Related
Guys... I fixed my wifi, 3g, and Gps on 1.7.0....
1. back up your rom with nandroid (for safety)
2. go into custom recovery (streakmod or clock work) and wipe your delvik cache (i used streakmod)
3. Wipe your entire cache partition (very important)
4. Wipe all user data and perform reset using custom recovery streakmod or clockwork (not the streak's for now)
5. Let the phone boot up completely and it will force close everything really bad... let it sit for a couple minutes
6. reboot phone into DELL's 4 option recovery menu and select option 1 factory reset
7. after it factory resets using dells recovery reset it will boot up normally
8. go through phone set up as usual and use the ADW launcher NOT the other launcher
9. Configure phone to your liking and voila!!! you should be good
10. If your WIFI doesn't work at this point boot into streakmod or clockwork and wipe your dalvik cache 1 last time and your wifi will come back without a doubt.
11. As god is my witness this worked for me. If you find that it worked for you don't hesitate to hit the thanks button. I hope you have the same luck as me. Thanks
**EDIT** Been running my rom for approx 10 hours now and still no problem.... Also, WHATEVER YOU DO... DON'T USE TITANIUM BACKUP TO RESTORE YOUR APPS... Your apps will just force close... if this happens simply uninstall and reinstall and it will be fixed.
what exactly does this fix? initially when i updated from 1.6, my wifi and 3g were connected but i couldnt browse any sights, i just simply rebooted and everything was fine again
rptw said:
what exactly does this fix? initially when i updated from 1.6, my wifi and 3g were connected but i couldnt browse any sights, i just simply rebooted and everything was fine again
Click to expand...
Click to collapse
A tremendous amount of people are having issues with wifi,gps,data, and notification bars after updating to 1.7.0
This seems to be because they (including me) went from 1.6.1 to 1.7.0 and did one of 2 things... they carried over the perfmod and that is causing problems, and or the update itself is having issues updating.
Doing the steps that I have laid out has fixed 3 dell streaks and I am now running on a 99% stable version of 1.7.0 with perfmod in place which gives me quadrant scores of 2500+
I went from 1.6.1 to 1.7.0 and had wifi/3g/gps issues. I used my own combination of above to fix plus added the following to my build.propc to boost wifi/3g performance:
ro.ril.hsxpa=2
ro.ril.gprsclass=32
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.hsupa.category=5
My phone worked great for a few days then rebooted on its own one evening and started cycle rebooting at the Dell logo. I was able to get into the streakmod util and reflash 1.7.1 and I was up and running again. This time my build.prop was missing the same entries, but performance seems ok.
by any chance, does this fix the fact that wifi doesnt work when i switch from data to wifi and data doesnt work when i switch from wifi to data? i have to reboot everytime i switch connections now
rptw said:
by any chance, does this fix the fact that wifi doesnt work when i switch from data to wifi and data doesnt work when i switch from wifi to data? i have to reboot everytime i switch connections now
Click to expand...
Click to collapse
Yes. I had that same problem and it does fix the issue
Using 2 and 3 might be enough
Hi,
for me a full wipe this is no option. I have so many things customized and I hate to enter all my crendetials and other stuff again. But I don't think this method is needed for everyone. I just did the following:
1. back up your rom with nandroid (for safety)
2. go into custom recovery (streakmod or clock work) and wipe your delvik cache (i used streakmod)
That's all. After the boot my wifi, which made frequent problems worked again like a charm.
I also disagree all those "DON'T USE TITANIUM BACKUP TO RESTORE YOUR APPS" rumours on XDA. From my experience it is actually no problem to restore the APPs. And ONLY the apps, WITHOUT data! After that you can restore selected data for the apps where you customized to much to let it go. For my last full wipe this were only about 25 apps (from 250) where I also restored the data. And it is absolutely necessary for me to restore e.g. the wifi secrets, as I have many of them and I definitely do not want to enter them every time again, because of a full wipe. And the same applies to K-9, gmail, twitter, imo, yaaic ...
