SOLVED green lens with defy+ firmware camera not working - Defy Q&A, Help & Troubleshooting

after a month of searching and flashing and reflashing still couldn't get my camera to work on my defy
i flashes a bl7 rom from defy+ and can't downgrade so i got stuck with a defy ( soc/green lens) with no camera working
thanks to quarx i got my camera back
it's simple flash the latest cm10 nightly from quarx link quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ and you're done
hope it helps you guys
again thx quarx

Thankyou very much, I was looking for that since about 6 months, nothing helped, but this really works with my 'old' defy (green-lens-camera) and bl7.

you're welcome
milou1us said:
Thankyou very much, I was looking for that since about 6 months, nothing helped, but this really works with my 'old' defy (green-lens-camera) and bl7.
Click to expand...
Click to collapse
you're welcome had the same problem as you can see but for a month
searched all forums and tried quarx rom... and i got very excited when i saw it worked and had to post it cause it's kind of a problem with moto not unlocking bootloaders

kmikze89 said:
after a month of searching and flashing and reflashing still couldn't get my camera to work on my defy
i flashes a bl7 rom from defy+ and can't downgrade so i got stuck with a defy ( soc/green lens) with no camera working
thanks to quarx i got my camera back
it's simple flash the latest cm10 nightly from quarx link quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ and you're done
hope it helps you guys
again thx quarx
Click to expand...
Click to collapse
hi,
i have the same problem:
accidentily flashed bl7 on my green lense defy (DFP-231).
now if i try to flash the lastest cm10 as advised, after reboot my defy gets stuck at the red m, right before the boot animation. i can enter the stock recovery, but it does not come as far as the blue led for custom recovery.
any ideas?

Need help !
kmikze89 said:
after a month of searching and flashing and reflashing still couldn't get my camera to work on my defy
i flashes a bl7 rom from defy+ and can't downgrade so i got stuck with a defy ( soc/green lens) with no camera working
thanks to quarx i got my camera back
it's simple flash the latest cm10 nightly from quarx link quarx2k.ru/cm10-2ndboot-nightly-defy(+)/ and you're done
hope it helps you guys
again thx quarx
Click to expand...
Click to collapse
Bro.. I had the same problem (Defy green lens)and was able to fix it with 2nd boot quarx rom and the camera got fixed. Thanks to Quarx and this community ! I had battery drain issues on official GB ROM and my battery would hardly last for 4-5 hrs even when not in use and would be dead in a couple of hours of internet usage over GPRS and would drain close to 50% even on stand by & screen turned off.
Did u experience same issues ? if so, has this been solved after installing this new ROM ?
Did u flash 2.2 (froyo) kernel while installing the new ROM ? coz I'm afraid to do so.. as it might burn my device..

pgraf said:
hi,
i have the same problem:
accidentily flashed bl7 on my green lense defy (DFP-231).
now if i try to flash the lastest cm10 as advised, after reboot my defy gets stuck at the red m, right before the boot animation. i can enter the stock recovery, but it does not come as far as the blue led for custom recovery.
any ideas?
Click to expand...
Click to collapse
is your phone rooted?
did you wipe data, cache, dalvik-cache and battery stats?
do you have custom recovery? cwm?
flah the rom from cutom recovery
p.s. after the firt boot on my defy it stayed around 10 mins on the m logo after that i rebooted it and it worked
hope i was helpfull

snandakishore said:
Bro.. I had the same problem (Defy green lens)and was able to fix it with 2nd boot quarx rom and the camera got fixed. Thanks to Quarx and this community ! I had battery drain issues on official GB ROM and my battery would hardly last for 4-5 hrs even when not in use and would be dead in a couple of hours of internet usage over GPRS and would drain close to 50% even on stand by & screen turned off.
Did u experience same issues ? if so, has this been solved after installing this new ROM ?
Did u flash 2.2 (froyo) kernel while installing the new ROM ? coz I'm afraid to do so.. as it might burn my device..
Click to expand...
Click to collapse
not sure what you are aking but if you have bl7 on your green len dont flah any kernels except the one from quarx if you want the phone to enirely work
as for the drainage iue i ddint have before or after quarx cm10
i dont have my defy anymore
but with 1 hour of talking 2-3 of wifi and 1 of 3g it lasted 2 days
so maybe its just your battery
try to fully charge it
then go to cutom recovery -> advanced -> wipe battery stat
or fully charge it and use from playtore a battery calibration app
bet rgds

