LOOK... Fix for DJ_steve 1.7.0 3g, wifi, gps - Streak 5 General

Guys... I fixed my wifi, 3g, and Gps on 1.7.0....
1. back up your rom with nandroid (for safety)
2. go into custom recovery (streakmod or clock work) and wipe your delvik cache (i used streakmod)
3. Wipe your entire cache partition (very important)
4. Wipe all user data and perform reset using custom recovery streakmod or clockwork (not the streak's for now)
5. Let the phone boot up completely and it will force close everything really bad... let it sit for a couple minutes
6. reboot phone into DELL's 4 option recovery menu and select option 1 factory reset
7. after it factory resets using dells recovery reset it will boot up normally
8. go through phone set up as usual and use the ADW launcher NOT the other launcher
9. Configure phone to your liking and voila!!! you should be good
10. If your WIFI doesn't work at this point boot into streakmod or clockwork and wipe your dalvik cache 1 last time and your wifi will come back without a doubt.
11. As god is my witness this worked for me. If you find that it worked for you don't hesitate to hit the thanks button. I hope you have the same luck as me. Thanks
**EDIT** Been running my rom for approx 10 hours now and still no problem.... Also, WHATEVER YOU DO... DON'T USE TITANIUM BACKUP TO RESTORE YOUR APPS... Your apps will just force close... if this happens simply uninstall and reinstall and it will be fixed.

what exactly does this fix? initially when i updated from 1.6, my wifi and 3g were connected but i couldnt browse any sights, i just simply rebooted and everything was fine again

rptw said:
what exactly does this fix? initially when i updated from 1.6, my wifi and 3g were connected but i couldnt browse any sights, i just simply rebooted and everything was fine again
Click to expand...
Click to collapse
A tremendous amount of people are having issues with wifi,gps,data, and notification bars after updating to 1.7.0
This seems to be because they (including me) went from 1.6.1 to 1.7.0 and did one of 2 things... they carried over the perfmod and that is causing problems, and or the update itself is having issues updating.
Doing the steps that I have laid out has fixed 3 dell streaks and I am now running on a 99% stable version of 1.7.0 with perfmod in place which gives me quadrant scores of 2500+

I went from 1.6.1 to 1.7.0 and had wifi/3g/gps issues. I used my own combination of above to fix plus added the following to my build.propc to boost wifi/3g performance:
ro.ril.hsxpa=2
ro.ril.gprsclass=32
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.hsupa.category=5
My phone worked great for a few days then rebooted on its own one evening and started cycle rebooting at the Dell logo. I was able to get into the streakmod util and reflash 1.7.1 and I was up and running again. This time my build.prop was missing the same entries, but performance seems ok.

by any chance, does this fix the fact that wifi doesnt work when i switch from data to wifi and data doesnt work when i switch from wifi to data? i have to reboot everytime i switch connections now

rptw said:
by any chance, does this fix the fact that wifi doesnt work when i switch from data to wifi and data doesnt work when i switch from wifi to data? i have to reboot everytime i switch connections now
Click to expand...
Click to collapse
Yes. I had that same problem and it does fix the issue

Using 2 and 3 might be enough
Hi,
for me a full wipe this is no option. I have so many things customized and I hate to enter all my crendetials and other stuff again. But I don't think this method is needed for everyone. I just did the following:
1. back up your rom with nandroid (for safety)
2. go into custom recovery (streakmod or clock work) and wipe your delvik cache (i used streakmod)
That's all. After the boot my wifi, which made frequent problems worked again like a charm.
I also disagree all those "DON'T USE TITANIUM BACKUP TO RESTORE YOUR APPS" rumours on XDA. From my experience it is actually no problem to restore the APPs. And ONLY the apps, WITHOUT data! After that you can restore selected data for the apps where you customized to much to let it go. For my last full wipe this were only about 25 apps (from 250) where I also restored the data. And it is absolutely necessary for me to restore e.g. the wifi secrets, as I have many of them and I definitely do not want to enter them every time again, because of a full wipe. And the same applies to K-9, gmail, twitter, imo, yaaic ...
KarlchenK

