[Q] Can a Defy+ Custom ROM run on Defy ?? - Defy Q&A, Help & Troubleshooting

i was wondering if i could try the latest CM9-NIGHTLY-120411-Defy+.zip(DEFY+ zip) on Defy running 4.04 (1204006)??
is it safe... what files will i need to use??? do i hv to try to the different kernel.. till now i had been using CM7 kernel...for my defy.

coolatin said:
i was wondering if i could try the latest CM9-NIGHTLY-120411-Defy+.zip(DEFY+ zip) on Defy running 4.04 (1204006)??
is it safe... what files will i need to use??? do i hv to try to the different kernel.. till now i had been using CM7 kernel...for my defy.
Click to expand...
Click to collapse
I am not sure, but previous versions by eppy, talking bout dec 2011 builds, were defy+ builds too and they worked on the normal defy. But I have forgotten, how or what was to do oO
I wouldn't try it, cause I am too afraid to do something wrong and brick. have you fully read through the CM9 thread? maybe there is kinda an answer.
Other possible problems, i thinnk can appeare are:
-Battery not loading, due to different battery properties
-Camera Problems
I would recommend, to wait these 2-3 days until a new defy build appears. This will be optimised for the "normal" defy.
I also heard people are experiencing problems with 1104 build...

You will have to flash the gingerbread kernel first (defy+ kernel) and afterwards you may have battery problems.

And if you have defy green lense your camera wont work.

labsin said:
You will have to flash the gingerbread kernel first (defy+ kernel) and afterwards you may have battery problems.
Click to expand...
Click to collapse
Yup, as mentioned in this thread you can install in red lens defy after flashing the defy+/gb kernel but you also need a battery patch as the charge ratings are different for defy and defy+.
coolzarjun said:
Will it work for a red lens normal defy ??
Click to expand...
Click to collapse
prasannavl said:
You may have to find the patch for battery first which works with DFP-231. Other than that, I don't think there should be any problem.
I only have a Defy Plus. So, can't test it.
Click to expand...
Click to collapse

Related

[Q] Defy BL7 install CM7 error :(

ok... managed to root the phone
installed 2nd init 1.4.2 for defy
but now when i try to install CM 7.2 RC gives me an error after the package is verified
it says it's not signed...
help
pss214 said:
ok... managed to root the phone
installed 2nd init 1.4.2 for defy
but now when i try to install CM 7.2 RC gives me an error after the package is verified
it says it's not signed...
help
Click to expand...
Click to collapse
I'm not really sure about the version numbers :/ Did you select "Latest" and not "Stable" recovery to be installed? You need "Latest"..!
Other than that... You are stuck on bl7 means that you are on 2.3.6, right? I think that official CM7.2 RC is a Froyo ROM. I could be wrong though. And even if it is, it still should flash it normally. (but you would end up being stuck at boot logo..!)
Anyway, Quarx's are the best Gingerbread builds (and latest) - http://quarx2k.ru/cm7-nightly-defy+/
P.S. You've posted in the wrong sub-forum
But the cammera will works (green lens Defy with BL7)? Also, I think he need to change that batt file? Where is it located and what's its name?
LeopardSurd said:
But the cammera will works (green lens Defy with BL7)? Also, I think he need to change that batt file? Where is it located and what's its name?
Click to expand...
Click to collapse
Oh, yeah, right, Quarx's Gingerbread builds are meant for an actual DEFY+ so you need the Defy battery fix (you can use the one provided by Auris for CM9, it's the same thing).
I have no idea about the SOC camera and BL7, though :-/ You can flash Froyo (CM7) kernel once you have CWM? Have no idea if it would work :S
the phone is rooted and i have 2nd init on it installed.... what now?
i want my camera and my battery back...
can i install CM 7 ?
The Development section is only for threads in which actual development is taking place
help please

ROM Builds for Motorola Defy (Bayer / Red)

