Database Users

I went through the thread thoroughly, but didnt find a solution

So, I posted before about wanting to flash a custom rom to my newly bought Milestone2. Sadly, no replies.
My problem now is that I have rooted, did the droid2bootstrap and then flashed Bootmenu via CWM, downloaded the MS2GINGER 4.0 with the kernel update and baseband switcher and the blur apps.
I boot into recovery fine, wipe/factory reset works. Clears the cache. But when I try to restore the system of the Ms2ginger, it says that the md5's dont match. Can anyone tell me what to do to get this rom working on my Milestone2?

Darin_Ram said:
So, I posted before about wanting to flash a custom rom to my newly bought Milestone2. Sadly, no replies.
My problem now is that I have rooted, did the droid2bootstrap and then flashed Bootmenu via CWM, downloaded the MS2GINGER 4.0 with the kernel update and baseband switcher and the blur apps.
I boot into recovery fine, wipe/factory reset works. Clears the cache. But when I try to restore the system of the Ms2ginger, it says that the md5's dont match. Can anyone tell me what to do to get this rom working on my Milestone2?
Click to expand...
Click to collapse
You can try this fix: http://forum.xda-developers.com/showthread.php?t=714114
Works in linux, if you have windows, you're gonna have to find md5sum somewhere else.
Hope it helps :good:

Thank you!!!!!!!
Lean946 said:
You can try this fix: http://forum.xda-developers.com/showthread.php?t=714114
Works in linux, if you have windows, you're gonna have to find md5sum somewhere else.
Hope it helps :good:
Click to expand...
Click to collapse
Thanks man! I appreciate it. I have one more question though, for the ms2ginger, the kernel update cant be downgraded to froyo afterwards?
I've been reading but I havent really tried anything. I just (literally, 5 minutes ago) flashed the CM7 on the phone.

Darin_Ram said:
Thanks man! I appreciate it. I have one more question though, for the ms2ginger, the kernel update cant be downgraded to froyo afterwards?
I've been reading but I havent really tried anything. I just (literally, 5 minutes ago) flashed the CM7 on the phone.
Click to expand...
Click to collapse
Yes, I think you can, by flashing your original rom's sbf.
Check here: http://and-developers.com/sbf:milestone2 and if the links are down, download the sbf from here: http://sbf.droid-developers.org/umts_milestone2/list.php (check the build numbers and the carriers)
Regards

I'll look into it.
Hmm... I'll have to look into that. I'm not sure about it, I just got the phone 2 days ago. Lmfao

Can you put a guide up here for me to follow? Cause, I really like the ms2ginger rom. I might even flash it today, assuming I get the files

Darin_Ram said:
Can you put a guide up here for me to follow? Cause, I really like the ms2ginger rom. I might even flash it today, assuming I get the files
Click to expand...
Click to collapse
I never really tried this rom ever, but i'll try to explain the flashing steps more clearly.
It's well explained on the rom's thread though: http://forum.xda-developers.com/showthread.php?t=1169038
OK, you need these files:
The rom itself: https://docs.google.com/folder/d/0B...p1T0U/edit?docId=0B3OovGFEtCdnajgyRHV5dXg3SG8
The motoblur apps (if you want them): https://docs.google.com/folder/d/0B...p1T0U/edit?docId=0B3OovGFEtCdnNHA0dERlSFVxLUU
Patch for milestone 2: it's at the end of the roms thread
Gingerbread kernel (in case you are coming from stock froyo, cm7, or miui): http://forum.xda-developers.com/showpost.php?p=26889742&postcount=843
RSD Lite, at least version 5.0 (google it, should come right up) and the motorola drivers (if you don't have them): http://rootzwiki.com/topic/3216-roo...click-added-for-windows-linux-osx/#entry74495 If you rooted your phone with superoneclick or similar, you should have them already.
Steps:
0) Unzip the rom's folder from the zip to /sdcard/clockworkmod/backup and put the other 2 zips (motoblur and the ms2 patch) on the root of the sdcard.
1) Get into custom recovery (vol. down on the blue led)
2) Wipe data/factory reset, Wipe cache.
3) Go to nandroid -> restore and select MS2Ginger.
4) Go to install zip from sd card -> and select the MS2 patch. Repeat with motoblur.
5) Reboot, it will get stuck on a black screen. Remove the battery, wait 10 seconds and put it back. Hold the vol down, camera (all the way down) and the power button at the same time for 10 secs, let them go, you should see a black screen with "bootloader" at the top.
6) Plug in your phone to your pc, fire up RSD Lite (at least version 5.0) and flash the GB kernel's sbf. The phone will reboot.
7) That should do it
Good luck :good:

Still nothing
I still get the m5dsums mismatch. I'll have to do a little more looking for that file Too bad, I wanted something stable like that with working 720p

I'm reading here that I need to flash a fixed sbf file. I assume I need to do this with rsd lite the same way I'd have to if I bricked my defy?

