Database Users

[HELP] Stucked in bootloader mode, code corrupt, enable to flash [HELP]

Hello everyone!
I wanted to flash my milestone 2 with the 2.3.4 sbf file but during the process, an error occured and now, my phone is booting by himself in bootloader mode. I've got this message telling me that the code is corrupted and when i try to flash it using RSD lite, the phone is detected but the process fails every time.
I've looked a bit around on google and the only solution that i found is to boot in OpenRecovery but i can't boot with anything else than Bootloader...
If you have any ideas, i'll be happy to read them. =)

You should probably flash/reflash a Milestone 2 specific SBF file.
Sent from my Transformer TF101 using XDA App

I managed to flash my phone with a 2.2 SBF file but at the end of the process, RSD lite send a message telling me to reboot it manualy. The thing is that now, i can't even turn it on and it's not recognised anymore by my computer...

goeland64 said:
I managed to flash my phone with a 2.2 SBF file but at the end of the process, RSD lite send a message telling me to reboot it manualy. The thing is that now, i can't even turn it on and it's not recognised anymore by my computer...
Click to expand...
Click to collapse
It sounds like the battery got too low. Try using a different battery.
Sent from my DROIDX using XDA App

or by a $5 battery charger from amazon

The battery won't charge but the thing is that just before flashing with the 2.3.4, i had about 50% battery so technicaly, i should have some. I'll try with another battery, i hope it will work. =)

failed to boot 4 starting rsd mode NOT GOING????

I have a t-mobile uk atrix which shows failed to boot 4 starting rsd mode,
I tried using RSD to flash a t-mobile sbf but it fails to flash half way and says can't put the phone into bp pass through
ive tried manually charging the battery and following the given steps, but to no avail.
please help

did you unlock bootloader? first b4 trying to flash a sbf?
Sent from my MB860 using Tapatalk

no i didn't

im signed into skype today ill help ya unlock it
Sent from my MB860 using Tapatalk

[Q] battery shown invalid after downgrade from 4.0.4 to 2.3.4

i flashed my defy plus with this : http://forum.xda-developers.com/showthread.php?t=1432100
it worked well..but was laggy n it did get reboot atleast twice a day..
so i decided to downgrade to my old firmware.
i had taken nandroid back up before flashing it to ics.
so i restored my old firmware and then when the fone started it showed "?" (question mark) on the battery sign
when connected to the battery it said invalid battery.. n replace ur battery by original motorola battery.
i already un rooted my fone and made it clean..left with 15% battery now and its not charging by any means!
kindly help..
i cant go back to ics also since no battery left!
pls reply asap.. thank you

should i flash the original sbf via rsd lite?
but i cant since its not reading the usb too!
nor can i go back to ics 4.0.4 n try something since the fone is unrooted now
pls help guys...
i charged my battery via the external universal adapter ...but what now?
i cant connect to pc..usb not getting detected! so how do i root or flash sbf via rsd lite or anything? :/
pls help

mananbhanu said:
should i flash the original sbf via rsd lite?
but i cant since its not reading the usb too!
nor can i go back to ics 4.0.4 n try something since the fone is unrooted now
pls help guys...
i charged my battery via the external universal adapter ...but what now?
i cant connect to pc..usb not getting detected! so how do i root or flash sbf via rsd lite or anything? :/
pls help
Click to expand...
Click to collapse
How to flash your DEFY+ via RSD lite.
Prerequisites:
RSD lite v5.3.1 (or later); MotoDev USB drivers ( http://bit.ly/K59zlZ );
1.Goto recovery.
2. Do wipe cache
3. Do wipe data/factory reset
4. Take your battery out.
5. Hold down Volume Up and Power button and put the battery back in while holding the buttons - your phone will start in bootloader mode
6. Connect the phone which is now in the Bootloader mode to the PC
7. Start RSD lite and select the sbf file (it is recommended that you should put the file in root C:/ on your PC and rename it to something short (GB.sbf)
8. Click "Start"
9. You can see "SW Update in progress" on your phone's screen - the flashing is in process
10. The flashing process takes around 5 minutes, after which RSD lite will reboot your phone
11. Wait until RSD lite says "PASS!" and then you're free to disconnect your phone (*if RSD lite doesn't say "PASS!" after 2-3 minutes and your phone has booted up, you're still free to disconnect)

thanks alot buddy
but just wanted to ask that..im not getting my previous version of custom rom from the site..n the nandroid backup is also faulty..
so is it okay if i flash some other version via the rsd lite?
sorry but im kinda unknown about it...
thanks in advance

u will get indian sbf in the forum..search..flash it..
then start all the process again