KarlchenK
So you edit the build.propc file to boost wifi?
brucealeg i see you edit the entries in the build.propc file in the streak to boost the wifi radio power if you did that does that mean the wifi antenna can be boost to better reception
if dj steve is here you can look in to this this would be awsome cuz that means that we will be able to boost the wifi just like it was possible on the iphone 3/ ipod touch 2 and 3 by just installing wififofum,
But this would be different
if you where to compare wifi range once boosted on ipod to dell streak dells range sucks . and i have an ipod i dont let go cuz of it but ipod is just so small
nobody out there knows?
no answer yet now i am worried
You will most likely get no feedback on your request and this version is old now. If there were or are adjustments they will be in the later ROMs.
Sent from my Dell Streak using XDA App
Hello everyone,
I've been looking for a solution for a couple of days now and just can't figure out what i'm doing wrong.
this is my first cLK flash and everything went without any problems, wiped everything, partioned SD-card, flashed ROM. - and everything looked great but i did not realize that I didn't have to enter my PIN, and I had no service either, after a reflash, that problem was fixed but WIFI wont turn on, it gets stuck on "activating"
I hope someone can help me, this ROM looks awesome i'd hate not being able to use it.
thank in advance, pi
Problem solved,
finally found a solution by seadersn
"you can use this cLK 1.4.0.1 120-5 layout. btw: 120-44 or any layout with bigger cache is not needed and therefore recommended, due to initrd.gz was designed. it's all located @ /data-partition, so bigger cache = less userdata in any case. " - http://forum.xda-developers.com/showthread.php?p=17326365&highlight=wifi+150+120#post17326365
Thanks
Hello,
I have also problems with Wi-Fi on my HTC HD2. If i press the Wi-Fi button it says enabling but it stucks..
I tried this update but it didn't work..
What to do?
Thanks..
I had the same issue when I installed 3.0.0 + 3.0.1 Hotfix.
With "installed" I mean, i used "install update package from sdcard" in CWM to update from 2.0.1.
abd shell and cat /proc/kmsg showed some problems when loading the driver module for WiFi, when i clicked "turn on WiFi".
My solution was, to update the whole toolchain:
I restarted with a full wipe, updated to cLK 1.4 (before: 1.3.3) and CWM 4.0.0.0 (before: 3.0.something) together with a fresh repartitioning, all via "HD2 Toolkit" (http://forum.xda-developers.com/showthread.php?t=1090783)
I know, it is a bit cumbersome, because you have a fresh install and need to reinstall several apps and so on...
Hello.
This is where you can look at the tutorial and get the files to install if you feel like jumping into it ...
ICS Step by step and files
Note: if you do flash this and it hangs at the boot screen, pull the battery and flash it again and it should work. Some have had to do it 3 times.
I take no credit for this ROM and full props go to the developers of the above post and all those working to make this happen.
First the look and feel of ICS is nothing short of superb. The speed as of now is similar to all the other ROMS I have tried with a little chop here and there but nothing major.
Yes lots of little issues and items that do not work like the camera and GPS but not a huge deal for me so I am willing to stick to it.
Battery so far is decent. 13 hours and 43 min. on the first charge to calibrate and sitting at 24% still. This included allot of playing with the phone and reboots to test jigs
As for the issues that are somewhat bothersome, they include the following.
1. No home or search button. I know same as usual when installing an i9000 ROM but the key mappings from the GB ROMS does not work.
2. BLN (issue all around) will remain lit until you wake the phone to get the notification.
3. They had to do some funky stuff to get 3G to work so it lags to start. Not a huge deal cause it does start and remain working.
I will be continuing to use this ROM and hopefully everything will be working soon (these guys are flying. Also I have been told that the folks over at Glitch are already working on the kernels for the ICS port so that is promising as well.
If there are any other out there running this on our phone chime in with your thoughts or fixes if you have any.
Thanx
Bucky
Thanks for starting this thread. Can't wait to hear about your progress.
Alpha 7
Hey here is the update ...
Installed the Alpha 7 update today and I have to say this rom is fantastic.
