OEM HTC Evo 4G Middle Plate - EVO 4G General

I've been working on repairing my own Evo, and ran into an issue where the middleplate I bought from China did not come with the wiring tape / Antenna... so I bought one of these.. BUT I had to buy two. Anyone need one? It is on the way, but I won't have a need for two middleplates... PM me and we can work something out. $15 bucks.
This is who I used:
http://www.globaldirectparts.com/Sprint-HTC-Evo-4G-Middle-Plate-p/htc736740.htm
They seem to have everything I have needed in the past, wish I would have ponied up the extra dough and got my parts from them in the first place... Live and learn.

I hope someone sells an aftermarket middleplate like this for the 3D, I hate the inside of the new Evo, it's not red!

How would I go about removing my old one to put this one on?

knowledge561 said:
How would I go about removing my old one to put this one on?
Click to expand...
Click to collapse
You can get the tools from Ebay for a couple of bucks. I've never done anything like this and so far so good. I've seen people substitute a guitar pick for the "safe pry tool" but I splurged.
There are many videos on doing this, hence where I got the ol idea, and it really isn't too hard, I just couldn't transfer the antenna from the old middle plate to the new one.

Samzebian said:
I hope someone sells an aftermarket middleplate like this for the 3D, I hate the inside of the new Evo, it's not red!
Click to expand...
Click to collapse
with a custom backplate with the hole in it for the custom middle plate that has a kickstand....

just an fyi, the black sands off pretty easily and if you have someone good at applying nail polish you can make this a custom color. my evo has red trim now to match the camera/kickstand backing

kellybrf said:
just an fyi, the black sands off pretty easily and if you have someone good at applying nail polish you can make this a custom color. my evo has red trim now to match the camera/kickstand backing
Click to expand...
Click to collapse
I'd like to see a picture of that... sounds pretty slick. I've seen some versions of the bumblebee Evo, not too bad.

only from the side, but you get the idea. my friend did the bumblebee and im not a fan. the red is much more natural. the thing is that the whole piece is actually red, htc painted the sides black

monkeybone12 said:
I've been working on repairing my own Evo, and ran into an issue where the middleplate I bought from China did not come with the wiring tape / Antenna... so I bought one of these.. BUT I had to buy two. Anyone need one? It is on the way, but I won't have a need for two middleplates... PM me and we can work something out. $15 bucks.
This is who I used:
http://www.globaldirectparts.com/Sprint-HTC-Evo-4G-Middle-Plate-p/htc736740.htm
They seem to have everything I have needed in the past, wish I would have ponied up the extra dough and got my parts from them in the first place... Live and learn.
Click to expand...
Click to collapse
the link isn't working.

Related

wing for sale**cheap

kinda sick of my wing and its kinda beat up i mean nothing wrong with it except for lots of scratches on the case and stuff :-/
screens perfect and phone works fine
willing to let it go for $150
i think thats real cheap maybe someone needs a extra wing to mess around with or w.e :-/
just let me know
[email protected]
email me
alex
donate it to the "chefs" for testing roms and cooking for the community....
just kidding..
fortuni said:
kinda sick of my wing and its kinda beat up i mean nothing wrong with it except for lots of scratches on the case and stuff :-/
screens perfect and phone works fine
willing to let it go for $150
i think thats real cheap maybe someone needs a extra wing to mess around with or w.e :-/
just let me know
[email protected]
email me
alex
Click to expand...
Click to collapse
can you post a couple of pictures of how scratched up it is? I may be interested in it.
obviously i have ADD lol
as you can see from the pics >.<
but other than cosmetically the phone is fine
fortuni said:
obviously i have ADD lol
as you can see from the pics >.<
but other than cosmetically the phone is fine
Click to expand...
Click to collapse
That is pretty dinged up. One can always buy a housing though. But the ones I have seen are pretty expensive.
Maybe somebody could get this and a housing and make a How To change housing?
yea she aint pretty but im thinking someone who needs a back up phone for testing roms and such
Wow, I thought mine was in bad shape when someone said "I didn't know those came in black..." "They don't. It's frying grease that's soaked in."
hahaha. I thought I was bad with my phone. I got pissed because I got a little scratch on the screen!
If someone does have info on changing the housing, I might be interested in picking it up. I was gonna buy it to give to my dad so he'd get off his stupid Palm Treo 680 ... but if its all banged up, I would just have to keep it to experiment with then.
Well I'm a cook at one of my jobs and I'd rather keep my wing in my pocket than in my coat or car where it could get nabbed. I guess it's the lesser of the two evils. My screen is flawless though, thank you jerito... I mean screen protectors!
simplicity05 said:
Well I'm a cook at one of my jobs and I'd rather keep my wing in my pocket than in my coat or car where it could get nabbed. I guess it's the lesser of the two evils. My screen is flawless though, thank you jerito... I mean screen protectors!
Click to expand...
Click to collapse
I bought some screen protectors, but I hate them. It just doesnt look or feel right to me. I only have a small scratch on the screen too and that was because my brother threw his keys on it when it was laying in my car. I almost killed him
David-
http://cgi.ebay.com/New-Original-OE...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
You may be able to contact this seller to see if he has any instructions.
$150 for that? I'll give you $40.
Amazon was selling them new with contract for $50 - and you can pick up a tilt for only $400...
thank you vr24 for contributing to this thread with your amazing comment
-- no blaming--- edit by papamopps
Man it look like you been chewing on that phone... Either that or trying to skin concrete with it.
yeah, its pretty beat up.
How bout I recycle that thing for you for free? How many times did it go through the wood chipper?

