Database Users

[HELP] Stucked in bootloader mode, code corrupt, enable to flash [HELP]

Hello everyone!
I wanted to flash my milestone 2 with the 2.3.4 sbf file but during the process, an error occured and now, my phone is booting by himself in bootloader mode. I've got this message telling me that the code is corrupted and when i try to flash it using RSD lite, the phone is detected but the process fails every time.
I've looked a bit around on google and the only solution that i found is to boot in OpenRecovery but i can't boot with anything else than Bootloader...
If you have any ideas, i'll be happy to read them. =)

You should probably flash/reflash a Milestone 2 specific SBF file.
Sent from my Transformer TF101 using XDA App

I managed to flash my phone with a 2.2 SBF file but at the end of the process, RSD lite send a message telling me to reboot it manualy. The thing is that now, i can't even turn it on and it's not recognised anymore by my computer...

goeland64 said:
I managed to flash my phone with a 2.2 SBF file but at the end of the process, RSD lite send a message telling me to reboot it manualy. The thing is that now, i can't even turn it on and it's not recognised anymore by my computer...
Click to expand...
Click to collapse
It sounds like the battery got too low. Try using a different battery.
Sent from my DROIDX using XDA App

or by a $5 battery charger from amazon

The battery won't charge but the thing is that just before flashing with the 2.3.4, i had about 50% battery so technicaly, i should have some. I'll try with another battery, i hope it will work. =)

[Q] Motorola Defy Will Not Boot

I flashed a Defy+ rom (2.3.4) on my Defy (MB525), and it worked great. GPS and location finding, however, didn't work. My idea was to flash back to the stock 2.2.1 and restart to get upgraded to a more stable custom Gingerbread rom. The original issue in doing so was that the flash (WajkIUI) was for the MB 526. I was finally able to flash by changing the USB drivers to the MB526 drivers. Much to my dismay, flashing the stock USA TMobile Froyo through RSD Lite (versions 4.6, 4.9, 5.0, 5.3, 5.6) did not work. It will flash, then note it as a "PASS," then the screen on the phone shuts off. I even tried flashing back to the factory stock 2.1 using the same, but to no avail. My phone currently will not turn on at all, though retains the white LED after the power button is pressed if plugged into my PC. I have tried pulling the battery for a few minutes and using the bootloader, but it will not turn on unless connected through the PC. I noticed similar issues in the following threads, and tried the suggested solutions:
http://forum.xda-developers.com/showthread.php?t=1326683
http://forum.xda-developers.com/showthread.php?t=1011554
Any suggestions would be quite appreciated.
Thanks,
TopoCo

was the battery 80% or more when you started the flashing process? I once flashed my defy525 with 30% and didnt even boot (and it doesnt charge with the charger), i had to do a usb-revive charge to the battery then the flashing process completed.

tpc8dd said:
I flashed a Defy+ rom (2.3.4) on my Defy (MB525), and it worked great. GPS and location finding, however, didn't work. My idea was to flash back to the stock 2.2.1 and restart to get upgraded to a more stable custom Gingerbread rom. The original issue in doing so was that the flash (WajkIUI) was for the MB 526. I was finally able to flash by changing the USB drivers to the MB526 drivers. Much to my dismay, flashing the stock USA TMobile Froyo through RSD Lite (versions 4.6, 4.9, 5.0, 5.3, 5.6) did not work. It will flash, then note it as a "PASS," then the screen on the phone shuts off. I even tried flashing back to the factory stock 2.1 using the same, but to no avail. My phone currently will not turn on at all, though retains the white LED after the power button is pressed if plugged into my PC. I have tried pulling the battery for a few minutes and using the bootloader, but it will not turn on unless connected through the PC. I noticed similar issues in the following threads, and tried the suggested solutions:
http://forum.xda-developers.com/showthread.php?t=1326683
http://forum.xda-developers.com/showthread.php?t=1011554
Any suggestions would be quite appreciated.
Thanks,
TopoCo
Click to expand...
Click to collapse
Hi. I have the same problem, I did something wrong whiles chaging from CM7 to MIUI on my Defy. Now I've lost my recovery mode, and only gets a white lite when I connect the device to my laptop and it says connected after flashing the phone following the thread below:
http://forum.xda-developers.com/showthread.php?t=933710
My phone is now dead. Any help please?

