Database Users

[Q] 2.3.4 Wireless problem on NexusHD2-Gingerbread_V2.7_NAND

Hi,
I've been searching for a solution to my problem for several days now but couldn't find anything.
This is the spec for my device:
HSPL: 2.08
Radio: Leo_RADIO_2.15.50.14
Bootloader: MAGLDR 1.13
Recovery: ClockworkMod Recovery 3.0.2.4
I was using NexusHD2-Gingerbread_V2.6_NAND_(Android-2.3.3) rom from this page without any issues. I decided to update to NexusHD2-Gingerbread_V2.8 (2.3.4), no errors with update. After that, I realised that my internet connection was gone. I can see that it is connected to APN (H or 3G logo visible) but no connection. I tried to connect to wi-fi after that, but this time it is stuck saying 'turning on...' on wireless screen. I have tried updating to V2.9 (2.3.5) today but no joy. Same problems. Everything else seems to work fine. I read that there was a wireless related change after 2.3.4 but couldn't find anything related to this problem.
EDIT: I've also tried downgrading the radio to 2.14.50.02, still the same.
I'd really apreciate if someone can help me.

can you try a clean installation,i mean task 29,flash radio,flash mgldr, cwr partition,flash the rom. for instance i had market problem with tyween's typhoon rom and clean installation solved it

Thanks mate, that worked perfectly. For me the order was like this : task 29, flash radio, flash mgldr, flash ClockworkMod Recovery, flash the rom.

[Q] Very Strange Issue with Custom Roms, please help

Hello everyone,
I've tried several different roms on my X5, and some weeks ago I had a strange issue.
I had just installed MIUI 2 or 3 days before, and decided to change back to CM7.
Since I've done that my phone randomly freezes and restarts, sometimes even in the recovery. I've tried all the custom roms and they ALL have this issue now. System boots and 2 to 5 min later it just freezes and reboots.
Also I've noted that when it's booting it takes significantly more time than any other x5 (i've turned 2 iDeos X5 on at the same time and this one takes 2 more minutes to boot).
Now for the really weird part...
If I restock it with the official 2.2 rom I have absolutely no issues at all! Phone runs perfect, never freezes and never breaks.
I've tried everything, multiple kernels, multiple roms, played around with processor speed, reformatted internal SD, repartioned, fixed the permissions.... I'm at a loss, I have no idea what else to try, and since my phone is perfect on stock rom I cant really send it back to "fix" because apparently nothing is broken...
Anyways, help would very much be appreciated
Thanks

Did you totally reset the phone?
So when you open recovery:
* wipe data/factory reset
* wipe cache partition
* Advanced -> Wipe Dalvik Cache

Yep, did that everytime.
Also, the phone sometimes freezes on installing in recovery rom. mid-installation it just reboots...

which recovery version are you using?

I've tried 4.0.1.5 by Geno and 5.0.2.6.
also I've tried the others, but recovery freezes mid-installation

This doesn't seem to have an easy solution.
Try to use the powerful logcat utility to investigate what causes the problem. You can run it from a command prompt window(pc) with command:
adb logcat
or
adb logcat > log.txt
if you want to create a log file to C drive instead of display the output to command prompt window. Post the logfile here.
Maybe then someone can find the issue and hopefully a solution to your problem

thx for the idea, i'll try it when I get home and post the log when I have it

Hello again, haven't had the change to do the log, but I just found out something really strange.
I have here 2 iDeos x5, one works one freezes. What I just found out is that the one that works shows 353mb of RAM, i've researched online and says that this is normal because the rest of the memory is allocated for the GPU.
What is strange is that the one that freezes shows 512mb of Ram, making me believe that it has no video memory hence freezing the phone when I try to do something graphics wise...
Anyone know if this ever happened? or ideas on how to fix it?
Thank you so much

[Q] Everything gone wrong.

