phone doesnt connect in usb mode - Nexus S General

i just noticed my nexus s wont bring the option in status bar to connect it via usb storage,but only charges the phone. i reboot into recovery--mount and storage and i mounted usb storage but my pc wont show that my phone is connected. im running aokp build 31

ahmmyreal said:
i just noticed my nexus s wont bring the option in status bar to connect it via usb storage,but only charges the phone. i reboot into recovery--mount and storage and i mounted usb storage but my pc wont show that my phone is connected. im running aokp build 31
Click to expand...
Click to collapse
i flashed stock 4.0.3 and the problem still persist.

did u try restart your PC ??
this can be pc related thing... have another pc in family ? or friend's house, go and try to connect your ns.

could also be a dead usb cable.. try another cable?

Did you enable fast charge? If so disable it and it will work. Disable it, then plug in again
Sent from my Crespo using xda premium

thegtfusion said:
Did you enable fast charge? If so disable it and it will work. Disable it, then plug in again
Sent from my Crespo using xda premium
Click to expand...
Click to collapse
He flashed to stock so I would rule that out I'm behind the USB cable happens to me a lot
Sent from my Nexus S 4G using Tapatalk 2

dreamsforgotten said:
He flashed to stock so I would rule that out I'm behind the USB cable happens to me a lot
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
Ahaa I didnt read that.. maybe its the usb port of the computer also, happens a lot when im busy with my laptop. also the cable as you say.

Weird my phone is going through the same thing after flashing AOKP build 31, tried several USB cables and computers..
Thought my phone broke..
I never have enabled fast charge..
Wonder what could be the issue?
I also flashed back to stock 2.3.3 but still can't mount USB.
Sent from my Nexus S using Tapatalk 2

Ok good news and weird finding. Accidentally hit fast charge switching tabs in ns tools. I ended up in the same boat as you guys. I opened ns tools and toggled it back on. Plugged USB and it worked. problem is it was showing as on so I toggled off reconnected and it gave me the mount USB and adb prompts. Scary part is it persist for you guys on a stock flash. That's not good. Luckily mines back if you hit the button toggle it again if you didn't yet don't! !
Sent from my Nexus S 4G using Tapatalk 2

dreamsforgotten said:
Ok good news and weird finding. Accidentally hit fast charge switching tabs in ns tools. I ended up in the same boat as you guys. I opened ns tools and toggled it back on. Plugged USB and it worked. problem is it was showing as on so I toggled off reconnected and it gave me the mount USB and adb prompts. Scary part is it persist for you guys on a stock flash. That's not good. Luckily mines back if you hit the button toggle it again if you didn't yet don't! !
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
I actually tried flashing a fastcharge enabled kernel yesterday, toggled on and off to see but to no luck..sucks.
Sent from my Nexus S

Update..
Got it fixed, what i did was flash AOKP build 31 again and flash my favorite kernel (Trinity) booted the OS and in Rom control/start up tweaks and enable SD boost..then pull battery...
Boot the phone up and connect to CPU and it worked.
I knew it wasn't the cable because i tried with 5 other cables..
Sent from my Nexus S using Tapatalk 2

I have the same problem..
Usually the usb connector at nexus s full of dirt or fungi...
Using a toothbrush and hand sanitizer to scrub ni..
Many user have this kind of problem beside technical error from kernel or rom..
Sent from my GT-I9100 using xda premium

al_madd said:
I have the same problem..
Usually the usb connector at nexus s full of dirt or fungi...
Using a toothbrush and hand sanitizer to scrub ni..
Many user have this kind of problem beside technical error from kernel or rom..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
At least in my case it wasn't that, i keep my phone clean (air duster), when i had my issue i cleaned it again just in case and it would persist...
It must of been i toggled fast charge by mistake and reflashed another kernel without ticking it off..that's the only thing i could think of..
Sent from my Nexus S using Tapatalk 2

