Related
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Do you still see the blue led for custom recovery?
Hmetool said:
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Click to expand...
Click to collapse
You will need to flash a new SBF with RSD lite
follow instructions in this thread
How to flash new SBF
Hmetool said:
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Click to expand...
Click to collapse
Do not flash any sbf's. Reboot the phone, at the blue led press Vol- and when you get into boot menu, flash the correct kernel. If you flashed Defy build, flash CM7 (Froyo) kernel. If you flashed the Defy+ build, flash CM9 (Bingerbread) kernel.
fiskenigaten said:
Do you still see the blue led for custom recovery?
Click to expand...
Click to collapse
I see the blue led, but it goes on to green regardless of what I do (power+voldown does nothing). I've tried to access recovery mode several times, but the phone doesn't respond. Maybe I'm doing something wrong.
rperdue5 said:
You will need to flash a new SBF with RSD lite
follow instructions in this thread
How to flash new SBF
Click to expand...
Click to collapse
I've read the guide, but my original SBF is missing ever since MegaUpload's demise. Is it possible to use the Nandroid backup instead?
Auris 1.6 vvt-i said:
Do not flash any sbf's. Reboot the phone, at the blue led press Vol- and when you get into boot menu, flash the correct kernel. If you flashed Defy build, flash CM7 (Froyo) kernel. If you flashed the Defy+ build, flash CM9 (Bingerbread) kernel.
Click to expand...
Click to collapse
Ok, apparently I wasn't pressing the button at the right time. Recovery mode is now working. However, I don't have the correct kernel in my SD card - only the wrong one.
My Nandroid backup seems not to be working too, apparently. I went into recovery and restored it, but boot still doesn't work. I wiped data/cache/dalvik cache and tried again, but it still didn't work. I'm at a loss here.
Should I try to flash some other sbf, since I can't find my phone's stock one?
Hmetool said:
Ok, apparently I wasn't pressing the button at the right time. Recovery mode is now working. However, I don't have the correct kernel in my SD card - only the wrong one.
My Nandroid backup seems not to be working too, apparently. I went into recovery and restored it, but boot still doesn't work. I wiped data/cache/dalvik cache and tried again, but it still didn't work. I'm at a loss here.
Should I try to flash some other sbf, since I can't find my phone's stock one?
Click to expand...
Click to collapse
go to ICS thread and on the first post there is a link to signed CM7 kernel zip..copy it to ur sd card and flash it..
arpith.fbi said:
go to ICS thread and on the first post there is a link to signed CM7 kernel zip..copy it to ur sd card and flash it..
Click to expand...
Click to collapse
I just tried installing the zip from the sdcard, but I got an error message: "Can't make /tmp/update_binary. Installation aborted". It seems that I can't install any zip now.
Is there any way out of that? I'd be more than happy if I could just flash my nandroid backup, even if that means being stuck without ICS for a bit more time.
I'm on ClockworkMod Recovery v2.5.1.8, if that helps.
Hmetool said:
I just tried installing the zip from the sdcard, but I got an error message: "Can't make /tmp/update_binary. Installation aborted". It seems that I can't install any zip now.
Is there any way out of that? I'd be more than happy if I could just flash my nandroid backup, even if that means being stuck without ICS for a bit more time.
I'm on ClockworkMod Recovery v2.5.1.8, if that helps.
Click to expand...
Click to collapse
Hi,
I faced a similar issue but it was since I flashed CM9 for Defy in my Defy+ with 2.3.6(stock) ! Nothing was working and I would get some boot errors! I rectified it by flashing full SBF and then rooting. Well if you want I can provide you with the SBF I have but it is for 2.3.6 and so you will loose downgradability. I have 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage with me. However, you can also give Walter's fixed SBF and Nandroid backup a try
Thanks, it turns out that flashing a sbf was a nice way out of this mess. I flashed a 2.2.2 which is almost identical to my stock rom (couldn't find that one).
If I root my phone now, can I still try to restore my nandroid backup? Or should I just skip that and try flashing ICS again?
My SD card has the 03-19 CM9 Nightly, gapps and both CM9 and CM7 signed kernels. Should that suffice? CM7 kernel is the right one for green lens defy, right?
Hmetool said:
Thanks, it turns out that flashing a sbf was a nice way out of this mess. I flashed a 2.2.2 which is almost identical to my stock rom (couldn't find that one).
If I root my phone now, can I still try to restore my nandroid backup? Or should I just skip that and try flashing ICS again?
My SD card has the 03-19 CM9 Nightly, gapps and both CM9 and CM7 signed kernels. Should that suffice? CM7 kernel is the right one for green lens defy, right?
Click to expand...
Click to collapse
If you are on a green lensed Defy, then yes - flash CM7 signed kernel and one of the Froyo bulds of Quarx or Epsylon3 - try them all if you wish and see which one you like the most.
