Database Users

[Q] defy+ - tried to install miui, didn't work

Hi Guys and Girls, I hope this is the right place for my question. Sorry if I sound like a 12-year old - my english is not really the best...
I own the Motorola Defy+, and I tried to get rid of motoblur. I installed SndInit 2.0, did a reboot, did a backup, did factory reset, wiped dalvik cache and picked the miui-rom I had previously placed on my SD. The installation went pretty good, my phone told me that it finished the installation and I did another reboot.
After the reboot I get the red M (default Motorola-logo just like before I was meddling around with the phone) but just for a very short period of time and then I get a black screen with white letters (slightly out of proportion) saying:
Bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to Program
Transfer Mode:
USB
When I remove the USB-cable the last two lines are replaced by:
Connect USB
Data Cable
Do you guys have any idea, how I could get MIUI, CM or anything else running on my phone again? I'd even be quite happy to have the stockrom running again, since a phone with ****ty motoblur is still better than no phone at all.
I'd be really grateful for any kind of help, thanks in advance.

The miui you installed was for defy or defy+? And , can you access to recovery?
Motorola Defy CM7 RC 1.5 OC 1GHz

You have forgot to do 2 things. this might be the problem .
Do:
1. Factory reset.
2. wipe data cache.
3. wipe dalvik cache.
4.install MIUI rom.
5. wipe once again data cache.
6. reboot.
If you can access recovery again . my guess you can..

Thank you guys for taking care of me!!
@LeonardoJegigzem
The MIUI is called miui-ger_DEFY_1.12.23_FULL_EN_DE.zip - it's for Defy but I've read in forums that it should run on Defy+ aswell.
@VoLtrex31
I can't access recovery (I'm assuming you're talking about the "push volume-down when blue LED turns on"-recovery?), the screen I described in OP appears right after the red-M shows up for the first time.
You are right, I didn't wipe data cache neither before, nor after the installation.

Thats not good.
Search in the forums for how to access the recovery via your computer..
This might be your only way.
Ask more forums for technical help since xda is not the best forum for asking for help.
because i am not an expert .
But don't worry i bet many people got that problem too so there is a solution .

at last you have stock recovery(i think)
to access it (on defy) ress and hold VOL DOWN and power button.
Than after(about 10 sec) you'll get an exclamation mark.
Now press VOL UP and DOWN at the same time and you can wipe data.
If phone boots up perfectly yo can reinstall 2ndinit.
If not.. i think that you have to flash the appropriate sbf via rsd lite.

buruss said:
at last you have stock recovery(i think)
to access it (on defy) ress and hold VOL DOWN and power button.
Than after(about 10 sec) you'll get an exclamation mark.
Now press VOL UP and DOWN at the same time and you can wipe data.
If phone boots up perfectly yo can reinstall 2ndinit.
If not.. i think that you have to flash the appropriate sbf via rsd lite.
Click to expand...
Click to collapse
Now that's great news - the folks at motorola seem to know that ppl want to avoid ****ty motoblur and **** up their phones so they built an easy way to rescue broken phones.
I will try that asap - right now I'm using an old sony ericsson Xperia X8 - want my Defy+ back!
Thanks buruss!

Hi guy,I know about what you talking.
1. everytime i stuck on "white letters" i recovered my defy+ with RSDLite and correct SBF file.
2. If you have 2.3.6 version of stock rom,miui or any common cm7 won't work - afaik. You must downgrade (somewhere is topic about it) or use cm7.2 or cm9
Sent from my MB526 using XDA App

mikrom.cz said:
Hi guy,I know about what you talking.
1. everytime i stuck on "white letters" i recovered my defy+ with RSDLite and correct SBF file.
2. If you have 2.3.6 version of stock rom,miui or any common cm7 won't work - afaik. You must downgrade (somewhere is topic about it) or use cm7.2 or cm9
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Yea, I 've been through the same today/yesterday, and after a lot of cursing I can tell you it is exactly like this T.T you have to re-flash the stock ROM 2.3.6 again, and then if you find a way to downgrade/install Miui-CM/basically anything than staying with the stock ROM, let me know! xD
Just relax, I'm telling you this because yesterday I could have killed a dragon with my bare hands, but a soft brick is NP, as long as RSDlite recognizes your phone you can always going back to safety, from what I've learnt hard bricking a Defy is veryveryvery hard, thanks/due to a locked boot loader

