Hello my friends, my phone has an unusual problem.
Gingerbread-based Rom's microphone sensitivity is broken. My voice is very little going against the people.
Ics-based ROMs and Froyo, not have this problem, the microphone sensitivity is excellent. Only gingerbread-based ROMs have this problem.
What could be causing the problem?
How can I fix this problem?
Some parameters (build.prop) I tried but it did not work.
Does the system files are damaged, do not know.
I need expert opinion, please help ..
cayar said:
Hello my friends, my phone has an unusual problem.
Gingerbread-based Rom's microphone sensitivity is broken. My voice is very little going against the people.
Ics-based ROMs and Froyo, not have this problem, the microphone sensitivity is excellent. Only gingerbread-based ROMs have this problem.
What could be causing the problem?
How can I fix this problem?
Some parameters (build.prop) I tried but it did not work.
Does the system files are damaged, do not know.
I need expert opinion, please help ..
Click to expand...
Click to collapse
I have the same problem!
help us!!!
Related
Hi all,
I have found that once or twice a week build in microphone does not work in iMate Jasjar. I can not record anything or call anybody. I have also found that device does not make any sounds either. To resolve the problem every time I need to make soft reset. It helps but just temporary. I do not remeber that problem when I had oryginal ROM, it starts to happen after upgrade to the leatest version from iMate web site.
Please help me or explain me whats wrong.
Best regards
Marek Suski
Just a suggestion - disable Auto Gain Control (Microphone AGC). The microphone could be stuck at a very low level.
Thanks for a hint but it did not solve the problem . Do you think it is a software or hardware problem?
Best regards
Marek Suski
my BIG PROBLEM:
I am sure all of you know what a "beep" means... that is, when you make a phonecall, you hear those "beeps", indicating that at the other end, the phone is ringing... the problem is I CANNOT HEAR anything... i do not actually know when the call is connected because i cannot hear anything... the volume is so low that i can barely hear something if there is no noise at all around me... but the actuall voice volume is ok, when actually talking with somebody... only the "beeps" have the issue...
how cand i fix this? It is really annoying.. :|
ANYONE... there are hundreds users navigating but not one able to answer this? what a community...
I have this problem on the latest Tachiii custom rom (WM6.5 + TF3D2), in other words, its rom related so try a different one.
tried several... but if it's rom related... it can be fixed.. how????
bump bump bump
Maybe this program can help you. I had problems with my voice and I have resolved this way. If you want a try.
View attachment ricky-diamond-volume-max-boost.cab
thanx... i will give it a try... can it be uninstalled, should anything go wrong?
I have a ZTE Blade for 3 months and everything works fine.
Yesterday, I had a call. The phone ringed for 2-3 times and then only vibration.
Sinse then, I have no sound at all!!!
Neither the music or the applications, nor the alarm.
Obviously, all the settings have high volume and it is not muted!
The phone is not rooted.
Anyone with similar problem? Any idea how to fix this?
Thank you in advanced!
Similar problem here... Did you fix the problem? how ?
any help would be nice.
thanks in advance
johnyboy80 said:
Similar problem here... Did you fix the problem? how ?
any help would be nice.
thanks in advance
Click to expand...
Click to collapse
Have Either Of You Tried Rooting And New ROM?
If you've installed any widgets with sound toggles try toggling them on and off several times.
This happened to me once, and the above worked (for me anyway).
hi , just got my first android ( zte blade)... only problem is that i cannot hear it ring and i am missing all my calls . i cannot adjust the volume even though it says its on max!
it appears a similar problem as yours "stefka1" ... can any of you give me any help/advice please
paul
Hi i've a huawei x5 with the last realese of oxygen and franco kernel, and my microphone works bad, my tell me that they can't hear me right, so i want to install the stock rom to test to see if the problem is for the software or hardware, what is the latest stock rom and where i can download it?
There are some problems with Mic volume on Oxygen...But it shouldn't be that bad...Anyway, check your PMs for Stock Rom instructions.
if you edit the "hw.secondary_mic=0" line to "hw.secondary_mic=1" from build.prop it should be fine.
Experiences said:
if you edit the "hw.secondary_mic=0" line to "hw.secondary_mic=1" from build.prop it should be fine.
Click to expand...
Click to collapse
ALL people that tried this crap -said iit makes things worse with that setting.
Anyway soft will not help in this situation. It's bug in hardware/drivers. Some people are lucky to get good working cancellation others do get bad ones.
Also, i think that parameter is used to tell the phone to use secondary mic as primary.
Experiences said:
if you edit the "hw.secondary_mic=0" line to "hw.secondary_mic=1" from build.prop it should be fine.
Click to expand...
Click to collapse
That just placebo effect, i think
Problem Headphone/Mic
I only use the U8800 heaphones/mic and I must not change because the pinout is different (begining by the point):
Sound.L/Sound.R/Mic/Ground.
The others like Samsung, LG, etc. the pinout is:
Sound.L/Sound.R/Ground/Mic.
If we chage it the sound is bad because it return by Mic, not by ground. The Mic sound is also bad
Or your problem is another?
ValenteL said:
Problem Headphone/Mic
I only use the U8800 heaphones/mic and I must not change because the pinout is different (begining by the point):
Sound.L/Sound.R/Mic/Ground.
The others like Samsung, Lg, etc. the pinout is:
Sound.L/Sound.R/Ground/Mic.
If we chage it the sound is bad because it return by Mic, not by ground.
Or your problem is other?
Click to expand...
Click to collapse
People here are talking about phone mic. And that when they talk people do not understand them because of noise cancellation chops up their voices and removes some part of it.
I have the same problem, others have trouble to hear my voice!
I think I was the first to put this question and until now, not a single question was effective... I think it's like tommyxoft said... With some peolpe the secondary microphone erases some voice parts, leaving voice muffled... I guess it is related to the tone of our voice...
I sent my X5 to be serviced and when I got it back I tested "the bad mic thing" again with the stock ROM and everything was fine. Everyone could hear me loud and clear. Then, I rooted the device and flashed Oxygen 2.2.2 and I tested it again. Problem was reborn once again!!! I tried B160, B130 v8, Miui also with same results. Obviously, it's a software thing but I don't want my X5 to be unrooted and with stock ROM! So I made peace with it. The only sure thing is to cover the secondary mic with your finger when making/receiving calls. That works perfect!!!
P.S. In addition, the "hwVolumeFactor.cfg" file is missing. It is not located in the "/system/etc/hwVolumeFactor.cfg" directory anymore. I've searched all folders with no luck. Any ideas???
You can disable secondary microphone by sellotape
Hi everybody.
I have read several times that there are people who have trouble calls. Sometimes people do not listen to me, especially when I have to speak low.
Is there any MOD or a MODEM to solve this?
Im from spain!
No body?
this problem to me also ''Sometimes people do not listen to me, especially when I have to speak low'' why and how to fix, anybody knows the solution?
Depends on kernel firstly... Dorimax has a Mic gain feature which can be used to boost call gain
danial.aw said:
Depends on kernel firstly... Dorimax has a Mic gain feature which can be used to boost call gain
Click to expand...
Click to collapse
I was on stock and now i am on Bruce Kernel 0.41. Can yo give me info about this feature? a link maybe?
I'm not sure how Bruce kernel works but Dorimax has a Mic gain slider in Stweaks which allows the customization