R2D2 - Bootlooping, SBF failed 0x70BE

Hey there!
My beloved Droid R2D2 seems to be ailing in the form of being bricked. Nothing happened to it, it just decided that today (really three days ago) was a good day to get stuck in Bootloader on infinite loop. The battery is fully charged, whenever I turn on the phone it goes to:
Bootloader
D2.37
Battery OK
OK to Program
Connect USB
Data Cable
I can get into both Recovery and Bootloader the normal way (I've tried wiping my cache and setting it back to factory settings already) but can't seem to get to anything else.
I tried SBFing it using RSDLite v5.6 with the most recent drivers installed and the SBF file from the lovely droid developers site (specifically the 2.3.4 version). It gets to 100%, the phone restarts, but then I'm presented with the message:
Error switching phone to BP Pass through mode (0x70BE); phone connected
and a big FAIL in the Result box.
I've been looking all over for solutions so I wouldn't have to post this, but it seems everyone else has errors or corrupted codes with their bootloader, whereas mine seems to think it's okay.
I absolutely adore this phone and am by no means ready to give it up (they've even stopped producing them so any new phone would have to be a plain old regular Droid2...), so any help would be unbelievably appreciated!

http://droid.koumakan.jp/wiki/SBF
Note: Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly. In such case, the flashing process will abort, and your phone won't be able to boot normally. RSDLite shows the following error message:
Error switching phone to BP Pass through mode
To get around this issue, once you get a Device driver could not be installed message from Windows, don't close RSDLite nor power off the phone. Start Motorola Driver Installer once again, and let it finish. Then if RSDLite didn't timeout yet, head to Device Manager, find the Unknown device, and in its properties' Driver tab click Update driver…. It should now install normally. If RSDLite timed out and you got an error from it, just repeat the SBF process. The driver should now be present, and the flashing process will finish normally.
Once the flashing process is complete, RSDLite will tell you to “power the phone up manually”. In most cases you won't be able to do this straight as instructed: the phone will be bootlooping. Take the battery out, and then place it back in. Press the lock/power button: the phone should boot normally.
Close RSDLite. Disregard the warning about flashing not being completed since your phone has already booted into Android.
In case you still get bootloops after pulling the battery, refer to Android Recovery.
Click to expand...
Click to collapse
if you still no luck, to ezSBF
http://www.droidforums.net/forum/droid-2-hacks/161849-tool-ezsbf.html

Ah! ezSBF worked! This is both wonderful and unfortunate (I ordered a droid 4 to replace my phone deciding it really was dead so now I have to figure out whether to switch to the 4 or send it back for a few more months in the hopes that its price goes down a bit more...) but mostly really good to see old R2 alive and well again. Thanks!

ezsbf has helped a lot of people
Sent from my MB870 using xda premium

so i have a questions. i got mine rooted and deleted something i shouldnt have deleted. so i sbf back to stock. its says that the flash was successful but my r2d2 keeps bootlooping. any ideas

Which sbf did you flash?
Sent from my DROID2 using Tapatalk 2

did you try wiping cache or data?

delete this

jwagman1 said:
delete this
Click to expand...
Click to collapse
you decide to to read the thread? like 4 posts up

Bricked Defy. Please help!

Hello,
Moderators: Am reposting since I did not get any reply. If you feel otherwise please delete.
Phone: Motorola Defy mb525 US TMobile(Currently being used in India)
Build number: 3.4.2-107 idn-9
I was trying to look for some applications that could take backup of my existing ROM when I forgot to turn off debugging during reboot after installing 2ndInit. Now I am unable to boot it up and it reboots after M logo. I tried fastboot but get only Android System Recovery. I have tried the following without any success.
1. RSD Lite: I dont see my phone in the device properties when I connect it to Windows after fast boot. Clicking Start and Show Device button does nothing.
2. Had battery drain problem but managed to get it charged using macgyver battery charge method.
Can some one really tell me how do I fix this?
Would appreciate your response.
I really need my phone back.
Srinivas

You will need to correctly install the necessary drivers, and use latest version of rsd lite. Also try with another computer. Another option would be to try to wipe data from stock recovery
Sent from my MB526 using xda premium