Hey Guys, first let me thank you! I'm feeling quite happy now knowing that I'm not the only one with this kinda problem and I'll try the RSDlite-rescue-mission in a few days.
Happy new year everybody!

mikrokosmonaut said:
Hey Guys, first let me thank you! I'm feeling quite happy now knowing that I'm not the only one with this kinda problem and I'll try the RSDlite-rescue-mission in a few days.
Happy new year everybody!
Click to expand...
Click to collapse
I guess it's inevitable, when you start trying this and that custom ROM, sooner or later you're going to screw it up xD but it's actually good when that happens, because you know 100% you can fix everything - you did it once, you'll do it again
Happy new year!

miui uses the 2.2 froyo as base, since all the defy plus have gingerbread miui wont boot, miui hve boot.img and davtree.img in the rom.zip, if you flashan old boot.img in to a newer defy plus with new bootloader(2.3.6) you get an error, ho to fix it, try deleting the boot.img and devtree.img from the zip and replace the 2.3.6 boot.img and devtree.img form 2.3.6 and add it to the zip( miui rom) and try to flash it again and see if it works

You guys are awesome! Phone is booting again
installed RSDlite 5.3.1
downloaded the latest .sbf for my phone and my provider
let RSDlite do its magic and now everything's working just fine.
Next thing to do - try again to get rid of motoblur!

It's not 100% true, I installed MIUI over my 2.3.4 Gingebread and it worked like a charm
Only problem is, I can't install it anymore now that I'm on 2.3.6, but 2.2 is not strictly needed, 2.3.4 worked as well

Hey, guys! I have the exact same problem. I tried to install a Galnet MIUI ROM over at galnetmiui.co.uk, and i messed it up. I didn't really know what i was doing. Perhaps i forgot to wipe cache after installation. Have the exact same error message as mikrokosmonaut.
I was running my mb 256 with android 2.3.6, as far as I know, i have to use RSD Lite to istall stock rom again. Where do I find the correct SBF? My phone was bought without a service provider subscribtion, so I have no clue where to find the right SBF. I have no objection against having blur on the phone.
Can anyone help?

hi guys!!
i've tried to install miui on my defy+ 2.3.6.. like i read on this thread i modified the .zip file changing the boot.img and devtree with the original one.
but mt defy can't boot.. stuck at motorola logo..
what can i do?? does anyone managed to install miui on a defy+ 2.3.6?
now i'm using cyanogen and it works fine, but i prefer miui
thanks!!

daede86 said:
hi guys!!
i've tried to install miui on my defy+ 2.3.6.. like i read on this thread i modified the .zip file changing the boot.img and devtree with the original one.
but mt defy can't boot.. stuck at motorola logo..
what can i do?? does anyone managed to install miui on a defy+ 2.3.6?
now i'm using cyanogen and it works fine, but i prefer miui
thanks!!
Click to expand...
Click to collapse
I don't think MIUI work on 2.3.6. you need CM7.2, or maybe some latest nightly version of MIUI

mikrom.cz said:
I don't think MIUI work on 2.3.6. you need CM7.2, or maybe some latest nightly version of MIUI
Click to expand...
Click to collapse
thanks for your reply! indeed i'm using cm 7.2.. it works pretty well, except some delays! never heard about miui nightly! i did a research on google but i couldn't find anything.. any idea??
thanks again!