So you edit the build.propc file to boost wifi?
brucealeg i see you edit the entries in the build.propc file in the streak to boost the wifi radio power if you did that does that mean the wifi antenna can be boost to better reception
if dj steve is here you can look in to this this would be awsome cuz that means that we will be able to boost the wifi just like it was possible on the iphone 3/ ipod touch 2 and 3 by just installing wififofum,
But this would be different
if you where to compare wifi range once boosted on ipod to dell streak dells range sucks . and i have an ipod i dont let go cuz of it but ipod is just so small

nobody out there knows?
no answer yet now i am worried

You will most likely get no feedback on your request and this version is old now. If there were or are adjustments they will be in the later ROMs.
Sent from my Dell Streak using XDA App

Related

Gps not working after fr008 update

Hey I updated to this last night and now my Gps won't get a signal. Is this a regular occurance, and how do I fix it?
Sent from my HTC Liberty using XDA App
arnienz said:
Hey I updated to this last night and now my Gps won't get a signal. Is this a regular occurance, and how do I fix it?
Sent from my HTC Liberty using XDA App
Click to expand...
Click to collapse
I have not had any issues with GPS not working on FR008. Did you do a full Wipe Data, Wipe Cache and Wipe Dalvik cache before you flashed?
I wiped the cache, but not a wipe disk.
Turns out the GPS *DOES* work, it just takes much longer to get a connection now. Which is odd :S
arnienz said:
I wiped the cache, but not a wipe disk.
Turns out the GPS *DOES* work, it just takes much longer to get a connection now. Which is odd :S
Click to expand...
Click to collapse
That's how it's supposed to work in a standalone mode. Enable Network Localization if you want faster lock and check with GPS Status app that your phone is acquiring AGPS data.
My phone is still really bad at GPS. It was fine on the stock 2.1 but after updating to Fr008 it sucks. Takes so long to get a connection that I don't even bother with the GPS anymore.
What can i do to fix this?
you can update radio firmware.
In one of my updates of my customized version of FR008, I ended up rendering WiFi unusable. I could tap the WiFi button in settings or on the Android power control to my hearts content but I kept getting an error. The only way to resolve it was to wipe the system, wipe the caches and then install my customized FR008.
Changing the radio I don't believe will work to solve this because I believe the problem was not with the radio itself, but with one of the data files already on the internal memory getting corrupted after flashing the ROM. That said, take great care in flashing the updated radio. Ensure your battery is fully charged before trying it, because a failed flash of the radio could permanently brick the phone.

