://forum.xda-developers.com/viewtopic.php?t=36932 jesax's... poor guy.

heidy said:
Three feet? That's like... 3 stories in human-height scale!
Hey, at least your screen didn't crack like http://forum.xda-developers.com/viewtopic.php?t=36932 jesax's... poor guy.
Click to expand...
Click to collapse
3 feet indeed :-( it fell right off the table...
lucky for me, I had the cover protecting it....the one that comes with the device....I guess that took most of the impact!
If my screen had cracked....holy hell :O I don't quite know what I would have done!! I couldn't force my friend to buy me a new one, cuz....I would have killed him immediately
anyways, I've decided that i'd live with the scratches :-( considering the fact that it would take me another month and *all* the complications all over & again for me to source it! Now i'm ten times more careful....a little late though :-(
Best,
San

Hi dt,
Doing good mate, thanks.
Just be happy that the incident occurred on the 31st of last year and not the 1st of this year. Otherwise, that would have been a nasty way of starting a new year!
Any response from MMB?
Chin up mate!

Trackball Screwy

Yesterday afternoon the trackball on my N1 stopped working. it'll scroll everywhere but left. Nothing obviously wrong with it, just wont go. thought i'd give it a minute, push and play with it, see if something gives, but no dice. This morning I called HTC, no questions about bootloader which should not affect a hardware issue anyway. Having a replacement sent today.
Now I'll send this phone back, and they will assumably examine and test it. I would agree with any non-hardware issues being rejected due to unlocked bootloader, however if they contact me and say they will not cover the trackball because of this, I will bite the bullet and pay for the repair or replacement, and won't even be pissy about it. I'm just curious what HTC will do, being as this is obviously a hardware issue which unlocking cannot affect.

Seems 50/50 whether they will cover it or not really.

i had a h/w issue and an unlocked bootloader and they still charged me $55 for a replacement
good luck

As of yesterday my trackball has started being annoying, has trouble scrolling downwards, though is not completely broken. I am reluctant to do an exchange, because mine is a special import and has an unlocked bootloader.
Do you have the number for US HTC anyway?

Daswolven said:
Yesterday afternoon the trackball on my N1 stopped working. it'll scroll everywhere but left. Nothing obviously wrong with it, just wont go. thought i'd give it a minute, push and play with it, see if something gives, but no dice. This morning I called HTC, no questions about bootloader which should not affect a hardware issue anyway. Having a replacement sent today.
Now I'll send this phone back, and they will assumably examine and test it. I would agree with any non-hardware issues being rejected due to unlocked bootloader, however if they contact me and say they will not cover the trackball because of this, I will bite the bullet and pay for the repair or replacement, and won't even be pissy about it. I'm just curious what HTC will do, being as this is obviously a hardware issue which unlocking cannot affect.
Click to expand...
Click to collapse
How long did you have the phone before it got to this point? Also were you careful with the phone or (trying to find the words) a little wreckless? Just curious..

liam.lah said:
As of yesterday my trackball has started being annoying, has trouble scrolling downwards, though is not completely broken. I am reluctant to do an exchange, because mine is a special import and has an unlocked bootloader.
Do you have the number for US HTC anyway?
Click to expand...
Click to collapse
1-888-216-4736
Nexus One specific hotline. They're nice people.

ChillRays said:
How long did you have the phone before it got to this point? Also were you careful with the phone or (trying to find the words) a little wreckless? Just curious..
Click to expand...
Click to collapse
you must be an HTC insider...
this shouldn't matter it's covered for a year, no matter how he uses the trackball

zachthemaster said:
you must be an HTC insider...
this shouldn't matter it's covered for a year, no matter how he uses the trackball
Click to expand...
Click to collapse
no just curious because I myself am looking into buying this phone. I don't want to repeat someone else's mistakes (if there are any mistakes at all). Not related to this but i've heard plenty of times where someone has said "if I was a little more careful, this wouldn't have happend". I'm trying to find a bunch of those situations so I don't fall for them. Thats it..