hi again!
i was thinking.. you said miui shouldn't work on 2.3.6 and i guess you are right! so if i do the same thing i did (change the boot and devtree file in the latest miui.zip that is 2.3.7 if i'm not wrong) but using files from android 2.3.7?
maybe i try to explain myself better..
i make a nandroid backup of my cm 7.s2 which is 2.3.7.
then i change the files boot and devtree from cm 7.2 to the latest miui.
should it work? what do you think?
thanks again

Hi, folks! *GREAT NEWS!*
Some guys over at the devs section on the thread below have found a froyo sbf with bootloader 6 (the same as the defy 2.3.6 sbf)!!! This means we can use it to downgrade to froyo and install MIUI over it!
http://forum.xda-developers.com/showthread.php?t=1486731
I haven't tried it yet, but will flash later today or tomorrow. You should read through some of the posts and decide for yourselves if you want to try or not.
All the best!
-If I managed to help you in any way, please press the thanks button!

[Q] Defy restoring itself to old ROM automatically!!!

Hi All,
I am new here and this is my first post. But i have been reading this forum for quite sometime and know that u guys are now my final stone. I am a proud owner of a Motorola Defy. And I am having this strange behavior, which is effectively rendered the phone almost useless. The phone is acting like its got a restore point in itself, and every time i restart.. it gets back to that point in time.
This includes app installs, uninstalls, stuff placed in system through adb push, theme, everything in the OS. I tried installing a different ROm through clockworkmod, but its not taking effect. Its saying install success but as soon as it restarts, its going back to the old ROM. (takes time to load, so i guess it reinstall back/restored the old version)
Details of device : I am from India and the phone was manufactured in India in around April/May 2011. Its a red lens Defy and and came with Eclair. I updated it officially to the first Froyo release for SEA region. After that i rooted the phone with superone click, and installed WIUI rom. I have been updating the ROM with newer versions around each month. The last one was 1.11.18 though as i waiting for a good ICS version to flash.
The problem occurred after i started installing some gold apps from getJar. It restated in between and install... and that point is kind of acting like a restore point even now.
Things I did: Tried installing different rom by CWM method. Reinstalling second init and CM, both old and new version. Tried restoring nandroid backup of my official ROM. Tried fixed and full sbf flash through rsdlite 4.9.5.2 and now 5.6. First 3 things reset as soon as i restart. For RSDLite, it gives checksum error for each and every ROM i tried. I tried all SEA releases, JORDN_U3_97.21.51, Defy Plus Rom 2.3.6, 2.21 first eclair rom, everything gives the same error. From the RSDLite logs, i could see that there is something wrong as.. say the last successful CG was 33, and the error came for 34, the log says its expecting the checksum on the sbf to be equal to that of CG 33. Its taking the last successful checksum validation and expecting that for all the CGs henceforth. its not showing what the device actually has.
I atlast could somehow, but trial and error, removed all the CGs which were throwing error, and recompiled the sbf to make it pass the RSDLite flash. The CGs present in the ROM (JRDNEM_U3_3.4.3-36-1.7) were 32, 34, 42, 53, 61, 64, 65. And as soon as it booted, it restored back to the checkpoint. Even after i formatted by card and put it in, the app shortcuts remained on the home screen, but as the apps on the card were gone, they are just junk and doesnt open anything.
Thanks in advance. Please let me know what you need from me to help me resolve this issue.

Any help... Anyone?

Can someone please suggest something?
This is what i got from some people. I am not sure how far this is possible, but somehow the theme i installed just before this all happened, from MIUI market.. somehow managed to change something inside phone's kernel, past the locked bootloader? I am totally a noob in this and just a wild imagination?
Or may be some sort of cache wipe is happening everytime the phone boots up, So even when i install the ROM, when it boots up, it gets back the old ROM.. like what would probably happen if i do a factory reset soon after i instal a rom before the restart..?
I would really appreciate it if anyone could help me out with this...

