Database Users

[TELUS T959D Fascinate]-Running ONECOSMIC'S ICS

Hello.
This is where you can look at the tutorial and get the files to install if you feel like jumping into it ...
ICS Step by step and files
Note: if you do flash this and it hangs at the boot screen, pull the battery and flash it again and it should work. Some have had to do it 3 times.
I take no credit for this ROM and full props go to the developers of the above post and all those working to make this happen.
First the look and feel of ICS is nothing short of superb. The speed as of now is similar to all the other ROMS I have tried with a little chop here and there but nothing major.
Yes lots of little issues and items that do not work like the camera and GPS but not a huge deal for me so I am willing to stick to it.
Battery so far is decent. 13 hours and 43 min. on the first charge to calibrate and sitting at 24% still. This included allot of playing with the phone and reboots to test jigs
As for the issues that are somewhat bothersome, they include the following.
1. No home or search button. I know same as usual when installing an i9000 ROM but the key mappings from the GB ROMS does not work.
2. BLN (issue all around) will remain lit until you wake the phone to get the notification.
3. They had to do some funky stuff to get 3G to work so it lags to start. Not a huge deal cause it does start and remain working.
I will be continuing to use this ROM and hopefully everything will be working soon (these guys are flying. Also I have been told that the folks over at Glitch are already working on the kernels for the ICS port so that is promising as well.
If there are any other out there running this on our phone chime in with your thoughts or fixes if you have any.
Thanx
Bucky

Thanks for starting this thread. Can't wait to hear about your progress.

Alpha 7
Hey here is the update ...
Installed the Alpha 7 update today and I have to say this rom is fantastic.
1. Camera is fixed and works like a charm.
2. GPS locked in seconds and accurate indoors!! Big improvment over all other roms I have used.
3. HW Acceleration is fixed and working from what I can tell
4. You Tube is fixed and can watch video
Still on the not working list
1. Can not plug the phone in while off as it just restarts. this is a work in progress and known issue
2. Can not record video
3. Will not read a SIM card for contacts and so on (thank god for Google sync)
4. Still no home or search buttons (I think I may need to work on that on myself unless a kernel is released)
SO my review so far ...
No real issues with the general use of the phone. Text, phone, email and web are solid, I have installed apps from the market with no issues and not one FC yet. Battery life is good and nothing is taking over. I have been able to use the phone all day and still have lots left over before going to bed and plugging in. I have not been through a full battery as of yet but that is what I am working on now.
Memory - Last I looked I had 174MB of memory remaining which is the highest I have seen.
ICS is really smooth and fast while moving around. I am going to continue to play with it and report back here for everyone.
I don't use a whole lot of apps so there won't be much regarding those.
Thanx for stopping by and I will post pics when I can.
Bucky

Nevermind
Sent from my SCH-I500 using XDA App

Thanks for the update. From your review, it sounds like an awesome rom. Can't wait to try it but need them to fix the video recording first. Although I might just cave and try it out just to see what the fuss is all about
Can always restore my current setup... lol.

Update ...
been getting the SOD today and not sure why, I mentioned above that the HW acceleration was working, I misunderstood and it is not fully working yet.
I found that the system partition is very small. There was an update which required copying libs and there was not enough space left to do this (2MB). Not too sure if this is due to coming from MIUI or just a ROM issue.
Alpha 8 was released but had quite a few issues so not flashing that one.
Daily use has been great so far (except for the SOD) with no reception or data issues.
I am still working on the home and search buttons but I think that will get fixed with a kernel update. I tried the keymap file but these buttons do not even register in recovery so I get nothing in the ROM either.
More to come ...

Haven't tried this (likely won't as I need the phone for work) but buck have you tried the manual key fix - some directions in our thread on putting on Darkys 10.3.
Sent from T959D running Miui

Yup been there done that no go
Sent from my GT-I9000 using XDA App

Hey buck , was doing some searching in teamhacksung's thread about their ICS port, and someone suggested to change the following and then the key mapping for our phones will work properly. Not sure if the file system is the same for both, but definitely a bit of info if it isn't!
All you have to do is change this part on**arch/arm/mach-s5pv210/mach-aries.c*
*Original**(line 1216~1221)
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*0,*
*0*
----------------------------------------------------------------------------*
*Edited*
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*KEY_HOME,*
*KEY_SEARCH*
Sent from my GT-I9000 (T959 mod) using XDA App

Thank for the input. After flashing bata 1 all the buttons are working. More to come: )
Sent from my GT-I9000 using XDA App

Hey, have a telus fascinate too. Know how to flash and all that fun stuff. Just don't fully follow where you make the changes for key mapping...if you could just guide me in the right direction, I can figure the rest out...
changes in the kernel zip? the beta zip? after flashing? something completely different?
thanks a lot!

There are no changes to be made with this ROM, they are built in. Just flash and all good.
I will post update tonight after work.
Sent from my GT-I9000 using XDA App

yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream

havoksupertwit said:
yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream
Click to expand...
Click to collapse
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.

bucknetbucky said:
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
Calibrated my phone this morning. Heavy use today configuring everything but about 52% now (sooo 5 hours or use?)