Related

Phone isn't recognized in download mode on computer

I'm sure this has already been posted but couldn't find it. But I was trying to flash one of the roms that were posted in here with odin3 and when I put the phone in download mode and Hooke it up to the computer I get either device not recognized or device.malfunctioning but mass storage works no problem. I use the cable that came with the phone and used every USB port on the computer. Any suggestions?
Sent from my SPH-D700 using XDA App
Have you installed Samsung Galaxy S drivers?
I had that problem when trying to flash EB13.
From what others have said here (and my personal experiences with trying to flash EB13) the cable the Epic comes with is crap.
When using another cable, I had much more luck in getting Odin/Windows/Samsung Updater to see my phone.
YMMV though, but it worked for me.
I think you should re-install the drivers, and try a USB port on the back of the computer. Usually the ports on the front of the computer aren't the best for these things.
Sent From My Command Center... (aka basement)
Reboot computer and reboot phone and try it again thats what worked for me in the past
Reinstall the Epic drivers from Samsung. Make sure to use the back ports on the back of your computer that are on the motherboard. These will provide better and cleaner power to your device, also cycle both the computer and the phone and don't plug in the device till after you have went into download mode. This should fix your problem.
Same thing happened to me. I tried using the micro USB cable from my wifes Blackberry. Works great now. Samsung's cables suck
87Octane said:
Have you installed Samsung Galaxy S drivers?
Click to expand...
Click to collapse
I've installed uninstalled and installed the drivers again. Tried the USB ports in the front and back of the computer. I'll try and buy a new cable and see if that works.
Thanks for all the suggestions
Sent from my SPH-D700 using XDA App
Have you tried turning it off and on again?
dmanwithnoname said:
Have you tried turning it off and on again?
Click to expand...
Click to collapse
Yeah I've tried everything I could think of except using a different cable. Gotta wait and buy a new cable
Sent from my SPH-D700 using XDA App
ichefae85 said:
Yeah I've tried everything I could think of except using a different cable. Gotta wait and buy a new cable
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Dude I had this exact same problem. What os are you running? and is it 32 or 64bit? I had this problem on windows 7 64bit. I had to connect my to an xp os and wham it detected it fine and did its thing. Weird i know but it worked.
P.S: changing the cables for me didn't work. I just used another computer which was on xp.
Pvt WhoOkid said:
Dude I had this exact same problem. What os are you running? and is it 32 or 64bit? I had this problem on windows 7 64bit. I had to connect my to an xp os and wham it detected it fine and did its thing. Weird i know but it worked.
P.S: changing the cables for me didn't work. I just used another computer which was on xp.
Click to expand...
Click to collapse
I'm using a 32bit with XP. So I don't know haha
Sent from my SPH-D700 using XDA App
im having the same issue on EB13..
every port, any computer from win xp Pro to win 7
to 3 different cables..
it charges FINE.
wont mount or recognize in computer...
i am thinking...... something i flashed....
like asop screen (from dk28) or genocide 0.2a kernal or something..
dmbatson said:
im having the same issue on EB13..
every port, any computer from win xp Pro to win 7
to 3 different cables..
it charges FINE.
wont mount or recognize in computer...
i am thinking...... something i flashed....
like asop screen (from dk28) or genocide 0.2a kernal or something..
Click to expand...
Click to collapse
I can get mine to mount no problem it's weird
Sent from my SPH-D700 using XDA App
I recently reformatted and couldn't get odin to work. I put my phone in debug mode and when I connected it windows ended up installing something else and everything worked after that.
Windows 7 64 bit with 64 bit samsung drivers.
Sent from my SPH-D700 using XDA App
ichefae85 said:
I'm using a 32bit with XP. So I don't know haha
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Beats me then. Try a different computer.
Guys I've had this issue and tried everything you guys have and some. Look at the port directly on your phone. there are tiny little copper contacts on the tooth that can get bent.
You will have to use some tweezers to get it back down but look at this before buying a new usb cable as this was my issue
seoulseek80 said:
Guys I've had this issue and tried everything you guys have and some. Look at the port directly on your phone. there are tiny little copper contacts on the tooth that can get bent.
You will have to use some tweezers to get it back down but look at this before buying a new usb cable as this was my issue
Click to expand...
Click to collapse
I checked that and didn't find anything bent in the USB port on the phone. Might try new cable and different computer when I have access to both
Sent from my SPH-D700 using XDA App
Okay stupid question. Doest it make a difference if the phone isn't fully charged? Haha if so then I'm stupid haha
Sent from my SPH-D700 using XDA App
I have done flashes with thirty to forty percent battery. I don't think odin checks your battery. I would caution against flashing with to low of a battery as your phone can die during a flash.
Sent from my SPH-D700 using XDA App

[Help] Nexus S 4G Won't mount Usb Storage.