[Q] Red LED and Black screen on CM10 2nd-boor ROM's

Hey there, I've tried almost every method to boot up the new Quarx builds, but for me it's impossible to boot this ROM's on my Defy red lens.
I have pull out the battery, installed the fix for dead screens, flashed 2409 and then the 0610 kernel, but no result.
Also, I wasn't able to boot the last non 2nd-boot built, the 2409 CM10 Nightly so I'm using 1209.
The only thing that I haven't is flashing another .sbf, but RSDLite doesn't recognize my Defy and Windows also not, with the latest drivers of Motorola installed.
Please, if anyone knows how to help me, reply me as soon as you can.
Thanks in advance and sorry for my poor english.

http://forum.xda-developers.com/showthread.php?t=1818520 try it with this zip, it worked for me. just erase all and flash latest build.
Jelly powered.Defy

Thank you for replying so fast, but I have already tried that a couple of times before. Anyway, I'll try again.
More info about my problem: when I flash any of the 2nd-boot ROM's and boot into bootmenu and after that select again 2nd boot, the screen goes black, BUT the backlight of the buttons turns on. Does it mean anything ?
Thanks in advance
Sent from my MB525 using xda app-developers app

TinoSP said:
Thank you for replying so fast, but I have already tried that a couple of times before. Anyway, I'll try again.
More info about my problem: when I flash any of the 2nd-boot ROM's and boot into bootmenu and after that select again 2nd boot, the screen goes black, BUT the backlight of the buttons turns on. Does it mean anything ?
Thanks in advance
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
normal the buttons flash and after few seconds u see the boot animation.
tell me more about ur phone.
what bl? and what model mb525 or 526.
Jelly powered.Defy

AnTerNoZ said:
normal the buttons flash and after few seconds u see the boot animation.
tell me more about ur phone.
what bl? and what model mb525 or 526.
Jelly powered.Defy
Click to expand...
Click to collapse
It's an MB525 Red lenses(Bayer). I don't know what kind of BL has, it comes from the official Froyo ROM of Vodafone Spain, and after that CM7,
So close..but I waited when the buttons were on for about an hour or something and nothing happened, should I be more patient?

TinoSP said:
It's an MB525 Red lenses(Bayer). I don't know what kind of BL has, it comes from the official Froyo ROM of Vodafone Spain, and after that CM7,
So close..but I waited when the buttons were on for about an hour or something and nothing happened, should I be more patient?
Click to expand...
Click to collapse
if u wait longer ur battery run out of power! don't do this or u have to mcgyver it.
do the following
load the CM10 2nd boot new
load the new version 4 update
wipe ur device
install ROM + update
install Gapps ur want
restart phone, if u get red led longer than a minute, pull battery out for 5-10min and press power button when battery is removed.
put back the battery, and wait for the CM10 bootanimation.
if that not work ur bl is not compatible and u had to flash a higher one, it's known that some bl5 not work, u just had to flash a bl6 ROM. for the ROM just look at the thread were all roms in, there u can found ur bl version.
Jelly powered.Defy

AnTerNoZ said:
if u wait longer ur battery run out of power! don't do this or u have to mcgyver it.
do the following
load the CM10 2nd boot new
load the new version 4 update
wipe ur device
install ROM + update
install Gapps ur want
restart phone, if u get red led longer than a minute, pull battery out for 5-10min and press power button when battery is removed.
put back the battery, and wait for the CM10 bootanimation.
if that not work ur bl is not compatible and u had to flash a higher one, it's known that some bl5 not work, u just had to flash a bl6 ROM. for the ROM just look at the thread were all roms in, there u can found ur bl version.
Jelly powered.Defy
Click to expand...
Click to collapse
Ok, I'm gonna try it, but first, to ensure that I'm doing the steps right, I'm gonna ask you two things: With "wipe" you mean wipe data+cache+dalvik or with the defy_full_wipe.zip?
And till now, I have flashed the updates as a normal ROM, should I flash them as an update.zip ?

yes, it's an update.zip! just enter custom recovery and go to install zip.
and wiping with recovery is enought, i use the ultimate zip only if i get problems.
Jelly powered.Defy

I have just tried and it hasn't worked. Thanks anyways for you efforts. I think that my only possible solution is flashing a new .sbf, but Rsdlite doesn't recognize my Defy
Sent from my MB525 using xda app-developers app

have u tried a different USB slot?
if u flash an sbf, try the custom ones, they are great.
Jelly powered.Defy

Yes, I have tried in four different USB ports in my laptop and even Windows doesn't recognize it, it shows my Defy as a unknown device
Sent from my MB525 using xda app-developers app

hmmm... what OS u had on PC? had u tried reinstall Motorola drivers with reboot?
Jelly powered.Defy

same problem, green lense
I have the same issues.
I have a green lens defy, was able to flash every nightly version until the 0924 version. So in other words, the last ROM that I was able to get booted was the 0912 quarx CM10 nightly.
I have looked in all the threads I could find, searched as much as I could, tried every technique, and still can't get past the black screen with the red LED.
I absolutely cannot get it to work no matter what I try. I've seriously read at least half a dozen people's instructions and nothing works. NOTHING! I have not tried starting from a stock sbf because I'm satisfied just barely enough using the 0912 nightly.
HELP!