1. Camera is fixed and works like a charm.
2. GPS locked in seconds and accurate indoors!! Big improvment over all other roms I have used.
3. HW Acceleration is fixed and working from what I can tell
4. You Tube is fixed and can watch video
Still on the not working list
1. Can not plug the phone in while off as it just restarts. this is a work in progress and known issue
2. Can not record video
3. Will not read a SIM card for contacts and so on (thank god for Google sync)
4. Still no home or search buttons (I think I may need to work on that on myself unless a kernel is released)
SO my review so far ...
No real issues with the general use of the phone. Text, phone, email and web are solid, I have installed apps from the market with no issues and not one FC yet. Battery life is good and nothing is taking over. I have been able to use the phone all day and still have lots left over before going to bed and plugging in. I have not been through a full battery as of yet but that is what I am working on now.
Memory - Last I looked I had 174MB of memory remaining which is the highest I have seen.
ICS is really smooth and fast while moving around. I am going to continue to play with it and report back here for everyone.
I don't use a whole lot of apps so there won't be much regarding those.
Thanx for stopping by and I will post pics when I can.
Bucky
Nevermind
Sent from my SCH-I500 using XDA App
Thanks for the update. From your review, it sounds like an awesome rom. Can't wait to try it but need them to fix the video recording first. Although I might just cave and try it out just to see what the fuss is all about
Can always restore my current setup... lol.
Update ...
been getting the SOD today and not sure why, I mentioned above that the HW acceleration was working, I misunderstood and it is not fully working yet.
I found that the system partition is very small. There was an update which required copying libs and there was not enough space left to do this (2MB). Not too sure if this is due to coming from MIUI or just a ROM issue.
Alpha 8 was released but had quite a few issues so not flashing that one.
Daily use has been great so far (except for the SOD) with no reception or data issues.
I am still working on the home and search buttons but I think that will get fixed with a kernel update. I tried the keymap file but these buttons do not even register in recovery so I get nothing in the ROM either.
More to come ...
Haven't tried this (likely won't as I need the phone for work) but buck have you tried the manual key fix - some directions in our thread on putting on Darkys 10.3.
Sent from T959D running Miui
Yup been there done that no go
Sent from my GT-I9000 using XDA App
Hey buck , was doing some searching in teamhacksung's thread about their ICS port, and someone suggested to change the following and then the key mapping for our phones will work properly. Not sure if the file system is the same for both, but definitely a bit of info if it isn't!
All you have to do is change this part on**arch/arm/mach-s5pv210/mach-aries.c*
*Original**(line 1216~1221)
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*0,*
*0*
----------------------------------------------------------------------------*
*Edited*
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*KEY_HOME,*
*KEY_SEARCH*
Sent from my GT-I9000 (T959 mod) using XDA App
Thank for the input. After flashing bata 1 all the buttons are working. More to come: )
Sent from my GT-I9000 using XDA App
Hey, have a telus fascinate too. Know how to flash and all that fun stuff. Just don't fully follow where you make the changes for key mapping...if you could just guide me in the right direction, I can figure the rest out...
changes in the kernel zip? the beta zip? after flashing? something completely different?
thanks a lot!
There are no changes to be made with this ROM, they are built in. Just flash and all good.
I will post update tonight after work.
Sent from my GT-I9000 using XDA App
yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream
havoksupertwit said:
yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream
Click to expand...
Click to collapse
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
bucknetbucky said:
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
Calibrated my phone this morning. Heavy use today configuring everything but about 52% now (sooo 5 hours or use?)
Why god! Whhyyy!!
bucknetbucky said:
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.
iwebsource said:
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.
Click to expand...
Click to collapse
OK so here is what I did ...