Why god! Whhyyy!!
bucknetbucky said:
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.

iwebsource said:
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.
Click to expand...
Click to collapse
OK so here is what I did ...
Started from MIUI 1.11.18
1. Do a nandroid backup
2. download all the files to the SD card. This includes the ROM, Kernel and super user fix
Links:
Kernel:http://ice-cream-sandwich-sgs.googlecode.com/files/FuguModICS_GT-I9000_update.zip
ROM:http://ice-cream-sandwich-sgs.googlecode.com/files/ICS_4.0.1_r1-Beta1-i9000.zip
Super User:http://ice-cream-sandwich-sgs.googlecode.com/files/Superuser-3.0.6-efgh-signed.zip
3. Boot to recovery and do factory reset, wipe cache and davlik cache
4. Install the Kernel first and reboot now
5. Boot into recovery factory reset and wipe cache and Davlik and Install the ROM then reboot now
6 Boot back to recovery and install the Kernel again with out the wipe
7. If after reboot you do not have root then boot to recovery and flash super user fix
8. reboot and it should be working at least it was for me
It seems to me that you are missing the first flash of the kernel before the ROM. It sets up the file system from what I gather
Note: If needed flash the kernel and rom then kernel again with all the wipes as mentioned above.
I know there are allot of folks having issues getting it to run. Not too sure if it was the way I installed MIUI that might have made the difference.
My battery is charging now so I can calibrate it and see how it goes after that (it drained pretty quick today) lol.
I hope you can get it going cause it truly is awesome
Still not working:
Can not charge with the phone off
Google TTS stops working
Phone will not vibrate for SMS or email when in silent mode
BLN stays on for notifications until the phone is taken out of sleep (can be turned off)
Compass is why off (have not attempted to calibrate yet though)
11 MB left in the system partition (not much but I do not think there will be many changes there)
Video play back is choppy and some will not play
Bucky

regarding the black screen:
- had that too... I let it sit on the black screen for 2-3 minutes and then it went to the boot screen animation (a multi-coloured )...that for a few minutes...then finally booted.
How i got it working:
a) Started on MIUI...booted into clockwork
b) Backup
c) Wipe data / factory reset and cache and dalvik cache
d) Install rom and then kernel
e) Restart
f) Install rom and then kernel
g) Restart and wait very patiently for a little while
h) Once it all works, can reboot into clockwork and install superuser
Good luck! I really think the rom is nearly stable enough for daily use...
-------
Also have the no vibrate on silent... haven't tried the other stuff yet.
Oh and TTS hasn't crashed on this version yet for me...
Astrid glitches a little to a lot.

Changing from google tts to picco tts solves the problem there. As for the other stuff it is all reported as known.
I am using as a daily on my phone and no issues with general use. Still testing battery and that seems to be a bit of an issue with regard to Android OS as usual
Sent from my GT-I9000 using XDA App

So to install this ROM I would just have to install it as per totallydubbed's instructions? I don't want to flash miui if I don't have to to try this out.
Sent from my GT-I9000 (T959 mod) using XDA App

Marshmallow ROMs freeze and crash = Hardware Problem?

Hello everyone!
I have been experiencing a strange issue with almost all the Marshmallow ROMs currently in the development section. The Phone boots, Setup Wizard runs, and in between, the screen freezes/hangs and after 5-10 seconds the phone reboots. Again the setup wizard runs and even if i'm able to complete the wizard, the phone frequently hangs and then reboots.
I had been running Paranoid Android 5.1 ROM before flashing the Marshmallow ROM and this strange issue suddenly started. I have tried to flash stock rom and then flash twrp, then flash the ROM, even wiped everything several times. Still the same issue persists. This is really getting annoying as i have tried 3-4 different ROMs and 2 GApps and still the screen freezes and then phone reboots.
And this happens only on Marshmallow ROMs as i again have currently installed Chroma 5.1.1 ROM and its running smoothly. I am beginning to think of it to be a hardware issue. Can anyone help me solve this?

imrock0 said:
Hello everyone!
I have been experiencing a strange issue with almost all the Marshmallow ROMs currently in the development section. The Phone boots, Setup Wizard runs, and in between, the screen freezes/hangs and after 5-10 seconds the phone reboots. Again the setup wizard runs and even if i'm able to complete the wizard, the phone frequently hangs and then reboots.
I had been running Paranoid Android 5.1 ROM before flashing the Marshmallow ROM and this strange issue suddenly started. I have tried to flash stock rom and then flash twrp, then flash the ROM, even wiped everything several times. Still the same issue persists. This is really getting annoying as i have tried 3-4 different ROMs and 2 GApps and still the screen freezes and then phone reboots.
And this happens only on Marshmallow ROMs as i again have currently installed Chroma 5.1.1 ROM and its running smoothly. I am beginning to think of it to be a hardware issue. Can anyone help me solve this?
Click to expand...
Click to collapse
Flash Frank ROM, Flash Tuxi Gapps from Frank's OP, no one is having any issues now. Also don't forget to do a factory reset if you can even the Internal data.