[q] gps fubar

I uber-jacked up my GPS. When I went to cm7 RC4 I lost the ability to get a gps lock. I've tried installing cm6.1, and the "liberated froyo" ROM. Neither return the gps functionality. It just never gets a lock.
Is there any hope for restoring a working gps? If so, what do I do?
chilimac02 said:
I uber-jacked up my GPS. When I went to cm7 RC4 I lost the ability to get a gps lock. I've tried installing cm6.1, and the "liberated froyo" ROM. Neither return the gps functionality. It just never gets a lock.
Is there any hope for restoring a working gps? If so, what do I do?
Click to expand...
Click to collapse
Try the following:
1. Download cm7 & applicable gapps.
2. Wipe data, cache & dalvik AND format /system
3. Install cm7 & applicable gapps.
4. Boot into cm7.
4a. Test gps, download gps test from market and run it.
If gps still doesn't work:
5. Download cm6.
6. Reboot to clockwork.
7. Nandroid backup.
8. Wipe everything, flash cm6.
9. Boot into cm6.
9a. Test gps, download gps test from market and run it.
10. Reboot into clockwork.
11. Restore the nandroid you made in step 7 without wiping anything.
12. Boot into cm7 and test gps.
I tried the steps for cm7... gps got no sattelites... FYI when I did wipe Dalvik I noticed that nothing really happened. Is that normal? Everything else shows up as steps on the screen, but wiping Dalvik just immediatly went back to the menu.
i've still got clockworkmod 2.5.0.1 - is that the problem?
chilimac02 said:
I tried the steps for cm7... gps got no sattelites... FYI when I did wipe Dalvik I noticed that nothing really happened. Is that normal? Everything else shows up as steps on the screen, but wiping Dalvik just immediatly went back to the menu.
Click to expand...
Click to collapse
Thats normal.
wiping dalvik behavior is what you mean is normal I guess...
Which "gps test" are you speaking of. I tried two and neither gave me any signal... This is looking bad.
when I installed RC-4 and had issues, I tried following what is on post 535 here on this thread:
http://forum.xda-developers.com/showthread.php?t=956223&page=54
is that what caused the meltdown?
chilimac02 said:
I tried the steps for cm7... gps got no sattelites... FYI when I did wipe Dalvik I noticed that nothing really happened. Is that normal? Everything else shows up as steps on the screen, but wiping Dalvik just immediatly went back to the menu.
Click to expand...
Click to collapse
You can't just do the CM7 part, you must follow the steps for going back to CM6.
I understand. Somehow I miscommunicated. I followed steps 1-12 that you gave me, what I'm saying is that after step 4a I had no gps signal showing in the test program. then after step 9a, I still had no gps signal showing on the test.
I hope that was more specific.
BTW thanks for helping
So just to be clear, are you just not able to get a gps signal lock? Or is your gps radio not working at all? When you start up gps test or maps/navigation, is the gps icon showing up in the notification bar?
If the icon is there, but it just keeps flashing and wont lock then check the following:
1: make sure mobile data and/or wifi (connected) is turned on.
2: Then go to Menu>Settings>Locations & Security Settings.
3: Make sure Use Wireless Networks is checked.
4: Run GPS Status (market app)
First, yes the icon appears in the notification bar.
I tried the steps (several times trying gps status). The thing just shows no lat/long. I never get a lock in maps, or any other gps test.
at what point do I proclaim the gps is dead?
I'm calling it dead. Gonna do a factory restore to original Rom/condition. Then take it in as its still under warranty...
chilimac02 said:
I'm calling it dead. Gonna do a factory restore to original Rom/condition. Then take it in as its still under warranty...
Click to expand...
Click to collapse
I would recommend going to #liberatedAria on irc.freenode.net and seeing if anyone has any idea what might be going on. Good luck.
gps revert worked for me.just flashed 35 still having gps issues.so are we doomed to flash a gpslib revert every time now?since this problem hasnt been listed on the bug tracker does that mean the devs dont consider it a problem?
after I went back to the factor default by following this thread:
http://forum.androidcentral.com/htc-aria/65654-how-backup-factory-restore-htc-aria.html
I turned off the device and went to bed. In the morning I started to drive to the ATT store and just for fun turned on GPS. It immediately worked...