Try to restore your Nandroid backup. If it does not work use RSDLite on a clean OS and reinstall root access,2ndinit and CM10.
Sent from my MB526 using xda app-developers app

AnTerNoZ said:
hmmm... what OS u had on PC? had u tried reinstall Motorola drivers with reboot?
Jelly powered.Defy
Click to expand...
Click to collapse
I have Windows 7 Home Premium, and I have run RSDLite in administrator rights and even in compatibility mode. I didn't tried to reinstall drivers because I don't have much time right now, so I'll tell you.
nastys said:
Try to restore your Nandroid backup. If it does not work use RSDLite on a clean OS and reinstall root access,2ndinit and CM10.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Are you replying to bulbouscorm or to me?

it happens to me with win 7 ultimate that the driver I installed half year before was corrupt, pleas try reinstall.
it's really not often that a defy will not recognized on PC.
u can also try a Linux Live-CD to flash it from there. but I not know the tool for Linux, search on forum and u will find it
Jelly powered.Defy

nastys said:
Try to restore your Nandroid backup. If it does not work use RSDLite on a clean OS and reinstall root access,2ndinit and CM10.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
I restored my backup from a ICS version, but then I kind-of bricked my phone so I had to flash the stock Eclair .sbf.
I was playing with my very dumb phone at work, now I'm home I'll try to update to the latest CM10. Fingers crossed!
EDIT: I flashed the 1018 nightly - this time the boot logo was a silver M instead of the google logo I've been used to. AAAAAND it's still giving me a black screen + red LED. I flashed the sbf, rooted, installed 2nd init, and then flashed the 1018 nightly, the update, gapps with some cache/dalvik wiping before and after the nightly-update-gapps flash
I'm trying again using the custom zip files to wipe everything instead of using the recovery menu. Also this time I'm using the minimal gapps instead of the 1011 version
AAAAND it didn't work. black screen + red LED. I'm really looking for help here. Should I have not flashed straight from the froyo-updated stock sbf to the latest jb nightly?

bulbouscorm said:
I restored my backup from a ICS version, but then I kind-of bricked my phone so I had to flash the stock Eclair .sbf.
I was playing with my very dumb phone at work, now I'm home I'll try to update to the latest CM10. Fingers crossed!
EDIT: I flashed the 1018 nightly - this time the boot logo was a silver M instead of the google logo I've been used to. AAAAAND it's still giving me a black screen + red LED. I flashed the sbf, rooted, installed 2nd init, and then flashed the 1018 nightly, the update, gapps with some cache/dalvik wiping before and after the nightly-update-gapps flash
I'm trying again using the custom zip files to wipe everything instead of using the recovery menu. Also this time I'm using the minimal gapps instead of the 1011 version
AAAAND it didn't work. black screen + red LED. I'm really looking for help here. Should I have not flashed straight from the froyo-updated stock sbf to the latest jb nightly?
Click to expand...
Click to collapse
I was getting the black screen + red LED too, but manage to get it to work.
1: I flashed 0924
2: Then wiped everything
3: Flashed the 1018 build.
4: Tried botting - red LED + black screen
5: Booted to recovery
6: In boot options, reselected 2nd boot.
7: Tried to boot - red LED + black screen
8: Removed the battery
9: Waited 5 mins (could be more)
10: Placed the battery back
11: Tried to boot - Success.
Most of this steps are not needed, but it is what made my Defy boot with the 2ndboot builds.

bulbouscorm said:
...
I had to flash the stock Eclair .sbf.
.....
EDIT: I flashed the 1018 nightly - this time the boot logo was a silver M instead of the google logo I've been used to.
...
Click to expand...
Click to collapse
the silver m is eclair bootanimation
something defiantly goes wrong with ur phone. u should upgrade to a froyo ROM with bootloader version 6, there are a few user had problem with older bootloader to run second boot builds
Jelly powered.Defy

Yes, use BL6, latest CM10 2nd init rom and wipe data,cache,dalvik before installing, then use Stable Recovery to install zip from sdcard->18.10 ROM then install zip from sdcard->update v4 then install zip from sdcard->Gapps, reboot twice and it will work.
Sent from my MB526 using xda app-developers app
EDIT: And remember to wipe everything before restoring a Nandroid backup.

[Q] No blue light after 2ndinit

Hello,
I was running CM7.2 but had an issue so I flashed back to the stock rom. Now I'm trying to flash a new custom rom but for some reason 2ndinit is not working.
I rooted and installed the recovery menu from 2ndinit, but I am not seeing a blue light on bootup.
The phone boots into the stock rom just fine, but I cannot get into the recovery menu.
Any help?
Problem
Cannot access ClockworkMod Recovery menu after installing 2ndInit
What I've tried
Wiped SD
Wiped Data
Reflashed JORDN_U3_6.36.0
Rooted
Installed 2ndinit 2.3
Still no luck, upon boot there is no LED. If I hold the down volume for the entire boot I am met with an android exclamation mark.

Update...
I was able to access an old version of CWM v2.5 using 2ndinit 2.0.
But that brings with it a new set of problems. When trying to access the SD card from CWM, it cannot mount it.
Using ADB and the commands in this forum (forum.cyanogenmod.com/topic/33179-problems-installing-71-recovery-cant-mount-sdcard/) I was able to mount the SD and install CM7.2.
Now I am having GPS and 3g connectivity issues with CM7.2 that I've never had before. It makes me wonder if that hack way of mounting the SD messed up the installation?
I am using the US T-Mobile 3.4.2-107-9 baseband.

Takkun88 said:
Hello,
I was running CM7.2 but had an issue so I flashed back to the stock rom. Now I'm trying to flash a new custom rom but for some reason 2ndinit is not working.
I rooted and installed the recovery menu from 2ndinit, but I am not seeing a blue light on bootup.
The phone boots into the stock rom just fine, but I cannot get into the recovery menu.
Any help?
Problem
Cannot access ClockworkMod Recovery menu after installing 2ndInit
What I've tried
Wiped SD
Wiped Data
Reflashed JORDN_U3_6.36.0
Rooted
Installed 2ndinit 2.3
Still no luck, upon boot there is no LED. If I hold the down volume for the entire boot I am met with an android exclamation mark.
Click to expand...
Click to collapse
Hi there. Any luck getting this to work, as i have the same issue.
I rooted the phone, then installed 2ndInit and when i reboot it has no blue light. When i run the Defy 2mdInit in android it lights up red, then goes green, so appears to be doing all right stuff.
A silly question but one i cant find a answer too, is how to reboot! Im holding down the power button, then selecting power off. Once off i power on again, now technically thats a cold restart. Is there a different method to rebooting/restarting once the green light is on?
Many thanks.