H! Guys,
After months of flashing i discovered (N00b :silly that i can flash Defy+ builds on my Defy (Red) and use Kernel - 4.5.2_DHT-22 and i get Battery life of more than 30 Hrs.....
So i just wana confirm i can flash any Defy+ build (CM7/ ICS / CM10) and use above kernel ???
ashish386 said:
H! Guys,
After months of flashing i discovered (N00b :silly that i can flash Defy+ builds on my Defy (Red) and use Kernel - 4.5.2_DHT-22 and i get Battery life of more than 30 Hrs.....
So i just wana confirm i can flash any Defy+ build (CM7/ ICS / CM10) and use above kernel ???
Click to expand...
Click to collapse
Yes, I'm using Quarx's Defy+ CM9 on my red lens Defy with the kernel and it's working great and I get more than 48 hours of battery life with normal use.
defydent said:
Yes, I'm using Quarx's Defy+ CM9 on my red lens Defy with the kernel and it's working great and I get more than 48 hours of battery life with normal use.
Click to expand...
Click to collapse
Thanks for the reply....
Another issue is i flashed CM7 Defy+ (Fuzz Build) i can boot but battery shows ? icon..... Can u pls provide me Battery fix for CM7.
ashish386 said:
Thanks for the reply....
Another issue is i flashed CM7 Defy+ (Fuzz Build) i can boot but battery shows ? icon..... Can u pls provide me Battery fix for CM7.
Click to expand...
Click to collapse
In Defy > General forum there's a thread about Quarx CM9 builds for Froyo and GB kernel. In the first post there's a patch for Defy red lens using Defy+ roms. I suggest you can try that. Did you took a nandroid backup before flashing that rom, if the patch does not work, try restoring it. I have never faced the battery issue, probably because I used Quarx's CM7 builds. Never tried Fuzz's, and now am scared to..
Here's the link

Battery Fix Red Lense cm7.2 defy+

can someone link me to a battery fix for the plus version of cm7.2 made by quarx? im currently using a red lense defy, and I CANT find the f*cking battery fix for red lense in cm7 really.. I only find for cm10 and cm9 battery fixes!
mariosanoguera said:
can someone link me to a battery fix for the plus version of cm7.2 made by quarx? im currently using a red lense defy, and I CANT find the f*cking battery fix for red lense in cm7 really.. I only find for cm10 and cm9 battery fixes!
Click to expand...
Click to collapse
have you tried the cm9 and cm 10 ones? I think they should work...
B4ast1 said:
have you tried the cm9 and cm 10 ones? I think they should work...
Click to expand...
Click to collapse
they released a new battery fix for cm10 because its located in another place or something?
I will try with cm9 battery fix since the cm10 doesnt work
mariosanoguera said:
I will try with cm9 battery fix since the cm10 doesnt work
Click to expand...
Click to collapse
Did this work?
And if so could I please ask your opinion? I also have a red lens defy. I am on Epsylon3's froyo kernel and using Quarx's CM10. I want to go back to CM7.2 and want to use Quarx's nightly that has 720p recording. Do I need to flash a GB kernel and use the defy+ build for 720p to work, or can I stay on the froyo kernel and use the defy build? The reason I want to stay on froyo kernel is that I don't want the battery issues.
I tried a CM7 Defy+ build on my Defy Red Lens, used a battery fix I got from the ParanoidAndroid dev forum and it kinda worked. I say kinda cuz when I try to reboot it actually powers off and cannot get on til a battery pull, but everything else is OK
m0ndul said:
I tried a CM7 Defy+ build on my Defy Red Lens, used a battery fix I got from the ParanoidAndroid dev forum and it kinda worked. I say kinda cuz when I try to reboot it actually powers off and cannot get on til a battery pull, but everything else is OK
Click to expand...
Click to collapse
Thanks did you have to flash a GB kernel, or did you stay on the froyo kernel?
I flashed the GB kernel, didn't tried the froyo kernel though, it normally bootloops with defy+ roms
Sent from My Moto Defy
I have a CM9 GB kernel on defy red lens, wanted to install CM7 Defy + as multiboot. But my Cm7 shows a '?' for the battery status icon. Tried Battery fix for 1500mah defy red lense also tried ICS red lense batt fix but no use.
Battery fix
This is battery fix for Defy+ (MB526)
Install via "flash .zip" in the recovery them restart your phone
If it don't work, it's that the kernel had changed so, re-install attached kernel also by "flash .zip" in recovery system, restart your phone and you will see the battery's percentage.
euros60 said:
This is battery fix for Defy+ (MB526)
Install via "flash .zip" in the recovery them restart your phone
If it don't work, it's that the kernel had changed so, re-install attached kernel also by "flash .zip" in recovery system, restart your phone and you will see the battery's percentage.
Click to expand...
Click to collapse
Tried it but still no battery status. Maybe i have a froyo sbf flashed earlier and then I installed MIUI/WIUI n then installed the CM9 GB with GB kernel. Anyways dont want to do a fixed sbf +nandroid now and redo everything will try to get a CM10 Gb working.

