When I try to install a new android build, it boots linux, then stops at the command "Jumping to KERNEL1 (custom)" It has been happening on MDeeJay's FroYo Sense Revolution v.1.5. Any Ideas?
edit: just formated my sd card and it is still doing it. please help!
Dear xda users,
My Girlfriend got a HD2 and I installed Android on it.
She used SD versions but she kills them everytime.
After a month the phone got stock on boot screen.
Then i tried to install NAND Roms but after 2 months of smooth running the same problem again... (example: Coredroid, and sense roms)
I think that the problem is that when the phone freeze she pull the battery out and after a few times the phone won't boot anymore.
Followed all the noob friendly guides.
Followed all the instructions in the post of every rom.
Installed the recommed radio, MAGDLR, CMW, data partions that were in the instructions
Common problem on sense roms?
Should i try to install no sense rom?
(Got experience with Desire HD flashing and Touch pro 2)
joostnl said:
Dear xda users,
My Girlfriend got a HD2 and I installed Android on it.
She used SD versions but she kills them everytime.
After a month the phone got stock on boot screen.
Then i tried to install NAND Roms but after 2 months of smooth running the same problem again... (example: Coredroid, and sense roms)
I think that the problem is that when the phone freeze she pull the battery out and after a few times the phone won't boot anymore.
Followed all the noob friendly guides.
Followed all the instructions in the post of every rom.
Installed the recommed radio, MAGDLR, CMW, data partions that were in the instructions
Common problem on sense roms?
Should i try to install no sense rom?
(Got experience with Desire HD flashing and Touch pro 2)
Click to expand...
Click to collapse
Hi,
It could be that with all the battery pulling, that the pins could be bent.
Make sure they are all straight.
Buy her an iphone, then she can't pull the battery! :-D
Sent from my HD2 using XDA App
malybru said:
Hi,
It could be that with all the battery pulling, that the pins could be bent.
Make sure they are all straight.
Click to expand...
Click to collapse
I don't think it's hardware related.. Because i can boot in the MAGLDR without any problems.. But when i wan't to boot android it hangs on the coredroid boot logo
(This happends with all roms (sense) i tried so far)
Boot into magldr and re run the rom from there,cleare the caches firsr ot course
Then glue the battery in - buy a tazer and promise her a double dose if she pulls the battery again
lol, hahaha
joostnl said:
I don't think it's hardware related.. Because i can boot in the MAGLDR without any problems.. But when i wan't to boot android it hangs on the coredroid boot logo
(This happends with all roms (sense) i tried so far)
Click to expand...
Click to collapse
ive seen a few posts where people have struggled with getting past boot logo, think it was fine after using a different partition in recovery but as your device is for the sd build am not quite sure how that works as Ive never had sd android or if having sd requires clockwork mod recovery? if so try different partition as i said earlier if not hang on till someone has the answer
johnerz said:
Boot into magldr and re run the rom from there,cleare the caches firsr ot course
Then glue the battery in - buy a tazer and promise her a double dose if she pulls the battery again
Click to expand...
Click to collapse
haha great answer, my girlfriend doesn't touch my hd2 or she gets alot more than a double dose with the tazer method, HD2 is not the solution for a women... you take the hd2 of her and buy her a iphone surly they are women material.
Ignore Post
Problems almost always occur after a few weeks or months of use for me, just reflash the ROM, and you'll good to go.
removing the battery is not recommended, it can corrupt files on the sd-card. Try to boot without sd-card and see if it helps. If your ROM does boot, it means the SD card is corrupted, you can try to backup the SD card and restore it after completely wiping the sd-card.
If your rom doesn't boot, than it meant there's something else going on, maybe corrupted flash, so reflash and try again. This will delete all your data, so be careful
if your girlfriend is not an daily flasher also might i suggest using a daf build. All the configuration is done for you. if you are using a sd build from magldr than make sure you change the name of the build than edit the startup txt like this "rel_path=whatever you name the build(example: "rel_path=MIUIROM nand_boot=1") the 1 for magldr 0 for windows 6.5. the reason for me saying this is all android builds create a folder android when they boot up with all your info like data and cache is in there. So its best to separate the two just in case you want to boot up more than two builds from sd.
Same here.
could be a bad block in your NAND memory. you can check this with cLK and fastboot.
see this post: http://forum.xda-developers.com/showpost.php?p=13600733&postcount=9
i checked mine and there was a bad block in the userdata. i think that is wy my phone was freezing.
now i have flashed cLK and untill now its working great!
Hello everybody,
I can't seem to find an answer to this, though it seems to be a rather basic question.
Is it possible to run two different Android roms on one HD2?
I am currently running Hyperdroid cm7 (Clk-version) and would like to try either a MIUI Rom or a beta-ICS SD-Version, anyone know if and how this would be possible?
Thanks in advance, JW
sure is, through magldr, choose boot ad sd to boot to sd android, or boot ad nand to boot to nand. then, in magldr - services, you can set which you preffer to auto boot, or you can set it to always show the magldr menu and let you decide which to boot.
Thanks for the answer, though I'm not sure I'm willing to go back to Magldr, i like being able to charge my phone while its off.