Twister42ZA said:
Hi there. Any luck getting this to work, as i have the same issue.
I rooted the phone, then installed 2ndInit and when i reboot it has no blue light. When i run the Defy 2mdInit in android it lights up red, then goes green, so appears to be doing all right stuff.
A silly question but one i cant find a answer too, is how to reboot! Im holding down the power button, then selecting power off. Once off i power on again, now technically thats a cold restart. Is there a different method to rebooting/restarting once the green light is on?
Many thanks.
Click to expand...
Click to collapse
If you just want to install a custom rom, like cm7 then you don't need to go through that process. You could try this method instead http://forum.xda-developers.com/showthread.php?t=1787541
Please note: This method does not work for BL7 bootloader.

pravarth said:
If you just want to install a custom rom, like cm7 then you don't need to go through that process. You could try this method instead http://forum.xda-developers.com/showthread.php?t=1787541
Please note: This method does not work for BL7 bootloader.
Click to expand...
Click to collapse
Hi There Pravarth.
Im completely new to all this, and this will be the first phone i mod. All i would like to do is install CM 10.2 (Android 4.3) and overclock to 1.0Ghz.
I know the Kernel needs to be changed to overclocking from what i read, so if i do the ROM update via this method, is there a option to overclock then too?
Is there a known issie with 2ndInit not doing the blue light on a reboot?
Many thanks.

Twister42ZA said:
Hi There Pravarth.
Im completely new to all this, and this will be the first phone i mod. All i would like to do is install CM 10.2 (Android 4.3) and overclock to 1.0Ghz.
I know the Kernel needs to be changed to overclocking from what i read, so if i do the ROM update via this method, is there a option to overclock then too?
Is there a known issie with 2ndInit not doing the blue light on a reboot?
Many thanks.
Click to expand...
Click to collapse
First of all, do you have a defy or defy+? Because some methods dont work for defy+
Then you should probably read this if you new to flashing: http://forum.xda-developers.com/showthread.php?t=1216982
I also suggest going from stock to cm7 and then cm10.2
Cm10.2 is overclocked to 1ghz by default. You dont have to do anything

pravarth said:
First of all, do you have a defy or defy+? Because some methods dont work for defy+
Then you should probably read this if you new to flashing: http://forum.xda-developers.com/showthread.php?t=1216982
I also suggest going from stock to cm7 and then cm10.2
Cm10.2 is overclocked to 1ghz by default. You dont have to do anything
Click to expand...
Click to collapse
Hi again.
I have a Defy with no moto blur and a red lens.
I have read a lot about flashing, and downloaded all the files i needed, rooted the phone then first problem came getting 2ndInit. I was having issues with the phone resetting when connected via usb so got the SndInitDefy_2.3.apk which runs fine, goes through all the steps, red light becomes a green light and says success. But then when i reboot it never shows the blue light.
Also a lot of these guides are Windows based and i dont use Windows i use Linux.
What are the benifits of going to CM10.2 via CM7, is there a reason for this?
Am i rebooting the correct way by doing a shut down then starting the phone again? Is there no way to do a hot reboot rather than a cold reboot?
Thanks again for your replies.

I don't know what went wrong, you should have been able to see the blue led. But, it's much easier to recover by flashing the easy recovery sbf. Then reboot to recovery and flash cm7. I say flash cm7 because the new cm10.2 has a newer version of update-binary so it wont flash successfully.
You need cm7 just for the CWM and bootmenu, from there you can flash cm10.2
You can use this method to flash sbf using linux http://forum.xda-developers.com/showthread.php?t=1076138

pravarth said:
First of all, do you have a defy or defy+? Because some methods dont work for defy+
Then you should probably read this if you new to flashing: http://forum.xda-developers.com/showthread.php?t=1216982
I also suggest going from stock to cm7 and then cm10.2
Cm10.2 is overclocked to 1ghz by default. You dont have to do anything
Click to expand...
Click to collapse
Hi.
I seem to be having more success now, i got SndInit1.4.apk and now it gives the blue light and im in the BootMenu!
So maybe the new version has some issues!
---------- Post added at 05:55 PM ---------- Previous post was at 05:01 PM ----------
Well im now ablle to at least get the bootmenu, however everything is there but it wont mount my sd card. Its shows the following..
ClockworkMod Recovery v2.5.1.8
E:Can't mount /dev/blocl/mmcblk0p1 (or /dev/blocl/mmnblk0)
(No such file or directory)
E:Can't mount /sdcard
Any ideas what is causing this problem?
I did try with another SD card, tried a smaller one thinking its a size issue, then formatted it too and same error message comes up.
Hope im giving enough info, but thats all i can see. Thanks again.