Started from MIUI 1.11.18
1. Do a nandroid backup
2. download all the files to the SD card. This includes the ROM, Kernel and super user fix
Links:
Kernel:http://ice-cream-sandwich-sgs.googlecode.com/files/FuguModICS_GT-I9000_update.zip
ROM:http://ice-cream-sandwich-sgs.googlecode.com/files/ICS_4.0.1_r1-Beta1-i9000.zip
Super User:http://ice-cream-sandwich-sgs.googlecode.com/files/Superuser-3.0.6-efgh-signed.zip
3. Boot to recovery and do factory reset, wipe cache and davlik cache
4. Install the Kernel first and reboot now
5. Boot into recovery factory reset and wipe cache and Davlik and Install the ROM then reboot now
6 Boot back to recovery and install the Kernel again with out the wipe
7. If after reboot you do not have root then boot to recovery and flash super user fix
8. reboot and it should be working at least it was for me
It seems to me that you are missing the first flash of the kernel before the ROM. It sets up the file system from what I gather
Note: If needed flash the kernel and rom then kernel again with all the wipes as mentioned above.
I know there are allot of folks having issues getting it to run. Not too sure if it was the way I installed MIUI that might have made the difference.
My battery is charging now so I can calibrate it and see how it goes after that (it drained pretty quick today) lol.
I hope you can get it going cause it truly is awesome
Still not working:
Can not charge with the phone off
Google TTS stops working
Phone will not vibrate for SMS or email when in silent mode
BLN stays on for notifications until the phone is taken out of sleep (can be turned off)
Compass is why off (have not attempted to calibrate yet though)
11 MB left in the system partition (not much but I do not think there will be many changes there)
Video play back is choppy and some will not play
Bucky
regarding the black screen:
- had that too... I let it sit on the black screen for 2-3 minutes and then it went to the boot screen animation (a multi-coloured )...that for a few minutes...then finally booted.
How i got it working:
a) Started on MIUI...booted into clockwork
b) Backup
c) Wipe data / factory reset and cache and dalvik cache
d) Install rom and then kernel
e) Restart
f) Install rom and then kernel
g) Restart and wait very patiently for a little while
h) Once it all works, can reboot into clockwork and install superuser
Good luck! I really think the rom is nearly stable enough for daily use...
-------
Also have the no vibrate on silent... haven't tried the other stuff yet.
Oh and TTS hasn't crashed on this version yet for me...
Astrid glitches a little to a lot.
Changing from google tts to picco tts solves the problem there. As for the other stuff it is all reported as known.
I am using as a daily on my phone and no issues with general use. Still testing battery and that seems to be a bit of an issue with regard to Android OS as usual
Sent from my GT-I9000 using XDA App
So to install this ROM I would just have to install it as per totallydubbed's instructions? I don't want to flash miui if I don't have to to try this out.
Sent from my GT-I9000 (T959 mod) using XDA App
Hi,
I am using hyperdroid ROM for a long time now with many versions. With some installations, I have issus with my mobile Data connection. When I enter my home, it connects correctly to my wifi but when I am leaving again and the phone looses my wifi connection, it usually doesnt reconnect for mobile data. I also cannot solve this problem by switching to airplanemode. The only possibility is, to restart the device - till I leave home next time...
With a few installations of Hyperdroid Rom, i havent had this issue at all but for now, it persists.
Do you have any clue und that?
Thanks,
cmoe
e ro in the end i went and used anther rom im not a fan off ics tbh
samuel79 said:
e ro in the end i went and used anther rom im not a fan off ics tbh
Click to expand...
Click to collapse
Sorry I don't understand what you are writing. The only thing I understand is that you don't wanna use ICS roms... Hyperdroid is a GB CM7 Rom... no ICS
Have you wiped data/cache before flashing?
Sent from my NexusHD2 using XDA
yes, i allway wipe data/factory reset, wipe cache, wipe dalvik
EDIT: But if i unfurtunately didnt this time... is there a way to fix it without a complete reinstall?
i think it's better to check with another rom version.
then check your problem.
Hm, Think I'll wait then till next version of ROM as after each install, I do my special personal tweakings (removing apps like launcher from system-partition and replacing with launcher and apps I need) and I don't have time at the moment to do so with a clean install =D
Last few days I tried to use custom ROM. Volte doesn't work. I've given up on that issue now. Now problem is Miui pro.
After flashing it keeps showing boot logo ( I waited for more than 30 minutes) but the older version (7... Something) flashes without any problem.
How long should I wait to complete it's booting process( more than an hour??!!!!!)