ChillRays said:
no just curious because I myself am looking into buying this phone. I don't want to repeat someone else's mistakes (if there are any mistakes at all). Not related to this but i've heard plenty of times where someone has said "if I was a little more careful, this wouldn't have happend". I'm trying to find a bunch of those situations so I don't fall for them. Thats it..
Click to expand...
Click to collapse
oh well im a hard user of the trackball and its fine. what other things do you wanna know? ive had three of these so im a pro haha

Thanks for the number.
I can't help but wonder if me using "trackball wakeup" has contributed to this, I hope not, because it is damn handy to use.

liam.lah said:
Thanks for the number.
I can't help but wonder if me using "trackball wakeup" has contributed to this, I hope not, because it is damn handy to use.
Click to expand...
Click to collapse
i have that as well on cyanogen 506. honestly it should be fine.
if it sticks, clean the ball with a very miniscule amount of alcohol, it'll break the dirt down and youll be good to go. or just dont think about it everytime you touch it (i used to be that way and now im better off. ha)
oh and a friendly tip.
EVERYTIME you're done using the TB, WIPE IT ON YOUR SHIRT or something cloth. thats the best way to clean it. up and down on your shirt. side to side even too

zachthemaster said:
oh well im a hard user of the trackball and its fine. what other things do you wanna know? ive had three of these so im a pro haha
Click to expand...
Click to collapse
Needless to say I think i've heard every problem you could possibly have with this phone happen. From the screen cracking from a 1 foot drop to the camera app not working, to this post. However, I'm going with the n1 anyway. I'm sure that for every bad nexus one, theres 1,999 good ones. Anyway the only thing I need help with is finding a good case that will prevent damage because I have been known for dropping my phone alot.
My friends have told me to go with the "seidio innocase II" and others have said get a crystal silicone case. What do you recommend?

ChillRays said:
Needless to say I think i've heard every problem you could possibly have with this phone happen. From the screen cracking from a 1 foot drop to the camera app not working, to this post. However, I'm going with the n1 anyway. I'm sure that for every bad nexus one, theres 1,999 good ones. Anyway the only thing I need help with is finding a good case that will prevent damage because I have been known for dropping my phone alot.
My friends have told me to go with the "seidio innocase II" and others have said get a crystal silicone case. What do you recommend?
Click to expand...
Click to collapse
i just use the included neoprene case and a lot of careful handling. why dont you waltz over to cases and accessories!
but really the neoprene case is just enough for me because i like the naked look and feel of the phone. plus the case was free!

zachthemaster said:
i just use the included neoprene case and a lot of careful handling. why dont you waltz over to cases and accessories!
but really the neoprene case is just enough for me because i like the naked look and feel of the phone. plus the case was free!
Click to expand...
Click to collapse
Yeah I've seen those. I tried to get one from ebay and one went for 40 dollars. Screw it, i'll get the free one that comes with the phone. I just hope that offers enough protection. I will check out the cases and accessories. Thanks master =)

ChillRays said:
Yeah I've seen those. I tried to get one from ebay and one went for 40 dollars. Screw it, i'll get the free one that comes with the phone. I just hope that offers enough protection. I will check out the cases and accessories. Thanks master =)
Click to expand...
Click to collapse
no problem man. it definitely offers enough protection. but thats my personal use, i handle the thing like a new born so if thats any indication then ya. if you're gonna drop it... dont. haha

ChillRays said:
How long did you have the phone before it got to this point? Also were you careful with the phone or (trying to find the words) a little wreckless? Just curious..
Click to expand...
Click to collapse
I've had it since release. I ordered it about 30 minutes after the google.com/phone site was up and running. I am always careful with my devices, and use cases and protectors. My phone has never been dropped or mishandled. By way of example, I also got my G1 on release day, and when i got my nexus I was able to sell it on Ebay for $250 with a review about the immaculate condition of the phone he had received. He said it looked like it just came out of the original box.
I hold babies with less precision and attention.

Easy fix
I had the same problem but mine wouldn't scroll down. After getting the run-around on the phone from HTC, I tried to fix it myself. It took less than 10 seconds.
Just grab the ball using your finger nails or something similar, and twist the ball a little bit. it'll loosen up built up dirt and oil on the sensors, and viola! You should be able to scroll again. If not, then you need a replacement.

miketuesday said:
I had the same problem but mine wouldn't scroll down. After getting the run-around on the phone from HTC, I tried to fix it myself. It took less than 10 seconds.
Just grab the ball using your finger nails or something similar, and twist the ball a little bit. it'll loosen up built up dirt and oil on the sensors, and viola! You should be able to scroll again. If not, then you need a replacement.
Click to expand...
Click to collapse
You know, I would try this if the replacement hadn't been delivered to my doorstep like 5 minutes ago. Downside = I suppose I will need to run stock for a few weeks in case they refuse to accept the return because of the bootloader. Will make me appreciate devs all the more.
UPDATE: AAARRRGGGHHHHHHH!!!!! I AM RESTORING MY BEAUTIFUL PHONE TO STOCK STATE! OMFGPLSGODWHYISTHISHAPPENINGTOME! WILL BE RUNNING STOCK FOR A WEEK OR SO AFTER. HUGE CAN OF SUCK.
Update: okay, so this isn't that bad. Sigh.