			
				
Just outta curiosity...
Are you at least offering up a 1GB MicroSD card with the Wing?
yea theres a 1gb microSD included
bumpskies?
duprade said:
hahaha. I thought I was bad with my phone. I got pissed because I got a little scratch on the screen!
If someone does have info on changing the housing, I might be interested in picking it up. I was gonna buy it to give to my dad so he'd get off his stupid Palm Treo 680 ... but if its all banged up, I would just have to keep it to experiment with then.
Click to expand...
Click to collapse
chang the housing is very easy, torks t6 and a very small Phillips and an ipod pry tool but you can always get a nice cover from ebay gray silver black
just goolge herald service manual the one i used was from mick cannon download service manuals

Spares for the Athena, anywhere?

Can anyone lead me to where to find a spare enclosure (not an external case).
The one that holds the whole thing together. Ok I need some help here to find the right term
My Athena fallen and I now got a bent Athena. An art piece I'm sure, but rather have it back to its shape, you know?!
So does anyone know where to find spares?
why dont you take a picture so we could see what exactly you need
Will need to find a mirror as it is the only camera I have
Anyhow I just find what it is. Is the SHELL. The black aluminum shell.
Is anywhere to be found it as a spare?
Thank you
Look in this thread: http://forum.xda-developers.com/showthread.php?t=356828
silviu.h said:
Look in this thread: http://forum.xda-developers.com/showthread.php?t=356828
Click to expand...
Click to collapse
Thank you.
I ordered the spare casing. Will post how it goes....
Sorted!!
I have received the casing, followed instructions and I now have a bright new Athena
The only bad thing is that the camera button and the volume sliders are missing from the replacing casing. and the camera button is a nightmare to take it over from the old one.
If anyone needs assistance with replacing the casing, just PM and I'll do my best to help.
So which did you get in the end, the brando one?
I'm contemplating doing mine at some point, it's pretty scarred.
I did go for the brando and it took about a week to receive it in Scotland.
The instructions are quite easy to follow, but the tools are a must, specially the flat tool to push the parts open. I got mine here when I repaired my powerMAC a few weeks ago.
does someone know where to get a new digitizer? my one is broken (the LCD itself is still fine) and I ordered this one. But they refunded me my money and said they are out of stock
Any suggestions?
Try the brando website.
It looks like they have a lot of spare parts...
If you can't find it, try to contact them, I got a few parts not listed this way.
Good luck
nForce
does someone know where to get a new digitizer? my one is broken
Click to expand...
Click to collapse
You can try here
http://www.gpsmidlands.co.uk/index.php?category=Pda Digitisers
but this is £90 of her majesty money
the one in your ebay link for £19 is unbelievable, are they for real?
Regards
they said they are out of stock but they promised to contact me if they get some "digitizer-only"
currently they only have full LCD screens for £150
as far as I can see the dealer seems to be realiable...

Need to find replacement ear pc. receiver. Help Please.