Procedure is easy:
1. Full wipe
2. Flash CM7 kernel
3. Flash ROM
4. Flash gapps
5. Full Wipe
6. Reboot
When you decide to try a new ROM, there is no need to flash the kernel again, just wipe, flash the new ROM and gapps and then wipe again.
Auris 1.6 vvt-i said:
If you are on a green lensed Defy, then yes - flash CM7 signed kernel and one of the Froyo bulds of Quarx or Epsylon3 - try them all if you wish and see which one you like the most.
Procedure is easy:
1. Full wipe
2. Flash CM7 kernel
3. Flash ROM
4. Flash gapps
5. Full Wipe
6. Reboot
When you decide to try a new ROM, there is no need to flash the kernel again, just wipe, flash the new ROM and gapps and then wipe again.
Click to expand...
Click to collapse
Thanks, that's great. Are all regular Defy roms Froyo builds unless stated otherwise? I couldn't find that info on the files I have.
One question: by full wipe you mean data/cache/dalvik cache or is there anything else that I'm missing?
Hmetool said:
Thanks, that's great. Are all regular Defy roms Froyo builds unless stated otherwise? I couldn't find that info on the files I have.
Click to expand...
Click to collapse
Yes, "Defy build" means Froyo kernel based, "Defy+ build" means GB kernel based.
Hmetool said:
One question: by full wipe you mean data/cache/dalvik cache
Click to expand...
Click to collapse
Exactly.
Auris 1.6 vvt-i said:
Yes, "Defy build" means Froyo kernel based, "Defy+ build" means GB kernel based.
Exactly.
Click to expand...
Click to collapse
Yep, that's exactly what it is..
I've just rooted my phone again, followed the steps and installed CM9. It worked like a charm. I was pleasantly surprised at how smoothly it runs, didn't expect that sort of quality from a Nightly. Awesome.
Thanks a lot for saving my phone, guys.
Hmetool said:
I've just rooted my phone again, followed the steps and installed CM9. It worked like a charm. I was pleasantly surprised at how smoothly it runs, didn't expect that sort of quality from a Nightly. Awesome.
Thanks a lot for saving my phone, guys.
Click to expand...
Click to collapse
Sounds great Well since CM9 nightly is still a long way to go, you may want to dual boot CM7 and CM9. Install CM7 as primary and dual boot to CM9.
Guide: http://forum.xda-developers.com/showthread.php?t=1375156
i did the same thing on my defy im a noob and need alor of help.
Ok so i had a motorola defy and i wanted to update it to cyanogenmod 7 but it must have been the wrong one and now its stuck on google boot i can't get to my custom recovery screen by pressing volume - and power buttons and if i press volume + i get this black screen asking to plug in the usb to the laptop which i did but i don't know what to do now. i need complete instructions! , iv checked ALOT of forums and tried following this ones instructions, but RSD lite wont download and install like it said it would . and i have no idea how to get tmobile android 2.2 OS for motorola defy. if i could just get that back i would be more then forever greatfull . please someone HELP ! please all be forever in debt to whoever can help me.
blackhack516 said:
Ok so i had a motorola defy and i wanted to update it to cyanogenmod 7 but it must have been the wrong one and now its stuck on google boot i can't get to my custom recovery screen by pressing volume - and power buttons and if i press volume + i get this black screen asking to plug in the usb to the laptop which i did but i don't know what to do now. i need complete instructions! , iv checked ALOT of forums and tried following this ones instructions, but RSD lite wont download and install like it said it would . and i have no idea how to get tmobile android 2.2 OS for motorola defy. if i could just get that back i would be more then forever greatfull . please someone HELP ! please all be forever in debt to whoever can help me.
Click to expand...
Click to collapse
Try running three setup as administrator. Read all in defy guide. Check the wiki for more guides.
Sent from my MB525 using XDA
do u have a link?
labsin said:
Try running three setup as administrator. Read all in defy guide. Check the wiki for more guides.
Sent from my MB525 using XDA
Click to expand...
Click to collapse
do u have a link
Hi!
I accidentally installed GB Kernel and CM9 on my DEFY with green lens.
The camera is not working as we all know..
Is there any way I can downgrade the kernel and install CM9 with froyo kernel??
This is bothering me for some time, I was browsing the forum for ages, with no solution
Thanks for any help!:good:
did u just flash a file tiny file or did u flashed a sbf? i guess delete date in custom recovery if u did the first thing. not sure though..
How could you be so irresponsible? Always get all the information before trying anything. I think you can't downgrade.i
S3nt fr0m my D3fy/w1u1 GB st4BL3
regenboognl said:
did u just flash a file tiny file or did u flashed a sbf? i guess delete date in custom recovery if u did the first thing. not sure though..
Click to expand...
Click to collapse
This is the answer!
SBF Flash. Or wipe data/caché + CM7 (Froyo) Kernel flash.
Also check your bootloader version, that's not downgradeable :/.
nikola986 said:
Hi!
I accidentally installed GB Kernel and CM9 on my DEFY with green lens.
The camera is not working as we all know..
Is there any way I can downgrade the kernel and install CM9 with froyo kernel??