It's currently 7am on monday morning, and I have college. I haven't slept at all because my [red lens] defy has been giving me problems.
I've been trying to re-flash CM7 to get a clean install of it, with no frills/apps that I've installed over time.
I've done a factory reset through CWM, and re-flashed CM7.1 from here:
http://download.cyanogenmod.com/?type=stable&device=umts_jordan
I've tried finding GApps for this, but to no avail. None of them install properly (CWM says they have, but actually hasn't - It's nowhere on my app drawer/home/manage apps).
I've tried adding an account to sync but when it asks what google products I want to install (such as YouTube, Maps, StreetView), it crashes mentioning "process com.teamdouche.pacman"
That's problem 1
Problem 2 is my Home and Search button no longer work! I've tried everything I could google for, but nothing has helped.
[Edit: they do vibrate, but nothing happens]
Any help on these matters would be much appreciated, as this is really annoying :/ Thanks.
Also I've just realised the apps in Manage Applications are all my old apps, even though I've actually formatted my SD card in CWM since, each has a SD card icon, and is taking up 0.00B space,but I'm just wondering how they even show there..

Did you try flashing the CM7 kernel ?
Or did you mount /system ?
Herpderp Defy.

Here's my About Phone info:
Android Version - 2.3.7
Baseband Version - EPU93_U_00.59.01
Kernel Version - 2.6.32.9-gb08c3c8 [email protected] #1
Mod version - CyanogenMod-7.2.0-RC1-Defy-KANG (CM7 White Rabbit)
http://forum.xda-developers.com/showthread.php?t=1510063 <- WhiteRabbit
Do you have a link to the CM7 Kernel? :S
System is mounted
I've managed to get Market installed, but it only opens once, and when I try to download something it Force Closes, and then after that it force closes when I open it.

Flash stock rom for noow ....
Sent from my MB525 using XDA App

dude, restore stock room, and try flashing an official cm7, what i think is that the room that you flashed is corrupted or something like that
1º: Reflash a stock room
2º: Get a official stable CM7 room ( http://download.cyanogenmod.com/?type=stable&device=umts_jordan )
3º: Don't forget to wipe all data, cache and dalvik cache.
4º: See if that works and thank me for this
EDIT:
Here is a link to Gapps, just in case (http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip )
good luck with your defy

Encountered Market, GPS, WiFi problems with CM7 for HTC Click / HTC Tattoo

Hello there guys... These are my problems and some solutions for HTC Click / HTC Tattoo and CM7 (update-cm-7.1.0.1-click-signed.zip in time of writing - go to CyanogenMod HTC Click official thread) which I have found out, others, well I need help too.
Rooting
--------------------------------------------
- First I've tried with various m7 exploits and getting commands through adb, but since I am not a power user I could not really foresee what can happen and what can not. It took me a several hours of nervousness with potential break-down of both me and my phone (by me of course), to realize that root ain't going to happen that way (at least permanent root will not).
- Then an "epiphany" in form of Universal Androot 1.6.1 came in, and it worked from first HTC Click (little SEO here), all other methods seem to be sh.ty comparing to this little apk. It took me a several hours of thinking about hurting my self for not googling or search at XDA Forums prior.
Recovery
--------------------------------------------
- Well, learned by experience, recovery came easy. I've used 1Click method (which can also root your device, but I have already did it with Universal Androot, so it is your choice)
ROM Flashing
--------------------------------------------
- Well now there is a light in HTC Tatto / HTC Click (again SEO). I have installed Froyo AOSP 0.63 ROM, just to try everything. I had some problems with WiFi and there was no market installed. I tried to install market with gapps and everything came with market. But then again my wifi was not working so I said to my self: OK, let's go to CM7 they know what they are doing.
- Then I have turned ON GPS WiFi and bluetooth (just to be sure that everything will work with GingerBread ROM) and flashed CM7 from SD Card.
Enter problems.
Problems encountered
--------------------------------------------
First of all, I DON'T HAVE A FREAKIN' MARKET installed at all.
I have encountered WiFi problems (it could not find my home network which it has found on stock rom)
No GPS Icon in status bar when GPS ON, and I don't know if it is working properly.
No gapps and NO MARKET.
AND after I've tried to install gapps from some sources (which should work with CM7) my phone got a hang and was constantly looping CM7 logo. It would go on until I can see lock/unlock screen than it would hang and return to boot logo and then again to lock/unlock screen and it would loop until the end of world. I tried everything to flash again (first without wipe, then with wipe), get the battery out, reboot and so on, but problem persisted.
2. WiFi solution
--------------------------------------------
- I have found somewhere that if you go to -> Wifi Settings and press menu button while in settings there is a tab -> Advanced and when you go to -> Regulatory domain just change it to use all 14 channels instead of 11 as it is set by default. And voila my wifi is working. But there is no FREAKIN' MARKET. So I don't know for what should I use my wifi (of course I surf and check mail, but I don't want to do that on HTC Click's browser, I do it on my notebook).
5. Looping solution
--------------------------------------------
Then I've cleared all the /data, /boot, /system, /cache partitions from recovery 5.0.2.0 from "mounts and storage" section and wiped it again. Flashed CM7 7.0.1.0 for HTC Click (last one in the time of writing) and it was helpful. I could start to HTC Tattoo my self.
(other solutions are yet to be found, I will edit this post if I find something)
**I take no credit for solutions, I've found them here in XDA Forums.