I work in a machine shop and there are a lot of very fine steel chips everywhere. When I put my phone in my pocket all of the fine chips get sucked into the phone from the external speaker magnet and the ear pc receiver magnet. The same thing was happening to me when I had a NexTel phone that had a much more powerful external speaker so, it was kind of understandable. But, at any rate I took the phone completely apart and cleaned the external speaker and that sounds fine now. I also cleaned the ear pc speaker but, I think some steel chips are too far in because the speaker still sounds like **** or it blew from having the chips on it too long. I would rather just replace the speaker myself instead of getting a re-furbished replacement from t-mobile. I looked all over but can't find a replacement ear pc. at all. It would be really cool if anybody know a place to get these type of pcs. Thanks in advance.
Come on guys. You mean to tell me that nobody on this forum knows where to get replacement parts. I find that hard to believe.
Thanks for the help. Lol
Mike,
If nobody has replied, then I guarantee you that nobody who has read your question knows where to find that part.
Now, there are a number of places that sell some types of replacement parts for the HD2...things like digitizers/screens, outer shells, buttons, etc, but I've never seen an item like the speaker you need sold through any distributor. That's the kind of part that rarely finds it's way into normal distribution channels, and so your best bet is to find a junked HD2 that doesn't work for some other reason, but has no problem with the earpiece, and then it would just be up to you to extract the component you need and pop it into your unit.
You can just do a regular google search for "HD2 replacement parts" to find the standard outlets for that type of thing, but I honestly doubt any of them will have exactly what you're looking for.
a few weeks ago I remember seeing a bricked hd2 for sale on ebay for parts. perhaps you can check ebay.
Sent from Samsung Vibrant using XDA App
UncleMike1 said:
Thanks for the help. Lol
Click to expand...
Click to collapse
whoa, slow down UncleMike. At least 48 before getting excited. Im trying to fine the tiny LED cover for the back of my phone or just a whole rear plastic. So far this guy tells me he can get whatever. Cellular Parts USA. Give it a shot. Best of luck.
techboydino said:
whoa, slow down UncleMike. At least 48 before getting excited. Im trying to fine the tiny LED cover for the back of my phone or just a whole rear plastic. So far this guy tells me he can get whatever. Cellular Parts USA. Give it a shot. Best of luck.
Click to expand...
Click to collapse
yeah that will be ideal if that guy can get he earpiece for it...he's got some for other models anyway. I note that he's got the pic and the title messed up for the HD2, it's listed as the "Touch HD2", with a pic of a TouchHD...and he's using the HD2 pic for the HD Mini lol.
Thanks everyone. I'll try the cell parts website that was mentioned and if that doesn't work I'll just do a claim on my insurance and get a functional refurbished one. It sucks, but what are you gonna do. I frown uppon refurbished phones. Lol. Thanks again guys for the responses.
www dot htcrepairparts dot com/internal-speaker-front-for-htc-hd-p-3043.html

I effed up, learn from my mistake...

Well, I'll be getting my $100 replacement tomorrow.
I'm usually very handy with electronics, I used to take my Blackberry's apart all the time and blow the dust out.
So I read up on disassembling the EVO and thought "this is gonna be a piece of cake". Well every set of instructions I found said it was SOO easy to take it apart, what they didn't say was they were assuming you have a replacement screen ready to go and that trying to remove the screen from the bezel separated the touch input from the backside of the glass.
Maybe I did it wrong but I broke my precious and almost cried.. a little.
I no longer have any touch input on the bottom half of the screen including the 4 buttons at the bottom. And you can see from the front how it looks like a clear sticker has been pulled apart from the glass. The LCD is fine, just totally jacked up the touch input.
So the purpose of this thread is to warn anyone else who may consider disassembling their EVO to read more than I did.
It may actually be very easy to get the thing apart, getting it back together is another story
Ouch man that sucks
From the fade
Condolences for the dear departed one. A point well taken, thanks!
Although I've "played" with dismantling many electronics during my days, this is one I would not take on. I even opted for the additional cost with BestBuy for their low price replacement for our 2 Evo's.
hmmm........
Aww man so sorry for you lost. That's great you've put up this post as I was just thinking about replacing my evo casing from all the cosmetic damage I've put on it while dropping. Thanks to you my friend this make my decision much easier.
I was going to do the same thing for the same purpose. Thanks for the heads up.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
Part the EVO out so that she may live on in someone else's phone.
BTW that quote is hilarious. I think I remember seeing that around somewhere.
lmao....smh
Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App
Reminds me when I took apart my g1 to change the housing, it was a mess of circuit boards, wires and ribbons.
Can anyone else share their similar experiences? I have a large amount of dust in the upper left in my week old evo, and would would like to clean it out.
Sent from my EVO
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
malibu_23 said:
lmao....smh
Click to expand...
Click to collapse
..what does "smh" mean?
tinybfk said:
Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
Damn, I didn't even think of looking. Actually my girl called Sprint and ordered the replacement the next morning without telling me.
It arrived this morning, its a refurb. The bezel is cracked and there's a bright spot on the screen. I called asurion right away, they shipped another already. Im keeping my fingers crossed that the next is in better condition.
Thanks for the link though!
if that was me a piece of me would have died
nebenezer said:
..what does "smh" mean?
Thanks for the link though!
Click to expand...
Click to collapse
http://www.internetslang.com/default.asp?s=smh
phatmanxxl said:
http://www.internetslang.com/default.asp?s=smh
Click to expand...
Click to collapse
lol.. yeah I've done quite a lot of that lately..
thanks for the link
nebenezer said:
lol.. yeah I've done quite a lot of that lately..
thanks for the link
Click to expand...
Click to collapse
No problem, MTFBWY
That sucks alot!!!
I did the same thing, wish I'd have read this post first! I had the dust in the upper left of my screen. I have taken this phone apart before, but not removed the glass. In attempting to remove the glass I messed up the upper right corner of the touch screen (just a small area but still sucks!) and now the tint of some colors is messed up. Also rashed up the plastic on the edges some. Oh and I did get the glass off just enough to spread the friggin dust all around haha. Oh well it's livable until June when I can get a full upgrade (hopefully the EVO 3D!). Let my post here serve as a SECOND warning for those who want to attempt to remove the dust themselves. The glass is glued down and you pretty much have to destroy the phone to remove it. Don't try it!!
dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
I ordered this same part and a new housing because I cracked my digitizer earlier this week. Thanks for the post, OP, because I plan on taking mine apart this weekend to replace it. Wish me luck! lol