Checksum errors were for me also.
I tried my office computer for flashing and instantly flash was done. The checksum error occurred 7 times on my good computer before that.
Reflashing froyo must take care of all errors happening

Thanks Kapil fr the response. Are you from india? Which sbf did u flash? And waht all did u install in the office pc? I have a pc of my friend where i can try to reflash if you tell me the exact steps that u took in the fresh pc.
Also, can anybody tell me how to use adb commands in CWM mode? Its recognizing my phone in normal mode but as soon as it boots in Moto recovery of CWM, its not recognizing anymore. Want to use adb format commands from recovery.

Hi I was able to use adb in CWM, but format commands were not working. How can i format the system partition? please help me with this.

Is there anyone here who know how to restore a nandroid backup manually using adb commands for MB525???!!!!!

Sounds weird and impossible. Try this. Wipe everything though cwm and flash new rom. Try ms2ginger.

Thanks darshanonline for the suggestion. I tried to wipe everything.. factory reset+cache+dalvik cache wipe. And then tried to install cyanogenmod 7.1 as well as 3 different wiui builds. Everytime it shows that the install was successful, ut as soon as i restart, it would go back to the old ROM.
Is there any checkpoint system in android, seeing the init.rc, i can see comments on something about saving a checkpoint. Is there any particular condition under which this checkpoint may be getting used on very restart?
Also.. is there any way for RSDLite to skip the chksum validations and get the install anyways?.. Some sort of a hack into it?

Ok.. Found something else thats happening. I dont need to shutdown for the system to revert back. Say i install a few things new after a reboot.. After some time.. 1 day at max, i am not able to open them, and neither am i able to open manage applications or market. Everything force closes. I have Ti Backup installed, and i opened it, and i didnt find the new apps to back up. I connected the device and checked through adb, and they were not present in the app folder. They just vanished... So basically after a certain point of tiime, the new stuff just gets deleted on its own.
Guys i know i may sound dumb and stupid with my questions, but i really couldnt find any solution on the net for this. Please tell me waht i should do, and i'll do it. But tell me something. Dont ignore please!

and you did wipe data from within stock recovery (vol down+power etc.), i presume..
Sent from my MB526 using Tapatalk

Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.

Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834

Soumik84 said:
Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.
Click to expand...
Click to collapse
DL WIUI 1.12.16 ICS > copy to SD card > Boot in CWM > select zip to install > Install WIUI 1.12.16
Hopefully your problem should be solved.
I found 1.12.16 ICS with lesser FC than the 2.21

labsin said:
Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834
Click to expand...
Click to collapse
Thanks for the link. Now i know that i am not the only one having this issue. But even there its not resolved yet.

@ headers.chennai - Thanks. I will try that ROM, along with Pikachu ROM with Aroma installer, might be a different installer can try fix it?!
BTW.. does anyone have the TI OMAP board utility? Any chance that it can be available outsite here?

I tried the arora installer and it supposedly formatted the system partition and remade it.. but as soon as it finishes and i restart.. I get back the same ROM.
Is it some way that the files are not getting deleted, like some hardware lock or fault?

Soumik84 said:
I tried the arora installer and it supposedly formatted the system partition and remade it...
Click to expand...
Click to collapse
Hi, bro! What is "arora"? I should try it asap, and all other chance.
My trouble here, same as your.

Hey man.. looks like we are having same problem...
Sorry abt the typo... its Aroma Installer. Its with the Pikachu ROM in this link :
http://forum.xda-developers.com/showthread.php?t=1498843
Its a new installer that launches from cwm when u try and install this ROM. u got some options to select and on selecting the complete install option,, the log shows that it formats the system partition and then creates it. I saved the log file, but for some reason the file shows up blank now. Might be problem with the launcher.. or my phone.. dont know.

Soumik84 said:
Its a new installer that launches from cwm...
Click to expand...
Click to collapse
Not for me, my checkpoint without cwm

[Q] Stuck on Google logo, can't access recovery mode

I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance

Do you still see the blue led for custom recovery?