Did you flashed gapps, you have to do it after you flash a custom rom if you want to get market and other google apps, btw i ja sam bosanac

I faced the problem that my tattoo didn't find my WiFi and try everything but can't solve. Till I saw your thread and I follow your "2. WiFi solution", it's work great Thanks for your sharing @ djudjix.

And the GPS was solved by....?

Ihaveatattoo said:
And the GPS was solved by....?
Click to expand...
Click to collapse
"In order to make sure GPS is working when upgrading to this rom from a Froyo rom, leave GPS on in the old rom before flashing. If it's disabled, you might not be able to turn it on again without reflashing Froyo again."
quoted from following post
http://forum.xda-developers.com/showpost.php?p=10171474&postcount=1
applies to any ROM above froyo.

[Q] Data Connection Issues caused by amarullz data2sdext?

Hi,
for some time now, I am experiencing problems with my data connection. When I am leaving home, my phone doesnt reconnect to mobile data connection from time to time. This also happens when being in the train or so: If there is no connection available and there comes a new, my phone doesnt reconnect. Switching data off and on sometimes solves the problem but most of the time, i have to reboot. Going to airplain mode often freezes my connection totally (like airplain mode OFF is greyed out/inactive).
As this problem only happens with some installations of roms and sometimes doesnt, i did a little survey and recognized, that its only and allways happening, when i am using Amarullz Data2sdext mod. I like this mod better then data2sd mods normally implanted in Hyperdroid so i am asking, if i do something wrong:
I Have a EU Leo, CLK 1.5 cwm touch. In the last time, i used differend Hyperdroid roms like 5.8 and 5.10 (left 5.9 out) and the ICS rom by tytung (V1.5). With Hyperdroid, i did the following:
1) wipe data/factory reset
2) wipe boot/system/dalvik/sdext everything alse despite sd
3) install the rom
4) boot once without signing in to google
5) reboot to cwm, installing the recovery version of amarullzdata2sdext
6) fixing perm
7) boot
8) reboot to cwm
9) fixing perm
10) boot + signing to google etc...
11) daily use
when i flash amarullz data2sdext, the installer says, that it removes data2sd before... may there be problems resulting due to data allready moved to sd before so i can bypass them by editing the zip, removing the old skript and integrating amarullz skript? Are there other possibilities?
Also one other question: in CLK 1.5, we can choose using last 24MB of ROM... may this result in rom freezes? I think I was experiencing so.
Thanks a lot,
Cmoe