I effed up, learn from my mistake...

Well, I'll be getting my $100 replacement tomorrow.
I'm usually very handy with electronics, I used to take my Blackberry's apart all the time and blow the dust out.
So I read up on disassembling the EVO and thought "this is gonna be a piece of cake". Well every set of instructions I found said it was SOO easy to take it apart, what they didn't say was they were assuming you have a replacement screen ready to go and that trying to remove the screen from the bezel separated the touch input from the backside of the glass.
Maybe I did it wrong but I broke my precious and almost cried.. a little.
I no longer have any touch input on the bottom half of the screen including the 4 buttons at the bottom. And you can see from the front how it looks like a clear sticker has been pulled apart from the glass. The LCD is fine, just totally jacked up the touch input.
So the purpose of this thread is to warn anyone else who may consider disassembling their EVO to read more than I did.
It may actually be very easy to get the thing apart, getting it back together is another story

Ouch man that sucks
From the fade

Condolences for the dear departed one. A point well taken, thanks!
Although I've "played" with dismantling many electronics during my days, this is one I would not take on. I even opted for the additional cost with BestBuy for their low price replacement for our 2 Evo's.

hmmm........

Aww man so sorry for you lost. That's great you've put up this post as I was just thinking about replacing my evo casing from all the cosmetic damage I've put on it while dropping. Thanks to you my friend this make my decision much easier.

I was going to do the same thing for the same purpose. Thanks for the heads up.
Sent From My HTC Evo 4G Using Tapa Talk Pro!

Part the EVO out so that she may live on in someone else's phone.
BTW that quote is hilarious. I think I remember seeing that around somewhere.

lmao....smh

Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App

Reminds me when I took apart my g1 to change the housing, it was a mess of circuit boards, wires and ribbons.

Can anyone else share their similar experiences? I have a large amount of dust in the upper left in my week old evo, and would would like to clean it out.
Sent from my EVO

Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43

malibu_23 said:
lmao....smh
Click to expand...
Click to collapse
..what does "smh" mean?
tinybfk said:
Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
Damn, I didn't even think of looking. Actually my girl called Sprint and ordered the replacement the next morning without telling me.
It arrived this morning, its a refurb. The bezel is cracked and there's a bright spot on the screen. I called asurion right away, they shipped another already. Im keeping my fingers crossed that the next is in better condition.
Thanks for the link though!

if that was me a piece of me would have died

nebenezer said:
..what does "smh" mean?
Thanks for the link though!
Click to expand...
Click to collapse
http://www.internetslang.com/default.asp?s=smh

phatmanxxl said:
http://www.internetslang.com/default.asp?s=smh
Click to expand...
Click to collapse
lol.. yeah I've done quite a lot of that lately..
thanks for the link

nebenezer said:
lol.. yeah I've done quite a lot of that lately..
thanks for the link
Click to expand...
Click to collapse
No problem, MTFBWY

That sucks alot!!!

I did the same thing, wish I'd have read this post first! I had the dust in the upper left of my screen. I have taken this phone apart before, but not removed the glass. In attempting to remove the glass I messed up the upper right corner of the touch screen (just a small area but still sucks!) and now the tint of some colors is messed up. Also rashed up the plastic on the edges some. Oh and I did get the glass off just enough to spread the friggin dust all around haha. Oh well it's livable until June when I can get a full upgrade (hopefully the EVO 3D!). Let my post here serve as a SECOND warning for those who want to attempt to remove the dust themselves. The glass is glued down and you pretty much have to destroy the phone to remove it. Don't try it!!

dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
I ordered this same part and a new housing because I cracked my digitizer earlier this week. Thanks for the post, OP, because I plan on taking mine apart this weekend to replace it. Wish me luck! lol

OEM HTC Evo 4G Middle Plate

I've been working on repairing my own Evo, and ran into an issue where the middleplate I bought from China did not come with the wiring tape / Antenna... so I bought one of these.. BUT I had to buy two. Anyone need one? It is on the way, but I won't have a need for two middleplates... PM me and we can work something out. $15 bucks.
This is who I used:
http://www.globaldirectparts.com/Sprint-HTC-Evo-4G-Middle-Plate-p/htc736740.htm
They seem to have everything I have needed in the past, wish I would have ponied up the extra dough and got my parts from them in the first place... Live and learn.

I hope someone sells an aftermarket middleplate like this for the 3D, I hate the inside of the new Evo, it's not red!