sidnoit22 said:
Flash Frank ROM, Flash Tuxi Gapps from Frank's OP, no one is having any issues now. Also don't forget to do a factory reset if you can even the Internal data.
Click to expand...
Click to collapse
I have done factory reset several times. Even flashed stock via fastboot multiple times. Done the exact same steps you mentioned. Its not only with Frank ROM actually, i tried another Marshmallow ROM and the same thing happened again.
How is it that Lollipop ROMs are running smooth and Marshmallow ROMs are crashing?

imrock0 said:
I have done factory reset several times. Even flashed stock via fastboot multiple times. Done the exact same steps you mentioned. Its not only with Frank ROM actually, i tried another Marshmallow ROM and the same thing happened again.
How is it that Lollipop ROMs are running smooth and Marshmallow ROMs are crashing?
Click to expand...
Click to collapse
seems like it's Gapps/ ROM problem (with setup wizard)
this my only suggestions:
1. try to flash Frank's M without Gapps > reboot normaly
if this worked, then it's related to Gapps issue...
if it still remains, then
2. Flash ROM, Gapps, wipe, etc.
after that back to home of TWRP > Mount > Mount system > back > Advanced > File manager > go to /system/priv-app
search for folder name related to Setup wizard/ Google setup wizard (NOT GooglePartnerSetup) > delete it > reboot
3. fingercrossed it will bring you to home screen without any problem...
good luck then :fingers-crossed:

yayakuya said:
seems like it's Gapps/ ROM problem (with setup wizard)
this my only suggestions:
1. try to flash Frank's M without Gapps > reboot normaly
if this worked, then it's related to Gapps issue...
if it still remains, then
2. Flash ROM, Gapps, wipe, etc.
after that back to home of TWRP > Mount > Mount system > back > Advanced > File manager > go to /system/priv-app
search for folder name related to Setup wizard/ Google setup wizard (NOT GooglePartnerSetup) > delete it > reboot
3. fingercrossed it will bring you to home screen without any problem...
good luck then :fingers-crossed:
Click to expand...
Click to collapse
Thanks i'll try this out when i get back home. Although i did try flashing just the ROM to see if GApps were causing the issue. Without GApps, the phone booted to the homescreen, but then after 5-10 mins would reboot itself. I don't know may be it has got something to do with temperature? Because i've noticed that the phone becomes very hot when it first boots up on a new ROM(i know its normal for it to get hot). But when i used the phone on a Marshmallow ROM when the phone was NOT hot, it went on pretty well for 20-30 mins and then again rebooted.

yayakuya said:
seems like it's Gapps/ ROM problem (with setup wizard)
this my only suggestions:
1. try to flash Frank's M without Gapps > reboot normaly
if this worked, then it's related to Gapps issue...
if it still remains, then
2. Flash ROM, Gapps, wipe, etc.
after that back to home of TWRP > Mount > Mount system > back > Advanced > File manager > go to /system/priv-app
search for folder name related to Setup wizard/ Google setup wizard (NOT GooglePartnerSetup) > delete it > reboot
3. fingercrossed it will bring you to home screen without any problem...
good luck then :fingers-crossed:
Click to expand...
Click to collapse
Here's another update. I tried the new Chroma Marshmallow ROM and it too had the same issue. The phone hangs/freezes randomly and then reboots. After trying so many ROMs, i think the issue is with hardware itself. None other has reported this issue, nor could i find it anywhere else. I guess i can say that my(and only my) nexus 4 is not compatible with Marshmallow officially and unofficially.

I don't know what kernel Frank's uses but you could always try to flash an alternate kernel. I haven't taken the jump to Marshmallow yet, but it seems TaUrUs and hellsCore support M (I currently use hellsCore with stock L).

bjb2 said:
I don't know what kernel Frank's uses but you could always try to flash an alternate kernel. I haven't taken the jump to Marshmallow yet, but it seems TaUrUs and hellsCore support M (I currently use hellsCore with stock L).
Click to expand...
Click to collapse
I'll try another kernel and ping back.

Probably lacked boot the system before you install GApps.

imrock0 said:
I'll try another kernel and ping back.
Click to expand...
Click to collapse
The FC of Setup Wizard is discussed in the ROM thread of Chroma.
You can try this because it is advised by the Dev of Chroma and supported by many others and I have succeeded with this.
Flash stock L and boot up.
Boot into TWRP (make sure you have the latest) and factory reset.
Flash Chroma 1/11/2015 and Bank's Gapps without boot/reboot in between and no wipe afterwards.
Reboot.
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
webg3brasil said:
Probably lacked boot the system before you install GApps.
Click to expand...
Click to collapse
At least for Chroma, that is a wrong approach. No boot between ROM and Gapps flash.

Make sure you have permissions granted to all of the apps. I had similar issues, and had to do with Location and apps making calls to GPS. Would cause a reboot, and not just a force close. Try amending the Location settings as well. All else fails, capture a logcat.

