I have a t-mobile uk atrix which shows failed to boot 4 starting rsd mode,
I tried using RSD to flash a t-mobile sbf but it fails to flash half way and says can't put the phone into bp pass through
ive tried manually charging the battery and following the given steps, but to no avail.
please help
did you unlock bootloader? first b4 trying to flash a sbf?
Sent from my MB860 using Tapatalk
no i didn't
im signed into skype today ill help ya unlock it
Sent from my MB860 using Tapatalk
Related
Hello everyone!
I wanted to flash my milestone 2 with the 2.3.4 sbf file but during the process, an error occured and now, my phone is booting by himself in bootloader mode. I've got this message telling me that the code is corrupted and when i try to flash it using RSD lite, the phone is detected but the process fails every time.
I've looked a bit around on google and the only solution that i found is to boot in OpenRecovery but i can't boot with anything else than Bootloader...
If you have any ideas, i'll be happy to read them. =)
You should probably flash/reflash a Milestone 2 specific SBF file.
Sent from my Transformer TF101 using XDA App
I managed to flash my phone with a 2.2 SBF file but at the end of the process, RSD lite send a message telling me to reboot it manualy. The thing is that now, i can't even turn it on and it's not recognised anymore by my computer...
goeland64 said:
I managed to flash my phone with a 2.2 SBF file but at the end of the process, RSD lite send a message telling me to reboot it manualy. The thing is that now, i can't even turn it on and it's not recognised anymore by my computer...
Click to expand...
Click to collapse
It sounds like the battery got too low. Try using a different battery.
Sent from my DROIDX using XDA App
or by a $5 battery charger from amazon
The battery won't charge but the thing is that just before flashing with the 2.3.4, i had about 50% battery so technicaly, i should have some. I'll try with another battery, i hope it will work. =)
Im using Atrix MB861 Korea version
I has been using it for couple of weeks, it is rooted
i never flash any rom or doing anything related rom
this morning i notice when going SETTING > ABOUT > UPDATE, it has something to update so i downloaded it and it automatically install
but i stuck at '' failed to boot 2 starting rsd mode'' forever
i pull out the battery, it reboot and update and stuck at '' failed to boot 2 starting rsd mode'' again
i did pull out battery several times and still face that problem
anyone please help me, i have not back up my phone yet, i dont wanna lose my data (
help me plz, any comment would be appreciated
Use rsd lite to flash a sbf file that corresponds to your phone, you can find it in the firmware thread in the dev sectiom
Sent from my MB860 using xda premium
Hi
i wonder if anyone could help me please.
i have totaly bricked my defy.
it's the uk version,all i'm getting is the bright white light showing when i connect to pc using the usb connecter.I am using RSD Lite ver5.6 and it detects the phone ok and goes through the process of installing the sbf file but when it finishes and says Pass the phone screen stays blank. i am using Windows 7 and also using the JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.
Could someone out there please help me.
Its no longer bricked. Iv`e managed to unbrick it using a different sbf. Working like a dream again.
Are you trying to downgrade to 2.21? Did you have a higher version installed though sbf before?
Sent from my MB526 using XDA Premium App
shammy35 said:
Hi
i wonder if anyone could help me please.
i have totaly bricked my defy.
it's the uk version,all i'm getting is the bright white light showing when i connect to pc using the usb connecter.I am using RSD Lite ver5.6 and it detects the phone ok and goes through the process of installing the sbf file but when it finishes and says Pass the phone screen stays blank. i am using Windows 7 and also using the JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.
Could someone out there please help me.
Its no longer bricked. Iv`e managed to unbrick it using a different sbf. Working like a dream again.
Click to expand...
Click to collapse
Can you share which sbf you used? I've tried stock and custom sbf's and still have white light and blank screen. Also using windows 7. Exact same problem you described.
Hey all !!! My defy got bricked last week.i tried flashing random sbf's.bt of no use.finaly mb526 blur gb sbf clicked n working like charm....
Sent from my MB525 using xda premium
SBF Source
"sbf droid-developers org" Best Source for SBF Files i found so far. :good:
hello i have got a Q i have a droidx and its stuck in bootloader with the following prompt bootloader 30.04
err:a5,70,70,00,1f
MEM_MAP BLANK
Service req'd
Battery OK
OK to program
Transfer mode:
usb
---------------and thats all. i take the battery out and plug it in and nothing. boots straight into bootloader....
anyone plz help
SBF to the firmware version you were on before. (602 or 621)
Sent from my Galaxy Nexus using Tapatalk 2
thnx
thanks sir i got it running
The other day i tried to root my xt907 using http://forum.xda-developers.com/showthread.php?t=1940630
It didn't work. Now Whenever i turn my phone off it goes to fastboot. I'm tired of holding the three buttons so i can do a normal boot. plus id like to be able to turn my phone off and on normally.
Any kind of help to remove fastboot would we greatly appreciated.
This is what it says when i try to power down:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-1e9f557, 2013-09-26 13:20:55
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
USB Connected
Agian any help would be greatly appreciated.
I don't aim to sound rude but a little research goes a long way... You were on the most recent update which is not rootable.... So... Now you are going to have to RSD the most recent firmware...
Sent from my XT907 using xda app-developers app
Yea....
ezknives said:
I don't aim to sound rude but a little research goes a long way... You were on the most recent update which is not rootable.... So... Now you are going to have to RSD the most recent firmware...
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
You don't sound rude. I do actually do my research. When i was looking for a root method I was forgetting the fact im on 4.1.2
But thanks
Mmmk... Download RSD lite and flash the latest firmware...
http://sbf.droid-developers.org/scorpion_mini_xt907/list.php its the third one I believe...
Sent from my XT907 using xda app-developers app