How would I go about removing my old one to put this one on?

knowledge561 said:
How would I go about removing my old one to put this one on?
Click to expand...
Click to collapse
You can get the tools from Ebay for a couple of bucks. I've never done anything like this and so far so good. I've seen people substitute a guitar pick for the "safe pry tool" but I splurged.
There are many videos on doing this, hence where I got the ol idea, and it really isn't too hard, I just couldn't transfer the antenna from the old middle plate to the new one.

Samzebian said:
I hope someone sells an aftermarket middleplate like this for the 3D, I hate the inside of the new Evo, it's not red!
Click to expand...
Click to collapse
with a custom backplate with the hole in it for the custom middle plate that has a kickstand....

just an fyi, the black sands off pretty easily and if you have someone good at applying nail polish you can make this a custom color. my evo has red trim now to match the camera/kickstand backing

kellybrf said:
just an fyi, the black sands off pretty easily and if you have someone good at applying nail polish you can make this a custom color. my evo has red trim now to match the camera/kickstand backing
Click to expand...
Click to collapse
I'd like to see a picture of that... sounds pretty slick. I've seen some versions of the bumblebee Evo, not too bad.

only from the side, but you get the idea. my friend did the bumblebee and im not a fan. the red is much more natural. the thing is that the whole piece is actually red, htc painted the sides black

monkeybone12 said:
I've been working on repairing my own Evo, and ran into an issue where the middleplate I bought from China did not come with the wiring tape / Antenna... so I bought one of these.. BUT I had to buy two. Anyone need one? It is on the way, but I won't have a need for two middleplates... PM me and we can work something out. $15 bucks.
This is who I used:
http://www.globaldirectparts.com/Sprint-HTC-Evo-4G-Middle-Plate-p/htc736740.htm
They seem to have everything I have needed in the past, wish I would have ponied up the extra dough and got my parts from them in the first place... Live and learn.
Click to expand...
Click to collapse
the link isn't working.

HD2 for $70?

Guy has a HD2 with the MIUI ROM and says the SD card slot isn't working and the screen is sometimes unresponsive. I figured probably just wipe it all and start over until he told me he recently took it apart and decided it was too complicated for him to deal with so he slapped it all back together. He seems to know what he's talking about quite a bit. Is it even worth me getting it for $70 or is this a joke. What do you guys think?

HD2 screens tend to get unresponsive after a while of use. It seems some connectors of the digitizer run underneath the Red Dial hardware button. Eventually though, all HD2 screens will die. The digitzer can be replaced, but it is quite difficult to do apparantly. Also, digitizers are like 70$. So no, I do not recommend you buying that phone. You would only have to spend more money to get it fixed (that is, if you could even fix it).

Agreed. Too troublesome to replace the digitizer. Will end up running you as much as if you bought a fully functioning used HD2.

anseio said:
Agreed. Too troublesome to replace the digitizer. Will end up running you as much as if you bought a fully functioning used HD2.
Click to expand...
Click to collapse
I agree, only if you're not a techy skilled guy!

Thanks guys! I was willing to take it on but not after he pulled it apart. I've repaired a few phones before but one thing I hate is if it's previously been tinkered with. That's just a no no. You all are right, that $70 could nearly double and at that point I would have been better off getting another one. I really appreciate it.

quickbird144 said:
Thanks guys! I was willing to take it on but not after he pulled it apart. I've repaired a few phones before but one thing I hate is if it's previously been tinkered with. That's just a no no. You all are right, that $70 could nearly double and at that point I would have been better off getting another one. I really appreciate it.
Click to expand...
Click to collapse
And the digitizer on the HD2 is particular awful to change out. One of the main versions of it require heating it in an oven and prying it apart. Not exactly what I'm willing to do, in any case, unless the phone and parts are free.

hd2 70$ !!
sent u a pm !! !

I'd be willing to pay $70 for the working mainboard.

enigma1nz said:
I'd be willing to pay $70 for the working mainboard.
Click to expand...
Click to collapse
he doesnt want to sell it !!
i pm'ed him and he told me so !! !!
mods pls close this thread ! !!

think you have to bake the phone in an oven to melt the glue to change the screen

no owen, lol. it's quite easy to do, at least it was on my diamond, who has the same assembly. a little hair drier is just what the doctor ordered...

change the screen take tons of works!

Yeah I ended up passing on it guys. I didn't have the phone in possession, was just getting advice while I was thinking of purchasing it. From what I understand, it's quite a bit of work replacing that screen, but a simple hair dryer like rape_artist stated would work, or a heat gun.