Everyone thanks for your time!
I found the solution. bjb2's suggestion did the trick. I flashed TaUrUs-Mallow Kernel after Frank Marshmallow ROM and everything seems fine now. Have been running Marshmallow since a day without any issues. Still it's curious why the stock kernel gave such errors.
Thanks everyone again for your suggestions and help

Q&A, Help & Troubleshooting for Resurrection Remix 5.5.9 by quanganh2627

This is a Dedicated Q&A thread for Resurrection Remix Rom by quanganh2627. Please post all your Questions & all issues related with RR Rom. Any Dev or other Friends here will try to solve your issues.
Please don't tag quanganh2627 for every small issue or bug. He has lots of work to do. Don't ask for any ETA's or Update's because when ever there is one, quanganh2627 will will let us know. Kindly post all your issues here without tagging dev's.
ROM & INSTALLATION : forum.xda-developers.com/zenfone-5/development/resurrection-remix-zenfone-5-t3185403
you can use Unlocking Tool from above
Or
Unlocking Bootloader & install TWRP (Auto-installer): Install-twrp-stable-on-zenfone-5 " NOT PROMOTING ANYTHING " I found it working Efficiently

--RESERVED---

Issues :
1. Random lock when use mobile radio except 3G (sometimes i have to travel to poor signal and just got Edge)
2. After reboot the network type is WCDMA prefered, i have to set to everytime i restrart the phone on *#*#4636#*#* to lock on 3G signal
3.How to save photo on External Memory on Asus Pixel Master Camera
4.How to update Asus Keyboard ? ( on google play say asus keyboard not compatible wth the phone
5,network activity on status bar is default to NO everytime restrart the phone
BTW this is some issues i found,im using kernel beta 7.0 7.2 and Exposed V75
thanks Before

kuranzi said:
Issues :
1. Random lock when use mobile radio except 3G (sometimes i have to travel to poor signal and just got Edge)
2. After reboot the network type is WCDMA prefered, i have to set to everytime i restrart the phone on *#*#4636#*#* to lock on 3G signal
3.How to save photo on External Memory on Asus Pixel Master Camera
4.How to update Asus Keyboard ? ( on google play say asus keyboard not compatible wth the phone
5,network activity on status bar is default to NO everytime restrart the phone
BTW this is some issues i found,im using kernel beta 7.0 7.2 and Exposed V75
thanks Before
Click to expand...
Click to collapse
1. I Face random screen lock very rarely.
2. Select 3g from sim cards > sim settings.
3. Photo can't be saved to extcard as of now.
4. Place the updated apk in /system/priv-app/asuskeyboard folder, set permission to rw r r or 06 4 4 & reboot device.
5. Clear cache & dalvik cache or upgrade to 7.1.

Hey, is there anybody facing phone waking up in your pocket?

Unlocking Bootloader & install TWRP (Auto-installer): Install-twrp-stable-on-zenfone-5 " NOT PROMOTING ANYTHING " I found it working Efficiently[/QUOTE]
Open gapps works with above twrp?

FaizK said:
Unlocking Bootloader & install TWRP (Auto-installer): Install-twrp-stable-on-zenfone-5 " NOT PROMOTING ANYTHING " I found it working Efficiently
Click to expand...
Click to collapse
Open gapps works with above twrp?[/QUOTE]
Haven't tested with this twrp.....i flashed it from quang's twrp.
Just try it out..! If it fails nothing happens......if its success then you can enjoy your open gapps....

[email protected]!$h said:
Open gapps works with above twrp?
Click to expand...
Click to collapse
Haven't tested with this twrp.....i flashed it from quang's twrp.
Just try it out..! If it fails nothing happens......if its success then you can enjoy your open gapps....[/QUOTE]
As you said it is efficient ,so I thought you might have flashed the ROM and opengapps via above recovery.
I also flashed it via quann's recovery

[email protected]!$h said:
1. I Face random screen lock very rarely.
2. Select 3g from sim cards > sim settings.
3. Photo can't be saved to extcard as of now.
4. Place the updated apk in /system/priv-app/asuskeyboard folder, set permission to rw r r or 06 4 4 & reboot device.
5. Clear cache & dalvik cache or upgrade to 7.1.
Click to expand...
Click to collapse
thks before...
random lock is appear when i have poor signal, and 3g is default change to wcdma prefered after restart

FaizK said:
Haven't tested with this twrp.....i flashed it from quang's twrp.
Just try it out..! If it fails nothing happens......if its success then you can enjoy your open gapps....
As you said it is efficient ,so I thought you might have flashed the ROM and opengapps via above recovery.
I also flashed it via quann's recovery
Click to expand...
Click to collapse
I said i found it working Efficiently for unlocking bootloader..........it unlocks bootloader & installs twrp...

When I try to change music by earphone controls with the screen off, the screen lights up instead of exchanging music. Does anyone know how to fix?
This bug is present in versions 6.7, 6.9, 7.0, 7.1 and 7.2 of the RR

hey guys, i got problem when i've install l_speed_v2.3_revolution also with super su and got bootloop. i've tried to wipe the dalvik and cache, it work for an hour and reboot again by it self.
what can i do to solve this problem.? thanks.