This is bothering me for some time, I was browsing the forum for ages, with no solution
Thanks for any help!:good:
Click to expand...
Click to collapse
by that you mean you installed the .zip of the GB kernal or you flashed one of the GB's SBF?
if you didnt flash SBF id recommend you to flash 3.4.2_179-002(only if your phone came stock with froyo), dont forget to full wipe before flash and just than start updating to CM9 from step1 again. I recommend you on eppy's build, its really good.
Cman41 said:
by that you mean you installed the .zip of the GB kernal or you flashed one of the GB's SBF?
if you didnt flash SBF id recommend you to flash 3.4.2_179-002(only if your phone came stock with froyo), dont forget to full wipe before flash and just than start updating to CM9 from step1 again. I recommend you on eppy's build, its really good.
Click to expand...
Click to collapse
I have installed the CM9 (for defy+ and red lence defy), and than the KERNEL for GB... (CM9 Kernel, GB, for DEFY+)
Thanks everyone for the info and replies!
ps.
Core version: 2.6.32.9-ge281b6e
nikola986 said:
I have installed the CM9 (for defy+ and red lence defy), and than the KERNEL for GB... (CM9 Kernel, GB, for DEFY+)
Thanks everyone for the info and replies!
ps.
Core version: 2.6.32.9-ge281b6e
Click to expand...
Click to collapse
what rom did you have before you tried installing cm9? stock froyo?
Cman41 said:
what rom did you have before you tried installing cm9? stock froyo?
Click to expand...
Click to collapse
CM 7
First perform a full wipe and then flash this SBF: http://sbf.droid-developers.org/umts_jordan/JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf.gz
You will be back to a froyo and than to install CM9 follow the steps here: http://forum.xda-developers.com/showthread.php?t=1756234
good luck
I have flashed the SBF you gave me.. It justs says: PASS.. I cannot start the phone..
RSD says that the bootloader version is 0910
Is there any solution??
nikola986 said:
I have flashed the SBF you gave me.. It justs says: PASS.. I cannot start the phone..
RSD says that the bootloader version is 0910
Is there any solution??
Click to expand...
Click to collapse
what do you mean? it just should have re booted into froyo.. are you stuck in some bootloop? if so did you wipe?
Cman41 said:
what do you mean? it just should have re booted into froyo.. are you stuck in some bootloop? if so did you wipe?
Click to expand...
Click to collapse
When I flash it with RSD Lite, It seems okey, it does the job, at the end it says PASS (on the PC in the app)
Then, I unplug the phone from the PC and try to power it, nothing happens.. I can plug it back to the RSD lite and it detects the phone so I can flash it again..
nikola986 said:
When I flash it with RSD Lite, It seems okey, it does the job, at the end it says PASS (on the PC in the app)
Then, I unplug the phone from the PC and try to power it, nothing happens.. I can plug it back to the RSD lite and it detects the phone so I can flash it again..
Click to expand...
Click to collapse
but didnt the phone boot normally into froyo? i suggest you not to unplug untill phone boots up. If you are stuck in boot loop go to stock recovery by: hold vol down+power up>wait until triangle with '!' mark appears>push vol down and up at the same time> wipe and reboot
The phone was flashed but it did not boot at all.. It cant be turned on after the flash is done.. it can be just reflashed again via cable
nikola986 said:
The phone was flashed but it did not boot at all.. It cant be turned on after the flash is done.. it can be just reflashed again via cable
Click to expand...
Click to collapse
if you just push the power button the phone is getting into bootloader mode? are you sure volume up isnt pressed somehow?
Cman41 said:
if you just push the power button the phone is getting into bootloader mode? are you sure volume up isnt pressed somehow?
Click to expand...
Click to collapse
The sreen is completely black, but I can flash it over the PC...
Well.. you should try flashing it again... and the phone should boot into froyo normally when you finish flashing.
Nearly at the end of the process you should see RSD lite telling you:"Phone is being rebooted" and percentage under the progress column, and if you look on your phone you will see it booting up(M logo, then Android logo and then froyo.. normally).
By the way:what was your stock build and if you dont know it, where are you from??
Cman41 said:
Well.. you should try flashing it again... and the phone should boot into froyo normally when you finish flashing.
Nearly at the end of the process you should see RSD lite telling you:"Phone is being rebooted" and percentage under the progress column, and if you look on your phone you will see it booting up(M logo, then Android logo and then froyo.. normally).
By the way:what was your stock build and if you dont know it, where are you from??
Click to expand...
Click to collapse
maybe he has a 2.3.6 sbf installed previously i had same problem cant downgrade i guess
Why did Motorola make that defy + -.-
Sent from my MB525 using xda app-developers app
gaimle said:
maybe he has a 2.3.6 sbf installed previously i had same problem cant downgrade i guess
Click to expand...
Click to collapse
i assumed he was on froyo since he had CM7
NI55AN said:
Why did Motorola make that defy + -.-
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Simple: To make bigger profit!