Twister42ZA said:
Hi.
ClockworkMod Recovery v2.5.1.8
E:Can't mount /dev/blocl/mmcblk0p1 (or /dev/blocl/mmnblk0)
(No such file or directory)
E:Can't mount /sdcard
Any ideas what is causing this problem?
I did try with another SD card, tried a smaller one thinking its a size issue, then formatted it too and same error message comes up.
Hope im giving enough info, but thats all i can see. Thanks again.
Click to expand...
Click to collapse
So, I'm guessing you flashed froyo, root and then sndinit? Did you try the easy recovery method?
While I've had similar issue before, I would just assume it was some bad flash and start over. Never wondered why it would happen. It is quite a pain. But most importantly, make sure the battery doesn't go low otherwise it wont allow you to flash.
Usually all such problems go away if you return to stock and try again
Here's what I usually do: Flash froyo stock + super one click to root + 2ndinitdefy2.0apk (It has the new version of CWM). Then flash cm7
OR
Flash froyo stock + easy recovery sbf. Then flash cm7 from stock recovery
Hope this works

Your link to everything about the Defy was very helpful and informative.
Im still on Eclair which seems like that might be the problem, so i guess i need to get Windows...i do have a old Windows XP so will find that old hard drive and boot into that then try the SDlite app and try install a stock 2.2 rom.
At the moment it has a French rom, in English though, so will try find a 2.2 French rom sbf. I think the issue might be 2.1 not being able to use the SD card like 2.2 and up does. Also 2ndInit v2.3 does not work, any other lower version does work, but gives a sd card error.
So my bext question, where do i get a standard 2.2 french rom? There is a link on here, but its the Orange version, not sure if that will be ok.
All i did was root, then 2ndInit. Rooting was a knightmare, eventually used the Motorola1Click Root and that worked, nothing else worked.
Thanks for all your help, knowing all the technical stuff is one thing, knowing all the orders, files and so on is another.

[Q] update CM7 to CM10 after messing up with wrong sbf

Hi everyone,
some time ago I flashed a wrong sbf to my Defy and thanks to the All-in-One Defy Beginner's guide
Zephyrot said:
Installed full Gingerbread SBF and can’t go back to another rom: (!) aha! We have a issue here!, latest Stock Gingerbread full SBFs comes with a Version 5 of the CG, meaning until not long ago you were pretty much screwed. But wait, there is hope! A one kind Éclair has been found in China Defys that comes with Version 5 CG!.
How to fix it:
Method 1:
Download this SBF and Flash it
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup << File is Back, thanks Ichibanme again!>>
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
**NOTE*: I just rephrased the original post since it can be a bit confusing, it is linked as source below.
**NOTE2**: If you are using a non-Chinese defy, DO NOT USE THE CAMERA FLASH while on the Chinese rom, it WILL kill your LED.
Source: ((Original post here))[
Method 2: (BIG thanks to Jebrew again for this one)
NOTE: You are going to need CM7 for this one. CM7 Stable version recommended.
Download this SBF and Flash it.
Root your phone.
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery.
Reboot to CMW recovery, and wipe Data/Cache.
Install CM7 then install Google Apps.
Reboot an go into Stock Recovery (using the vol- button, not from Bootmenu).
Do a Data/Cache Wipe or you won't have any space when you're done.
Flash this Fixed SBF
Reboot into your nice new rom.
Do not Wipe Data anymore or you will have to start again.
​
You WONT be able to install full SBFs of any Éclair or Froyo since these Androids have lower CG Versions.​
Click to expand...
Click to collapse
I'm running CM7 again with a version 5 CG, if I got it right.
So far so good. But now I need to update my ROM to be able to update some apps that won't run on CM7.
So what's the best tactic for updating this messed up phone? Just flashing any CM10+ ROM (I tried several ones) didn't seem to work. I always got stucked at the red Motorola 'M'.
Any ideas?
Thanks a lot!
Cheers,
Martin

smashedup said:
I always got stucked at the red Motorola 'M'
Click to expand...
Click to collapse
factory reset

Thanks for your reply.
Besides the fact that I can't go anywhere to do a factory reset as soon as I've updated to something like CM10, I do a lot of resets/wipes on my way to this state (see quoted guide above).

smashedup said:
Thanks for your reply.
Besides the fact that I can't go anywhere to do a factory reset as soon as I've updated to something like CM10, I do a lot of resets/wipes on my way to this state (see quoted guide above).
Click to expand...
Click to collapse
Use Defy full wiper/AROMA wiper to wipe system, data and cache with EXT4. Then immediately flash CM10 and gapps.

hotdog125 said:
Use Defy full wiper/AROMA wiper to wipe system, data and cache with EXT4. Then immediately flash CM10 and gapps.
Click to expand...
Click to collapse
Tried that, but now I always get a Status 7 error message when trying to install (no matter if I wipe with Aroma or in CWM). I found a lot of people with that same problem but no solution for me... I'm wondering why I did not have that status 7 thing before....

smashedup said:
Tried that, but now I always get a Status 7 error message when trying to install (no matter if I wipe with Aroma or in CWM). I found a lot of people with that same problem but no solution for me... I'm wondering why I did not have that status 7 thing before....
Click to expand...
Click to collapse
For some users flashing DFP-231 helped.
Sent from my Nexus 7 using Tapatalk

hotdog125 said:
For some users flashing DFP-231 helped.
Click to expand...
Click to collapse
Thanks for the hint!
But this is a Defy+ sbf and after flashing I might not be able to go back, or not?
From the thread [Q] defy bricked, not even JORDN_U3_97.21.51.sbf helps :
kirov1045 said:
what are the chances it will work? i'll scared i'll totally brick it. it's 100% not a defy+
Click to expand...
Click to collapse
thekguy said:
Zero percent chance of bricking
Only problem is that there may be problems in the stock rom, which can be fixed by installing cm10 or cm10.1
By problem I mean no camera or battery not charging to the full level but again these can be fixed by upgrading to cm10 or 10.1
Click to expand...
Click to collapse
If - for any reason - CM10+ does not work for me, I don't want to deal with these issues...
Or am I getting this wrong?