adolphstone said:
Hi. I have the same problem, I did something wrong whiles chaging from CM7 to MIUI on my Defy. Now I've lost my recovery mode, and only gets a white lite when I connect the device to my laptop and it says connected after flashing the phone following the thread below:
http://forum.xda-developers.com/showthread.php?t=933710
My phone is now dead. Any help please?
Click to expand...
Click to collapse
flash a sdf whit rsd lite

can u please specify which kind of sdf file to use for my phone. it orginally came with android 2.3 T-Mobile. MB525

i have the same problem... i tried every sbf.. none of them work

Try o2 sbf
Sent from my MB526 using XDA App

hi i have the same problem ; i hd flash my defy with android 2.3.5 and after that i was flashed with 2.2.1 so in the RSD flash he does not boot no recovery no boot loader but whin i conect it with rsd flash he rite s flash simply

All of you guys had the same problem. You tried to downgrade to a lower BL, which is not possible (try using fixed SBF method). You should understand that once you flash GB, it's not possible to downgrade to Froyo.
Sent from my MB526 using Tapatalk

Droid Pro not being picked up by RSD Lite

I've read just about every thread and no luck. I updated to a CM port by vanillaLVL, and forgot to back up.
I want to use an sbf to go back to 2.3.3 so I can start fresh with a better rom because his rom doesnt have good in call volume and messes up my bluetooth.
So far every thread about fixing RSD Lite will not work for me.
RSD Lite will not recognize my Droid pro, whether I use Bootloader, CWM, or Usb Debugging mode while phone is on. I have tried looking at every fix, but nothing works. Any tips on how to fix RSD Lite, or how to fix my phone to get it back to stock? I tried using update.zips but I always get an error in the build.prop stopping the update.

Cortal said:
I've read just about every thread and no luck. I updated to a CM port by vanillaLVL, and forgot to back up.
I want to use an sbf to go back to 2.3.3 so I can start fresh with a better rom because his rom doesnt have good in call volume and messes up my bluetooth.
So far every thread about fixing RSD Lite will not work for me.
RSD Lite will not recognize my Droid pro, whether I use Bootloader, CWM, or Usb Debugging mode while phone is on. I have tried looking at every fix, but nothing works. Any tips on how to fix RSD Lite, or how to fix my phone to get it back to stock? I tried using update.zips but I always get an error in the build.prop stopping the update.
Click to expand...
Click to collapse
When i BSF mine i used version 5.6, do you have Moto drivers installed? also just in case make sure you are using a 32 bits version of Windows

I think my windows is 32 bit, and I dled the newest Motorola drivers from the site, but still doesn't work :/ my phone can't access stock recovery either, so might that be causing the issue?
Sent from my DROID Pro using Xparent Red Tapatalk 2

Cortal said:
I think my windows is 32 bit, and I dled the newest Motorola drivers from the site, but still doesn't work :/ my phone can't access stock recovery either, so might that be causing the issue?
Sent from my DROID Pro using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
Hey dude... Okay to start off ill tell you what you need... you need to download the base drivers from motorola and have a 32 bit windows computer... What you want to do from there is uninstall your previous drivers... reboot your pc then install them... reboot your pc... now comes the tricky part... take your droid and hold down the volume keys and the button on the right side of your phone and while holding all thoes down hold the power down too .. wait about 30 secs or till the lcd slightly lites up and let go a simple menu should pop up on your phone... now plug in your phone and wait for 10 min if nothing shows up unplug it and plug it in with a different cord and if nothing pops up in 5 min open rsd lite and your phone should show up... now browse to your .sbf or your .sbf.zip and start the flashing process (just click start)..... tell me if this works please!!!
Sent from my DROID Pro using xda app-developers app

Hate to sound amateur but sometimes its just the specific computer. I bricked my xprt at my friends house and tried to sbf it with his 32 win 7 laptop and the drivers kept failing.
Sent from my Nexus 7 using xda app-developers app