Hmetool said:
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Click to expand...
Click to collapse
You will need to flash a new SBF with RSD lite
follow instructions in this thread
How to flash new SBF

Hmetool said:
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Click to expand...
Click to collapse
Do not flash any sbf's. Reboot the phone, at the blue led press Vol- and when you get into boot menu, flash the correct kernel. If you flashed Defy build, flash CM7 (Froyo) kernel. If you flashed the Defy+ build, flash CM9 (Bingerbread) kernel.

fiskenigaten said:
Do you still see the blue led for custom recovery?
Click to expand...
Click to collapse
I see the blue led, but it goes on to green regardless of what I do (power+voldown does nothing). I've tried to access recovery mode several times, but the phone doesn't respond. Maybe I'm doing something wrong.
rperdue5 said:
You will need to flash a new SBF with RSD lite
follow instructions in this thread
How to flash new SBF
Click to expand...
Click to collapse
I've read the guide, but my original SBF is missing ever since MegaUpload's demise. Is it possible to use the Nandroid backup instead?

Auris 1.6 vvt-i said:
Do not flash any sbf's. Reboot the phone, at the blue led press Vol- and when you get into boot menu, flash the correct kernel. If you flashed Defy build, flash CM7 (Froyo) kernel. If you flashed the Defy+ build, flash CM9 (Bingerbread) kernel.
Click to expand...
Click to collapse
Ok, apparently I wasn't pressing the button at the right time. Recovery mode is now working. However, I don't have the correct kernel in my SD card - only the wrong one.
My Nandroid backup seems not to be working too, apparently. I went into recovery and restored it, but boot still doesn't work. I wiped data/cache/dalvik cache and tried again, but it still didn't work. I'm at a loss here.
Should I try to flash some other sbf, since I can't find my phone's stock one?

Hmetool said:
Ok, apparently I wasn't pressing the button at the right time. Recovery mode is now working. However, I don't have the correct kernel in my SD card - only the wrong one.
My Nandroid backup seems not to be working too, apparently. I went into recovery and restored it, but boot still doesn't work. I wiped data/cache/dalvik cache and tried again, but it still didn't work. I'm at a loss here.
Should I try to flash some other sbf, since I can't find my phone's stock one?
Click to expand...
Click to collapse
go to ICS thread and on the first post there is a link to signed CM7 kernel zip..copy it to ur sd card and flash it..

arpith.fbi said:
go to ICS thread and on the first post there is a link to signed CM7 kernel zip..copy it to ur sd card and flash it..
Click to expand...
Click to collapse
I just tried installing the zip from the sdcard, but I got an error message: "Can't make /tmp/update_binary. Installation aborted". It seems that I can't install any zip now.
Is there any way out of that? I'd be more than happy if I could just flash my nandroid backup, even if that means being stuck without ICS for a bit more time.
I'm on ClockworkMod Recovery v2.5.1.8, if that helps.

Hmetool said:
I just tried installing the zip from the sdcard, but I got an error message: "Can't make /tmp/update_binary. Installation aborted". It seems that I can't install any zip now.
Is there any way out of that? I'd be more than happy if I could just flash my nandroid backup, even if that means being stuck without ICS for a bit more time.
I'm on ClockworkMod Recovery v2.5.1.8, if that helps.
Click to expand...
Click to collapse
Hi,
I faced a similar issue but it was since I flashed CM9 for Defy in my Defy+ with 2.3.6(stock) ! Nothing was working and I would get some boot errors! I rectified it by flashing full SBF and then rooting. Well if you want I can provide you with the SBF I have but it is for 2.3.6 and so you will loose downgradability. I have 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage with me. However, you can also give Walter's fixed SBF and Nandroid backup a try

Thanks, it turns out that flashing a sbf was a nice way out of this mess. I flashed a 2.2.2 which is almost identical to my stock rom (couldn't find that one).
If I root my phone now, can I still try to restore my nandroid backup? Or should I just skip that and try flashing ICS again?
My SD card has the 03-19 CM9 Nightly, gapps and both CM9 and CM7 signed kernels. Should that suffice? CM7 kernel is the right one for green lens defy, right?