Answer : How to custom Kernel ´Defy+ JB Quarx

Everything for testing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I wrote this for maybe less confusion
Works with my Defy - red lense Bayer cam - on Defy+(gingerbread Kernel) Jelly Bean Quarx 24.8 Rom
I´ve
1. Flash test_2ndboot_6.10.zip from http://quarx2k.ru/ or my 2ndboot_06.10.zp from attached dropbox (search for 2ndInit recovery if you dont have and root your defy)
2. Boot into Recovery
3. Set 2ndboot as default
4. Go to tools/adb daemon and klick it and then reboot
If you want to go back to stock gb kernel flash stock kernel -like gb-234-451-134-signed.zip from dopbox i´ve attached
Remember everything is for Test the custom kernel
OT - Multiboot is ok with CM7 but akku is always 100%
https://www.dropbox.com/sh/4fg71wuehyibzzx/oanepGgaRR
BIGNOTE: Green lens users who flashed redlens builds please dont try using flash, you will end up burning it like me and many others
Big thanks to our great DEV´s Quarx as porter :good: , Walter for fixing :good: and MS2 Dev czechop who made this possibile :good:
Great works men !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
Hi, i tried all the methods without sucess... Alldays the same: blue led then red and stuck at moto logo. Any ideas?
Sorry for my english and thanks in advance
Redhotero said:
Hi, i tried all the methods without sucess... Alldays the same: blue led then red and stuck at moto logo. Any ideas?
Sorry for my english and thanks in advance
Click to expand...
Click to collapse
Defy or Defy+ ?
bone101 said:
Defy or Defy+ ?
Click to expand...
Click to collapse
Defy red lens with defy + build gb kernel
Sent from my MB526 using xda premium
I have done it in such manner
1. Prepared on SD card:
- CM10 ROM 24/09 for MB526,
- gapps for JB
- Qkernel 2ndboot_06.10.zip (with improved 2ndboot.ko)
2. Done factory reset and viped caches
3. Installed CM10 and gapps in normal manner
4. Flashed Qkernel
5. Went to bootmenu and choosed 2nd-boot (there was no chance to set it as default... i think, because phone immediately reboots)
And achieved "half success". All is working but with extremely lags... Was said so after first bootup system suppose to be laggy and needs to wait some time on sleep state with WiFi switched off. I was waiting whole night.
So now I want to know, if my procedure is right.
Nobody mentions gapps during instali of ROM - i suppose it's so trivial so nobody count it on...
Another problem - is there need of factory reset or cache wipe?
After installing Qkernel i went to boot menu to set 2nd-boot as default, but when i choose 2nd-boot phone reboots and I don't know what now with this setting up deafult 2nd-boot...
I am trying to fond any reason of system lagginess. Maybe something was done wrong. What's your opinion? To change ROM build? Or something else...
Redhotero said:
Defy red lens with defy + build gb kernel
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
You can try it with the kernel from my drop box
I nerver wiped anything
For me it works as I've done
http://forum.xda-developers.com/showthread.php?t=1542956
bone101 said:
You can try it with the kernel from my drop box
Click to expand...
Click to collapse