Defy+ black screen WHITE led

Hello guys,
my friend gave me his defy+. I successfully rooted+flashed a new JB rom on it. He was experimenting something, he started to flash another rom on it, and now the device wont even boot. It does nothing, only it shows a white led when it is connected to the PC. The RSD lite recognizes the device.
Is there any solution to fix this or it should fly in the trash?
edit:
I flashed this rom
DEFYPLUS_U3_4_5_1_134_DFP-231_CEE_ROOTED_No_Signed
now the device starts, gets to the Motorola red logo, but then it goes to a black screen, where are these informations.
Bootloader 9.10
Err 46,69,35,00,27
battery OK
Transfer mode USB

Follow this procedure make it work

Vicsa said:
Follow this procedure make it work
Click to expand...
Click to collapse
Vicsa, the thread is pasted is about defy and materijalmen asked about defy+... will it works?
I am facing the same problem...

i have the same problem on defy mb525 red lens
materijalmen said:
Hello guys,
my friend gave me his defy+. I successfully rooted+flashed a new JB rom on it. He was experimenting something, he started to flash another rom on it, and now the device wont even boot. It does nothing, only it shows a white led when it is connected to the PC. The RSD lite recognizes the device.
Is there any solution to fix this or it should fly in the trash?
edit:
I flashed this rom
DEFYPLUS_U3_4_5_1_134_DFP-231_CEE_ROOTED_No_Signed
now the device starts, gets to the Motorola red logo, but then it goes to a black screen, where are these informations.
Bootloader 9.10
Err 46,69,35,00,27
battery OK
Transfer mode USB
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------
i rooted and flashed my defy mb525 and after the rsdlite finished and show me the pass its going to be rebooted and shows nothing and does nothing only the white led is blinking by connecting to the pc
please help me
is there a solution or not ?
email me if someone know a solution to solve it thnx [email protected]

Vicsa said:
Follow this procedure make it work
Click to expand...
Click to collapse
Do you maybe have a link for the motorola defy me525 (since the link was bout Defy plus)?

Defy Plus Bricked
Tungieee said:
Do you maybe have a link for the motorola defy me525 (since the link was bout Defy plus)?
Click to expand...
Click to collapse
Hi,
I'm too facing same issue, Did you found any solution ?
Issue is even when connecting to PC phone is not getting detected hence I could not flash it.

Brick motorola deft mb525

Hi everybody, recently decided to fix up my old motorola defy. Got it up and running with a new housing, lcd and battery. Decided to flash a custom rom, guess what, phone got bricked.
I'm currently stuck with the motorola log in an infinite loop so i cant use the volume down button to restore via my back up. Tired restore in bootloader mode using rsdlite following the steps from here. But Some how rsd lite doesn't detect the phone. Tried most versions and have installed the drivers repeated but nothing works.
Anybody have any good suggestions as to what i should do? dont really wanna use it as a paper weight. Thanks for reading.

Bump!

Uizpall said:
Hi everybody, recently decided to fix up my old motorola defy. Got it up and running with a new housing, lcd and battery. Decided to flash a custom rom, guess what, phone got bricked.
I'm currently stuck with the motorola log in an infinite loop so i cant use the volume down button to restore via my back up. Tired restore in bootloader mode using rsdlite following the steps from here. But Some how rsd lite doesn't detect the phone. Tried most versions and have installed the drivers repeated but nothing works.
Anybody have any good suggestions as to what i should do? dont really wanna use it as a paper weight. Thanks for reading.
Click to expand...
Click to collapse
Flash SBF using RSD Lite, this will fix your problem. Read this guide: https://forum.xda-developers.com/showthread.php?t=1216982

rootdefyxt320 said:
Flash SBF using RSD Lite, this will fix your problem. Read this guide: https://forum.xda-developers.com/showthread.php?t=1216982
Click to expand...
Click to collapse
I tried but my rsd lite doesnt detect my phone, now the battery is flat and cant charge so i cant get into bootloader.

Uizpall said:
I tried but my rsd lite doesnt detect my phone, now the battery is flat and cant charge so i cant get into bootloader.
Click to expand...
Click to collapse
Use Macgyver method.

rootdefyxt320 said:
Flash SBF using RSD Lite, this will fix your problem. Read this guide: https://forum.xda-developers.com/showthread.php?t=1216982
Click to expand...
Click to collapse
rootdefyxt320 said:
Use Macgyver method.
Click to expand...
Click to collapse
My com and rsd still doesnt detect my phone in bootloader mode. Any way around that?