Hmetool said:
Thanks, it turns out that flashing a sbf was a nice way out of this mess. I flashed a 2.2.2 which is almost identical to my stock rom (couldn't find that one).
If I root my phone now, can I still try to restore my nandroid backup? Or should I just skip that and try flashing ICS again?
My SD card has the 03-19 CM9 Nightly, gapps and both CM9 and CM7 signed kernels. Should that suffice? CM7 kernel is the right one for green lens defy, right?
Click to expand...
Click to collapse
If you are on a green lensed Defy, then yes - flash CM7 signed kernel and one of the Froyo bulds of Quarx or Epsylon3 - try them all if you wish and see which one you like the most.
Procedure is easy:
1. Full wipe
2. Flash CM7 kernel
3. Flash ROM
4. Flash gapps
5. Full Wipe
6. Reboot
When you decide to try a new ROM, there is no need to flash the kernel again, just wipe, flash the new ROM and gapps and then wipe again.

Auris 1.6 vvt-i said:
If you are on a green lensed Defy, then yes - flash CM7 signed kernel and one of the Froyo bulds of Quarx or Epsylon3 - try them all if you wish and see which one you like the most.
Procedure is easy:
1. Full wipe
2. Flash CM7 kernel
3. Flash ROM
4. Flash gapps
5. Full Wipe
6. Reboot
When you decide to try a new ROM, there is no need to flash the kernel again, just wipe, flash the new ROM and gapps and then wipe again.
Click to expand...
Click to collapse
Thanks, that's great. Are all regular Defy roms Froyo builds unless stated otherwise? I couldn't find that info on the files I have.
One question: by full wipe you mean data/cache/dalvik cache or is there anything else that I'm missing?

Hmetool said:
Thanks, that's great. Are all regular Defy roms Froyo builds unless stated otherwise? I couldn't find that info on the files I have.
Click to expand...
Click to collapse
Yes, "Defy build" means Froyo kernel based, "Defy+ build" means GB kernel based.
Hmetool said:
One question: by full wipe you mean data/cache/dalvik cache
Click to expand...
Click to collapse
Exactly.

Auris 1.6 vvt-i said:
Yes, "Defy build" means Froyo kernel based, "Defy+ build" means GB kernel based.
Exactly.
Click to expand...
Click to collapse
Yep, that's exactly what it is..

I've just rooted my phone again, followed the steps and installed CM9. It worked like a charm. I was pleasantly surprised at how smoothly it runs, didn't expect that sort of quality from a Nightly. Awesome.
Thanks a lot for saving my phone, guys.

Hmetool said:
I've just rooted my phone again, followed the steps and installed CM9. It worked like a charm. I was pleasantly surprised at how smoothly it runs, didn't expect that sort of quality from a Nightly. Awesome.
Thanks a lot for saving my phone, guys.
Click to expand...
Click to collapse
Sounds great Well since CM9 nightly is still a long way to go, you may want to dual boot CM7 and CM9. Install CM7 as primary and dual boot to CM9.
Guide: http://forum.xda-developers.com/showthread.php?t=1375156

i did the same thing on my defy im a noob and need alor of help.
Ok so i had a motorola defy and i wanted to update it to cyanogenmod 7 but it must have been the wrong one and now its stuck on google boot i can't get to my custom recovery screen by pressing volume - and power buttons and if i press volume + i get this black screen asking to plug in the usb to the laptop which i did but i don't know what to do now. i need complete instructions! , iv checked ALOT of forums and tried following this ones instructions, but RSD lite wont download and install like it said it would . and i have no idea how to get tmobile android 2.2 OS for motorola defy. if i could just get that back i would be more then forever greatfull . please someone HELP ! please all be forever in debt to whoever can help me.