No UI after dirty flashing Beta 7.2 with Kernel Auditor ! The Boot animation and "Upgrade in Progress" dialog did show but Android UI didn't !
I have data in internal storage so I can't wipe it ! Any tips guys ?
I flashed the zips in this order : RR ROM, OLD GAPPS, Xposed v78 and then Wipe Cache.
EDIT : When I press the power button for a few seconds for force shutdown, the power menu pops up for a few milliseconds before the device goes off

adnaanbheda said:
No UI after dirty flashing Beta 7.2 with Kernel Auditor ! The Boot animation and "Upgrade in Progress" dialog did show but Android UI didn't !
I have data in internal storage so I can't wipe it ! Any tips guys ?
I flashed the zips in this order : RR ROM, OLD GAPPS, Xposed v78 and then Wipe Cache.
EDIT : When I press the power button for a few seconds for force shutdown, the power menu pops up for a few milliseconds before the device goes off
Click to expand...
Click to collapse
Try to Connect your device to PC & copy your data......

Fernando0258 said:
When I try to change music by earphone controls with the screen off, the screen lights up instead of exchanging music. Does anyone know how to fix?
This bug is present in versions 6.7, 6.9, 7.0, 7.1 and 7.2 of the RR
Click to expand...
Click to collapse
@tank0412 bro.....do you know how to Fix it?

sorry, now i've back to my kitkat stock rom due my device usually reboot after several minutes in RR 7.2 and want to go to RR again. Do i have to install lollypop first or just straight install RR.? thx

ekinodermata said:
sorry, now i've back to my kitkat stock rom due my device usually reboot after several minutes in RR 7.2 and want to go to RR again. Do i have to install lollypop first or just straight install RR.? thx
Click to expand...
Click to collapse
If u r not facing any screen freeze due to unlocking boot loader........ U can directly upgrade to RR......

[email protected]!$h said:
If u r not facing any screen freeze due to unlocking boot loader........ U can directly upgrade to RR......
Click to expand...
Click to collapse
yeah thx, it works.

adnaanbheda said:
No UI after dirty flashing Beta 7.2 with Kernel Auditor ! The Boot animation and "Upgrade in Progress" dialog did show but Android UI didn't !
I have data in internal storage so I can't wipe it ! Any tips guys ?
I flashed the zips in this order : RR ROM, OLD GAPPS, Xposed v78 and then Wipe Cache.
EDIT : When I press the power button for a few seconds for force shutdown, the power menu pops up for a few milliseconds before the device goes off
Click to expand...
Click to collapse
Maybe it has something todo with Auto Brightness and you set it so Low before you upgrade it to 7.2 because i noticed there's that bug in that version , i suggest to flash Multifunctional Kernel by X AnwarMov but if you want the Stock RR ROM kernel then flash it , fix the auto brightness ( by set the brightness slider to middle or really high and turning the auto off ) and then reflash the RR ROM stock kernel
[email protected]!$h said:
Try to Connect your device to PC & copy your data......
Click to expand...
Click to collapse
You Know , you still able to connect via USB to computer from TWRP Recovery ( Dec Build ) By Quanganh just look for the option ( this will make the proses easier ) , but so far as i remember if you want to backup the internal memory you have to boot normal and plug the USB ( Depend if your device if locked )
Sorry for Late Answering
and as you know this is according to my logic so correct me if i'm wrong

RevanEphys said:
Maybe it has something todo with Auto Brightness and you set it so Low before you upgrade it to 7.2 because i noticed there's that bug in that version , i suggest to flash Multifunctional Kernel by X AnwarMov but if you want the Stock RR ROM kernel then flash it , fix the auto brightness ( by set the brightness slider to middle or really high and turning the auto off ) and then reflash the RR ROM stock kernel
You Know , you still able to connect via USB to computer from TWRP Recovery ( Dec Build ) By Quanganh just look for the option ( this will make the proses easier ) , but so far as i remember if you want to backup the internal memory you have to boot normal and plug the USB ( Depend if your device if locked )
Sorry for Late Answering
and as you know this is according to my logic so correct me if i'm wrong
Click to expand...
Click to collapse
You're right It was due to the auto brightness setting ! I turned it off and everything turned out fine. Anyway, I've switched to a stock based custom ROM for the time being, I'll definitely come back for RR 5.6 !

Random reboots on every rom after H2OS

Hey guys.
I don´t wanted to create a thread about this but after some troubleshooting without a solution i don´t know what to do.
After i installed (i think it happens after that) kingmercians hydrogen os, i doesn´t matter which rom i use (cm13, cm12, aicp, ......) i got random reboots. I did´nt install any new app, tried it with gapps, without gapps.... Sometimes it happened right after the first boot of a new rom, sometimes while i restored via TB (no system apps!). It´s not reproducible for me.
I don´t want to make it factory fresh but i know this could be the last way.
Any suggestions?
Thanks in advance!