P.s- device encryption is enabled [ but I don't think it's causing the problem cuz older version is doing fine]
http://miuiid.blogspot.in/p/rom.html?m=1
Download this and flash like normal rom.
First clear data, dv-cache, system,
Then flash this along with magisk
After flash don't clear dv-cache, not even after flashing magisk and dont change anythink in the system partition untill first boot u can also flash the magisk modules straight ahead.
This is miui id best, u get paid themes free, also volte working and it does have split screen.
Note:- don't forget to flash magisk, don't clear cache after flashing the rom and i mean anytime don't do it it will take a lot of time then.
First boot will take 15 min, dont wait for it once it gets past the boot logo and enters the bootanimation wait for 2 min then again do force reboot by long pressing the power button, do it one more time this time wait for 5 min if it opens then good or again reboot. This time it will happen.
The rom is stable and totally worth the trouble.
This process is just to reduce the first booting time.
Thanks ?
Also check this post for more information.
Link:- https://forum.xda-developers.com/xi...t/arvanasoft-miui-9-7-10-20-redmi-3s-t3694036
Thanks.
Im running Miui 9.2 global stable 9.2.2.0
Can i do dirty install? I dont wanna lose apps data
Im using stock miui global stable 9.2.2. Android 6.0
If i wanna install miui id, do i need to wipe all , as in format my handset. Or is it ok to just wipe system, cache dv? I dont wanna lose my apps data
@Trovies hi,
Just do titanium or swiftbackup search the apk in google, and u can do dirty flash but i will not recommend it.
Note :- download the premium version of the swiftbackup from the internet.
Thanks
Flash lazyflasher.zip
Sagar_zac said:
http://miuiid.blogspot.in/p/rom.html?m=1
Download this and flash like normal rom.
First clear data, dv-cache, system,
Then flash this along with magisk
After flash don't clear dv-cache, not even after flashing magisk and dont change anythink in the system partition untill first boot u can also flash the magisk modules straight ahead.
This is miui id best, u get paid themes free, also volte working and it does have split screen.
Note:- don't forget to flash magisk, don't clear cache after flashing the rom and i mean anytime don't do it it will take a lot of time then.
First boot will take 15 min, dont wait for it once it gets past the boot logo and enters the bootanimation wait for 2 min then again do force reboot by long pressing the power button, do it one more time this time wait for 5 min if it opens then good or again reboot. This time it will happen.
The rom is stable and totally worth the trouble.
This process is just to reduce the first booting time.
Thanks
Click to expand...
Click to collapse
very well explained. As per habit I was clearing both dv cache and cache and due to this rom was taking too much time to boot. But after reading your post I have made clear pretty much everything. This is the best MIUI rom I have ever used. Performance, battery life, smoothness everything is spot on. I just wish it would had double tap to wake feature and recent apps menu would had icon mode option. Audio through earphones is also low. other than that its fantastic rom.
https://forum.xda-developers.com/xi...t/arvanasoft-miui-9-7-10-20-redmi-3s-t3694036
Vinayakn73 said:
very well explained. As per habit I was clearing both dv cache and cache and due to this rom was taking too much time to boot. But after reading your post I have made clear pretty much everything. This is the best MIUI rom I have ever used. Performance, battery life, smoothness everything is spot on. I just wish it would had double tap to wake feature and recent apps menu would had icon mode option. Audio through earphones is also low. other than that its fantastic rom.
https://forum.xda-developers.com/xi...t/arvanasoft-miui-9-7-10-20-redmi-3s-t3694036
Click to expand...
Click to collapse
Well u don't get everything but the things you mentioned i don't use it. So... Good for me right. ?For the audio problem use Dolby from the magisk repo the lenovo A7000 one the others don't work. Just flash the settings zip after flashing the rom and don't clear cache
Sagar_zac said:
Well u don't get everything but the things you mentioned i don't use it. So... Good for me right. For the audio problem use Dolby from the magisk repo the lenovo A7000 one the others don't work. Just flash the settings zip after flashing the rom and don't clear cache
Click to expand...