smashedup said:
Thanks for the hint!
But this is a Defy+ sbf and after flashing I might not be able to go back, or not?
From the thread [Q] defy bricked, not even JORDN_U3_97.21.51.sbf helps :
If - for any reason - CM10+ does not work for me, I don't want to deal with these issues...
Or am I getting this wrong?
Click to expand...
Click to collapse
Well, it helped some people. You can't go back to 2.2 after flashing GB.
Sent from my Nexus 7 using Tapatalk

hotdog125 said:
Well, it helped some people. You can't go back to 2.2 after flashing GB.
Click to expand...
Click to collapse
Thanks for clarifying.
But I just decided to not mess around another time and will stick to my well running CM7.2 for this device. I found a workaround for my app-prob anyway.
Thanks again for help!

[Q] [HELP] Bricked Defy - black screen, white led, no sbf works

Hi all
So, I have a problem with my Defy (MB525 green lens). The best will be, if I'll write my full story. Here is it:
Story
I had Defy with CM 10. It had bloated battery. I wasn't using it for 6 months because I have another phone.
Some time ago, I decided, that I'll give Defy to my grandfather. On Tuesday this week I bought new original battery. I put it in the Defy, and charge it. I could boot up my old system as I wrote, CM 10. While it was charging, I detected that I haven't got SD Card. On the other hand, I found some 4GB Samsung SD, which had my father in his Desire. The SD Card had 3 partitions, which I tried to delete, and make only one, with GParted. After I did it, Linux and Windows can't see it. (This is almost other problem, which I'm trying to solve here http://crunchbang.org/forums/viewtopic.php?pid=350683)
But, when I put the CD Card to Defy, in TWRP recovery I could see some strange symbols. I thought, that I can repair something when I wipe SD Card. When the battery charged, I decided to do factory reset and wipe SD card. Here is my first failure. In TWRP I went to custom wipe, and here I marked everything including system and I wiped it. Then I remembered that system is recovery too. TWRP wrote, that everything except SD-Ext and SD was wiped. I known that this will be a problem. Yes, after reboot only Motorola logo without recovery.
I think, there was only one option - flash SBF, which I did. I went to stock bootloader and with sbf flash in Linux, I flashed this:
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
And than this:
CM7RC1.5_16_09_11_custom.sbf
After reboot, I got bootloop. I tried to replace battery, do factory reset but nothing helped. That time I haven't got working card, so I couldn't flash some zip via CWM recovery. Thus, I again flash another SBF, but I don't really remember which. Probably some official CEE Froyo however, I'm not sure.
After that and reboot, I got only black screen with white led lighting while USB was connected. When I wanted to go to stock bootloader, still black screen, but I can flash SBF, and while flashing, screen have brightness and text about flashing.
I knew that this is little hard brick. I again tried to flash other SBF which I have or I downloaded (yes, again I don't know which). One of SBFs which I flashed was some fixed Chinese SBF . That made my defy booting, screen working, but still bootlooping. I couldn't reach any recovery.
Again, I flashed other SBFs, CM's too but nothing worked and I got black screen again.
And this was end of my story.
Current situation
I have Defy (MB525 green lens), with unknown framework an it had only black screen and what only I can do, is break Defy with hammer or flash some SBF.
So, here is list of all SBF files, that I have downloaded and probably tried to flash: (No order)
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
CM7RC1.5_16_09_11_custom.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANO2DE_P048_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P019_A010_HWp3_Service1FF.sbf
DFPRC_U_4.5.3-109_DPP-6-7_SIGNED_USADEFYPRCB1B50AA00A.0R_JRDNGIBRRTGC_P025_A019_HWp3a_Service1FF.sbf
JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF.sbf
JORDN_U3_97.21.51.sbf
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FF.sbf
4.5.1-134-DFP-132-gingerbread-BL6-fixed.sbf
4.5.2-109-DHT-22-gingerbread-BL5-fixed.sbf
3.4.2-177-003-nordic-froyo-fixed.sbf
3.4.2-179-002-tmobile-froyo-fixed.sbf
4.5.1-134-DFP-74-gingerbread-BL5-fixed.sbf
4.5.3-109-DPP-11-gingerbread-BL5-fixed.sbf
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN.sbf
Probably that is all what I have.
I've read many topics with similar problem and guides, but nothing helped me, or SBFs were unavailable.
So, what have I to flash, or which guide to try, if I want working Defy?
Sorry for my not good English
Thanks
UPDATE
sterver1 said:
Wohooo!!
Story
After a long time (4 months)...
Accidentally today I found my favorite custom ROM - MoKee OS, for Defy. I said to myself: "Hm, I have some time... I'll try to flash this MoKee on my Defy and maybe it solve my problem with (not) charging/unknown battery for system."
I picked out box with Defy from drawer, wiped the dust, took the Defy and said: "Sh*t! I haven't got SD Card!" Fortunately I found one. I download MoKee OS zip on that SD Card, put it to Defy, booted to recovery and flash MoKee OS zip. (...with full wipe of course...) Then rebooted to system.
Uselessly. Still unknown battery. "Hmm, It doesn't matter. Maybe here are some new stuffs which can solve my problem." And I continued to finding something, that can solve my problem. After a while I found ROMs with new 3.0 Kernel by Quarx. HERE. I downloaded CM 11 EXPERIMENTAL with this kernel and update recovery and flashed them. I didn't read thread. After reboot system didn't boot up and TWRP was inaccessible. I found why when I read some posts from that thread. HERE. But I couldn't flash that zip via recovery because I couldn't open recovery. So I mount /system to USB from bootloader and added files from zip manually to /system partition. After reboot it jammed on booting up. But TWRP was accessible so I did full wipe and flashed CM 11 EXPERIMENTAL and than that fix zip by @lorcotti. After that it finally booted up and battery was working and charging!
And they all lived happily ever after. :laugh:
SO, If you have some problem as me (unknown battery after flashing GB SBF on MB525), try this:
1. Download recovery and some ROM from [Kernel][GPL] Development 3.0 Kernel and fix from this post.
2. Put all zips on your SD Card.
3. Boot up to recovery.
4. Flash update-recovery.zip.
5. Reboot to recovery.
6. Do full wipe.
7. Flash ROM with 3.0 Kernel.
8. Flash Fix.
9. Wipe cache and dalvik cache.
10. Reboot to system.​
If you want, you can flash GAPPS via recovery too.
But this will not be for daily usage! 3.0 Kernel by Quarx have a lot of bugs!
Thanks all!
Click to expand...
Click to collapse