In reality I really don't know where else to go I know that there is normally every time that you connect your phone it leads you straight into the Usb Storage now when I connect it. It just go straight into charging mode is there anything. Adb shell won't and I have to wipe it by tomorrow to send it our to Best buy! Help Please!
Is it rooted? If not wipe from the bootloader?
Sent from my PC36100 using xda premium
I had this problem. Here is how I fixed it. I deleted all Android phone and USB storage drivers from my computer. Then I plugged in the phone to USB. Then I quickly removed the USB from the phone while the computer was looking for drivers. Then everything worked fine again.
Sent from my Nexus S using XDA App
If it's just for wiping why don't u do a format USB?
Oh I guess u wanna backup too... if u have wifi just connect via wifi and copy files... u can access ur comp from es file explorer on wifi
Wow I had this same problem about a week and a half ago. I never did find a solution. I tried multiple computers. I couldnt even unroot it because the computer did not detect it even in fastboot mode. I ended up sending it back to samsung to be repaired.
Alopez_45 said:
In reality I really don't know where else to go I know that there is normally every time that you connect your phone it leads you straight into the Usb Storage now when I connect it. It just go straight into charging mode is there anything. Adb shell won't and I have to wipe it by tomorrow to send it our to Best buy! Help Please!
Click to expand...
Click to collapse
What data are you trying to backup? I would go into recovery, wipe data/cache, reflash the ROM, then test it.
You can backup apps/settings with titanium backup before you wipe.
Alopez_45 said:
In reality I really don't know where else to go I know that there is normally every time that you connect your phone it leads you straight into the Usb Storage now when I connect it. It just go straight into charging mode is there anything. Adb shell won't and I have to wipe it by tomorrow to send it our to Best buy! Help Please!
Click to expand...
Click to collapse
Hey buddy youre not alone, mine is doing the same. Get a USB device not recognised error. Not found a solution yet
I too am not able to achieve a data transfer. I am running cm7 nightlies with Matrix kernel. Thought it was my cable going bad - replaced it and still no luck.
I'm assuming ur on bfs
Bfs causes this. Go cfs
Sent from my HTC Sensation 4G using XDA App
I've tried it all to get my phone connected. It only works in bootloader.
Sent from my Nexus S 4G using Tapatalk
I had this problem I fixed it by removing the battery plug usb to phone and computer then reinsert the battery then turn on the phone. I ran into this problem when I upgraded to 2.3.7
Sent from my Nexus S 4G using Tapatalk
mathkid95 said:
I'm assuming ur on bfs
Bfs causes this. Go cfs
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
I am on CFS. Never even tried BFS.
Ihad that same problem the only fix for me was calling sprint then they sent me to a repair shop which COULDN'T fix it so they mailed one to the repair center & I got a new one
Sent from my Nexus S 4G using XDA Premium App
Fixed mine with some serious cleaning of the USB port. I also tried buying a new cable, downloading drivers, etc. in the end, it was just a bad connection.
Sent from my Nexus S 4G using xda premium
I've tried many cables, almost positive mine is a pure driver issue.
Sent from my Nexus S 4G using Tapatalk
I've tried absolutely everything in this thread. Lost USB connectivity completely on my phone. Doesn't matter what machine, what OS, or what cable, or what drivers are installed. I'm assuming it must be a hardware issue at this point. Doesn't even work in bootloader.
For those updating OTA to 2.3.6 via OTA and needing to re-root their phones, make sure you're not having this issue. Being stuck without root is a pain in the ass!
Clean your USB port on your nexus! Clean it well.
Sent from my Nexus S 4G using xda premium
anaglich said:
Clean your USB port on your nexus! Clean it well.
Click to expand...
Click to collapse
Good advice actually. Scrubbing it with a dry toothbrush + using a a brand new 3 inch USB cable made the sucker finally connect.
Must have been a combination of bad cables and poor USB port hygiene
Yep, had to take a knife, brush, and alcohol swabby to mine.