Thats why im not buying moto phone again mate. Though i love the cm9, i dont know what we would have done without it..
So, I posted before about wanting to flash a custom rom to my newly bought Milestone2. Sadly, no replies.
My problem now is that I have rooted, did the droid2bootstrap and then flashed Bootmenu via CWM, downloaded the MS2GINGER 4.0 with the kernel update and baseband switcher and the blur apps.
I boot into recovery fine, wipe/factory reset works. Clears the cache. But when I try to restore the system of the Ms2ginger, it says that the md5's dont match. Can anyone tell me what to do to get this rom working on my Milestone2?
Darin_Ram said:
So, I posted before about wanting to flash a custom rom to my newly bought Milestone2. Sadly, no replies.
My problem now is that I have rooted, did the droid2bootstrap and then flashed Bootmenu via CWM, downloaded the MS2GINGER 4.0 with the kernel update and baseband switcher and the blur apps.
I boot into recovery fine, wipe/factory reset works. Clears the cache. But when I try to restore the system of the Ms2ginger, it says that the md5's dont match. Can anyone tell me what to do to get this rom working on my Milestone2?
Click to expand...
Click to collapse
You can try this fix: http://forum.xda-developers.com/showthread.php?t=714114
Works in linux, if you have windows, you're gonna have to find md5sum somewhere else.
Hope it helps :good:
Thank you!!!!!!!
Lean946 said:
You can try this fix: http://forum.xda-developers.com/showthread.php?t=714114
Works in linux, if you have windows, you're gonna have to find md5sum somewhere else.
Hope it helps :good:
Click to expand...
Click to collapse
Thanks man! I appreciate it. I have one more question though, for the ms2ginger, the kernel update cant be downgraded to froyo afterwards?
I've been reading but I havent really tried anything. I just (literally, 5 minutes ago) flashed the CM7 on the phone.
Darin_Ram said:
Thanks man! I appreciate it. I have one more question though, for the ms2ginger, the kernel update cant be downgraded to froyo afterwards?
I've been reading but I havent really tried anything. I just (literally, 5 minutes ago) flashed the CM7 on the phone.
Click to expand...
Click to collapse
Yes, I think you can, by flashing your original rom's sbf.
Check here: http://and-developers.com/sbf:milestone2 and if the links are down, download the sbf from here: http://sbf.droid-developers.org/umts_milestone2/list.php (check the build numbers and the carriers)
Regards
I'll look into it.
Hmm... I'll have to look into that. I'm not sure about it, I just got the phone 2 days ago. Lmfao
Can you put a guide up here for me to follow? Cause, I really like the ms2ginger rom. I might even flash it today, assuming I get the files
Darin_Ram said:
Can you put a guide up here for me to follow? Cause, I really like the ms2ginger rom. I might even flash it today, assuming I get the files
Click to expand...
Click to collapse
I never really tried this rom ever, but i'll try to explain the flashing steps more clearly.
It's well explained on the rom's thread though: http://forum.xda-developers.com/showthread.php?t=1169038
OK, you need these files:
The rom itself: https://docs.google.com/folder/d/0B...p1T0U/edit?docId=0B3OovGFEtCdnajgyRHV5dXg3SG8
The motoblur apps (if you want them): https://docs.google.com/folder/d/0B...p1T0U/edit?docId=0B3OovGFEtCdnNHA0dERlSFVxLUU
Patch for milestone 2: it's at the end of the roms thread
Gingerbread kernel (in case you are coming from stock froyo, cm7, or miui): http://forum.xda-developers.com/showpost.php?p=26889742&postcount=843
RSD Lite, at least version 5.0 (google it, should come right up) and the motorola drivers (if you don't have them): http://rootzwiki.com/topic/3216-roo...click-added-for-windows-linux-osx/#entry74495 If you rooted your phone with superoneclick or similar, you should have them already.
Steps:
0) Unzip the rom's folder from the zip to /sdcard/clockworkmod/backup and put the other 2 zips (motoblur and the ms2 patch) on the root of the sdcard.
1) Get into custom recovery (vol. down on the blue led)
2) Wipe data/factory reset, Wipe cache.
3) Go to nandroid -> restore and select MS2Ginger.
4) Go to install zip from sd card -> and select the MS2 patch. Repeat with motoblur.
5) Reboot, it will get stuck on a black screen. Remove the battery, wait 10 seconds and put it back. Hold the vol down, camera (all the way down) and the power button at the same time for 10 secs, let them go, you should see a black screen with "bootloader" at the top.
6) Plug in your phone to your pc, fire up RSD Lite (at least version 5.0) and flash the GB kernel's sbf. The phone will reboot.
7) That should do it
Good luck :good:
Still nothing
I still get the m5dsums mismatch. I'll have to do a little more looking for that file Too bad, I wanted something stable like that with working 720p
I'm reading here that I need to flash a fixed sbf file. I assume I need to do this with rsd lite the same way I'd have to if I bricked my defy?