Yeah!
Today I again tried to flash chines SBF. This one: JDGC_U6_2.13.0 China Unicom Thread/Download !!!BL6 kernel !!!
JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF.sbf
...and now I have bootable phone . I read many topics again and I got to know how to aces stock recovery. So I made wipe on this chines ROM and I can boot without loop, but I can only do emergency call with SIM it is the same. So, now, I don't know, what have I to do/flash, how to root it and flash here custom rom. Can I use SuperOneClick if it probably haven't got turned on USD Debugging?

Back on black
So, I made sbf file with depacker...
CMG39 from JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FF
and all others from JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF except CMG31.
Than the bootscreen changed from chines logo to grey motorola logo and I got Bootloader (9.00) Error A5,70,39,00,27. After that I flashed another sbf and I got Error A5,70,00,00,23. Than I flashed DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf and now I again have only black screen. F*ck!
I tried to flash my made sbf and chines one (JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF) too but nothing...
Really here is nobody who can help please??? I want give Defy as Christmas gift. :crying:

OK, so repetition.
What mistakes I've made
1. I wipe wipe all including system partition in TWRP without any flashable zip on SD card.
2. I continued with flashing original SBF, while I have usable CWM.
3. I flashed many no downgradable GB SBFs.
4. I flashed Defy Plus SBF on Defy.
I hope that there is still hope.
Somehow to downgrade, flash only CWM where I can flash nandroid backup or I don't know what else...

a gingerbread sbf should also work on green lens defy as there is no diff. in hw... instead the cam
have you tried a factory reset in stock recovery after sbf flash ?
Sent from my MB526 using xda app-developers app

Now, after all (which I tried) SBFs I get only black screen. I tried many GB SBFs too, but still black screen...
I'm going to try some another Poland SBFs and than if that won't work, I'll try to flash all in Froyo CEE SBF particularly.
Thanks for your response.

Once you've flashed GB stock sbf you can't go back staight to froyo or else
Read the beginners guide and the SBF matrix sektion carefully.. if you haven't...
Sent from my MB526 using xda app-developers app

DFP 231 has been flashed by you, so no froyo sbf will work. Black screen on dfp 231 indicates some eMMC problem, because bl version is highest(no error possible). IMHO only service centre can disable bl check or replace the main board to fix the problem
The problem should have been solved at the boot loop issue by wiping from stock recovery, no network solved by baseband/radio fixes. Check the rsdlite log file to confirm checksum/access errors. I think that the custom sbf somehow messed up either eMMC or efuse(less likely, unheard of).
For sdcard error wipe everything using hdd llf. If any error persists it's a hardware issue
Sent from my MB526 using Tapatalk 4

@bone101
I know, I read it few times, and I know how it is (not) working. But, after all GB SBFs I got only black screen, so maybe were not correctly flashed... I'm using Linux and here is sbf_flash for flashing SBFs, and in it I can't view informations about phone as in RSD Lite... But maybe, it will work in wine..
Do you now, that if I flashed GB SBF, I have to flash another GB to solve my problem, because no Froyo will work?
@thekguy
I know how I can solve others problems. Only what I need help to solve is black screen.
Can't I flash something which support that high BL or it won't work?

check if you get into Bl. modus
press vol. up & then power button
tell what you see
Sent from my MB526 using xda app-developers app

That's what I'm saying, the black screen problem occurs due to bl version mostly, and you have highest bl, so in theory black screen is impossible. Unfortunately I have never seen in this forum any defy recovering from black screen after flashing dfp231. Check rsd log from windows if possible. Froyo sbf cannot work under any circumstance. You must flash only gb sbf
Sent from my MB526 using Tapatalk 4