replace lcd/digitizer

My screen is cracked to all hell. Is there a youtube video showing a strip down of the epic? Is there a guide on how to replace it? I have the lcd and ditizer,so I'm all set except for the actual replacement. LOL
Tia
would you mind sharing the source for the screen/digitizer for those that haven't broken their screens yet ?
Just curious.
I do not know how to tear it down yet though.
Thanks for sharing.
I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?
igotsthemagicinme said:
I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?
Click to expand...
Click to collapse
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))
There is not much for the Epic but some info for the original Galaxy S
http://forum.xda-developers.com/showthread.php?t=745262
Dissemble of Galaxy S:
http://www.careace.net/2010/06/09/disassembly-of-the-samsung-galaxy-s/
and there are some tear-down pics of the Epic
Thats prob all info there is :/
APOLAUF said:
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))
Click to expand...
Click to collapse
yea i was just saying "lcd" i got the right one i know
taking a look at the links below
ok well by the looks of it, its pretty much the same thing. i talked to a tech at a repair center, and he said he MIGHT be able to do it. if not, i think i probably have about 70% chance of getting it right. the video showed a break down right down to the digitizer, and it looks almost EXACTLY like that i have, so in theory, i should just have to go as far as gettting the back off, and putting the back BACK on the NEW digitizer/amoleisupmyassed, right?
also, just for clarification, i know i have the right one bcuz i can see the button whole thingies and its the same as what the epic has (menu, home, back, search)
thanks for the useful links& help guys
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
Did they charge anything?
lehaman310 said:
Did they charge anything?
Click to expand...
Click to collapse
Nooooope
Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.
Chabsin said:
Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.
Click to expand...
Click to collapse
How is it out of warranty when it hasn't even been out for a year? or did you mod it or something?
igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
just curious...so sprint installed the screen you purchased or they installed one of their own? I had to do this on an htc phone a while back and it was much easier than I imagined.
Sent from my SPH-D700 using Tapatalk
I purchased a bad esn phone off ebay. I run it on a different network. You think a Sprint store would do something for me?!
Demianwulf said:
I had to do this on an htc phone a while back and it was much easier than I imagined.
Click to expand...
Click to collapse
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?
Chabsin said:
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?
Click to expand...
Click to collapse
If your seriously considering using glue...crazy glue is the way to go >.> (pun intended)
I still don't understand, why are you out of warranty? samsung offers a 1 year warranty...
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App
Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
No even though Sprint has it in their system as marked "bad esn" samsung will not have to do with this. Although I don't think Samsungs warranty covers accidents, such as dropping your phone and cracking the screen.
Hope you get it figured out!
Sincerely,
D3luSi0n4L
Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Click to expand...
Click to collapse
Well Samsung has their own warranty thing...but I would confirm by contacting Samsung..don't tell them you swapped networks or anything of course..otherwise I don't think they would bother to check...
You can always flash it back too..unless phone doesnt work completely?
I got the whole screen + keyboard for under $60 on ebay. It turned out to be as simple as unscrewing and unsnapping the cover, disconnecting three connectors, removing the electronics and putting them in to the new frame. If I'd have to do it again it wouldn't take more than 15 minutes.
Sent from my SPH-D700 using XDA App

Categories

Resources