Hi everyone,
some time ago I flashed a wrong sbf to my Defy and thanks to the All-in-One Defy Beginner's guide
Zephyrot said:
Installed full Gingerbread SBF and can’t go back to another rom: (!) aha! We have a issue here!, latest Stock Gingerbread full SBFs comes with a Version 5 of the CG, meaning until not long ago you were pretty much screwed. But wait, there is hope! A one kind Éclair has been found in China Defys that comes with Version 5 CG!.
How to fix it:
Method 1:
Download this SBF and Flash it
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup << File is Back, thanks Ichibanme again!>>
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
**NOTE*: I just rephrased the original post since it can be a bit confusing, it is linked as source below.
**NOTE2**: If you are using a non-Chinese defy, DO NOT USE THE CAMERA FLASH while on the Chinese rom, it WILL kill your LED.
Source: ((Original post here))[
Method 2: (BIG thanks to Jebrew again for this one)
NOTE: You are going to need CM7 for this one. CM7 Stable version recommended.
Download this SBF and Flash it.
Root your phone.
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery.
Reboot to CMW recovery, and wipe Data/Cache.
Install CM7 then install Google Apps.
Reboot an go into Stock Recovery (using the vol- button, not from Bootmenu).
Do a Data/Cache Wipe or you won't have any space when you're done.
Flash this Fixed SBF
Reboot into your nice new rom.
Do not Wipe Data anymore or you will have to start again.
You WONT be able to install full SBFs of any Éclair or Froyo since these Androids have lower CG Versions.
Click to expand...
Click to collapse
I'm running CM7 again with a version 5 CG, if I got it right.
So far so good. But now I need to update my ROM to be able to update some apps that won't run on CM7.
So what's the best tactic for updating this messed up phone? Just flashing any CM10+ ROM (I tried several ones) didn't seem to work. I always got stucked at the red Motorola 'M'.
Any ideas?
Thanks a lot!
Cheers,
Martin
smashedup said:
I always got stucked at the red Motorola 'M'
Click to expand...
Click to collapse
factory reset
Thanks for your reply.
Besides the fact that I can't go anywhere to do a factory reset as soon as I've updated to something like CM10, I do a lot of resets/wipes on my way to this state (see quoted guide above).
smashedup said:
Thanks for your reply.
Besides the fact that I can't go anywhere to do a factory reset as soon as I've updated to something like CM10, I do a lot of resets/wipes on my way to this state (see quoted guide above).
Click to expand...
Click to collapse
Use Defy full wiper/AROMA wiper to wipe system, data and cache with EXT4. Then immediately flash CM10 and gapps.
hotdog125 said:
Use Defy full wiper/AROMA wiper to wipe system, data and cache with EXT4. Then immediately flash CM10 and gapps.
Click to expand...
Click to collapse
Tried that, but now I always get a Status 7 error message when trying to install (no matter if I wipe with Aroma or in CWM). I found a lot of people with that same problem but no solution for me... I'm wondering why I did not have that status 7 thing before....
smashedup said:
Tried that, but now I always get a Status 7 error message when trying to install (no matter if I wipe with Aroma or in CWM). I found a lot of people with that same problem but no solution for me... I'm wondering why I did not have that status 7 thing before....
Click to expand...
Click to collapse
For some users flashing DFP-231 helped.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
For some users flashing DFP-231 helped.
Click to expand...
Click to collapse
Thanks for the hint!
But this is a Defy+ sbf and after flashing I might not be able to go back, or not?
From the thread [Q] defy bricked, not even JORDN_U3_97.21.51.sbf helps :
kirov1045 said:
what are the chances it will work? i'll scared i'll totally brick it. it's 100% not a defy+
Click to expand...
Click to collapse
thekguy said:
Zero percent chance of bricking
Only problem is that there may be problems in the stock rom, which can be fixed by installing cm10 or cm10.1
By problem I mean no camera or battery not charging to the full level but again these can be fixed by upgrading to cm10 or 10.1
Click to expand...
Click to collapse
If - for any reason - CM10+ does not work for me, I don't want to deal with these issues...
Or am I getting this wrong?
smashedup said:
Thanks for the hint!
But this is a Defy+ sbf and after flashing I might not be able to go back, or not?
From the thread [Q] defy bricked, not even JORDN_U3_97.21.51.sbf helps :
If - for any reason - CM10+ does not work for me, I don't want to deal with these issues...
Or am I getting this wrong?
Click to expand...
Click to collapse
Well, it helped some people. You can't go back to 2.2 after flashing GB.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
Well, it helped some people. You can't go back to 2.2 after flashing GB.
Click to expand...
Click to collapse
Thanks for clarifying.
But I just decided to not mess around another time and will stick to my well running CM7.2 for this device. I found a workaround for my app-prob anyway.
Thanks again for help!
Hi all
So, I have a problem with my Defy (MB525 green lens). The best will be, if I'll write my full story. Here is it:
Story
I had Defy with CM 10. It had bloated battery. I wasn't using it for 6 months because I have another phone.