Click to collapse
well I'm using viper4android but with it audio quality increased but volume decreased further, I think I can live up with it. After flashing settings zip I did everything as you mentioned (did not clear dvk cache or cache) but now rom is stuck on mi logo (almost 20 to 25 minutes) can I dirty flash rom again???? Or do I need to do clean install??
Vinayakn73 said:
well I'm using viper4android but with it audio quality increased but volume decreased further, I think I can live up with it. After flashing settings zip I did everything as you mentioned (did not clear dvk cache or cache) but now rom is stuck on mi logo (almost 20 to 25 minutes) can I dirty flash rom again???? Or do I need to do clean install??
Click to expand...
Click to collapse
Just do a clean flash, rom + settings zip, together like do a batch. Then no clear cache boot and do the process
Sagar_zac said:
Just do a clean flash, rom + settings zip, together like do a batch. Then no clear cache boot and do the process
Click to expand...
Click to collapse
yup I'm not noob and doing exactly as you are saying but still I'm struggling with this rom
1st attempt wipe dalvik, system, data cache - flashed rom - flashed settings zip - flashed magisk - tried to flash magisk modules (failed) - reboot without any wipe - rom didn't boot
2nd attempt - clean installed with only rom and settings zip - booted normally - went to bootloader again installed magisk - reboot system - went in bootloader again - flashed app systemizer module- rebooted successfully - went to magisk manager and added module youtube advanced - reboot stuck on mi logo
3rd attempt - reinstalled clean as described in 2nd attempt till the setup of app sytemizer on reboot - went to app systemizer module and ticked gps app- module asked to reboot boooooom stuck on mi logo
Everything I wrote above is my common practice with every miui rom but I don't know why It is not working with this rom. anyways thanks for your help I am moving to global stable as I can't live without these modules. n sorry for bad english
Vinayakn73 said:
yup I'm not noob and doing exactly as you are saying but still I'm struggling with this rom
1st attempt wipe dalvik, system, data cache - flashed rom - flashed settings zip - flashed magisk - tried to flash magisk modules (failed) - reboot without any wipe - rom didn't boot
2nd attempt - clean installed with only rom and settings zip - booted normally - went to bootloader again installed magisk - reboot system - went in bootloader again - flashed app systemizer module- rebooted successfully - went to magisk manager and added module youtube advanced - reboot stuck on mi logo
3rd attempt - reinstalled clean as described in 2nd attempt till the setup of app sytemizer on reboot - went to app systemizer module and ticked gps app- module asked to reboot boooooom stuck on mi logo
Everything I wrote above is my common practice with every miui rom but I don't know why It is not working with this rom. anyways thanks for your help I am moving to global stable as I can't live without these modules. n sorry for bad english
Click to expand...
Click to collapse
Ya i know modules can be a pain in the ass only one suggestion when ever after flashing a module if its stuck in the bootloop then just use magisk Uninstaller then again install Magisk or use magisk for recovery to remove the particular module which is causing boot loop also use root youtube valence and use universal installer it will not cause bootloop. Also use minimal module only what you need. Ok then. Also do as u discreet i am fine in this rom. And its great. ?
See my modules
I too use YouTube vanced.
Man u got to find solutions not give up and change only after a few attempts. U know how many times i got bootloop because of this rom and it's compatibility issues with the modules. After many attempts i got it. Now its the best custom miui rom ever also the dev is constant and hops to bring miui 10. Also if u have used this rom only for a few hours u can realize the difference.
Sagar_zac said:
I too use YouTube vanced.
Man u got to find solutions not give up and change only after a few attempts. U know how many times i got bootloop because of this rom and it's compatibility issues with the modules. After many attempts i got it. Now its the best custom miui rom ever also the dev is constant and hops to bring miui 10. Also if u have used this rom only for a few hours u can realize the difference.
Click to expand...
Click to collapse
yup there is no doubt this is best custom miui rom out there. But this bootloop and boot time driving me nuts. I wonder why all this problems are popping up though the rom is based on official firmware and I've never faced such problem with official roms. I will give it a try again after two days. I just hope that time it will go smooth.