@bone101
When I acess bootloader I have only black screen... While flashing I can see
"SW Update
In progress.."
Ok, I have Windows notebook available... Here are device properites from RSD Lite:
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 173002052f066b010000dcff0200
BP Die ID: 0000000000000000000000000000
AP Public ID: d0d8842b4879dd27b9eb94f970fbeec252fcb2f4
BP Public ID: 0000000000000000000000000000000000000000
Click to expand...
Click to collapse
I'm going to try some GB SBFs here...
WOHOOO I've got it! I flashed 231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf and now I have got bootable phone... I'm in the system. I'm going to root it and flash CWM and MIUI if it will work.
Really thanks for your help!

sterver1 said:
@bone101
When I acess bootloader I have only black screen... While flashing I can see
"SW Update
In progress.."
Ok, I have Windows notebook available... Here are device properites from RSD Lite:
I'm going to try some GB SBFs here...
WOHOOO I've got it! I flashed 231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf and now I have got bootable phone... I'm in the system. I'm going to root it and flash CWM and MIUI if it will work.
Really thanks for your help!
Click to expand...
Click to collapse
I'm stuck in same problem, downloading this sbf you mention before, hope it works. Fu^kin defy, it sucks

@Alejandrissimo
Good luck...
I have another problem. Now, I have GB kernel. In original 2.3.6 GB on MB525 green camera don't work, and battery too. So, I thought that, when I flash Froyo kernel (CM) and CM7 I got back Froyo kernel and working camera and battery. Yes, this was not possible. After I did it and rebooted it I got Bootloader error. I flashed DFP-231 again. Worked.
Than I tried restore Froyo from nandroid which I found something here on forum. Than I flashed CM7 and bootloader error again.
Now I have CM7 by Maniac for defy plus which worked well except camera and battery... I know that here are many topics about downgrading, camera fixing and others but all which I read are bad in something for me...
Here are some options what I found but I don't know if I can use one:
Method 2: (BIG thanks to Jebrew again for this one)
NOTE: You are going to need CM7 for this one. CM7 Stable version recommended.
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=1216982
DOWNGRADE
If you come from Android 2.1 and never flashed Android 2.2 you can use the fixed sbf-files method. With this method you will have a option to downgrade to you personal stock Android 2.1 via direct sbf flash.
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=966537 but I'v ever flashed Android 2.2.
Or http://forum.xda-developers.com/showthread.php?t=1465436 ... This is better option but I have flashed full 2.3.6 SBF and here is:
It will only work if you never flashed a Android 2.3.6 full sbf.
Click to expand...
Click to collapse
So, how can I downgrade or repair battery and camera? I don't care whether I have got GB or Froyo kernel if I have working camera and battery.

have you tried cm11 ?
or ms2ginger by walter79
Sent from my MB526 using xda app-developers app

sterver1 said:
@Alejandrissimo
Good luck...
Click to expand...
Click to collapse
Working and rooted, thanks for your help

Alejandrissimo said:
Working and rooted, thanks for your help
Click to expand...
Click to collapse
please see your PN

sterver1 said:
@Alejandrissimo
Good luck...
I have another problem. Now, I have GB kernel. In original 2.3.6 GB on MB525 green camera don't work, and battery too. So, I thought that, when I flash Froyo kernel (CM) and CM7 I got back Froyo kernel and working camera and battery. Yes, this was not possible. After I did it and rebooted it I got Bootloader error. I flashed DFP-231 again. Worked.
Than I tried restore Froyo from nandroid which I found something here on forum. Than I flashed CM7 and bootloader error again.
Now I have CM7 by Maniac for defy plus which worked well except camera and battery... I know that here are many topics about downgrading, camera fixing and others but all which I read are bad in something for me...
Here are some options what I found but I don't know if I can use one:
from http://forum.xda-developers.com/showthread.php?t=1216982
from http://forum.xda-developers.com/showthread.php?t=966537 but I'v ever flashed Android 2.2.
Or http://forum.xda-developers.com/showthread.php?t=1465436 ... This is better option but I have flashed full 2.3.6 SBF and here is:
So, how can I downgrade or repair battery and camera? I don't care whether I have got GB or Froyo kernel if I have working camera and battery.
Click to expand...
Click to collapse
Congrats man! Seems that rsdlite on Windows is the most reliable solution. Now to fix everything just flash cm10 (jelly bean) or later rom. It includes fixes for camera and battery
Again, no downgrading bl(not even jtag will work)
Sent from my MB526 using Tapatalk 4

Oh, ok. I'll try it. Thanks.
Hmm, and than, can I flash CM7 by Maniac or JB/GB WIUI and fixes in CM10 will still working?
Ms2ginger is not good for me because it haven't got slovak language. I'll give defy to my grandfather.
//And now, in Quarx CM 10 my battery don't charge. I tried 2 chargers and charging via USB too.
In options, battery is still "60% - Unknown"
Alejandrissimo said:
Working and rooted, thanks for your help
Click to expand...
Click to collapse
Hehe, I'm glad...

sterver1 said:
Oh, ok. I'll try it. Thanks.
Hmm, and than, can I flash CM7 by Maniac or JB/GB WIUI and fixes in CM10 will still working?
Ms2ginger is not good for me because it haven't got slovak language. I'll give defy to my grandfather.
//And now, in Quarx CM 10 my battery don't charge. I tried 2 chargers and charging via USB too.
In options, battery is still "60% - Unknown"
Hehe, I'm glad...
Click to expand...
Click to collapse
There's a cm7 2ndboot build which should work for you. Try cm10.1 or above, problem should be solved.
JB wiui includes those fixes, as does cm7 2ndboot. I don't think that wiui GB has them. I would personally go for cm10.1 or above
Sent from my MB526 using Tapatalk 4