Some time ago, I decided, that I'll give Defy to my grandfather. On Tuesday this week I bought new original battery. I put it in the Defy, and charge it. I could boot up my old system as I wrote, CM 10. While it was charging, I detected that I haven't got SD Card. On the other hand, I found some 4GB Samsung SD, which had my father in his Desire. The SD Card had 3 partitions, which I tried to delete, and make only one, with GParted. After I did it, Linux and Windows can't see it. (This is almost other problem, which I'm trying to solve here http://crunchbang.org/forums/viewtopic.php?pid=350683)
But, when I put the CD Card to Defy, in TWRP recovery I could see some strange symbols. I thought, that I can repair something when I wipe SD Card. When the battery charged, I decided to do factory reset and wipe SD card. Here is my first failure. In TWRP I went to custom wipe, and here I marked everything including system and I wiped it. Then I remembered that system is recovery too. TWRP wrote, that everything except SD-Ext and SD was wiped. I known that this will be a problem. Yes, after reboot only Motorola logo without recovery.
I think, there was only one option - flash SBF, which I did. I went to stock bootloader and with sbf flash in Linux, I flashed this:
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
And than this:
CM7RC1.5_16_09_11_custom.sbf
After reboot, I got bootloop. I tried to replace battery, do factory reset but nothing helped. That time I haven't got working card, so I couldn't flash some zip via CWM recovery. Thus, I again flash another SBF, but I don't really remember which. Probably some official CEE Froyo however, I'm not sure.
After that and reboot, I got only black screen with white led lighting while USB was connected. When I wanted to go to stock bootloader, still black screen, but I can flash SBF, and while flashing, screen have brightness and text about flashing.
I knew that this is little hard brick. I again tried to flash other SBF which I have or I downloaded (yes, again I don't know which). One of SBFs which I flashed was some fixed Chinese SBF . That made my defy booting, screen working, but still bootlooping. I couldn't reach any recovery.
Again, I flashed other SBFs, CM's too but nothing worked and I got black screen again.
And this was end of my story.
Current situation
I have Defy (MB525 green lens), with unknown framework an it had only black screen and what only I can do, is break Defy with hammer or flash some SBF.
So, here is list of all SBF files, that I have downloaded and probably tried to flash: (No order)
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
CM7RC1.5_16_09_11_custom.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANO2DE_P048_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P019_A010_HWp3_Service1FF.sbf
DFPRC_U_4.5.3-109_DPP-6-7_SIGNED_USADEFYPRCB1B50AA00A.0R_JRDNGIBRRTGC_P025_A019_HWp3a_Service1FF.sbf
JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF.sbf
JORDN_U3_97.21.51.sbf
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FF.sbf
4.5.1-134-DFP-132-gingerbread-BL6-fixed.sbf
4.5.2-109-DHT-22-gingerbread-BL5-fixed.sbf
3.4.2-177-003-nordic-froyo-fixed.sbf
3.4.2-179-002-tmobile-froyo-fixed.sbf
4.5.1-134-DFP-74-gingerbread-BL5-fixed.sbf
4.5.3-109-DPP-11-gingerbread-BL5-fixed.sbf
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN.sbf
Probably that is all what I have.
I've read many topics with similar problem and guides, but nothing helped me, or SBFs were unavailable.
So, what have I to flash, or which guide to try, if I want working Defy?
Sorry for my not good English
Thanks
UPDATE
sterver1 said:
Wohooo!!
Story
After a long time (4 months)...
Accidentally today I found my favorite custom ROM - MoKee OS, for Defy. I said to myself: "Hm, I have some time... I'll try to flash this MoKee on my Defy and maybe it solve my problem with (not) charging/unknown battery for system."
I picked out box with Defy from drawer, wiped the dust, took the Defy and said: "Sh*t! I haven't got SD Card!" Fortunately I found one. I download MoKee OS zip on that SD Card, put it to Defy, booted to recovery and flash MoKee OS zip. (...with full wipe of course...) Then rebooted to system.
Uselessly. Still unknown battery. "Hmm, It doesn't matter. Maybe here are some new stuffs which can solve my problem." And I continued to finding something, that can solve my problem. After a while I found ROMs with new 3.0 Kernel by Quarx. HERE. I downloaded CM 11 EXPERIMENTAL with this kernel and update recovery and flashed them. I didn't read thread. After reboot system didn't boot up and TWRP was inaccessible. I found why when I read some posts from that thread. HERE. But I couldn't flash that zip via recovery because I couldn't open recovery. So I mount /system to USB from bootloader and added files from zip manually to /system partition. After reboot it jammed on booting up. But TWRP was accessible so I did full wipe and flashed CM 11 EXPERIMENTAL and than that fix zip by @lorcotti. After that it finally booted up and battery was working and charging!
