Hi all,
I have found that once or twice a week build in microphone does not work in iMate Jasjar. I can not record anything or call anybody. I have also found that device does not make any sounds either. To resolve the problem every time I need to make soft reset. It helps but just temporary. I do not remeber that problem when I had oryginal ROM, it starts to happen after upgrade to the leatest version from iMate web site.
Please help me or explain me whats wrong.
Best regards
Marek Suski
Just a suggestion - disable Auto Gain Control (Microphone AGC). The microphone could be stuck at a very low level.
Thanks for a hint but it did not solve the problem . Do you think it is a software or hardware problem?
Best regards
Marek Suski
Related
Hi there,
i'm stuck now with a very strange problem.
I was playing with the A2DP patch when i discovered that my prophet is making noise in the built in speaker when i'm receiveing or making calls.
After 2 hard resets (the Clean Data and the Camera/Comm buttons + reset methods), it's still the same. I can't use the phone as a phone!
Also same with headphones. It sounds like the volume is way too high. Almost unintelligible.
Only in Bluetooth it works correctly.
Any ideas?
It is a O2 XDA flashed with French QTEK S200 ROM, so of course waranty is gone
Help help help
Hi there.
Nobody had the same issue with his Prophet?
After some investigation, i came up with the idea that it was because i was using Wireless Stereo with an A2DP device, but it suddenly came back, and even with Bluetooth disables/devices deleted/unregistered from the phone, it's still the same.
I don't know what to do. I'm forced to use my Bluetooth headset to use my phone :?
I didn't try yet Hard Resetting my device, but the other day, when i wrote the previous post, it didn't help.
So, You, who are reading this, please give me some advices
I'm lost.
i have the problem in the other one, in the normal use the sound is sooooooo extrem loud. in the bluetooth mode works it perfekt.
nighty
Well, it depends how you see (hear) the issue.
I call this noise, but in fact it seems that the sound is pushed to the max. I can hardly understand the words people say to me through the built in speaker.
Maybe we have the same issue, but i call it "noise" and you say "extremely loud".
Do i understand well that you're living with this?
Did you also played with A2DP patch? Or is the origin of your issue different?
Personnally, i'd like to find a solution.
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Good,
i don't feel alone now
If one of them answers you, please let us know on this thread.
Maybe there are also other people with same or similar issue that are too shy to say it here
They'll like also to know how to fix.
I can't believe we're just 2 with this issue :roll:
Nightly,
did you have an answer for all the emails you've sent?
I'm planning to flash an O2 ROM back to the XDA Neo and sent it to repair, but if you've found the solution, i'd be happy to read it before i go to Germany.
nighty said:
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Click to expand...
Click to collapse
Hey, i was wondering did u ever find a solution for this problem as i have not 1 but 2 prophets with this problem thx
I have got an O2 trion which has a rather strange feature. When I call a number which is busy at the moment the busy tone is always delivered through the external speaker even though the external speaker is not on. HTC support says they have never heard of this problem and I should send the device in. I hoped that the ROM update HERMIMG_O2_1.25.207.1_SHIP.nbh whould solve the problem but it does not.
Does anybody else have the same problem and is there a solution?
ThankX
Stefan
Yes, I have same problem.
Same here on my V1605. It seems that there is stiill no way of resolving this issue.
See thread: http://forum.xda-developers.com/viewtopic.php?t=61115
I've also discovered that when the engaged tone sounds through the speakerphone I'm no longer able to hear the phone ring - it goes straight to call divert. Will phone CS tomorrow to see if they have any answers.
Hi dIesigner_1,
thank you for the link to the existing topic for this problem. I could not find it before my post.
I also do have the screen alignment problem so I sent the device back to O2. I am looking forward what will happen and if both issues can be resolved. :?:
same issue
hi,
i have the strange busy tone on speaker effect too.
thou hapily it doesn't seem to affect my call routing.
would be interested in the solution, though!
cheers.
I have the same issue on my HTC TyTN, not always but it happens random from time to time. Very strange behavior...
*push*
any solutions yet?
that is anoying as hell!
Hi,
I got a new O2 trion as an exchange device due to screen alignment problems. I also claimed the external speaker bug. Guess what! The screen alignment is ok so far but the external speaker bug is still there. I called the company CS which is responsible for the exchange. They claim never to have heard about the bug and they offered another exchange...I do not belive this will help as long as nobody complains about the problem and HTC is forced to do something.
I get that sometimes too
Found a solution from another thread
workaround update: change "Script" value to "ap" for tone to play only once, and change "Sound" value to "busytone.wav" (comes in rom, at least for HTC TyTN) - it's not loud at all.
Click to expand...
Click to collapse
Thanks to shadowcaster for this tip.
Also if you want to disable the sound just remove the Script key.
elysion said:
Found a solution from another thread
Thanks to shadowcaster for this tip.
Also if you want to disable the sound just remove the Script key.
Click to expand...
Click to collapse
Can anyone explain the remedy for this problem in the most lamens of terms for someone still soaking wet behind the ears regarding my Tytn and WM6 and smartphones in general? Please?
i went to use my vodafone VPA (working fine for last few months) for a phone call, and the person i was calling couldnt hear anything - bad line i thought.
then i called back and the same...
then my house fone... the same, and when i record a video or voice note, if i shout into the microphone and play it back at max volume, i can just about make out what i'm saying...
any idea's on how i can fix this? i've tried a hard reset, and taken the phone apart to see if its anything obvious (there isn't) i've also tried enabling/disabling microphone AGC - no avail
Dave
no help at all?
Dave
i have the same problem with my imate jam initially i thought it might be a software problem so i reflashed it with the origional Imate Rom and so now differance i played with all the settings i could find to no avail and finaly gave up
since my jam was still within its warranty period i gave it in for fixing i should be getting it back anyday now and if i can find out what they did with it i will definetly post it here
Just talked to the guy i gave my phone to today he said tht he tried changing the microphone part but it still had the same problem it seems that there is some problem with an IC ( whatever that is) and he has more chances of killing it totally then actually fixing it if he tries to change it
microphone is bad on phone calling...
hi,
I have same problem, too
mic. volume is very bad when I calling . but it is working good when I record anythings.
how can I change mic.volume on calling to like recording level ? ? ?
need to change some values on register? or what?
who can help me?
I have MDA III
WM5
veysel
Istanbul Turkiye
Microphone AGC
Deactivate Microphone AGC in the settings.
And your problems should be solved.
Hi All!
I've recently bought the device. It's really cool, but there is one big problem.
When I call, party can't hear me. Mic volume is too low, even if i talk right into the microphone, speech is not high quality. But when I run voice recording, all is very good, so the problem is not in a hardware mic.
I've tried to upgrade several firmwares, but don't know which one should help me. The new one did not fix the problem.
Any thoughts? Maybe soft or registry key?
yes..
im also facin the same problem.. huhu cud anyone help?
yea!
i just followed the steps to update rom, walla prob resolved! but unfortunate i updated with imate rom 1.12 though, no pdf n ppt viewer preinstalled huhu
try with the pressure of 10 seconds of the green key when you call.
i had the same problem!
i have jasjar n i did a hard reset but after that its sound has been gone no speaker no ringer kindly suggest me tested solution as soon as possible thanks
Welcome to forums
Have a deep read on my signature link, ever there you can find some fixes regarding sound problems