snandakishore said:
Bro.. I had the same problem (Defy green lens)and was able to fix it with 2nd boot quarx rom and the camera got fixed. Thanks to Quarx and this community ! I had battery drain issues on official GB ROM and my battery would hardly last for 4-5 hrs even when not in use and would be dead in a couple of hours of internet usage over GPRS and would drain close to 50% even on stand by & screen turned off.
Did u experience same issues ? if so, has this been solved after installing this new ROM ?
Did u flash 2.2 (froyo) kernel while installing the new ROM ? coz I'm afraid to do so.. as it might burn my device..
Click to expand...
Click to collapse
sorry for the spelling i have some issues with my keyboard

kmikze89 said:
not sure what you are aking but if you have bl7 on your green len dont flah any kernels except the one from quarx if you want the phone to enirely work
as for the drainage iue i ddint have before or after quarx cm10
i dont have my defy anymore
but with 1 hour of talking 2-3 of wifi and 1 of 3g it lasted 2 days
so maybe its just your battery
try to fully charge it
then go to cutom recovery -> advanced -> wipe battery stat
or fully charge it and use from playtore a battery calibration app
bet rgds
Click to expand...
Click to collapse
I mean, I have a Defy (Green lens) my phone was updated to Defy+ firmware(official 2.3.6 )by the service center and naturally that screwed up my battery and camera . So I guess I'm on BL7 ROM now. Camera came alive only after installing the CM10 Quarx ROM but the battery life doesn't seem to change much. I'm now on 17/11 ROM coz, heard that this ROM has battery battery backup, not sure how far will it help in my situation bcoz after the 2.3.6 firmware update by service center battery completely screwed up and used to last for half a day at most.
Plz let me know if there is a solution for the battery drain issue that I'm facing. May be a battery fix or something
Thanks and regards
Kishore

snandakishore said:
I mean, I have a Defy (Green lens) my phone was updated to Defy+ firmware(official 2.3.6 )by the service center and naturally that screwed up my battery and camera . So I guess I'm on BL7 ROM now. Camera came alive only after installing the CM10 Quarx ROM but the battery life doesn't seem to change much. I'm now on 17/11 ROM coz, heard that this ROM has battery battery backup, not sure how far will it help in my situation bcoz after the 2.3.6 firmware update by service center battery completely screwed up and used to last for half a day at most.
Plz let me know if there is a solution for the battery drain issue that I'm facing. May be a battery fix or something
Thanks and regards
Kishore
Click to expand...
Click to collapse
never had the battery issue
are you sure your carrier updated your phone to defy+ firmware?
cause if so they should change it for you
do you have dfp 188 / dfp 231 / dfp 2311
check them somewhere in the about phone section from settings
if you have them youre surely on bl7
as for the battery dont know what to say
you can try to contact quarx for more details

kmikze89 said:
never had the battery issue
are you sure your carrier updated your phone to defy+ firmware?
cause if so they should change it for you
do you have dfp 188 / dfp 231 / dfp 2311
check them somewhere in the about phone section from settings
if you have them youre surely on bl7
as for the battery dont know what to say
you can try to contact quarx for more details
Click to expand...
Click to collapse
Bro...
I'm not sure what you are referring to and was unable to find what you have mentioned, but I'm pretty sure that my phone was upgraded to official 2.3.6 ROM by the service center and those f**** will not change it for me. And I'm not sure if at all it would be possible to go back to froyo as it was upgraded to official GB ROM.
Is there a way out ... any ideas
Regards
Kishore

snandakishore said:
Bro...
I'm not sure what you are referring to and was unable to find what you have mentioned, but I'm pretty sure that my phone was upgraded to official 2.3.6 ROM by the service center and those f**** will not change it for me. And I'm not sure if at all it would be possible to go back to froyo as it was upgraded to official GB ROM.
Is there a way out ... any ideas
Regards
Kishore
Click to expand...
Click to collapse
if its defy+ rom you should see mb526 at your model number you cannot downgrade it
not untill the bootloader is unlocked and there are minimal chances
the only way is to stay on quarx's cm10
as for the battery drainage problem try to calibrate it

solved battery drain !!!
snandakishore said:
Bro.. I had the same problem (Defy green lens)and was able to fix it with 2nd boot quarx rom and the camera got fixed. Thanks to Quarx and this community ! I had battery drain issues on official GB ROM and my battery would hardly last for 4-5 hrs even when not in use and would be dead in a couple of hours of internet usage over GPRS and would drain close to 50% even on stand by & screen turned off.
Did u experience same issues ? if so, has this been solved after installing this new ROM ?
Did u flash 2.2 (froyo) kernel while installing the new ROM ? coz I'm afraid to do so.. as it might burn my device..
Click to expand...
Click to collapse
******************
just make a new google account and use only the new account.
i had the this problem and now the phone is working fine.
Cristi Bazavan -Defy 525 with full 526-2.3.6 bl7-NOW cm10-2nd init-green lens