blackhack516 said:
Ok so i had a motorola defy and i wanted to update it to cyanogenmod 7 but it must have been the wrong one and now its stuck on google boot i can't get to my custom recovery screen by pressing volume - and power buttons and if i press volume + i get this black screen asking to plug in the usb to the laptop which i did but i don't know what to do now. i need complete instructions! , iv checked ALOT of forums and tried following this ones instructions, but RSD lite wont download and install like it said it would . and i have no idea how to get tmobile android 2.2 OS for motorola defy. if i could just get that back i would be more then forever greatfull . please someone HELP ! please all be forever in debt to whoever can help me.
Click to expand...
Click to collapse
Try running three setup as administrator. Read all in defy guide. Check the wiki for more guides.
Sent from my MB525 using XDA

do u have a link?
labsin said:
Try running three setup as administrator. Read all in defy guide. Check the wiki for more guides.
Sent from my MB525 using XDA
Click to expand...
Click to collapse
do u have a link

n00b - moving from CM7 to another rom?

Apologies for the state of this question, but it's been a while
I've been using CM7 on my unlocked Defy since I bought it (6-8 months). However, recently it's gotten a lot more unstable; it freezes up all the time, I can't wake it up, google maps will crash half the time, the camera too, and it involves me restarting it a fair bit. I need to sort it out and I thought I could take this opportunity to try out a new ROM
However I haven't done anything ROM related for a while, and the computer I originally rooted/installed a new ROM on my Defy with is no long gone...so I'm not even sure what programs I need to install.
I seem to remember, the way the Defy is set up, it isn't as simple as wiping the phone and installing any ROM on it?
Could anyone point me in the direction of a guide on here dedicated to moving from CM7 to another ROM? From scratch? Failing that, I may be tempted to just try and wipe and get CM7 on there from the beginning...not even sure where to start
Thanks

If you want to flash a stock ROM, you need to flash the SBF through RSDLite.
While to flash a custom ROM(CM7,CM9), boot into recovery, wipe all, flash the zip from sdcard.

neo.ank said:
If you want to flash a stock ROM, you need to flash the SBF through RSDLite.
While to flash a custom ROM(CM7,CM9), boot into recovery, wipe all, flash the zip from sdcard.
Click to expand...
Click to collapse
nice one, thanks. It's just as simple as that when changing from one ROM to another? I thought something to do with how the Defy's memory worked meant some kind of 'backtracking; wasn't possible

insurgente said:
nice one, thanks. It's just as simple as that when changing from one ROM to another? I thought something to do with how the Defy's memory worked meant some kind of 'backtracking; wasn't possible
Click to expand...
Click to collapse
Yep, that simple. You could try Pikachu Edition, for example, which is even easier (just get into Recovery, install zip, choose the zip file and then AROMA installer does almost everything that's needed). I'm just starting to try it, many people like it.
If you move between CM7 nightlies it isn't even necessary to wipe data, but given your condition, I would recommend you to wipe everything and start again (remember to backup apps and data).
Good luck!

great, always good to see a bit of pikachu
can I go straight from CM7 to pikachu via a wipe? isn't CM7 on kernel 2.3.7?

[Q] update CM7 to CM10 after messing up with wrong sbf

Hi everyone,
some time ago I flashed a wrong sbf to my Defy and thanks to the All-in-One Defy Beginner's guide
Zephyrot said:
Installed full Gingerbread SBF and can’t go back to another rom: (!) aha! We have a issue here!, latest Stock Gingerbread full SBFs comes with a Version 5 of the CG, meaning until not long ago you were pretty much screwed. But wait, there is hope! A one kind Éclair has been found in China Defys that comes with Version 5 CG!.
How to fix it:
Method 1:
Download this SBF and Flash it
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup << File is Back, thanks Ichibanme again!>>
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
**NOTE*: I just rephrased the original post since it can be a bit confusing, it is linked as source below.
**NOTE2**: If you are using a non-Chinese defy, DO NOT USE THE CAMERA FLASH while on the Chinese rom, it WILL kill your LED.
Source: ((Original post here))[
Method 2: (BIG thanks to Jebrew again for this one)
NOTE: You are going to need CM7 for this one. CM7 Stable version recommended.
Download this SBF and Flash it.
Root your phone.
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery.
Reboot to CMW recovery, and wipe Data/Cache.
Install CM7 then install Google Apps.
Reboot an go into Stock Recovery (using the vol- button, not from Bootmenu).
Do a Data/Cache Wipe or you won't have any space when you're done.
Flash this Fixed SBF
Reboot into your nice new rom.
Do not Wipe Data anymore or you will have to start again.
​
You WONT be able to install full SBFs of any Éclair or Froyo since these Androids have lower CG Versions.​
Click to expand...
Click to collapse
I'm running CM7 again with a version 5 CG, if I got it right.
So far so good. But now I need to update my ROM to be able to update some apps that won't run on CM7.
So what's the best tactic for updating this messed up phone? Just flashing any CM10+ ROM (I tried several ones) didn't seem to work. I always got stucked at the red Motorola 'M'.
Any ideas?
Thanks a lot!
Cheers,
Martin