Ever since upgrade phone not recognized by pc

Is there sum driver not in the new software thats making my pc not recognize my phone anymore
sent using my cup phone nukka
You should choose update driver in device manager and allow Windows Update to search for new drivers.
Could also be a bad cable. They are cheap crap. Get a Blackberry or Palm Pre cable.
Sent from my SPH-D700 using XDA App
Or maybe the 2 of them are going through hard times... Have you tried sending them to counseling?
Lol yeah whut are the odds the cable went bad same day i got the update bought a new cable ****s fine .
sent using my cup phone nukka
Yuck I wouldn't want a cable that ****s fine.
deisel said:
Lol yeah whut are the odds the cable went bad same day i got the update bought a new cable ****s fine .
sent using my cup phone nukka
Click to expand...
Click to collapse
Well **** happens...lol. Glad that worked.
Sent from my SPH-D700 using XDA App
The Root said:
Or maybe the 2 of them are going through hard times... Have you tried sending them to counseling?
Click to expand...
Click to collapse
digiblur said:
Yuck I wouldn't want a cable that ****s fine.
Click to expand...
Click to collapse
LOL, what a couple of comedians!
deisel said:
Lol yeah whut are the odds the cable went bad same day i got the update bought a new cable ****s fine .
Click to expand...
Click to collapse
I doubt the cable "went bad," more like "was a ****ty cable from the get-go." The stock cables are notorious for having connection issues, especially when using Odin or Heimdall.
Thought the cable was bad so i tried wifes evo w same cable and it connected instantly
Can the charging port go bad and only allow a charge and not a data transfer.
So im back to square one phone stopped connecting to pc since update to gingerbread
Any suggestions or insight on the subject
Plz no stupid grammatical comments or sum other dumb **** thnx
sent using my cup phone nukka
What type of cable is it I know lg ones don't work for samsung but will for the evo for some reason. Also it could be windows screwing with you. Is it showing it as an unknown device if so I know a workaround its not too difficult.
Sent from My OG Epic
deisel said:
Thought the cable was bad so i tried wifes evo w same cable and it connected instantly
Can the charging port go bad and only allow a charge and not a data transfer.
So im back to square one phone stopped connecting to pc since update to gingerbread
Any suggestions or insight on the subject
Plz no stupid grammatical comments or sum other dumb **** thnx
sent using my cup phone nukka
Click to expand...
Click to collapse
You spelled fail wrong.
Lol just playing, I say you try installing or reinstalling drivers on the computer, last option would be nandroid your current set up on your phne odin then restore and it should work
Sent from my SPH-D700 using xda premium
Just use airdroid app, my phone refuses to connect to any computer but my sister's laptop, that includes odin. I just gave up on usb's lol
Sent from my SPH-D700 using xda premium
I had this same issue recently and come to find out, it was the cable! Its a cheap crappy cable. I used an old one from a blackberry and it worked better than ever!
Sent from my SPH-D700 using XDA App
Have you checked to see if USB Debugging got checked?
I used a kodak usb cable w a ferrite choke then a blackberry cable a sprint cable and the samsung cable that came w the phone then i tried the evo cable from my wifes phone none worked on my phone they all worked on hers
sent using my cup phone nukka
deisel said:
I used a kodak usb cable w a ferrite choke then a blackberry cable a sprint cable and the samsung cable that came w the phone then i tried the evo cable from my wifes phone none worked on my phone they all worked on hers
sent using my cup phone nukka
Click to expand...
Click to collapse
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
flastnoles11 said:
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I feel like that would definitely be the most likely culprit, seeing as how he updated and it stopped working.
Sent from my SPH-D700 using XDA Premium App
flastnoles11 said:
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Having the same problem and that was the fix!! Thanks headed your way!
flastnoles11 said:
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
+1 for this. Also, even if your phone is set to PDA, select Modem and then select PDA again. That's what I had to do with my gf's phone to get it to work
Ryan
flastnoles11 said:
Check and make sure your phone didn't go back to usb modem... dial ##8778# and make sure usb is set to pda and not modem...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
omg i have tried a million different cables and was about to replace the phone thru asurion. this worked!!! thank you so much!!!
The dial code also fixed me!!!!!! But.... Now the usb connected continuously pops up like every two second......
Sent from my SPH-D700 using XDA App

USB charging/transfer not working

I'm not sure if it is because I upgraded to CM10.1 or because I had my phone plugged into a charger all night that didn't even charge the phone, but my USB port won't connect to my computer anymore. When I connect it, it says the device malfunctioned. What could be wrong? I feel like it's because the other charger messed it up.
scottocs said:
I'm not sure if it is because I upgraded to CM10.1 or because I had my phone plugged into a charger all night that didn't even charge the phone, but my USB port won't connect to my computer anymore. When I connect it, it says the device malfunctioned. What could be wrong? I feel like it's because the other charger messed it up.
Click to expand...
Click to collapse
10.1 USB is broken. It may work if you restart the phone while plugged in
Sent from my XT907 using Tapatalk 4 Beta
sloosecannon said:
10.1 USB is broken. It may work if you restart the phone while plugged in
Sent from my XT907 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thank you. That makes me feel a lot better that my phone isn't messed up.
scottocs said:
Thank you. That makes me feel a lot better that my phone isn't messed up.
Click to expand...
Click to collapse
No problem
Sent from my XT907 using Tapatalk 4 Beta

no usb host!!!