And they all lived happily ever after. :laugh:
SO, If you have some problem as me (unknown battery after flashing GB SBF on MB525), try this:
1. Download recovery and some ROM from [Kernel][GPL] Development 3.0 Kernel and fix from this post.
2. Put all zips on your SD Card.
3. Boot up to recovery.
4. Flash update-recovery.zip.
5. Reboot to recovery.
6. Do full wipe.
7. Flash ROM with 3.0 Kernel.
8. Flash Fix.
9. Wipe cache and dalvik cache.
10. Reboot to system.
If you want, you can flash GAPPS via recovery too.
But this will not be for daily usage! 3.0 Kernel by Quarx have a lot of bugs!
Thanks all!
Click to expand...
Click to collapse
Yeah!
Today I again tried to flash chines SBF. This one: JDGC_U6_2.13.0 China Unicom Thread/Download !!!BL6 kernel !!!
JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF.sbf
...and now I have bootable phone . I read many topics again and I got to know how to aces stock recovery. So I made wipe on this chines ROM and I can boot without loop, but I can only do emergency call with SIM it is the same. So, now, I don't know, what have I to do/flash, how to root it and flash here custom rom. Can I use SuperOneClick if it probably haven't got turned on USD Debugging?
Back on black
So, I made sbf file with depacker...
CMG39 from JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FF
and all others from JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF except CMG31.
Than the bootscreen changed from chines logo to grey motorola logo and I got Bootloader (9.00) Error A5,70,39,00,27. After that I flashed another sbf and I got Error A5,70,00,00,23. Than I flashed DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf and now I again have only black screen. F*ck!
I tried to flash my made sbf and chines one (JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF) too but nothing...
Really here is nobody who can help please??? I want give Defy as Christmas gift. :crying:
OK, so repetition.
What mistakes I've made
1. I wipe wipe all including system partition in TWRP without any flashable zip on SD card.
2. I continued with flashing original SBF, while I have usable CWM.
3. I flashed many no downgradable GB SBFs.
4. I flashed Defy Plus SBF on Defy.
I hope that there is still hope.
Somehow to downgrade, flash only CWM where I can flash nandroid backup or I don't know what else...
a gingerbread sbf should also work on green lens defy as there is no diff. in hw... instead the cam
have you tried a factory reset in stock recovery after sbf flash ?
Sent from my MB526 using xda app-developers app
Now, after all (which I tried) SBFs I get only black screen. I tried many GB SBFs too, but still black screen...
I'm going to try some another Poland SBFs and than if that won't work, I'll try to flash all in Froyo CEE SBF particularly.
Thanks for your response.
Once you've flashed GB stock sbf you can't go back staight to froyo or else
Read the beginners guide and the SBF matrix sektion carefully.. if you haven't...
Sent from my MB526 using xda app-developers app
DFP 231 has been flashed by you, so no froyo sbf will work. Black screen on dfp 231 indicates some eMMC problem, because bl version is highest(no error possible). IMHO only service centre can disable bl check or replace the main board to fix the problem
The problem should have been solved at the boot loop issue by wiping from stock recovery, no network solved by baseband/radio fixes. Check the rsdlite log file to confirm checksum/access errors. I think that the custom sbf somehow messed up either eMMC or efuse(less likely, unheard of).
For sdcard error wipe everything using hdd llf. If any error persists it's a hardware issue
Sent from my MB526 using Tapatalk 4
@bone101
I know, I read it few times, and I know how it is (not) working. But, after all GB SBFs I got only black screen, so maybe were not correctly flashed... I'm using Linux and here is sbf_flash for flashing SBFs, and in it I can't view informations about phone as in RSD Lite... But maybe, it will work in wine..
Do you now, that if I flashed GB SBF, I have to flash another GB to solve my problem, because no Froyo will work?
@thekguy
I know how I can solve others problems. Only what I need help to solve is black screen.
Can't I flash something which support that high BL or it won't work?
check if you get into Bl. modus
press vol. up & then power button
tell what you see
Sent from my MB526 using xda app-developers app
That's what I'm saying, the black screen problem occurs due to bl version mostly, and you have highest bl, so in theory black screen is impossible. Unfortunately I have never seen in this forum any defy recovering from black screen after flashing dfp231. Check rsd log from windows if possible. Froyo sbf cannot work under any circumstance. You must flash only gb sbf
Sent from my MB526 using Tapatalk 4
@bone101
When I acess bootloader I have only black screen... While flashing I can see
"SW Update
In progress.."
Ok, I have Windows notebook available... Here are device properites from RSD Lite:
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 173002052f066b010000dcff0200
BP Die ID: 0000000000000000000000000000
AP Public ID: d0d8842b4879dd27b9eb94f970fbeec252fcb2f4
BP Public ID: 0000000000000000000000000000000000000000
Click to expand...
Click to collapse
I'm going to try some GB SBFs here...
WOHOOO I've got it! I flashed 231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf and now I have got bootable phone... I'm in the system. I'm going to root it and flash CWM and MIUI if it will work.
Really thanks for your help!
sterver1 said:
@bone101
When I acess bootloader I have only black screen... While flashing I can see
"SW Update
In progress.."