Need a Stable 2nd Boot Quarx ROM or any other compatible ROM
cri1410sti said:
******************
just make a new google account and use only the new account.
i had the this problem and now the phone is working fine.
Cristi Bazavan -Defy 525 with full 526-2.3.6 bl7-NOW cm10-2nd init-green lens
Click to expand...
Click to collapse
Hi Brother, It's been a loong time now.. but if you are still active here, could you please help me out with a stable 2nd boot Quarx ROM or any other stable 2nd boot ROM that works for me? As I'm still running on Nightlies (Sept 30th) and development on this is going painfully slow...: well can't complain though.. I just need something more stable.. the nightlies have some lag and the devices seems to be too slow even when not using data. I just want to put a stable OS on this and keep this aside.
Thanks for all the help from this community.. Really greatfull

Related

[Q] Defy ICS = battery not charging

Hi forums,
Last night, i upgraded to ICS. Everything went smooth.. First i install the CM9 kernal, then ICS, following latest gapps. Looks awesome .. I was so hyped, i left it in charge and went to sleep. This morning, i see my phone dead. I took out the battery and put it in charger again. All i get is battery logo with question mark. then i connected to my pc, after about every \ 10mins it turns on, then turns off after 1min???
I tried to look for solution, mostly suggest to use RSD Lite and go back to Froyo 2.2.2 but my phone barely turns on for 1min then goes off.
The other solution suggested to cut out a usb cable and connect it between the battery and the phone. I tried it but no luck yet.
Maybe the battery is dead? if not, any other solution?
thanks!
EDIT: nevermind: this solution worked!
http://forum.xda-developers.com/showthread.php?t=892026
This is very common issue for which you could have found the solution very easily had you scanned through cm9 threads. Basically there is a battery fix which you can flash it through cwm recovery.
enjoy, hit thanks if I had helped you.
Sent from my MB526 using XDA App
I had the same problem I just bought 2 new batteries and a universal battery charger and BOOM fixed
Sent From My SGP 5.O
premaca said:
This is very common issue for which you could have found the solution very easily had you scanned through cm9 threads. Basically there is a battery fix which you can flash it through cwm recovery.
enjoy, hit thanks if I had helped you.
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
do you use this if you have a Regular Defy with a GB kernel and are using a CM9 built for defy+??
chachoi said:
do you use this if you have a Regular Defy with a GB kernel and are using a CM9 built for defy+??
Click to expand...
Click to collapse
Yes. I created this fix for regular Defy with red lense, running ICS on GB kernel - no matter if it is Quarx or Epsylon3's build - works on all of them.
does this work on defy green lense too?
Auris 1.6 vvt-i said:
Yes. I created this fix for regular Defy with red lense, running ICS on GB kernel - no matter if it is Quarx or Epsylon3's build - works on all of them.
Click to expand...
Click to collapse
does this work on defy green lense too?
Auris 1.6 vvt-i said:
Yes. I created this fix for regular Defy with red lense, running ICS on GB kernel - no matter if it is Quarx or Epsylon3's build - works on all of them.
Click to expand...
Click to collapse
I flashed ICS in my Defy+, but dint face this issue of battery not charging! Was I simply lucky or something else?!
For me with Defy+ the maximal battery level with Epsylon3's ICS could be reached is 91%
badboy47 said:
Hi forums,
Last night, i upgraded to ICS. Everything went smooth.. First i install the CM9 kernal, then ICS, following latest gapps. Looks awesome .. I was so hyped, i left it in charge and went to sleep. This morning, i see my phone dead. I took out the battery and put it in charger again. All i get is battery logo with question mark. then i connected to my pc, after about every \ 10mins it turns on, then turns off after 1min???
I tried to look for solution, mostly suggest to use RSD Lite and go back to Froyo 2.2.2 but my phone barely turns on for 1min then goes off.
The other solution suggested to cut out a usb cable and connect it between the battery and the phone. I tried it but no luck yet.
Maybe the battery is dead? if not, any other solution?
thanks!
EDIT: nevermind: this solution worked!
http://forum.xda-developers.com/showthread.php?t=892026
Click to expand...
Click to collapse
i too faced the similar problem, was staying in recovery with adapter connected! Boom took a risk..flashed cm7.1 started the phone..charged it and again flash cm9
---------- Post added at 03:08 AM ---------- Previous post was at 03:02 AM ----------
premaca said:
This is very common issue for which you could have found the solution very easily had you scanned through cm9 threads. Basically there is a battery fix which you can flash it through cwm recovery.
enjoy, hit thanks if I had helped you.
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
is there any battery fix for green lens defy??
[q] defy plus battery fix
Auris 1.6 vvt-i said:
Yes. I created this fix for regular Defy with red lense, running ICS on GB kernel - no matter if it is Quarx or Epsylon3's build - works on all of them.
Click to expand...
Click to collapse
i am very new to all this, jus rooted my phone, installed CM9, CM9-NIGHTLY-120428-Defy+ on my defy plus , red lense, with boot loader 7. im having battery issues , it stays on 82 % and doesnt get charged more than that and drains very easily. where do i get my hands on the battery fix?? the link to drop box is not working, says the acc is disabled, and can i flash this battery fix irrespective of the nightly version?? pls help!!
Battery fix is not for your phone. You have a Defy+ (MB526) and this fix is for MB525 - regular Defy with red lense. Find my tutorial for Quarx's Defy/Defy+ CM9 builds and flash the latest build. The one you are using is pretty old
Help battery dont charge
See this screenshot.........i am charging my cell and it is showing also its charging but not even d graph nor the battery icon is increasing .
Seriously help me
I am on CM10.2...i cant understand whats wrong