smashedup said:
I always got stucked at the red Motorola 'M'
Click to expand...
Click to collapse
factory reset

Thanks for your reply.
Besides the fact that I can't go anywhere to do a factory reset as soon as I've updated to something like CM10, I do a lot of resets/wipes on my way to this state (see quoted guide above).

smashedup said:
Thanks for your reply.
Besides the fact that I can't go anywhere to do a factory reset as soon as I've updated to something like CM10, I do a lot of resets/wipes on my way to this state (see quoted guide above).
Click to expand...
Click to collapse
Use Defy full wiper/AROMA wiper to wipe system, data and cache with EXT4. Then immediately flash CM10 and gapps.

hotdog125 said:
Use Defy full wiper/AROMA wiper to wipe system, data and cache with EXT4. Then immediately flash CM10 and gapps.
Click to expand...
Click to collapse
Tried that, but now I always get a Status 7 error message when trying to install (no matter if I wipe with Aroma or in CWM). I found a lot of people with that same problem but no solution for me... I'm wondering why I did not have that status 7 thing before....

smashedup said:
Tried that, but now I always get a Status 7 error message when trying to install (no matter if I wipe with Aroma or in CWM). I found a lot of people with that same problem but no solution for me... I'm wondering why I did not have that status 7 thing before....
Click to expand...
Click to collapse
For some users flashing DFP-231 helped.
Sent from my Nexus 7 using Tapatalk

hotdog125 said:
For some users flashing DFP-231 helped.
Click to expand...
Click to collapse
Thanks for the hint!
But this is a Defy+ sbf and after flashing I might not be able to go back, or not?
From the thread [Q] defy bricked, not even JORDN_U3_97.21.51.sbf helps :
kirov1045 said:
what are the chances it will work? i'll scared i'll totally brick it. it's 100% not a defy+
Click to expand...
Click to collapse
thekguy said:
Zero percent chance of bricking
Only problem is that there may be problems in the stock rom, which can be fixed by installing cm10 or cm10.1
By problem I mean no camera or battery not charging to the full level but again these can be fixed by upgrading to cm10 or 10.1
Click to expand...
Click to collapse
If - for any reason - CM10+ does not work for me, I don't want to deal with these issues...
Or am I getting this wrong?

smashedup said:
Thanks for the hint!
But this is a Defy+ sbf and after flashing I might not be able to go back, or not?
From the thread [Q] defy bricked, not even JORDN_U3_97.21.51.sbf helps :
If - for any reason - CM10+ does not work for me, I don't want to deal with these issues...
Or am I getting this wrong?
Click to expand...
Click to collapse
Well, it helped some people. You can't go back to 2.2 after flashing GB.
Sent from my Nexus 7 using Tapatalk

hotdog125 said:
Well, it helped some people. You can't go back to 2.2 after flashing GB.
Click to expand...
Click to collapse
Thanks for clarifying.
But I just decided to not mess around another time and will stick to my well running CM7.2 for this device. I found a workaround for my app-prob anyway.
Thanks again for help!