[TELUS T959D Fascinate]-Running ONECOSMIC'S ICS

Hello.
This is where you can look at the tutorial and get the files to install if you feel like jumping into it ...
ICS Step by step and files
Note: if you do flash this and it hangs at the boot screen, pull the battery and flash it again and it should work. Some have had to do it 3 times.
I take no credit for this ROM and full props go to the developers of the above post and all those working to make this happen.
First the look and feel of ICS is nothing short of superb. The speed as of now is similar to all the other ROMS I have tried with a little chop here and there but nothing major.
Yes lots of little issues and items that do not work like the camera and GPS but not a huge deal for me so I am willing to stick to it.
Battery so far is decent. 13 hours and 43 min. on the first charge to calibrate and sitting at 24% still. This included allot of playing with the phone and reboots to test jigs
As for the issues that are somewhat bothersome, they include the following.
1. No home or search button. I know same as usual when installing an i9000 ROM but the key mappings from the GB ROMS does not work.
2. BLN (issue all around) will remain lit until you wake the phone to get the notification.
3. They had to do some funky stuff to get 3G to work so it lags to start. Not a huge deal cause it does start and remain working.
I will be continuing to use this ROM and hopefully everything will be working soon (these guys are flying. Also I have been told that the folks over at Glitch are already working on the kernels for the ICS port so that is promising as well.
If there are any other out there running this on our phone chime in with your thoughts or fixes if you have any.
Thanx
Bucky
Thanks for starting this thread. Can't wait to hear about your progress.
Alpha 7
Hey here is the update ...
Installed the Alpha 7 update today and I have to say this rom is fantastic.
1. Camera is fixed and works like a charm.
2. GPS locked in seconds and accurate indoors!! Big improvment over all other roms I have used.
3. HW Acceleration is fixed and working from what I can tell
4. You Tube is fixed and can watch video
Still on the not working list
1. Can not plug the phone in while off as it just restarts. this is a work in progress and known issue
2. Can not record video
3. Will not read a SIM card for contacts and so on (thank god for Google sync)
4. Still no home or search buttons (I think I may need to work on that on myself unless a kernel is released)
SO my review so far ...
No real issues with the general use of the phone. Text, phone, email and web are solid, I have installed apps from the market with no issues and not one FC yet. Battery life is good and nothing is taking over. I have been able to use the phone all day and still have lots left over before going to bed and plugging in. I have not been through a full battery as of yet but that is what I am working on now.
Memory - Last I looked I had 174MB of memory remaining which is the highest I have seen.
ICS is really smooth and fast while moving around. I am going to continue to play with it and report back here for everyone.
I don't use a whole lot of apps so there won't be much regarding those.
Thanx for stopping by and I will post pics when I can.
Bucky
Nevermind
Sent from my SCH-I500 using XDA App
Thanks for the update. From your review, it sounds like an awesome rom. Can't wait to try it but need them to fix the video recording first. Although I might just cave and try it out just to see what the fuss is all about
Can always restore my current setup... lol.
Update ...
been getting the SOD today and not sure why, I mentioned above that the HW acceleration was working, I misunderstood and it is not fully working yet.
I found that the system partition is very small. There was an update which required copying libs and there was not enough space left to do this (2MB). Not too sure if this is due to coming from MIUI or just a ROM issue.
Alpha 8 was released but had quite a few issues so not flashing that one.
Daily use has been great so far (except for the SOD) with no reception or data issues.
I am still working on the home and search buttons but I think that will get fixed with a kernel update. I tried the keymap file but these buttons do not even register in recovery so I get nothing in the ROM either.
More to come ...
Haven't tried this (likely won't as I need the phone for work) but buck have you tried the manual key fix - some directions in our thread on putting on Darkys 10.3.
Sent from T959D running Miui
Yup been there done that no go
Sent from my GT-I9000 using XDA App
Hey buck , was doing some searching in teamhacksung's thread about their ICS port, and someone suggested to change the following and then the key mapping for our phones will work properly. Not sure if the file system is the same for both, but definitely a bit of info if it isn't!
All you have to do is change this part on**arch/arm/mach-s5pv210/mach-aries.c*
*Original**(line 1216~1221)
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*0,*
*0*
----------------------------------------------------------------------------*
*Edited*
static const int touch_keypad_code[] = {
#if defined (CONFIG_SAMSUNG_GALAXYS) || defined (CONFIG_SAMSUNG_GALAXYSB)
KEY_MENU,
KEY_BACK,
*KEY_HOME,*
*KEY_SEARCH*
Sent from my GT-I9000 (T959 mod) using XDA App
Thank for the input. After flashing bata 1 all the buttons are working. More to come: )
Sent from my GT-I9000 using XDA App