Ok, I have Windows notebook available... Here are device properites from RSD Lite:
I'm going to try some GB SBFs here...
WOHOOO I've got it! I flashed 231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf and now I have got bootable phone... I'm in the system. I'm going to root it and flash CWM and MIUI if it will work.
Really thanks for your help!
Click to expand...
Click to collapse
I'm stuck in same problem, downloading this sbf you mention before, hope it works. Fu^kin defy, it sucks
@Alejandrissimo
Good luck...
I have another problem. Now, I have GB kernel. In original 2.3.6 GB on MB525 green camera don't work, and battery too. So, I thought that, when I flash Froyo kernel (CM) and CM7 I got back Froyo kernel and working camera and battery. Yes, this was not possible. After I did it and rebooted it I got Bootloader error. I flashed DFP-231 again. Worked.
Than I tried restore Froyo from nandroid which I found something here on forum. Than I flashed CM7 and bootloader error again.
Now I have CM7 by Maniac for defy plus which worked well except camera and battery... I know that here are many topics about downgrading, camera fixing and others but all which I read are bad in something for me...
Here are some options what I found but I don't know if I can use one:
Method 2: (BIG thanks to Jebrew again for this one)
NOTE: You are going to need CM7 for this one. CM7 Stable version recommended.
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=1216982
DOWNGRADE
If you come from Android 2.1 and never flashed Android 2.2 you can use the fixed sbf-files method. With this method you will have a option to downgrade to you personal stock Android 2.1 via direct sbf flash.
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=966537 but I'v ever flashed Android 2.2.
Or http://forum.xda-developers.com/showthread.php?t=1465436 ... This is better option but I have flashed full 2.3.6 SBF and here is:
It will only work if you never flashed a Android 2.3.6 full sbf.
Click to expand...
Click to collapse
So, how can I downgrade or repair battery and camera? I don't care whether I have got GB or Froyo kernel if I have working camera and battery.
have you tried cm11 ?
or ms2ginger by walter79
Sent from my MB526 using xda app-developers app
sterver1 said:
@Alejandrissimo
Good luck...
Click to expand...
Click to collapse
Working and rooted, thanks for your help
Alejandrissimo said:
Working and rooted, thanks for your help
Click to expand...
Click to collapse
please see your PN
sterver1 said:
@Alejandrissimo
Good luck...
I have another problem. Now, I have GB kernel. In original 2.3.6 GB on MB525 green camera don't work, and battery too. So, I thought that, when I flash Froyo kernel (CM) and CM7 I got back Froyo kernel and working camera and battery. Yes, this was not possible. After I did it and rebooted it I got Bootloader error. I flashed DFP-231 again. Worked.
Than I tried restore Froyo from nandroid which I found something here on forum. Than I flashed CM7 and bootloader error again.
Now I have CM7 by Maniac for defy plus which worked well except camera and battery... I know that here are many topics about downgrading, camera fixing and others but all which I read are bad in something for me...
Here are some options what I found but I don't know if I can use one:
from http://forum.xda-developers.com/showthread.php?t=1216982
from http://forum.xda-developers.com/showthread.php?t=966537 but I'v ever flashed Android 2.2.
Or http://forum.xda-developers.com/showthread.php?t=1465436 ... This is better option but I have flashed full 2.3.6 SBF and here is:
So, how can I downgrade or repair battery and camera? I don't care whether I have got GB or Froyo kernel if I have working camera and battery.
Click to expand...
Click to collapse
Congrats man! Seems that rsdlite on Windows is the most reliable solution. Now to fix everything just flash cm10 (jelly bean) or later rom. It includes fixes for camera and battery
Again, no downgrading bl(not even jtag will work)
Sent from my MB526 using Tapatalk 4
Oh, ok. I'll try it. Thanks.
Hmm, and than, can I flash CM7 by Maniac or JB/GB WIUI and fixes in CM10 will still working?
Ms2ginger is not good for me because it haven't got slovak language. I'll give defy to my grandfather.
//And now, in Quarx CM 10 my battery don't charge. I tried 2 chargers and charging via USB too.
In options, battery is still "60% - Unknown"
Alejandrissimo said:
Working and rooted, thanks for your help
Click to expand...
Click to collapse
Hehe, I'm glad...
sterver1 said:
Oh, ok. I'll try it. Thanks.
Hmm, and than, can I flash CM7 by Maniac or JB/GB WIUI and fixes in CM10 will still working?
Ms2ginger is not good for me because it haven't got slovak language. I'll give defy to my grandfather.
//And now, in Quarx CM 10 my battery don't charge. I tried 2 chargers and charging via USB too.
In options, battery is still "60% - Unknown"
Hehe, I'm glad...
Click to expand...
Click to collapse
There's a cm7 2ndboot build which should work for you. Try cm10.1 or above, problem should be solved.
JB wiui includes those fixes, as does cm7 2ndboot. I don't think that wiui GB has them. I would personally go for cm10.1 or above
Sent from my MB526 using Tapatalk 4