Help green lens battery is (?) bootloader 7

I have a Defy MB525 FUll Flashed DFP231 (GB Kernels) does not work charging the battery (the question mark is displayed on battery icon). I tried to install CM9 (for Defy MB525) - the system will not start. I tried to install CM9 Defy MB526 - it works, but not charging the battery (the battery icon is displayed properly, when you connect the charger is displayed if started charging, but in reality the phone not charging
. I tried to put the GB Kernels for CM9 - bootloader error. I tried to put the Battery fix for Red Lense - does not help.
THE DREADED INVALID BATTERY!
i have the '?' and nothing works to fix it, although mine is caused by macgyver.
can anyone tell me if this would work on a defy? and post pictures?
http://www.mod2xtreme.com/showthread.php?t=10487
Froyo kernel for green lens bootloader 7 ?
any news?
You can flash eplsy's defy+ build. Or use battery fix (search a bit)
No hopes for camera.
Sent from my MB525 using XDA
I Flash CM7 & CM9 Build For Defy+ .
Didnt Worked battery and camera.
Froyo CM7 and GB kernel CM9 kernel --> Bootloader Error.
I want just my battery back!
For CM9, use the builds from epsy (they suppose to have the right files for the defy). Or use the search function (something like 'battery fix').
For CM7 there are also zip files. You should we able to find them (maybe with Google).
Sent from my MB525 using XDA
Why people don't read before flashing sbfs?
walter79 said:
4.5.1-134-DFP-231 - retail, vodafon, tmobile, O2, full Blur ROOT? downgrade no! Maybe MB525(Defy) battery did not work!
Click to expand...
Click to collapse
someone told me maybe my battery dead when i try mcgyver .
that true?
i buy new battery Hf5x for DEfy green lens.
and again no charge!
what i can do Now?
jalal-jap said:
someone told me maybe my battery dead when i try mcgyver .
that true?
i buy new battery Hf5x for DEfy green lens.
and again no charge!
what i can do Now?
Click to expand...
Click to collapse
The only way I got the HF5X Defy+ Battery to get fully charged on the Defy(Green Lens) was to flash a GB Kernel like 4.5.3-109_DPP-11 an install Defy+ "battd" & "libbattd.so" like in this thread.
Only problem I got was no working camera. Tried Greenbread mod which brought me back camera but do not work with HF5X batttery.
So maybe try the 4.5.3-109_DPP-11 kernel with battd patch.
Kind Regards,
mpeg
if i try any kernel I have bootloader error!
i think boot.img from froyo kernel solve my problem.
but when try that on Defy Green 2.3.6-231 bootloader 7 --> Bootloader error!
if you already flash bl7 sbf onto your phone, then the only stock firmwares will work /dfp231, dfp188 = bl7/
I buy new battery put in on phone and again Invalid Battery !
wipe data
wipe cash
flash ic redlens battery fix
flash battery fix for white rabbit eddition
NOT WORKED
I test in CM9 & Stock Firmware (rooted 2.3.6). Battery always (?)
I am going to crazy!
First you must know that you are stucked in bl7 and can not downgrade to froyo at the moment. But I am convinced that if you use the battd & libbattd.so from defy+ stock rom, set the permissions like the old ones and delete everything in /data/battd the HF5X will be charged full.
I brought the Hf5X fully charged on MS2Ginger 3 and 4 on 4.5.3.109 kernel and files mentioned above. I am using a defy (green lens). Camera not function at this kernel.
Kind regards
mpeg
Thanks for replay .
I gust I need boot.img from froyo kernel.
I cant use any kernel in BL7 ---> bootloader error.
I use both of Battery (BF5X & HF5X ). Not Worked.
Maybe my battery IC DEAD!?
If your battery ic would be dead than you could not power on your phone without power cord.The battery charge process is handled though software. I think it is a software/kernel incompability.
Because you are stucked in bl7 try to flash defy+ stock sbf. Maybe try some battery fixes for gb kernel.
Don't forget to wipe data/cache, dalvik cache. If this doesn't work try Motorola build in factory
reset.
Kind regards
mpeg
Maybe this helps you http://forum.xda-developers.com/showthread.php?t=1413214
that bootloader is 5.
i am on bootloader 7!
not worked.
no way for solve battery problem for bl7?
On witch rom are you now?
Verstuurd van mijn MB525 met Tapatalk