Hey, have a telus fascinate too. Know how to flash and all that fun stuff. Just don't fully follow where you make the changes for key mapping...if you could just guide me in the right direction, I can figure the rest out...
changes in the kernel zip? the beta zip? after flashing? something completely different?
thanks a lot!
There are no changes to be made with this ROM, they are built in. Just flash and all good.
I will post update tonight after work.
Sent from my GT-I9000 using XDA App
yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream
havoksupertwit said:
yeah sorry realized that immediately after posting / flashing to the new rom.
have you tried out BT audio? I can connect to different devices but audio won't stream
Click to expand...
Click to collapse
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
bucknetbucky said:
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
Calibrated my phone this morning. Heavy use today configuring everything but about 52% now (sooo 5 hours or use?)
Why god! Whhyyy!!
bucknetbucky said:
There are allot of BT related posts in the QA. I personally do not use any BT but I do have a headset that I will try when I get home.
Seems to be a battery drain issue too as my phone is now dead but I have not calibrated so we will see after I do that.
Click to expand...
Click to collapse
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.
iwebsource said:
AT LEAST YOU GUYS HAVE IT RUNNING!!
I am having a hell of a time trying to get it to work. I have tried so many different ways to get it up and running but no luck.
I've tried installing it from MIUI 3 times but all I get when trying to boot into ICS for the first time is a Black Screen after the FuguMod boot screen.
The funny thing is that the 4 soft buttons at the bottom light up still.
So I then decided to try the JVT way:
-Flashed JVT DARKYROM (ODIN)
-Lagfix OFF
-FULL WIPEs (factory reset, cache, dalvik)
-FLASHED CM7.1 STABLE
-FULL WIPEs (factory reset, cache, dalvik)
-Flash ICS BETA1
-Flash kernel
-FOR THE SECOND TIME:
-Flash ICS BETA1 AGAIN
-Flash kernel AGAIN
Same issue, black screen after the FuguMod boot screen, buttons still light up.
So i tried a couple more times in a few different ways based off what I have already tried, but this time, before booting into ICS for the first time, I installed the 'Superuser-3.0.6-efgh-signed.zip' package.
Same issue. I'm not having any luck here.
Click to expand...
Click to collapse
OK so here is what I did ...
Started from MIUI 1.11.18
1. Do a nandroid backup
2. download all the files to the SD card. This includes the ROM, Kernel and super user fix
Links:
Kernel:http://ice-cream-sandwich-sgs.googlecode.com/files/FuguModICS_GT-I9000_update.zip
ROM:http://ice-cream-sandwich-sgs.googlecode.com/files/ICS_4.0.1_r1-Beta1-i9000.zip
Super User:http://ice-cream-sandwich-sgs.googlecode.com/files/Superuser-3.0.6-efgh-signed.zip
3. Boot to recovery and do factory reset, wipe cache and davlik cache
4. Install the Kernel first and reboot now
5. Boot into recovery factory reset and wipe cache and Davlik and Install the ROM then reboot now
6 Boot back to recovery and install the Kernel again with out the wipe
7. If after reboot you do not have root then boot to recovery and flash super user fix
8. reboot and it should be working at least it was for me
It seems to me that you are missing the first flash of the kernel before the ROM. It sets up the file system from what I gather
Note: If needed flash the kernel and rom then kernel again with all the wipes as mentioned above.
I know there are allot of folks having issues getting it to run. Not too sure if it was the way I installed MIUI that might have made the difference.
My battery is charging now so I can calibrate it and see how it goes after that (it drained pretty quick today) lol.
I hope you can get it going cause it truly is awesome
Still not working:
Can not charge with the phone off
Google TTS stops working
Phone will not vibrate for SMS or email when in silent mode
BLN stays on for notifications until the phone is taken out of sleep (can be turned off)
Compass is why off (have not attempted to calibrate yet though)
11 MB left in the system partition (not much but I do not think there will be many changes there)
Video play back is choppy and some will not play
Bucky
regarding the black screen:
- had that too... I let it sit on the black screen for 2-3 minutes and then it went to the boot screen animation (a multi-coloured )...that for a few minutes...then finally booted.
How i got it working:
a) Started on MIUI...booted into clockwork
b) Backup
c) Wipe data / factory reset and cache and dalvik cache
d) Install rom and then kernel
e) Restart
f) Install rom and then kernel
g) Restart and wait very patiently for a little while
h) Once it all works, can reboot into clockwork and install superuser
Good luck! I really think the rom is nearly stable enough for daily use...
-------
Also have the no vibrate on silent... haven't tried the other stuff yet.
Oh and TTS hasn't crashed on this version yet for me...
Astrid glitches a little to a lot.
Changing from google tts to picco tts solves the problem there. As for the other stuff it is all reported as known.
I am using as a daily on my phone and no issues with general use. Still testing battery and that seems to be a bit of an issue with regard to Android OS as usual
Sent from my GT-I9000 using XDA App
So to install this ROM I would just have to install it as per totallydubbed's instructions? I don't want to flash miui if I don't have to to try this out.
Sent from my GT-I9000 (T959 mod) using XDA App