Trinaaa said:
Hey guys.
I don´t wanted to create a thread about this but after some troubleshooting without a solution i don´t know what to do.
After i installed (i think it happens after that) kingmercians hydrogen os, i doesn´t matter which rom i use (cm13, cm12, aicp, ......) i got random reboots. I did´nt install any new app, tried it with gapps, without gapps.... Sometimes it happened right after the first boot of a new rom, sometimes while i restored via TB (no system apps!). It´s not reproducible for me.
I don´t want to make it factory fresh but i know this could be the last way.
Any suggestions?
Thanks in advance!
Click to expand...
Click to collapse
Did you wipe before you installed new rom ? , also have to say that cyanogenmods like 12.1 and 13 are still unstable tried all myself too . I suggest you to wipe everything but not internal storage , after you installed those ROM's and gapps did you wipe ? also what gapps are you using ?

chrismomike said:
Did you wipe before you installed new rom ? , also have to say that cyanogenmods like 12.1 and 13 are still unstable tried all myself too . I suggest you to wipe everything but not internal storage , after you installed those ROM's and gapps did you wipe ? also what gapps are you using ?
Click to expand...
Click to collapse
First, thank you for your reply!
Yeah.... Every time i switch between roms i wipe everything, cache, data, dalvik and system. And after gapps, i wipe dalvik and cache.
The strange thing is, the roms i used before without any problems (installed for example razor rom which i still had on my internal memory) causes reboots. That never happens before.

Trinaaa said:
First, thank you for your reply!
Yeah.... Every time i switch between roms i wipe everything, cache, data, dalvik and system. And after gapps, i wipe dalvik and cache.
The strange thing is, the roms i used before without any problems (installed for example razor rom which i still had on my internal memory) causes reboots. That never happens before.
Click to expand...
Click to collapse
I installed H2O by king but didn't had issues I changed it because of the notification system , sometimes it took minutes untill I've got a notification on screen off ,and sometimes I had to open the app to see that I got notifications (apps like Whatsapp , Facebook messenger ), after that I installed cm 12.1 and 13 also , on both had problems on camera and rebooted every single time I opened Camera app and Wifi/Data change didn't always worked , they are still unstable I suggest you to install OxigenOS with boeffa kernel and try some of those profiles there my phone working way better than before http://forum.xda-developers.com/oneplus-2/general/unofficial-boeffla-kernel-profiles-t3289395 , or if you like custom ROM's what gapps are you using ?

chrismomike said:
I installed H2O by king but didn't had issues I changed it because of the notification system , sometimes it took minutes untill I've got a notification on screen off ,and sometimes I had to open the app to see that I got notifications (apps like Whatsapp , Facebook messenger ), after that I installed cm 12.1 and 13 also , on both had problems on camera and rebooted every single time I opened Camera app and Wifi/Data change didn't always worked , they are still unstable I suggest you to install OxigenOS with boeffa kernel and try some of those profiles there my phone working way better than before http://forum.xda-developers.com/oneplus-2/general/unofficial-boeffla-kernel-profiles-t3289395 , or if you like custom ROM's what gapps are you using ?
Click to expand...
Click to collapse
Thanks again for your clarification and suggestion!
I used open gapps mini. Used them on every rom. But yesterday i thought to go with OxySlim and the included Boeffla Kernel and yes, works like a charm! No reboots since 14 hours. Eyerything is like it should right now.

Trinaaa said:
Thanks again for your clarification and suggestion!
I used open gapps mini. Used them on every rom. But yesterday i thought to go with OxySlim and the included Boeffla Kernel and yes, works like a charm! No reboots since 14 hours. Eyerything is like it should right now.
Click to expand...
Click to collapse
Glad to help your welcome :good:

hey, i have random reboots and it always happens when I am in another location that is not my home. I thought that it was related to location and wifi but that is not the case. I clean flash and I accidentally wiped out my internal storage. My phone works now but please help

UNOFFICIAL LineageOS 17.1 "SeLinux enforce mode" (Samsung Galaxy S6 - SM-G920F)

UNOFFICIAL LineageOS 17.1 "SeLinux enforce mode" (Samsung Galaxy S6 - SM-G920F)
Note:================
Tested ==> Samsung S6 (SM-G920F)(Zerofltexx)
========================
LineageOS is an operating system for smartphones, tablet computers, and set-top boxes, based on Android with mostly free and open-source software
All the source code for LineageOS is available in the LineageOS Github Repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
I've built this operating system with select userdebug .
It's unnoficial LineageOS17.1 for Galaxy S6 (ZEROFLTEXX)(SM-G920F).
I strongly recommend to perform a backup of your current rom before installation.
Tested ==> Samsung S6 (SM-G920F)(Zerofltexx)
SeLinux run in enforce mode,
also you can opt to have SeLinux run in permissive mode.
Installation process from stock rom
01. Boot into the download mode.
02. flash TWRP with Odin (comes in AP). The hooks at Auto Reboot and F. Reset Time out.
03. disconnect USB cable after flash, battery out and in again.
04. boot into recovery -> Allow Modifications
05. Advanced Wipe: Dalvik/ART Cache, System, Data, Internal Storage, Cache (lasts a while)
06. install -> select lineage image, then add more zips and gapps, then flash
07. patching system image unconditionally runs through with progress bar
08. Open Gapps are flashed, progress bar runs through
09. when done, tap reboot system, Swipe to install TWRP app (or not, if you don't need it)
10th reboot
11. Lot 17.1 boots. (quite a while ^^)
12. type through the facility
13. ready
Download:
==> tajaribsoft-en.blogspot.com/2020/09/unofficial-lineageos-171-samsung-galaxy.html
Because i'm new , i can't create link