ROM Builds for Motorola Defy (Bayer / Red)

H! Guys,
After months of flashing i discovered (N00b :silly that i can flash Defy+ builds on my Defy (Red) and use Kernel - 4.5.2_DHT-22 and i get Battery life of more than 30 Hrs.....
So i just wana confirm i can flash any Defy+ build (CM7/ ICS / CM10) and use above kernel ???
ashish386 said:
H! Guys,
After months of flashing i discovered (N00b :silly that i can flash Defy+ builds on my Defy (Red) and use Kernel - 4.5.2_DHT-22 and i get Battery life of more than 30 Hrs.....
So i just wana confirm i can flash any Defy+ build (CM7/ ICS / CM10) and use above kernel ???
Click to expand...
Click to collapse
Yes, I'm using Quarx's Defy+ CM9 on my red lens Defy with the kernel and it's working great and I get more than 48 hours of battery life with normal use.
defydent said:
Yes, I'm using Quarx's Defy+ CM9 on my red lens Defy with the kernel and it's working great and I get more than 48 hours of battery life with normal use.
Click to expand...
Click to collapse
Thanks for the reply....
Another issue is i flashed CM7 Defy+ (Fuzz Build) i can boot but battery shows ? icon..... Can u pls provide me Battery fix for CM7.
ashish386 said:
Thanks for the reply....
Another issue is i flashed CM7 Defy+ (Fuzz Build) i can boot but battery shows ? icon..... Can u pls provide me Battery fix for CM7.
Click to expand...
Click to collapse
In Defy > General forum there's a thread about Quarx CM9 builds for Froyo and GB kernel. In the first post there's a patch for Defy red lens using Defy+ roms. I suggest you can try that. Did you took a nandroid backup before flashing that rom, if the patch does not work, try restoring it. I have never faced the battery issue, probably because I used Quarx's CM7 builds. Never tried Fuzz's, and now am scared to..
Here's the link