Of course I can try, but does it make any difference? Well, will see...
So I'm supposed to flash your kernel "as is" without much deliberation over existing installation?
If you are on boot loader ver 7 i cant say that it would work
Some peoples in this
http://forum.xda-developers.com/showthread.php?p=32535395
Wrote about problems with custom kernel . Look around page 67 if your defy+ was stock bl7
I am using regular Defy with Bayer module and as first owner I am sure so there was not flashed any full sbf except once when I was forced to flash stock Froyo, so there is no case of BL7 I think...
So if I try can I flash this kernel over existing system or should I reflash ROM too?
bone101 said:
You can try it with the kernel from my drop box
Click to expand...
Click to collapse
Tried without success. Ill have to flash sbf rigth? Which do you recommend?
what are the advantages of using this kernel?
I don't know the advantage, for me it works as i do.
I started with stock cee European gingerbread which I've flashed after offical update comes out
New nightley from quarx cm10-2ndboot-nightly-defy(+)
Is out & works a bit faster
bone101 said:
I don't know the advantage, for me it works as i do.
I started with stock cee European gingerbread which I've flashed after offical update comes out
New nightley from quarx cm10-2ndboot-nightly-defy(+)
Is out & works a bit faster
Click to expand...
Click to collapse
Flashed new nightly and problems are gone
Redhotero said:
Flashed new nightly and problems are gone
Click to expand...
Click to collapse
thank to quarx
trurl3 said:
I am using regular Defy with Bayer module and as first owner I am sure so there was not flashed any full sbf except once when I was forced to flash stock Froyo, so there is no case of BL7 I think...
So if I try can I flash this kernel over existing system or should I reflash ROM too?
Click to expand...
Click to collapse
In General section http://forum.xda-developers.com/showthread.php?t=1909242&page=84
they talk about BL5 and BL6 is supportet by quarx not BL4 and BL 7
Some say it works on BL7
But better read there for your self.......beforr you flash anything and think about warrity/garantie
For every booting i had to umount and mount again the battery.
And no Deep-Sleep in about 12 hours
Anyone else with this problems?
---------- Post added at 09:37 AM ---------- Previous post was at 08:49 AM ----------
Now Deep-Sleep is ok. Dont know why .... But ... Quarx said in the xda-developer thread,
that with no usb-cable and with wifi disabled the defy should go 10-15 sec. in deep-sleep.
Before i have had usb-cable on or wifi enabled. Maybe that has been the reason.
After 3 hours 14 % battery drain ... not good ...
Quarx edited a new Rom today.
But after getting more and more slow reactions from the defy+ i flashed the 24.09 version.
All tips didn't really work in a good way.
And I need my defy+ functionabel this days.
But next time again ...
And today again a new kernel for update as *.zip ...
quarx2k.ru/cm10-2ndboot-nightly-defy(+)/update_for_11.10_v2.zip
13.10 Kernel update:fix wifi tether(reboot), reduce battery drain, compiled with linaro 4.5, fix charge only mode, cleanup unused drivers.