Hi gapps included in ur ROM?
And can I install other boot.img files? I have tried that.
I know it won't work but a question..
Still will download and test..
---------- Post added at 07:25 AM ---------- Previous post was at 06:32 AM ----------
Almost everything works except Volume control while calling the same problem on 17.1 ROMs but everything else works fine I can just adjust volume from my file I'll just patch it with profile text lol thanks.. Very nice work ??????☎?

Yup this is my other account here.
and only on my laptop..
But i managed to get my favourite Kernel to be installed thanks to this beautiful work and kernel i installed is enforced and my ( favourite Kernel )
is pemissive so it depends on kernel and i don`t give a f... nice work man.. Thanks..
I can`t say thank you enough because i have tried other roms to get my thing install`d lol THANK YOU..

Are there any issues with audio on incoming or outgoing calls? Did you manage to get both the front and back cameras working? Most other custom roms have a combination of issues there.
EDIT: I just noticed Johannes did mention a call volume issue

add support 925f zeltexx pls

AnErare said:
Are there any issues with audio on incoming or outgoing calls? Did you manage to get both the front and back cameras working? Most other custom roms have a combination of issues there.
EDIT: I just noticed Johannes did mention a call volume issue
Click to expand...
Click to collapse
It has that same sound software problem.
But I think everything else is working. I try to restore boot from my previous backup it works but (sim not showing).
I try to restore other backup stuff but, of course did not working.
But it amazing i can use other kernel just by restoring from backup
They might be better ways to use other Rom's kernel.
I will use it like that soon without any possibility to have Sim card
I like my kernel lol..
This phone ( I ) use is near death so let end it Battery life with that Kernel I use... Lol
I'll test permissive only file download soon and try to restore boot from backup. And see
Or I should try to install Boot.img from the zip
Edit: It didn't work but first with enforcing SE always boot up no matter what i restore from my backup boot/cache/data/efs. I didn't test other rom enough yet.
And I will test more soon for fun..
Btw.. I got 3 mods installed on my backup so I'm gonna have to test new install's from all rom's and re-test from all over.. Or from start lol..
I want to know you guy's have any mods to make system faster or battery-friendly mods
I have added some text to build.prop and installed 3 mods I think. Maybe not all installs patches:
First for Fullscreen Gesture (Q) from Magisk modules.
Because my ROM is old and I removed some system apps.
And then I install kernel mod from this site. Lol (kTweak) it can be seen from Magisk
And 1 patch from here XDA post few days ago
And my build.prop tweak it looks funny:
ro.min_pointer_dur=0
ro.max_pointer_dur=40
wifi.supplicant_scan_interval=9000000000
windowsmgr.min_events_per_sec=0
windowsmgr.max_events_per_sec=60
debug.sf.nobootanimation=1
logcat.live=disable
ro.media.enc.jpeg.quality=100
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.mot.eri.losalert.delay.delay=1000000000
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
persist.android.strictmode=0
ro.config.nocheckin=1
That it if I didn't forget something
And make Settings less cpu hog or how to say make it CPU friendly lol .
1 more thing I have edited Sound mixer from System files
You can search it on my comments on my other account Johannes Davidsen
On Enezusun's 17.1 Lineage Os Multitarget rom
I couldn't post attachment's so I have to copied text
That all.
Here, there are 3 sections i think : https://forum.xda-developers.com/showpost.php?p=83187603&postcount=310

This ROM has still the sound volume issues, but camera is working here, right?
This one https://github.com/enesuzun2002/lineageos-ota/releases (28. Feb build) has working call volume and also working cameras, right?
The 13. April build of it has sound issues again and fast battery drain?
It's hard to keep track of what's working in each ROM build and what's not.

About Enes ROM
0x0rbit said:
This ROM has still the sound volume issues, but camera is working here, right?
This one https://github.com/enesuzun2002/lineageos-ota/releases (28. Feb build) has working call volume and also working cameras, right?
The 13. April build of it has sound issues again and fast battery drain?
It's hard to keep track of what's working in each ROM build and what's not.
Click to expand...
Click to collapse
Why don`t you test them by yourself sometimes same device have different problem with same rom and it is very confusing..
For me all of them have working camera and all of them have, calling sound software problem that i just fix by editing sound file..
Have a nice day..
And yes cam is working on this new august build,
same on sound problem too
---------- Post added at 08:13 AM ---------- Previous post was at 08:02 AM ----------
AnErare said:
Are there any issues with audio on incoming or outgoing calls? Did you manage to get both the front and back cameras working? Most other custom roms have a combination of issues there.
EDIT: I just noticed Johannes did mention a call volume issue
Click to expand...
Click to collapse
For me cam is working, only problem i so is the same software problem when trying to lowèr volume on calling or say on earpiece i`ll just replace sound file with the file i already have edited but it is very low.
You can test it i have commented on Enesuzun`s rom i think it started on page: 31 or 32 there are 3 comment sections i use for text
Here: https://forum.xda-developers.com/ga...ageos-17-1-t4053959/post83187603#post83187603

good

Nice work. Thanks for that selinux enforcing rom. Unfortuately I cannot enable encryption. After set in security settings the boot in a bootloop.