Battery Fix Red Lense cm7.2 defy+

can someone link me to a battery fix for the plus version of cm7.2 made by quarx? im currently using a red lense defy, and I CANT find the f*cking battery fix for red lense in cm7 really.. I only find for cm10 and cm9 battery fixes!
mariosanoguera said:
can someone link me to a battery fix for the plus version of cm7.2 made by quarx? im currently using a red lense defy, and I CANT find the f*cking battery fix for red lense in cm7 really.. I only find for cm10 and cm9 battery fixes!
Click to expand...
Click to collapse
have you tried the cm9 and cm 10 ones? I think they should work...
B4ast1 said:
have you tried the cm9 and cm 10 ones? I think they should work...
Click to expand...
Click to collapse
they released a new battery fix for cm10 because its located in another place or something?
I will try with cm9 battery fix since the cm10 doesnt work
mariosanoguera said:
I will try with cm9 battery fix since the cm10 doesnt work
Click to expand...
Click to collapse
Did this work?
And if so could I please ask your opinion? I also have a red lens defy. I am on Epsylon3's froyo kernel and using Quarx's CM10. I want to go back to CM7.2 and want to use Quarx's nightly that has 720p recording. Do I need to flash a GB kernel and use the defy+ build for 720p to work, or can I stay on the froyo kernel and use the defy build? The reason I want to stay on froyo kernel is that I don't want the battery issues.
I tried a CM7 Defy+ build on my Defy Red Lens, used a battery fix I got from the ParanoidAndroid dev forum and it kinda worked. I say kinda cuz when I try to reboot it actually powers off and cannot get on til a battery pull, but everything else is OK
m0ndul said:
I tried a CM7 Defy+ build on my Defy Red Lens, used a battery fix I got from the ParanoidAndroid dev forum and it kinda worked. I say kinda cuz when I try to reboot it actually powers off and cannot get on til a battery pull, but everything else is OK
Click to expand...
Click to collapse
Thanks did you have to flash a GB kernel, or did you stay on the froyo kernel?
I flashed the GB kernel, didn't tried the froyo kernel though, it normally bootloops with defy+ roms
Sent from My Moto Defy
I have a CM9 GB kernel on defy red lens, wanted to install CM7 Defy + as multiboot. But my Cm7 shows a '?' for the battery status icon. Tried Battery fix for 1500mah defy red lense also tried ICS red lense batt fix but no use.
Battery fix
This is battery fix for Defy+ (MB526)
Install via "flash .zip" in the recovery them restart your phone
If it don't work, it's that the kernel had changed so, re-install attached kernel also by "flash .zip" in recovery system, restart your phone and you will see the battery's percentage.
euros60 said:
This is battery fix for Defy+ (MB526)
Install via "flash .zip" in the recovery them restart your phone
If it don't work, it's that the kernel had changed so, re-install attached kernel also by "flash .zip" in recovery system, restart your phone and you will see the battery's percentage.
Click to expand...
Click to collapse
Tried it but still no battery status. Maybe i have a froyo sbf flashed earlier and then I installed MIUI/WIUI n then installed the CM9 GB with GB kernel. Anyways dont want to do a fixed sbf +nandroid now and redo everything will try to get a CM10 Gb working.