SOLVED green lens with defy+ firmware camera not working

after a month of searching and flashing and reflashing still couldn't get my camera to work on my defy
i flashes a bl7 rom from defy+ and can't downgrade so i got stuck with a defy ( soc/green lens) with no camera working
thanks to quarx i got my camera back
it's simple flash the latest cm10 nightly from quarx link quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ and you're done
hope it helps you guys
again thx quarx
Thankyou very much, I was looking for that since about 6 months, nothing helped, but this really works with my 'old' defy (green-lens-camera) and bl7.
you're welcome
milou1us said:
Thankyou very much, I was looking for that since about 6 months, nothing helped, but this really works with my 'old' defy (green-lens-camera) and bl7.
Click to expand...
Click to collapse
you're welcome had the same problem as you can see but for a month
searched all forums and tried quarx rom... and i got very excited when i saw it worked and had to post it cause it's kind of a problem with moto not unlocking bootloaders
kmikze89 said:
after a month of searching and flashing and reflashing still couldn't get my camera to work on my defy
i flashes a bl7 rom from defy+ and can't downgrade so i got stuck with a defy ( soc/green lens) with no camera working
thanks to quarx i got my camera back
it's simple flash the latest cm10 nightly from quarx link quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ and you're done
hope it helps you guys
again thx quarx
Click to expand...
Click to collapse
hi,
i have the same problem:
accidentily flashed bl7 on my green lense defy (DFP-231).
now if i try to flash the lastest cm10 as advised, after reboot my defy gets stuck at the red m, right before the boot animation. i can enter the stock recovery, but it does not come as far as the blue led for custom recovery.
any ideas?
Need help !
kmikze89 said:
after a month of searching and flashing and reflashing still couldn't get my camera to work on my defy
i flashes a bl7 rom from defy+ and can't downgrade so i got stuck with a defy ( soc/green lens) with no camera working
thanks to quarx i got my camera back
it's simple flash the latest cm10 nightly from quarx link quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ and you're done
hope it helps you guys
again thx quarx
Click to expand...
Click to collapse
Bro.. I had the same problem (Defy green lens)and was able to fix it with 2nd boot quarx rom and the camera got fixed. Thanks to Quarx and this community ! I had battery drain issues on official GB ROM and my battery would hardly last for 4-5 hrs even when not in use and would be dead in a couple of hours of internet usage over GPRS and would drain close to 50% even on stand by & screen turned off.
Did u experience same issues ? if so, has this been solved after installing this new ROM ?
Did u flash 2.2 (froyo) kernel while installing the new ROM ? coz I'm afraid to do so.. as it might burn my device..
pgraf said:
hi,
i have the same problem:
accidentily flashed bl7 on my green lense defy (DFP-231).
now if i try to flash the lastest cm10 as advised, after reboot my defy gets stuck at the red m, right before the boot animation. i can enter the stock recovery, but it does not come as far as the blue led for custom recovery.
any ideas?
Click to expand...
Click to collapse
is your phone rooted?
did you wipe data, cache, dalvik-cache and battery stats?
do you have custom recovery? cwm?
flah the rom from cutom recovery
p.s. after the firt boot on my defy it stayed around 10 mins on the m logo after that i rebooted it and it worked
hope i was helpfull
snandakishore said:
Bro.. I had the same problem (Defy green lens)and was able to fix it with 2nd boot quarx rom and the camera got fixed. Thanks to Quarx and this community ! I had battery drain issues on official GB ROM and my battery would hardly last for 4-5 hrs even when not in use and would be dead in a couple of hours of internet usage over GPRS and would drain close to 50% even on stand by & screen turned off.
Did u experience same issues ? if so, has this been solved after installing this new ROM ?
Did u flash 2.2 (froyo) kernel while installing the new ROM ? coz I'm afraid to do so.. as it might burn my device..
Click to expand...
Click to collapse
not sure what you are aking but if you have bl7 on your green len dont flah any kernels except the one from quarx if you want the phone to enirely work
as for the drainage iue i ddint have before or after quarx cm10
i dont have my defy anymore
but with 1 hour of talking 2-3 of wifi and 1 of 3g it lasted 2 days
so maybe its just your battery
try to fully charge it
then go to cutom recovery -> advanced -> wipe battery stat
or fully charge it and use from playtore a battery calibration app
bet rgds
snandakishore said:
Bro.. I had the same problem (Defy green lens)and was able to fix it with 2nd boot quarx rom and the camera got fixed. Thanks to Quarx and this community ! I had battery drain issues on official GB ROM and my battery would hardly last for 4-5 hrs even when not in use and would be dead in a couple of hours of internet usage over GPRS and would drain close to 50% even on stand by & screen turned off.
Did u experience same issues ? if so, has this been solved after installing this new ROM ?
Did u flash 2.2 (froyo) kernel while installing the new ROM ? coz I'm afraid to do so.. as it might burn my device..
Click to expand...
Click to collapse
sorry for the spelling i have some issues with my keyboard
kmikze89 said:
not sure what you are aking but if you have bl7 on your green len dont flah any kernels except the one from quarx if you want the phone to enirely work
as for the drainage iue i ddint have before or after quarx cm10
i dont have my defy anymore
but with 1 hour of talking 2-3 of wifi and 1 of 3g it lasted 2 days
so maybe its just your battery
try to fully charge it
then go to cutom recovery -> advanced -> wipe battery stat
or fully charge it and use from playtore a battery calibration app
bet rgds
Click to expand...
Click to collapse
I mean, I have a Defy (Green lens) my phone was updated to Defy+ firmware(official 2.3.6 )by the service center and naturally that screwed up my battery and camera . So I guess I'm on BL7 ROM now. Camera came alive only after installing the CM10 Quarx ROM but the battery life doesn't seem to change much. I'm now on 17/11 ROM coz, heard that this ROM has battery battery backup, not sure how far will it help in my situation bcoz after the 2.3.6 firmware update by service center battery completely screwed up and used to last for half a day at most.
Plz let me know if there is a solution for the battery drain issue that I'm facing. May be a battery fix or something
Thanks and regards
Kishore
snandakishore said:
I mean, I have a Defy (Green lens) my phone was updated to Defy+ firmware(official 2.3.6 )by the service center and naturally that screwed up my battery and camera . So I guess I'm on BL7 ROM now. Camera came alive only after installing the CM10 Quarx ROM but the battery life doesn't seem to change much. I'm now on 17/11 ROM coz, heard that this ROM has battery battery backup, not sure how far will it help in my situation bcoz after the 2.3.6 firmware update by service center battery completely screwed up and used to last for half a day at most.
Plz let me know if there is a solution for the battery drain issue that I'm facing. May be a battery fix or something
Thanks and regards
Kishore
Click to expand...
Click to collapse
never had the battery issue
are you sure your carrier updated your phone to defy+ firmware?
cause if so they should change it for you
do you have dfp 188 / dfp 231 / dfp 2311
check them somewhere in the about phone section from settings
if you have them youre surely on bl7
as for the battery dont know what to say
you can try to contact quarx for more details
kmikze89 said:
never had the battery issue
are you sure your carrier updated your phone to defy+ firmware?
cause if so they should change it for you
do you have dfp 188 / dfp 231 / dfp 2311
check them somewhere in the about phone section from settings
if you have them youre surely on bl7
as for the battery dont know what to say
you can try to contact quarx for more details
Click to expand...
Click to collapse
Bro...
I'm not sure what you are referring to and was unable to find what you have mentioned, but I'm pretty sure that my phone was upgraded to official 2.3.6 ROM by the service center and those f**** will not change it for me. And I'm not sure if at all it would be possible to go back to froyo as it was upgraded to official GB ROM.
Is there a way out ... any ideas
Regards
Kishore
snandakishore said:
Bro...
I'm not sure what you are referring to and was unable to find what you have mentioned, but I'm pretty sure that my phone was upgraded to official 2.3.6 ROM by the service center and those f**** will not change it for me. And I'm not sure if at all it would be possible to go back to froyo as it was upgraded to official GB ROM.
Is there a way out ... any ideas
Regards
Kishore
Click to expand...
Click to collapse
if its defy+ rom you should see mb526 at your model number you cannot downgrade it
not untill the bootloader is unlocked and there are minimal chances
the only way is to stay on quarx's cm10
as for the battery drainage problem try to calibrate it
solved battery drain !!!
snandakishore said:
Bro.. I had the same problem (Defy green lens)and was able to fix it with 2nd boot quarx rom and the camera got fixed. Thanks to Quarx and this community ! I had battery drain issues on official GB ROM and my battery would hardly last for 4-5 hrs even when not in use and would be dead in a couple of hours of internet usage over GPRS and would drain close to 50% even on stand by & screen turned off.
Did u experience same issues ? if so, has this been solved after installing this new ROM ?
Did u flash 2.2 (froyo) kernel while installing the new ROM ? coz I'm afraid to do so.. as it might burn my device..
Click to expand...
Click to collapse
******************
just make a new google account and use only the new account.
i had the this problem and now the phone is working fine.
Cristi Bazavan -Defy 525 with full 526-2.3.6 bl7-NOW cm10-2nd init-green lens
Need a Stable 2nd Boot Quarx ROM or any other compatible ROM
cri1410sti said:
******************
just make a new google account and use only the new account.
i had the this problem and now the phone is working fine.
Cristi Bazavan -Defy 525 with full 526-2.3.6 bl7-NOW cm10-2nd init-green lens
Click to expand...
Click to collapse
Hi Brother, It's been a loong time now.. but if you are still active here, could you please help me out with a stable 2nd boot Quarx ROM or any other stable 2nd boot ROM that works for me? As I'm still running on Nightlies (Sept 30th) and development on this is going painfully slow...: well can't complain though.. I just need something more stable.. the nightlies have some lag and the devices seems to be too slow even when not using data. I just want to put a stable OS on this and keep this aside.
Thanks for all the help from this community.. Really greatfull

Categories

Resources