I have a nexus 7 WiFi 16 gig refurbished from wallmart. Using for a car install, tried 3 different otg cables confirmed working on n7 2013 and made my own cable with external power and no go. Host mode will not trigger. No mouse, USB ,SD........ I get no notification that host mode is entered. Tried USB ROM, vanir, cm11, bs harmony, stock, every kernel. Still get nothing. Any ideas? Have power and volume soldered to some momentary switches. Any ideas I was thinking of trying to trigger host by shorting the pins on the tablet itself! Bad idea? All connections in the tablet look good.I am at a loss. Any suggestions are appreciated!!
Download stickmount.
Sent from my Nexus 7 using XDA Premium 4 mobile app
What you are looking for is a kernel that provides simultaneous otg/host mode charging. Unfortunately, if you are running a rom newer than 4.2.2, you cant get it. All kernels that gave this capability were based on the work by Timur. He left that scene and never brought the hack to 4.3 +. If you install a 4.2.2 rom, you can still do it. If you google "Timur kernel" it will take you to his rootzwiki thread. He has a standalone kernel, or an entire rom dedicated to your very situation. Most people on the thread are car install users. Tons of great info there.
To the reply above me, the op is referring to being able to mount otg and charge at the same time, so stickmount would do no good.
Sent from my SGH-I997 using XDA Premium 4 mobile app
rebel1699 said:
What you are looking for is a kernel that provides simultaneous otg/host mode charging. Unfortunately, if you are running a rom newer than 4.2.2, you cant get it. All kernels that gave this capability were based on the work by Timur. He left that scene and never brought the hack to 4.3 +. If you install a 4.2.2 rom, you can still do it. If you google "Timur kernel" it will take you to his rootzwiki thread. He has a standalone kernel, or an entire rom dedicated to your very situation. Most people on the thread are car install users. Tons of great info there.
To the reply above me, the op is referring to being able to mount otg and charge at the same time, so stickmount would do no good.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Isn't this a stock feature? My N7 in stock 4.4.2 has no OTG problems whatsoever, and provides energy without problrms.
No, not a stock feature. Exactly how are you charging and mounting otg simultaneously, cable wise?
Sent from my SGH-I997 using XDA Premium 4 mobile app
rebel1699 said:
No, not a stock feature. Exactly how are you charging and mounting otg simultaneously, cable wise?
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I use a generic OTG cable i got for like 5 bucks (it doesn't supply any kind of power). Mouse, gamepad and keyboards works as soon as i connect them. For drives and SD cards, i use Nexus Media Importer. All in stock ROM and kernel (4.4.2), without using root.
The op is referring to charging the N7, and connecting otg devices at the same time. The reason his otg is not working is because he connected the charging circuit first, which blocks host mode (otg functionality) from registering. The same happens if otg is hooked first, charging will not occur. It takes a kernel with those certain abilities to use otg and charge the n7 at the same time (host mode charging). Likewise, it takes a special cord, which has either 2 male usb and one female, or 1 micro usb, 1 male usb, and 1 female usb. Everything you need to know about this is here http://mehrvarz.github.io/usb-host-mode-power-management-nexus7/
Sent from my SGH-I997 using XDA Premium 4 mobile app
tried it all
I have tried usb rom and stick mount,and nexus medis importer ect...... my problem is no usb host at all. not even a usb mouse. i have tried diffrent roms and kernels. i think maybe a hardware problem. i made my own usb host cable it works with my n7 2013 note 3 , but not my 2012 n7. nothing does. i also bought a few cables from amazon, no go. the tablet doesnt enter host mode. i tried usb diagostic app from chainfire. support is the for host in the kenels but host mode will not trigger.. just tring to see if anyone had similar issue and found a fix.. thanks for the suggestions.. kang-aroo kernel has timurs patches synced for 4.4.2 so does bricked and m kernel. OTG and charging IS NOT my issue, its no host at all. tablet will not recognize anything i plug in with external power or without....
As i thought the tablet was defective,recieved my new one no problems with usb host......
Awesome, glad you got it replaced. I use usb host mode charging, so I know how valuable it is. But, I am glad you posted your issue, because I was unaware of the existance of the kang-aroo kernel till you mentioned it. Running it on all 4 roms on my N7, and really happy with it.
Sent from my Nexus 7 using XDA Premium 4 mobile app
rebel1699 said:
Awesome, glad you got it replaced. I use usb host mode charging, so I know how valuable it is. But, I am glad you posted your issue, because I was unaware of the existance of the kang-aroo kernel till you mentioned it. Running it on all 4 roms on my N7, and really happy with it.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Kangaroo is a great kernel , try oxydo has the same features but it also has doubletap2wake and s2w it's not enabled by default but trickster mod will turn it on or by editing a few files in the sys folder.In the kangaroo thread there is a manager app like USB rom has for a car install. Works on both kernels. Are you using multirom. I haven't tried it yet. Any issues?
Been using multirom since it was released over a year ago, and never had an issue. I cant imagine my N7 without it.
Sent from my Nexus 7 using XDA Premium 4 mobile app

Categories

Resources