schlombie said:
Nice work. Thanks for that selinux enforcing rom. Unfortuately I cannot enable encryption. After set in security settings the boot in a bootloop.
Click to expand...
Click to collapse
I have exactly the same problem. And are there any other things to do to make the device even more secure? Some Modules ?

bemek01 said:
I have exactly the same problem. And are there any other things to do to make the device even more secure? Some Modules ?
Click to expand...
Click to collapse
My dirty trick to enable encryption was, I installed e rom for the device. Enabled encryption without a pin direct after the installation.
Than I installed the 17.1rom without format data. Only wipe system, data and the caches. The rom boot up allready encrypted.
I only set a pin and thats it.

hello or a little problem with the download link, just don't have the link, can you try s create a link on mega or google drive ???
to another thing i wanted to say, i am surprised that you are creating a rom for android 10 with the SElinux Enforcing, i wanted it a lot to increase the security, but the problem of this that lead to lose some battery, however i am interested to try this rom on my samsung galaxy s6 SM-920F i just have to understand where the link lol.
in my opinion, however, thanks to the rom with the SElinux Enforcing maybe this rom could become official if you want, and put on the lineage os website, but honestly I don't know how it works, this is just my opinion
I wanted to say another thing, that second it was better to do lineage os 16.1 because it is much more stable for this device, in fact existing official resurrection remix with android 9 that I use that not a bug, or tried official evolution x with android 10 but the problem of the wi fi that turns off and that you can disable it on the lock screen, and this and these 2 are a big problem, and that problem also exists in the lineage os 17.1 of another creator, everything to see if in the future when there will be lineage os 18.1 for this device with android 11 maybe the wi fi and lock screen security will work prevent you from turning off the wi fi from the lock screen
i am using google translator, hope the translation is right

schlombie said:
Than I installed the 17.1rom without format data. Only wipe system, data and the caches.
Click to expand...
Click to collapse
A wipe basically formats a partition, so what exactly do you mean, that you wiped the encryption too?
I'm sure this ROM doesn't support whatever encryption /e/ may support that you're suggesting.
But maybe I've got this all wrong

schlombie said:
My dirty trick to enable encryption was, I installed e rom for the device. Enabled encryption without a pin direct after the installation.
Than I installed the 17.1rom without format data. Only wipe system, data and the caches. The rom boot up allready encrypted.
I only set a pin and thats it.
Click to expand...
Click to collapse
Thanks. It works for me.
I have one problem with this rom. Bluetooth headphones don't work. I can connect to the phone but the conection is unstable and stop working. it something like: connected, not connected , connected, not connected each 10 seconds or so.
Sorry for my English thanks a lot for your attention.

gerardomare said:
Thanks. It works for me.
I have one problem with this rom. Bluetooth headphones don't work. I can connect to the phone but the conection is unstable and stop working. it something like: connected, not connected , connected, not connected each 10 seconds or so.
Sorry for my English thanks a lot for your attention.
Click to expand...
Click to collapse
Someone please can explain to me step by step how do this trick for enable encryption ?
I've tried 6 times and nothing works maybe I'm misleading something.

Hi, i just wanted to ask how you compiled lineageos for the s6. I tried to compile los 17.1 with the files provided by enesuzun and have massive problems with lunch detecting the files. Many are missing and even if i collect all it just acts weird. Since enes provided many working images these file should work to compile, don't they? Do you know any good tutorial? Most of them are only either for official builds or completely new unsupported devices.
Thank you in advance.
Chasbrot

What gapps? opengapps is provided for 10.0 only...
I have LOS 16.0 from enes but wanted to give it a try.
After wiping (system, cache, data) and installing this rom with opengapps 10.0 and magisk zips,
the reboot stucked in boot loop.

szazs89 said:
What gapps? opengapps is provided for 10.0 only...
I have LOS 16.0 from enes but wanted to give it a try.
After wiping (system, cache, data) and installing this rom with opengapps 10.0 and magisk zips,
the reboot stucked in boot loop.
Click to expand...
Click to collapse
For LOS 16, which is Android 9, you have to use the OpenGApps for Version 9. You can download them at the OpenGApps Project Homepage.
Try one step at a time when flashing or try the newest version from enes.

Chasbrot said:
For LOS 16, which is Android 9, you have to use the OpenGApps for Version 9. You can download them at the OpenGApps Project Homepage.
Try one step at a time when flashing or try the newest version from enes.
Click to expand...
Click to collapse
Oh, I mean: what gapps does this ROM (17.1) need? (with opengapps 10.0 I got into bootloop)