Answer : How to custom Kernel ´Defy+ JB Quarx

Everything for testing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I wrote this for maybe less confusion
Works with my Defy - red lense Bayer cam - on Defy+(gingerbread Kernel) Jelly Bean Quarx 24.8 Rom
I´ve
1. Flash test_2ndboot_6.10.zip from http://quarx2k.ru/ or my 2ndboot_06.10.zp from attached dropbox (search for 2ndInit recovery if you dont have and root your defy)
2. Boot into Recovery
3. Set 2ndboot as default
4. Go to tools/adb daemon and klick it and then reboot
If you want to go back to stock gb kernel flash stock kernel -like gb-234-451-134-signed.zip from dopbox i´ve attached
Remember everything is for Test the custom kernel
OT - Multiboot is ok with CM7 but akku is always 100%
https://www.dropbox.com/sh/4fg71wuehyibzzx/oanepGgaRR
BIGNOTE: Green lens users who flashed redlens builds please dont try using flash, you will end up burning it like me and many others
Big thanks to our great DEV´s Quarx as porter :good: , Walter for fixing :good: and MS2 Dev czechop who made this possibile :good:
Great works men !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
Hi, i tried all the methods without sucess... Alldays the same: blue led then red and stuck at moto logo. Any ideas?
Sorry for my english and thanks in advance
Redhotero said:
Hi, i tried all the methods without sucess... Alldays the same: blue led then red and stuck at moto logo. Any ideas?
Sorry for my english and thanks in advance
Click to expand...
Click to collapse
Defy or Defy+ ?
bone101 said:
Defy or Defy+ ?
Click to expand...
Click to collapse
Defy red lens with defy + build gb kernel
Sent from my MB526 using xda premium
I have done it in such manner
1. Prepared on SD card:
- CM10 ROM 24/09 for MB526,
- gapps for JB
- Qkernel 2ndboot_06.10.zip (with improved 2ndboot.ko)
2. Done factory reset and viped caches
3. Installed CM10 and gapps in normal manner
4. Flashed Qkernel
5. Went to bootmenu and choosed 2nd-boot (there was no chance to set it as default... i think, because phone immediately reboots)
And achieved "half success". All is working but with extremely lags... Was said so after first bootup system suppose to be laggy and needs to wait some time on sleep state with WiFi switched off. I was waiting whole night.
So now I want to know, if my procedure is right.
Nobody mentions gapps during instali of ROM - i suppose it's so trivial so nobody count it on...
Another problem - is there need of factory reset or cache wipe?
After installing Qkernel i went to boot menu to set 2nd-boot as default, but when i choose 2nd-boot phone reboots and I don't know what now with this setting up deafult 2nd-boot...
I am trying to fond any reason of system lagginess. Maybe something was done wrong. What's your opinion? To change ROM build? Or something else...
Redhotero said:
Defy red lens with defy + build gb kernel
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
You can try it with the kernel from my drop box
I nerver wiped anything
For me it works as I've done
http://forum.xda-developers.com/showthread.php?t=1542956
bone101 said:
You can try it with the kernel from my drop box
Click to expand...
Click to collapse
Of course I can try, but does it make any difference? Well, will see...
So I'm supposed to flash your kernel "as is" without much deliberation over existing installation?
If you are on boot loader ver 7 i cant say that it would work
Some peoples in this
http://forum.xda-developers.com/showthread.php?p=32535395
Wrote about problems with custom kernel . Look around page 67 if your defy+ was stock bl7
I am using regular Defy with Bayer module and as first owner I am sure so there was not flashed any full sbf except once when I was forced to flash stock Froyo, so there is no case of BL7 I think...
So if I try can I flash this kernel over existing system or should I reflash ROM too?
bone101 said:
You can try it with the kernel from my drop box
Click to expand...
Click to collapse
Tried without success. Ill have to flash sbf rigth? Which do you recommend?
what are the advantages of using this kernel?
I don't know the advantage, for me it works as i do.
I started with stock cee European gingerbread which I've flashed after offical update comes out
New nightley from quarx cm10-2ndboot-nightly-defy(+)
Is out & works a bit faster
bone101 said:
I don't know the advantage, for me it works as i do.
I started with stock cee European gingerbread which I've flashed after offical update comes out
New nightley from quarx cm10-2ndboot-nightly-defy(+)
Is out & works a bit faster
Click to expand...
Click to collapse
Flashed new nightly and problems are gone
Redhotero said:
Flashed new nightly and problems are gone
Click to expand...
Click to collapse
thank to quarx
trurl3 said:
I am using regular Defy with Bayer module and as first owner I am sure so there was not flashed any full sbf except once when I was forced to flash stock Froyo, so there is no case of BL7 I think...
So if I try can I flash this kernel over existing system or should I reflash ROM too?
Click to expand...
Click to collapse
In General section http://forum.xda-developers.com/showthread.php?t=1909242&page=84
they talk about BL5 and BL6 is supportet by quarx not BL4 and BL 7
Some say it works on BL7
But better read there for your self.......beforr you flash anything and think about warrity/garantie
For every booting i had to umount and mount again the battery.
And no Deep-Sleep in about 12 hours
Anyone else with this problems?
---------- Post added at 09:37 AM ---------- Previous post was at 08:49 AM ----------
Now Deep-Sleep is ok. Dont know why .... But ... Quarx said in the xda-developer thread,
that with no usb-cable and with wifi disabled the defy should go 10-15 sec. in deep-sleep.
Before i have had usb-cable on or wifi enabled. Maybe that has been the reason.
After 3 hours 14 % battery drain ... not good ...
Quarx edited a new Rom today.
But after getting more and more slow reactions from the defy+ i flashed the 24.09 version.
All tips didn't really work in a good way.
And I need my defy+ functionabel this days.
But next time again ...
And today again a new kernel for update as *.zip ...
quarx2k.ru/cm10-2ndboot-nightly-defy(+)/update_for_11.10_v2.zip
13.10 Kernel update:fix wifi tether(reboot), reduce battery drain, compiled with linaro 4.5, fix charge only mode, cleanup unused drivers.

Categories

Resources