Thank you though
and just how often is your phone off? mine hasnt been off for, oh, 18 months,,,
You are right on that one, but when I was used Magldr I used to be paranoid about my battery dying since I would have to somehow turn my phone on so it can charge (I am not sure if that would even be a problem, but I feel safe now ) - hope you understand what I mean - in my head it kinda makes sense^^
hehe, in teh event of a dead battery, an old usb cable with teh end cut off, red and black wires bared and held to the battery + and - for 60 seconds will give the battery enough juice to start booting and charging starts halfway thru booting.
JimWest7997 said:
You are right on that one, but when I was used Magldr I used to be paranoid about my battery dying since I would have to somehow turn my phone on so it can charge (I am not sure if that would even be a problem, but I feel safe now ) - hope you understand what I mean - in my head it kinda makes sense^^
Click to expand...
Click to collapse
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
I have been considering dual booting from SD and nand. Is it possible to have it automatically boot from the rom on the SD?
Sent from my HD2
oroo708 said:
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
Click to expand...
Click to collapse
Did you boot into MAGLDR, select AD SD Dir then boot into AD SD? If not, try booting into MAGLDR then selecting boot AD SD, should work
michaelnv710 said:
I have been considering dual booting from SD and nand. Is it possible to have it automatically boot from the rom on the SD?
Sent from my HD2
Click to expand...
Click to collapse
Yes, just go into bootsettings in Services (in MAGLDR) then select AD SD.
oroo708 said:
i have been using Magldr only since nov11. everytime my phone out,just plug it it,n it will auto boot.
nwy got a problem here,
i've been using ICS beta on NAND, then tried to install sense on SD.but after bootanimation finish,its not running sense(SD), its running the ICS.
do u guys now whats the problem??
Click to expand...
Click to collapse
I was running WP7 and SD AS for long time and wanted to try NAND but when I tried to boot from SD again it would boot loop NAND boot screen. I flashed WP7 back to NAND and SD works, so I think there is something in the boot partition to allow for SD boot in WP7 build and not in the NAND since most of them use SD-EXT.
I also want to try out ICS, but need easy access to my daily SD (ACA)
I had the same problem. I learned only few Kernels are able to boot SD Builds via Magldr, as described in following thread: http://forum.xda-developers.com/showthread.php?t=1375554
I changed to a different Kernel that actually worked for me. But now I stuck at another problem. I wanted to apply a glitch fix but it seems that broke my SD AD .
war_child said:
I had the same problem. I learned only few Kernels are able to boot SD Builds via Magldr, as described in following thread: http://forum.xda-developers.com/showthread.php?t=1375554
I changed to a different Kernel that actually worked for me. But now I stuck at another problem. I wanted to apply a glitch fix but it seems that broke my SD AD .
Click to expand...
Click to collapse
War_child,
Which kernel should be changed then, i'm little confused. The NAND or SD. This might be a dead end since I would like to try ICS on NAND instead of WP7
You have to change the Kernel in SD Android
war_child said:
You have to change the Kernel in SD Android
Click to expand...
Click to collapse
have u tried hastarin kernel??
war_child said:
You have to change the Kernel in SD Android
Click to expand...
Click to collapse
Hmm, so the SD kernel boots fine when WP7 is in NAND but the same kernel doesn't when Android is in NAND. Interesting
oroo708 said:
have u tried hastarin kernel??
Click to expand...
Click to collapse
I tried 3Dak's R2.9, but I think as I now have to reinstall SD AD I will try hastarin.
... Hmm, so the SD kernel boots fine when WP7 is in NAND but the same kernel doesn't when Android is in NAND. Interesting
Click to expand...
Click to collapse
Seems like the other Kernels are scanning NAND for Android and only if nothing is found they boot from SD. But I'm no dev so it's just a guess
hi guys, new on this forum, today i tried to install an ICS rom on sd using new ultimate port-a-droid, but stuck at bootscreen.
I have miui on nand.
the rom I used is iceCreamTosti, last version...unpack the rom and port-a-droid zip on "ics" folder, than boot from sd...
think this post could be useful
Hi throcker,
I didn't use port-a-droid but it seems to need wm in NAND not miui android.
If you want to taste ICS on SD try Tytung's ICS-4.0.3-CM9-SD V1.2
http://forum.xda-developers.com/showthread.php?t=1437463
As far as I know Xylograph have only NAND ICS lite version.
yeah, ok, I tried that but there are too many bugs...
anyway, boonbing said that booting on magldr you can't edit the startup.txt file, not that it doesn't work...so, I'm just asking if someone is running fine from magldr
Hey everyone,
I know there's probably another thread out there with this in but searching for a while has been fruitless now - maybe because this question is stupid. However, I'd like to know if it's possible to install an SD build of Android with cLK 1.5 as opposed to magldr. I would task 29 and use magldr, but sense builds don't work with it on my phone for some reason :S Whenever they boot with magldr I get a strange black and white striped screen and the phone bootloops. My fix for that was to try cLK which works perfectly. But I'd like to now install a Sense 4 ROM to my SD card to test it out, whilst keeping a stable sense ROM on my nand, just because it's stable and I don't want to upset the applecart too much
In short - any way to install SD Android ROMs through cLK 1.5?
Thanks!