[Q] 1xII Internet being slow Energy Rom 3.5

Hello guys I just flashed my new evo 4g with Energy Rom 3.5 did all the data wipe and cache from rom manager, and I am not able to get 3g service all I get now is 1x service. Any Clues ?
It could be that you've had 1x service the whole time. Most custom roms disable the sprint hack that would show 3g when in fact you're in a 1x area.
If that's not the case. you can always try re-downloading the rom (in case of a bad download), or updating your profile and prl.
You didn't properly wipe your phone before flashing the rom. Please do it again.
lithid-cm said:
You didn't properly wipe your phone before flashing the rom. Please do it again.
Click to expand...
Click to collapse
Agreed - Rom Manager will only cause you problems, you need to start doing things in recovery. Switch to Amon Ra recovery, then in recovery wipe everything except sd, then flash the rom.
well tried wiping again and installing amon ra recovery using it to wipe all of the data/cache/dalvic and installing energy rom... again also tried installing the cyanogen and couple of others, still no go still getting 1x speed and icon on most of them. my gf shift evo 4g gets 3g service, with 3g speeds abeit not too fast but, it does work cause it's running cyanogen mod, aosp kernel and everything. is there a way to do a complete restore to factory now.... can you point me to the right direction on how to get that done
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/st...t-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.
Have you updated profile and prl?

Phone's wifi&bluetooth dead

Hey guys!
In the last week my wifi&BT stopped working suddenly, without any software change or new app installed. e.g. (when I swipe wifi, it looks like it is working, but cannot find any network)
mobile data still functions.
After reading quite a lot of manuals, I understood it might be a hardware malfunction, However, I tried to do few things already to understand if there might be another reason, none of the below worked
-Play with aeroplane mode and wifi.
-wifi fix applications
-Factory data reset.
-Wipe the phone and flash oxygen 3.1.0 via TWRP.
Before giving up, Wanted to ask if you have any advice that might help:
Any customized room that might will work?
Any way to check the phone log to understand what happens when we do it?
Any general advice?
Thanks in advance!
E.
try this rom
follow the guide completely
http://forum.xda-developers.com/oneplus-2/general/rom-hydrogenos-v1-2-0-sensors-t3264711
araaraara123 said:
Hey guys!
In the last week my wifi&BT stopped working suddenly, without any software change or new app installed. e.g. (when I swipe wifi, it looks like it is working, but cannot find any network)
mobile data still functions.
After reading quite a lot of manuals, I understood it might be a hardware malfunction, However, I tried to do few things already to understand if there might be another reason, none of the below worked
-Play with aeroplane mode and wifi.
-wifi fix applications
-Factory data reset.
-Wipe the phone and flash oxygen 3.1.0 via TWRP.
Before giving up, Wanted to ask if you have any advice that might help:
Any customized room that might will work?
Any way to check the phone log to understand what happens when we do it?
Any general advice?
Thanks in advance!
E.
Click to expand...
Click to collapse
Earlier today, my fingerprint sensor/home button completely stopped working.
I tried restarting, wiping cache and dalvik cache, re-installing the ROM, and I even went back to OOS and H2OS (both stock ROMs) to see if it would work. Alas, nothing worked.
A friend of mine then called me. I told him my home button is dead. He told me it happened to him once, and all he had to do was force restart the phone and it worked again.
I'll suggest that you try the same.
Hold the power button for ten seconds while your phone is on and it'll force restart.
Hope this fixes your problems, mate!

Categories

Resources